H11G1M, H11G2M, H11G3M High Voltage Photodarlington Optocouplers Features General Description ■ High BVCEO The H11GXM series are photodarlington-type optically coupled optocouplers. These devices have a gallium arsenide infrared emitting diode coupled with a silicon darlington connected phototransistor which has an integral base-emitter resistor to optimize elevated temperature characteristics. ■ ■ ■ ■ – Minimum 100V for H11G1M – Minimum 80V for H11G2M – Minimum 55V for H11G3M High sensitivity to low input current (Min. 500% CTR at IF = 1mA) Low leakage current at elevated temperature (Max. 100µA at 80°C) Underwriters Laboratory (UL) recognized File # E90700, Volume 2 IEC 60747-5-2 approved (ordering option V) Applications ■ CMOS logic interface ■ Telephone ring detector ■ Low input TTL interface ■ Power supply isolation ■ Replace pulse transformer Schematic ANODE 1 CATHODE 2 N/C 3 ©2007 Fairchild Semiconductor Corporation H11G1M, H11G2M, H11G3M Rev. 1.0.4 Package Outlines 6 BASE 5 COLLECTOR 4 EMITTER www.fairchildsemi.com H11G1M, H11G2M, H11G3M — High Voltage Photodarlington Optocouplers September 2009 Symbol Parameter Value Units TOTAL DEVICE TSTG Storage Temperature -40 to +150 °C TOPR Operating Temperature -40 to +100 °C TSOL 260 for 10 sec °C 260 mW Derate Above 25°C 3.5 mW/°C IF Forward Input Current 60 mA VR Reverse Input Voltage 6.0 V Forward Current – Peak (1µs pulse, 300pps) 3.0 A LED Power Dissipation @ TA = 25°C 100 mW 1.8 mW/°C H11G1M 100 V H11G2M 80 H11G3M 55 PD Lead Solder Temperature (Wave Solder) Total Device Power Dissipation @ TA = 25°C EMITTER IF(pk) PD Derate Above 25°C DETECTOR VCEO PD Collector-Emitter Voltage Photodetector Power Dissipation @ TA = 25°C Derate Above 25°C ©2007 Fairchild Semiconductor Corporation H11G1M, H11G2M, H11G3M Rev. 1.0.4 200 mW 2.67 mW/°C www.fairchildsemi.com 2 H11G1M, H11G2M, H11G3M — High Voltage Photodarlington Optocouplers Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Individual Component Characteristics Symbol Characteristic Test Conditions Device Min. Typ.* Max. Unit All 1.3 1.50 All -1.8 mV/°C 25 V 50 pF EMITTER VF Forward Voltage ∆VF ∆TA Forward Voltage Temp. Coefficient IF = 10mA BVR Reverse Breakdown Voltage IR = 10µA All CJ Junction Capacitance VF = 0V, f = 1MHz All 3.0 VF = 1V, f = 1MHz IR Reverse Leakage Current V 65 VR = 3.0V All 0.001 10 µA DETECTOR BVCEO BVCBO BVEBO ICEO Breakdown Voltage Collector to Emitter Collector to Base IC = 1.0mA, IF = 0 IC = 100µA H11G1M 100 H11G2M 80 H11G3M 55 H11G1M 100 H11G2M 80 H11G3M 55 All 7 Emitter to Base Leakage Current Collector to Emitter VCE = 80V, IF = 0 H11G1M VCE = 60V, IF = 0 H11G2M VCE = 30V, IF = 0 H11G3M VCE = 80V, IF = 0, TA = 80°C H11G1M VCE = 60V, IF = 0, TA = 80°C H11G2M V V 10 V 100 nA 100 µA Transfer Characteristics Symbol Characteristics Test Conditions Device Min. Typ.* IF = 10mA, VCE = 1V H11G1M/2M 100 (1000) IF = 1mA, VCE = 5V H11G1M/2M 5 (500) H11G3M 2 (200) Max. Units EMITTER CTR VCE(SAT) Current Transfer Ratio, Collector to Emitter Saturation Voltage mA (%) IF = 16mA, IC = 50mA H11G1M/2M 0.85 1.0 IF = 1mA, IC = 1mA H11G1M/2M 0.75 1.0 H11G3M 0.85 1.2 IF = 20mA, IC = 50mA V SWITCHING TIMES tON Turn-on Time tOFF Turn-off Time RL = 100Ω, IF = 10mA, VCE = 5V, f ≤ 30Hz, Pulse Width ≤ 300µs All 5 µs All 100 µs Isolation Characteristics Symbol Device Min. VISO Isolation Voltage Characteristic f = 60Hz, t = 1 sec. Test Conditions All 7500 Typ.