SMD Super Bright LED Features: • • Standard 0805 package Wide viewing angle OVS-08 Series Cathode Mark Resin Top View Bottom View Radiation Diagrams White Blue / Green / Yellow / Red www.element14.com www.farnell.com www.newark.com Page <1> 11/04/12 V1.1 SMD Super Bright LED Maximum Ratings at Ta = 25°C Reverse Voltage (<100 µA) D.C. Forward Current Pulse Current (Pulse Width of 0.1 ms, 1 / 10 Duty Cycle) Operating Temperature Range Storage Temperature Range Soldering Temperature Reflow Soldering : : : : : : 5V 30 mA 80 mA -30 to +80°C -40 to 85°C 260°C for 10 s Electrical and Optical Characteristics at Ta = 25° C LED Chip Lens Colours Dominant Wavelength (nm) at 20 mA Luminous Intensity (mcd) at 20 mA Forward Voltage (V) at 20 mA Viewing Angle θ1/2 (°) 2θ Part Number Material Emitted Colours Brightness InGaN / Sapphire Blue Mega Water Clear 465 51.6 100 3.2 4 130 OVS-0803 InGaN / Sapphire True Green Mega Water Clear 520 165 300 3.2 4 130 OVS-0804 A1GaInP / Si Yellow Mega Water Clear 589 244 400 2.1 2.5 130 OVS-0806 Lens Colours Co-Ordinates for CIE Chromaticity at 20 mA Viewing Angle θ1/2 (°) 2θ Part Number 140 OVS-0801 LED Chip Material Emitted Colours Brightness InGaN / Sapphire White Mega Minimum Typical Minimum Typical Luminous Intensity (mcd) at 20 mA Forward Voltage (V) at 20 mA X Axis Y Axis Minimum Typical Minimum Typical Water Clear 0.31 0.3 244 400 3.2 4 Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <2> 11/04/12 V1.1