Amphenol C09111C0030002 Amphenol-tuchel electronics gmbh Datasheet

Amphenol
Amphenol-Tuchel Electronics GmbH
C 091 A/B/D Series
Circular Connectors
The Company
Amphenol-Tuchel Electronics GmbH is a member of the USA based Amphenol
Corporation. With our own global presence we offer our customers exceptional
technical support and service worldwide in the areas of development,
production and distribution. Amphenol-Tuchel Electronics GmbH has a
successful history as a partner to our customers and sets standards for
connector technology.
Quality
From the beginning of the development process, Amphenol-Tuchel Electronics GmbH
gives quality considerations the top priority. Meeting customer requirements is the
main focus of the product development process.
Interdisciplinary project teams with diverse backgrounds from marketing, product
engineering and production guarantee the development and production of robust and
reliable connector solutions.
Our quality assessment begins with the initial contact to the customer and extends
through the life of the product. A satisfied customer is the measure of our success.
We strive to use environmentally friendly processes that minimize the waste of natural
resources and introduction of toxins into the environment.
Certifications: TS 16949
ISO 14001
ISO 9000:2000
2
Amphenol
Content
Page
5
C 091 A
Circular connectors with metal screw coupling and
plastic back shell. Contacts: 2 to 8, 12 and 14,
IP 40 when properly mated.
19
C 091 B
Circular connectors with plastic bayonet coupling
and plastic back shell. Contacts: 3 to 8, 12 and 14.
IP 40 when properly mated.
33
C 091 D
Circular connectors with metal screw coupling and
metal back shell. Contacts: 3 to 8, 12 and 14,
IP 65 and IP 67 when properly mated.
Crimp contacts
43
Accessories
44
Remarks / Safety classification
46
IP Code
47
Summary of Part Numbers
48
Amphenol
3
4
Amphenol
C 091 A
Main Features
• Metal locking ring; screw locking according to DIN EN 60130-9 / IEC 60130-9
• Number of contacts: 2 – 8, 12 and 14 contacts
• Internal strain relief
• Good shielding effectiveness when mated and locked
• Male and female cable connectors
- Straight or right angled
- Solder connection: 2 – 8, 12 and 14 contacts
- Crimp connection: 2 – 8 contacts
- With cable sleeve for max. cable diameter 6 mm, or
- With cable glands for cable diameter 4 – 6 mm or 6 – 8 mm
• Male and female receptacles
- Panel mount types for front or rear panel mounting
- Pcb mount types, straight or right angled
- With dip solder contacts of various contact lengths
- Solder connection: 2 – 8, 12 and 14 contacts
- Crimp connection: 2 – 8 contacts
• Coloured back shells optional
• UL registered under file number E 63 093 UL
1)
UNDERWRITERS LABORATORIES INC.
In general approvals refer to representative versions of the connector series. Test report upon request.
Amphenol
1)
5
C 091 A
Characteristics
General Characteristics
Standard
Number of contacts
Characteristics
2*+ 3
4
5 Stereo
6
41 524 45 322
60130-9 60130-9
7
1
3
4
2
1