* VACPEAK RISO Isolation Resistance VI-O = 500 VDC All 1011 Ω CISO Isolation Capacitance f = 1MHz All 0.2 Max. Units pF *All Typical values at TA = 25°C ©2007 Fairchild Semiconductor Corporation H11G1M, H11G2M, H11G3M Rev. 1.0.4 www.fairchildsemi.com 3 H11G1M, H11G2M, H11G3M — High Voltage Photodarlington Optocouplers Electrical Characteristics (TA = 25°C unless otherwise specified.) As per IEC 60747-5-2, this optocoupler is suitable for “safe electrical insulation” only within the safety limit data. Compliance with the safety ratings shall be ensured by means of protective circuits. Symbol Parameter Min. Typ. Max. Unit Installation Classifications per DIN VDE 0110/1.89 Table 1 For Rated Main Voltage < 150Vrms I-IV For Rated Main voltage < 300Vrms I-IV Climatic Classification 55/100/21 Pollution Degree (DIN VDE 0110/1.89) 2 CTI Comparative Tracking Index 175 VPR Input to Output Test Voltage, Method b, VIORM x 1.875 = VPR, 100% Production Test with tm = 1 sec, Partial Discharge < 5pC 1594 Vpeak Input to Output Test Voltage, Method a, VIORM x 1.5 = VPR, Type and Sample Test with tm = 60 sec, Partial Discharge < 5pC 1275 Vpeak VIORM Max. Working Insulation Voltage 850 Vpeak VIOTM Highest Allowable Over Voltage 6000 Vpeak External Creepage 7 mm External Clearance 7 mm Insulation Thickness 0.5 mm Insulation Resistance at Ts, VIO = 500V 109 Ω RIO ©2007 Fairchild Semiconductor Corporation H11G1M, H11G2M, H11G3M Rev. 1.0.4 www.fairchildsemi.com 4 H11G1M, H11G2M, H11G3M — High Voltage Photodarlington Optocouplers Safety and Insulation Ratings Fig. 2 Normalized Output Current vs. Temperature Fig. 1 Output Current vs. Input Current 100 IC – NORMALIZED OUTPUT CURRENT IC – NORMALIZED OUTPUT CURRENT 10 1 Normalized to: VCE = 5V IF = 1mA 0.1 0.01 0.001 0.1 1 IF = 50mA 10 IF = 5mA IF = 1mA 1 IF = 0.5mA 0.1 0.01 -60 10 -40 0 20 40 60 80 100 120 90 100 Fig. 4 Collector-Emitter Dark Current vs. Ambient Temperature Fig. 3 Output Current vs. Collector - Emitter Voltage 1000 100 Normalized to: VCE = 5V IF = 1mA TA = 25˚C IF = 50mA ICEO – DARK CURRENT (nA) IC – NORMALIZED OUTPUT CURRENT -20 TA – AMBIENT TEMPERATURE (˚C) IF – LED INPUT CURRENT(mA) 10 Normalized to: VCE = 5V IF = 1mA TA = 25˚C IF = 10mA IF = 2mA IF = 1mA 1 IF = 0.5mA 0.1 VCE = 80V 100 VCE = 30V 10 VCE = 10V 1 0.1 0.01 0.01 1 0 10 10 20 30 40 50 60 70 80 TA – AMBIENT TEMPERATURE (˚C) VCE – COLLECTOR – EMITTER VOLTAGE (V) Fig. 5 Input Current vs. Total Switching Speed (Typical Values) IF – FORWARD CURRENT (mA) 10 RL = 10Ω RL = 100Ω RL = 1kΩ 1 Normalized to: VCC = 5V IF = 10mA RL = 100Ω 0.1 0.1 1 10 ton + toff – TOTAL SWITCHING SPEED (NORMALIZED) ©2007 Fairchild Semiconductor Corporation H11G1M, H11G2M, H11G3M Rev. 1.0.4 www.fairchildsemi.com 5 H11G1M, H11G2M, H11G3M — High Voltage Photodarlington Optocouplers Typical Performance Curves Through Hole 0.4" Lead Spacing 8.13–8.89 6 4 8.13–8.89 6 4 1 3 6.10–6.60 6.10–6.60 Pin 1 1 3 Pin 1 5.08 (Max.) 0.25–0.36 7.62 (Typ.) 