Davicom DM9161CI Industrial-temperature 10/100 mbps fast ethernet physical layer single chip transceiver Datasheet

DM9161CI
Industrial-Temperature 10/100 Mbps Fast Ethernet Physical Layer Single Chip Transceiver
1.
Features
●
Fully complies with IEEE 802.3 / IEEE
802.3u 10Base-T/ 100Base-TX, ANSI
X3T12 TP-PMD 1995 standards
●
Support HP MDI/MDI-X auto crossover
function (HP Auto-MDIX)
●
Support Auto-Negotiation function,
compliant with IEEE 802.3u
●
LED status outputs indicate Link/ Activity,
Speed10/100 and Full-duplex/Collision.
Support Dual-LED optional control
●
Single low power Supply of 3.3V with an
advanced CMOS technology
●
Lower Power consumption modes:
Fully integrated Physical layer
transceiver On-chip filtering with direct
interface to magnetic transformer
o
Power Reduced mode (cable
detection)
o
Power Down mode
o
Selectable TX drivers for 1:1 or
1.25:1 transformers for additional
power reduction. 1.25: 1
transformers only when HP
Auto-MDIX Disable.
●
Selectable repeater or node mode
●
Selectable MII or RMII (Reduced MII)
mode for 100Base-TX and 10Base-TX.
Selectable MII or GPSI (7-Wired) mode
for 10Base-T
●
Selectable full-duplex or half-duplex
operation
Compatible with 3.3V and 5.0V tolerant
I/Os
●
Supports industrial-temperature (-40℃ ~
+85℃)
●
Pin to pin Compatible with DM9161A/B
●
DSP architecture PHY Transceiver.
●
48-pin LQFP, 0.18um process
●
2.
●
●
MII management interface with
mask-able interrupt output capability
●
Provide Loopback mode for easy system
diagnostics
General Description
DM9161CI is a industrialtemperature physical layer, low power, and
single-chip 10BASE-T/100BASE-TX transceiver
specifically designed for consumer electronics,
industrial, and enterprise applications. Through
using a CMOS process, the DM9161CI has the
advantage of ensuring both high performance
and savings in power consumption.
Through utilization of automatic media speed
and protocol selection, the auto-negotiation
function is strongly supported in the DM9161CI.
Then due to the built-in wave shaping filter, the
DM9161CI has a significant convenience of not
requiring an external filter to transport signals to
the media in 10BASE-T or 100BASE-TX during
Ethernet operation.
Through its Media Independent Interface (MII),
DAVICOM’s
Preliminary
Version: 1.0
2012/2/20
the DM9161CI not only connects the Medium
Access Control (MAC) layer, but the MII also
ensure a high inter-operability and flexibility with
different vendors. In media usage applications,
the DM9161CI provides a direct interface either
to an Unshielded Twisted Pair Category 5 Cable
(UTP5) for 100BASE-TX Fast Ethernet, or an
UTP5/UTP3 Cable for 10BASE-T Ethernet.
The DM9161CI contains the entire physical layer
functions of 100BASE-TX. Those physical layer
functions are defined by IEEE802.3u include the
Physical Coding Sub layer (PCS), Physical
Medium Attachment (PMA), Twisted Pair
Physical Medium Dependent Sub layer
(TP-PMD),
10BASE-TX
Encoder/Decoder
(ENC/DEC), and Twisted Pair Media Access
Unit (TPMAU).
1
DM9161CI
Industrial-Temperature 10/100 Mbps Fast Ethernet Physical Layer Single Chip Transceiver
3.
Applications
●
●
●
●
●
●
●
IP STB
Router
IPC
Internet Radio
4.
Block Diagram
5.
Order Information
Part Number
DM9161CIEP
Pin Count
48
IP CAM
DVR
VoIP CPE (ATA, IP Phone, Video Phone)
Package
LQFP
DAVICOM Semiconductor, Inc.
No.6, Li-Hsin Rd.VI, Science Park, Hsin-Chu, Taiwan, R.O.C.
TEL: 886-3-5798797
FAX: 886-3-5646929
E-mail: [email protected]
Preliminary
Version: 1.0
2012/2/20
2
Similar pages