IEC 60664-1
Rated voltage
UL 1977
Rated impulse withstand voltage
IEC 60664-1
Pollution degree
IEC 60664-1
1
Installation category
IEC 60664-1
I
Insulation group
IEC 60664-1
II, 400 ≤ CTI < 600
Current rating
IEC 60512-5-2
Test 5 b
UL 1977
Insulation resistance
IEC 60512-3-1
Test 3 a
> 10 10 Ω
Contact resistance
IEC 60512-2-1
Test 2 a
<5mΩ
100 V –~
5
4
3
1
7
5
2
6
8
3
7
45 329 45 326
60130-9 60130-9
–
–
Electrical Characteristics
Rated voltage
300 V –~
2
6
300 V –~
–
–
–
–
150 V –~
100 V –~
60 V
250 V
1500 V
A
6
5
B
1
DC
5
4
2
K
H J
5
3
L
O N
M
2
G
1
A
–
–
4
B
41 524
–
60130-9 60120-9
5
14
E
F
3
4
1
12
L
4
8
DC
1
7
M
K
H J
Contact arrangement acc. to DIN
Contact arrangement acc. to IEC
3
7
4
G
3
2
1
6
E
F
2 3
2
View on termination side
of male contact insert
5
1200 V
1500 V
1200 V
3 A / + 40 °C /
+ 104 °F
5 A / + 40 °C / + 104 °F
please refer also to current derating curves page 45
Climatic Characteristics
Climatic category
IEC 60068-1
40 / 100 / 56
Temperature range
IEC 60068-1
- 40 °C ... + 100 °C / - 40 °F ... + 212 °F
IP-degree
IEC 60529
IP 40
Insertion and withdrawal forces
IEC 60512-13-2
Test 13 b
Mechanical operation
IEC 60512
Test 9 a
Mechanical Characteristics
25 N
90.oz
30 N
110.oz
35 N
125.oz
50 N
180.oz
55 N
200.oz
60 N
220.oz
50 N
180.oz
Silver ≥ 500 mating cycles
Gold ≥ 1000 mating cycles
Materials
Housing material
coupling ring brass, strain relief, die cast, nickel plated
Dielectric material
thermoplastic
Contact plating
silver plated / gold plated **
Further Characteristics
Termination technique
Wire gauge
Flammability
Locking system
solder, crimp
solder
solder: ≤ 0,5 mm2 / 20 AWG
crimp: 2 - 6 pol (excluding 5S): 0,09 - 1,00 mm2 / 28 - 18 AWG
crimp: 5S, 7, 7S and 8-pol.: 0,09 - 0,75 mm2 / 28 - 20 AWG
≤ 0,25 mm 2/ 24 AWG
UL 94 V0
IEC 60130-9
metal screw coupling; tightening torque 0,7 Nm
Caution: Do not connect or disconnect under load. Metal housing parts shall be securely incorporated to protected ground.
* 2 contact version: contact loading 1+3
** Remark for gold plated contacts: In order to avoid brittle inter-metallic connections, gold-plated terminals have to be tin-plated in the solder area.
IEC 60 664 ^
= DIN VDE 0110 ; IEC 60 512-x ^
= DIN EN 60 512-x; IEC 60 130-9 ^
= DIN EN 60 130-9
6
Amphenol
C 091 A
Male cable connector,
screw locking,
straight
Cable diameter 4-6 mm
Description
Drawing
Cable diameter 6-8 mm
No. of
cont.
Male cable connector,
for cable diameter 4-6 mm,
termination: solder or crimp,
contact plating: silver or gold.
67,5
(2.658)
17
(DIA.670)
44,5
(1.752)
Male cable connector,
for cable diameter 6-8 mm,
termination: solder or crimp,
with clamping ring,
contact plating: silver or gold.
62
(2.441)
17
(DIA.670)
53
(2.087)
PG 9
Male cable connector,
for cable diameter 4-6 mm,
termination: solder or crimp,
contact plating: silver or gold.
62
(2.441)
17
(DIA.670)
53
(2.087)
PG 7
67,5
(2.658)
44,5
(1.752)
20
(DIA.788)
Male cable connector,
for cable diameter 4-6 mm,
solder termination,
plastic coated coupling ring,
contact plating: silver.