3.28–3.53 5.08 (Max.) 0.25–0.36 3.28–3.53 0.38 (Min.) 2.54–3.81 0.38 (Min.) 2.54–3.81 0.20–0.30 2.54 (Bsc) (0.86) 15° (Typ.) 2.54 (Bsc) (0.86) 0.41–0.51 1.02–1.78 0.20–0.30 0.41–0.51 0.76–1.14 10.16–10.80 1.02–1.78 0.76–1.14 Surface Mount (1.78) 8.13–8.89 6 4 (1.52) (2.54) (7.49) 6.10–6.60 8.43–9.90 (10.54) 1 3 (0.76) Pin 1 Rcommended Pad Layout 0.25–0.36 3.28–3.53 5.08 (Max.) 0.38 (Min.) 0.20–0.30 2.54 (Bsc) (0.86) 0.16–0.88 (8.13) 0.41–0.51 1.02–1.78 0.76–1.14 Note: All dimensions in mm. ©2007 Fairchild Semiconductor Corporation H11G1M, H11G2M, H11G3M Rev. 1.0.4 www.fairchildsemi.com 6 H11G1M, H11G2M, H11G3M — High Voltage Photodarlington Optocouplers Package Dimensions Option Order Entry Identifier (Example) No option H11G1M S H11G1SM SR2 H11G1SR2M T H11G1TM 0.4" Lead Spacing V H11G1VM VDE 0884 TV H11G1TVM VDE 0884, 0.4" Lead Spacing SV H11G1SVM VDE 0884, Surface Mount SR2V H11G1SR2VM Description Standard Through Hole Device Surface Mount Lead Bend Surface Mount; Tape and Reel VDE 0884, Surface Mount, Tape and Reel Marking Information 1 V 3 H11G1 2 X YY Q 6 4 5 Definitions 1 ©2007 Fairchild Semiconductor Corporation H11G1M, H11G2M, H11G3M Rev. 1.0.4 Fairchild logo 2 Device number 3 VDE mark (Note: Only appears on parts ordered with VDE option – See order entry table) 4 One digit year code, e.g., ‘7’ 5 Two digit work week ranging from ‘01’ to ‘53’ 6 Assembly package code www.fairchildsemi.com 7 H11G1M, H11G2M, H11G3M — High Voltage Photodarlington Optocouplers Ordering Information 12.0 ± 0.1 4.5 ± 0.20 2.0 ± 0.05 Ø1.5 MIN 4.0 ± 0.1 0.30 ± 0.05 1.75 ± 0.10 11.5 ± 1.0 21.0 ± 0.1 9.1 ± 0.20 Ø1.5 ± 0.1/-0 10.1 ± 0.20 0.1 MAX 24.0 ± 0.3 User Direction of Feed Reflow Profile 300 260°C 280 260 >245°C = 42 Sec 240 220 200 180 °C Time above 183°C = 90 Sec 160 140 120 1.822°C/Sec Ramp up rate 100 80 60 40 33 Sec 20 0 0 60 120 180 270 360 Time (s) ©2007 Fairchild Semiconductor Corporation H11G1M, H11G2M, H11G3M Rev. 1.0.4 www.fairchildsemi.com 8 H11G1M, H11G2M, H11G3M — High Voltage Photodarlington Optocouplers Carrier Tape Specification Auto-SPM™ Build it Now™ CorePLUS™ CorePOWER™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK® EfficentMax™ EZSWITCH™* ™* ® ® Fairchild Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore™ FETBench™ FlashWriter®* FPS™ F-PFS™ FRFET® SM Global Power Resource Green FPS™ Green FPS™ e-Series™ Gmax™ GTO™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDrive™ MotionMax™ Motion-SPM™ OPTOLOGIC® ® OPTOPLANAR ® PDP SPM™ Power-SPM™ PowerTrench® PowerXS™ Programmable Active Droop™ QFET® QS™ Quiet Series™ RapidConfigure™ ™ Saving our world, 1mW/W/kW at a time™ SmartMax™ SMART START™ SPM® STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SupreMOS™ SyncFET™ Sync-Lock™ ® * The Power Franchise® TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ TriFault Detect™ TRUECURRENT™* µSerDes™ UHC® Ultra FRFET™ UniFET™ VCX™ VisualMax™ XS™ * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I40 ©2007 Fairchild Semiconductor Corporation H11G1M, H11G2M, H11G3M Rev. 1.0.4 www.fairchildsemi.com 9 H11G1M, H11G2M, H11G3M — High Voltage Photodarlington Optocouplers TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks.