MBRS3045CT Taiwan Semiconductor CREAT BY ART FEATURES Dual Common Cathode Schottky Rectifier - Low power loss, high efficiency - Ideal for automated placement - Guardring for overvoltage protection - High surge current capability - Moisture sensitivity level: level 1, per J-STD-020 - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC - Halogen-free according to IEC 61249-2-21 definition MECHANICAL DATA 2 TO-263AB (D PAK) Case: TO-263AB (D2PAK) Molding compound, UL flammability classification rating 94V-0 Base P/N with suffix "G" on packing code - halogen-free Base P/N with prefix "H" on packing code - AEC-Q101 qualified Terminal: Matte tin plated leads, solderable per JESD22-B102 Meet JESD 201 class 1A whisker test with prefix "H" on packing code meet JESD 201 class 2 whisker test Polarity: As marked Weight: 1.4 g (approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25℃ unless otherwise noted) SYMBOL MBRS3045CT Unit Maximum repetitive peak reverse voltage VRRM 45 V Maximum RMS voltage VRMS 31 V Maximum DC blocking voltage VDC 45 V Maximum average forward rectified current IF(AV) 30 A Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load IFSM 220 A PARAMETER Maximum instantaneous forward voltage (Note 2) IF= 15A @ TJ=25℃ IF= 15A @ TJ=125℃ IF= 30A @ TJ=25℃ IF= 30A @ TJ=125℃ VF Maximum reverse current @ rated VR TJ=25 ℃ TJ=125 ℃ IR 0.2 15 mA Voltage rate of change (Rated VR) dV/dt 10000 V/μs Maximum thermal resistance RθJC RθJA 1.5 50 TJ - 55 to +150 O C TSTG - 55 to +150 O C Operating junction temperature range Storage temperature range 0.70 0.60 V 0.90 0.75 O C/W Note 1: Pulse test with PW=300μs, 1% duty cycle Document Number: DS_D1310007 Version: D13 MBRS3045CT Taiwan Semiconductor ORDERING INFORMATION PART NO. AEC-Q101 PACKING CODE GREEN COMPOUND QUALIFIED MBRS3045CT PACKAGE PACKING D2PAK 800 / 13" Paper reel CODE RN Prefix "H" Suffix "G" C0 2 50 / Tube D PAK EXAMPLE AEC-Q101 PREFERRED P/N PART NO. MBRS3045CT RN MBRS3045CT RN MBRS3045CT RNG MBRS3045CT RN QUALIFIED MBRS3045CTHRN MBRS3045CT GREEN COMPOUND PACKING CODE H DESCRIPTION CODE G Green compound RN AEC-Q101 qualified RATINGS AND CHARACTERISTICS CURVES AVERAGE FORWARD CURRENT (A) FIG.1 FORWARD CURRENT DERATING CURVE 35 30 25 20 15 10 RESISTIVE OR INDUCTIVELOAD WITH HEATSINK 5 0 0 25 50 75 100 125 CASE TEMPERATURE 150 175 PEAK FORWARD SURGE CURRENT (A) (TA=25℃ unless otherwise noted) FIG. 2 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER LEG 250 225 200 175 150 125 100 75 50 25 0 8.3ms Single Half Sine Wave JEDEC Method 1 100 NUMBER OF CYCLES AT 60 Hz FIG. 3 TYPICAL FORWARD CHARACTERISTICS PER LEG FIG. 4 TYPICAL REVERSE CHARACTERISTICS PER LEG 100 100 10 1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 FORWARD VOLTAGE (V) Document Number: DS_D1310007 1 1.1 1.2 INSTANTANEOUS REVERSE CURRENT (mA) INSTANTANEOUS FORWARD CURRENT (A) 10 (oC) 10 1 TJ=125℃ 0.1 0.01 TJ=25℃ 0.001 0.0001 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Version: D13 MBRS3045CT Taiwan Semiconductor FIG. 5 TYPICAL JUNCTION CAPACITANCE PER LEG 10000 TRANSIENT THERMAL IMPEDANCE (℃/W) 100 f=1.0MHz Vsig=50mVp-p JUNCTION CAPACITANCE (pF) FIG. 6 TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG 10 1000 100 0.1 1 10 100 1 0.1 0.01 0.1 1 10 100 T-PULSE DURATION(s) REVERSE VOLTAGE (V) PACKAGE OUTLINE DIMENSIONS DIM. Unit (mm) Unit (inch) Min Max Min Max A - 10.5 - 0.413 B 14.60 15.88 0.575 0.625 C 2.41 2.67 0.095 0.105 D 0.68 0.94 0.027 0.037 E 2.29 2.79 0.090 0.110 F 4.44 4.70 0.175 0.185 G 1.14 1.40 0.045 0.055 H 1.14 1.40 0.045 0.055 I 8.25 9.25 0.325 0.364 J 0.36 0.53 0.014 0.021 K 2.03 2.79 0.080 0.110 SUGGESTED PAD LAYOUT Symbol Unit (mm) Unit (inch) A 10.8 0.425 B 8.3 0.327 C 1.1 0.043 D 3.5 0.138 E 16.9 0.665 F 9.5 0.374 G 2.5 0.098 MARKING DIAGRAM P/N = Specific Device Code G = Green Compound YWW = Date Code F = Factory Code Document Number: DS_D1310007 Version: D13 MBRS3045CT Taiwan Semiconductor CREAT BY ART Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied,to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or seling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. Document Number: DS_D1310007 Version: D13