1)
Please order crimp contacts separately, see page 43
Amphenol
2)
see remark page 5
2
3 3)
4 3)
5
5 S 3)
6 3)
7
7 3)
8 3)
12
14
2
3 3)
4 3)
5
5 S 3)
6 3)
7
7 3)
8 3)
12
14
2
3 3)
4 3)
5
5 S 3)
6 3)
7
7 3)
8 3)
12
14
2
3 3)
4 3)
5
5 S 3)
6 3)
7
7 3)
8 3)
12
14
3)
Cable diameter 4-6 mm
Cable diameter 4-6 mm
Part Number solder termination
Contact plating
Contact plating
silver
gold 2)
T 3200 018
T 3200 001
T 3260 018
T 3260 001
T 3300 018
T 3300 001
T 3360 018
T 3360 001
T 3356 018 4)
T 3360 010
T 3400 001
T 3400 018
T 3475 001
T 3475 018
T 3484 001
T 3484 018 4)
T 3504 001
T 3504 018
T 3635 001
T 3635 000
T 3650 001
T 3650 000
T 3200 002
T 3200 028
T 3260 002
T 3260 028
T 3300 002
T 3300 028
T 3360 002
T 3360 028
T 3360 020
T 3356 028 4)
T 3400 002
T 3400 028
T 3475 002
T 3475 028
T 3484 002
T 3484 028
T 3504 002
T 3504 028
–
T 3635 002
–
T 3650 002
T 3200 004
T 3200 048
T 3260 004
T 3260 048
T 3300 004
T 3300 048
T 3360 004
T 3360 048
T 3356 004
T 3356 048 4)
T 3400 004
T 3400 048
T 3475 004
T 3475 048
T 3484 004
T 3484 048
T 3504 004
T 3504 048
–
T 3635 004
–
T 3650 004
T 3200 013
–
T 3260 013
–
T 3300 013
–
T 3360 013
–
T 3360 130
–
T 3400 013
T 3400 038
T 3475 013
T 3475 038
T 3484 013 4)
–
–
T 3504 013
–
–
–
–
Contact order for DIN EN 60 130-9
4)
Part Number
Crimp termination 1)
–
T 3260 551
T 3300 551
T 3360 551
T 3356 551
T 3400 551
T 3475 551
T 3484 551
T 3504 551
–
–
–
T 3260 552
T 3300 552
T 3360 552
T 3356 552
T 3400 552
T 3475 552
T 3484 552
T 3504 552
–
–
–
T 3260 554
T 3300 554 4)
T 3360 554 4)
T 3356 554
T 3400 554 4)
T 3475 554 4)
T 3484 554 4)
T 3504 554
–
–
–
–
–
–
–
–
–
–
–
–
–
Available upon request.
7
C 091 A
Male cable connector,
screw locking,
right-angled
Description
Drawing
Male cable connector,
right-angled,
for cable diameter 4-6 mm,
termination: solder or crimp,
contact plating: silver or gold.
No. of
cont.
Part Number solder termination
Contact plating
Contact plating
silver
gold 2)
Part Number
Crimp termination 1)
2
–
T 3200 005
–
3)
4 3)
3
36
(1.417)
64
(2.520)
17
(DIA.670)
T 3260 005
T 3260 058
4)
T 3260 055
T 3300 005
T 3300 058 4)
T 3300 055
5
T 3360 005
T 3360 058
T 3360 055
5 S 3)
T 3356 005
T 3356 058 4)
T 3356 055
6
T 3400 005
T 3400 058
T 3400 055
7
7 3)
8
3)
T 3475 005
T 3475 058
4)
T 3475 055
T 3484 005
T 3484 058 4)
T 3484 055
3)
T 3504 005
T 3504 058
T 3504 055
12
T 3635 005
T 3635 058
T 3650 005
T 3650 058
14
1)
Please order crimp contacts separately, see page 43
2)
See remark page 6
Assembly instructions
male cable connector, cable diameter 4-6 mm
3)
4)
–
–
Contact order for DIN EN 60 130-9
4)
Available upon request.
Assembly instructions
male cable connector, cable diameter 4-6 mm or 6-8 mm
6)
6)
tightening torque 1Nm
tightening torque 0,3Nm
tightening torque 0,3Nm
5)
5)
20
20
5
2,5
2,5
5
2,5
2,5
20
tightening torque 0,4Nm
20
tightening torque 0,4Nm
Assembly instructions 6)
male cable connector, right-angled, can be keyed to 8 angle positions
tightening torque 0,4Nm
fold back
shielding
2,5
5)
8
Solder version only
6)
32
2,5
5
32
Assembly Instructions please refer to page 46, conneting instructions
Amphenol
C 091 A
Female cable connector,
screw locking,
straight
Description
Cable diameter 4-6 mm
Cable diameter 6-8 mm
Drawing
68
(2.667)
45
(1.772)
17
(DIA.670)
Female cable connector,
for cable diameter 4-6 mm,
termination: solder or crimp,
contact plating: silver or gold.
No. of
cont.
62
(2.441)
53,5
(2.106)
17
(DIA.670)
Female cable connector,
for cable diameter 6-8 mm,
termination: solder or crimp,
with clamping ring,
contact plating: silver or gold.
PG 9
62
(2.441)
53,5
(2.106)
17
(DIA.670)
Female cable connector,
for cable diameter 4-6 mm,
termination: solder or crimp,
contact plating: silver or gold.
PG 7
68
(2.667)
45
(1.772)
20
(DIA.788)
Female cable connector,
for cable diameter 4-6 mm,
solder termination,
plastic coated coupling ring,
contact plating: silver.
1)
Please order crimp contacts separately, see page 43
Amphenol
2)
See remark page 6
2
3 3)
4 3)
5
5 S 3)
6 3)
7
7 3)
8 3)
12
14
2
3 3)
4 3)
5
5 S 3)
6 3)
7
7 3)
8 3)
12
14
2
3 3)
4 3)
5
5 S 3)
6 3)
7
7 3)
8 3)
12
14
2
3 3)
4 3)
5
5 S 3)
6 3)
7
7 3)
8 3)
12
14
3)
Cable diameter 4-6 mm
Cable diameter 4-6 mm
Part Number solder termination
Contact plating
Contact plating
silver
gold 2)
T 3201 018
T 3201 001
T 3261 018
T 3261 001
T 3301 018
T 3301 001
T 3361 018
T 3361 001
T 3357 018 4)
T 3361 010
T 3401 001
T 3401 018
T 3476 001
T 3476 018
T 3485 001
T 3485 018
T 3505 001
T 3505 018
T 3636 001
T 3636 000
T 3651 001
T 3651 000
T 3201 002
T 3201 028
T 3261 002
T 3261 028
T 3301 002
T 3301 028
T 3361 002
T 3361 028
T 3361 020
T 3357 028 4)
T 3401 002
T 3401 028
T 3476 002
T 3476 028
T 3485 002
T 3485 028
T 3505 002
T 3505 028
–
T 3636 002
–
T 3651 002
–
–
T 3261 004
T 3261 048
T 3301 004
T 3301 048
T 3361 004
T 3361 048 4)
T 3357 004
T 3357 048 4)
T 3401 004
T 3401 048
T 3476 004
T 3476 048
T 3485 004
T 3485 048
T 3505 004
T 3505 048
–
T 3636 004
–
T 3651 004
T 3201 013
–
T 3261 013
–
T 3301 013
–
T 3361 013
–
T 3361 130
–
T 3401 013
–
T 3476 013
T 3476 038
T 3485 013
–
T 3505 013
–
–
–
–
–
Contact order for DIN EN 60 130-9
4)
Part Number
Crimp termination1)
–
T 3261 551
T 3301 551
T 3361 551
T 3357 551
T 3401 551
T 3476 551
T 3485 551
T 3505 551
–
–
–
T 3261 552 4)
T 3301 552 4)
T 3361 552
T 3357 552 4)
T 3401 552 4)
T 3476 552
T 3485 552 4)
T 3505 552
–
–
–
T 3261 554 4)
T 3301 554
T 3361 554 4)
T 3357 554
T 3401 554 4)
T 3476 554 4)
T 3485 554 4)
T 3505 554
–
–
–
–
–
–
–
–
–
–
–
–
–
Available upon request.
9
C 091 A
Female cable connector,
screw locking,
right-angled
Description
Drawing
Female cable connector,
right-angled,
for cable diameter 4-6 mm,
termination: solder or crimp,
contact plating: silver or gold.
32
(1.260)
64
(2.520)
No. of
cont.
Part Number solder termination
Contact plating
Contact plating
silver
gold 2)
Part Number
Crimp termination 1)
2
T 3201 005
–
–
3 3)
T 3261 005
T 3261 058 4)
T 3261 055
4
T 3301 005
T 3301 058
4)
T 3301 055
5
T 3361 005
T 3361 058
4)
T 3361 055
5 S 3)
T 3357 005
T 3357 058
T 3357 055
6
T 3401 005
T 3401 058
T 3401 055
T 3476 005
T 3476 058 4)
T 3476 055
3)
T 3485 005
T 3485 058
4)
T 3485 055
8 3)
T 3505 005
T 3505 058 4)
T 3505 055
12
T 3636 005
T 3636 058
–
14
T 3651 005
T 3651 058 4)
–
1)
Please order crimp contacts separately, see page 43
2)
3)
7
7
17
(DIA.670)
3)
See remark page 6
Assembly instructions 6)
female cable connector, cable diameter 4-6 mm
3)
Contact order for DIN EN 60 130-9
4)
Available upon request.
Assembly instructions 6)
female cable connector, cable diameter 4-6 mm or 6-8 mm
tightening torque 0,3Nm
tightening torque 1Nm
tightening torque 0,3Nm
20
2,5
2,5
20
fold back shielding
5
fold back shielding
5
2,5
2,5
20
tightening torque 0,4Nm
20
tightening torque 0,4Nm
Assembly instructions 6)
female cable connector, right-angled, can be keyed to 8 angle positions
tightening torque 0,4Nm
fold back
shielding
32
2,5
5)
10
Solder version only
6)
32
2,5
5
5)
Assembly instructions please refer to page 46, conneting instructions
Amphenol
C 091 A
18 +0,1
(.709)
19,1+0,1
(.752)
max.5mm
max. 5 mm Tightening
torque 0,7 Nm
Female receptacle,
screw locking,
front mounting
Panel cutout
Drawing
No. of
cont.
13
(.512)
11,5
(.453)
M18x0,75
Female receptacle,
termination: solder or crimp,
panel mounting with ring or hex nut,
contact plating: silver or gold.
1
(.040)
20
(DIA .788)
Description
2,8 +0,1
(.110)
16
(.630)
*Measure 12- and 14-pol.=14 ± 0,3
1
(.040)
M18x0,75
20
(DIA .788)
13
(.512)
11,5
(.453)
Female receptacle,
termination: straight dip solder,
pin length 15 mm from flange,
panel mounting with ring nut,
contact plating: silver or gold,
solder area: tin plated.
15
(.600)
1
(.040)
20
(DIA .788)
4
(.157)
13
(.512)
11,5
(.453)
M18x0,75
Female receptacle,
termination: straight dip solder,
pin length 19 mm from flange,
panel mounting with ring nut,
contact plating: silver,
solder area: tin plated.
19
(.748)
1
(.040)
20
(DIA .788)
4
(.157)
13
(.512)
11,5
(.453)
M18x0,75
Female receptacle,
termination: straight dip solder,
pin length 24 mm from flange,
panel mounting with ring nut,
contact plating: silver,
solder area: tin plated.
24
(.945)
1)
Please order crimp contacts separately, see page 43
Amphenol
2)
See remark page 6
2
3 3)
4 3)
5
5 S 3)
6 3)
7
7 3)
8 3)
12
14
2
3 3)
4 3)
5
5 S 3)
6 3)
7
7 3)
8 3)
12
14
2
3 3)
4 3)
5
5 S 3)
6 3)
7
7 3)
8 3)
12
14
2
3 3)
4 3)
5
5 S 3)
6 3)
7
7 3)
8 3)
12
14
3)
Part Number solder termination
Contact plating silver
ring nut
hex nut
T 3203 000
T 3263 000
T 3303 000
T 3363 000
T 3363 010
T 3403 000
T 3478 000
T 3487 000
T 3507 000
T 3638 000
T 3653 000
–
T 3263 300
T 3303 300
T 3363 300
T 3359 300
T 3403 300
T 3478 300
T 3487 300
T 3507 300
–
–
–
T 3263 320
T 3303 320
T 3363 320
T 3359 320
T 3403 320
T 3478 320
T 3487 320
T 3507 320
–
–
–
T 3263 330
T 3303 330
T 3363 330
T 3359 330
T 3403 330
T 3478 330
T 3487 330
T 3507 330
–
–
T 3203 009
T 3263 009
T 3303 009
T 3363 009
T 3359 009
T 3403 009
T 3478 009
T 3487 009
T 3507 009
T 3638 009
T 3653 009
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Contact order for DIN EN 60 130-9
Contact plating
gold 2) ring nut
T 3203 018
T 3263 018
T 3303 018
T 3363 018
T 3359 018
T 3403 018
T 3478 018
T 3487 018 4)
T 3507 018
T 3638 004
T 3653 004
–
–
–
–
–
–
–
–
–
T 3638 304
T 3653 304
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
4)
Part No. Crimp
termination 1)
ring nut
–
T 3263 550
T 3303 550
T 3363 550
T 3359 550
T 3403 550
T 3478 550
T 3487 550
T 3507 550
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Available upon request.
11
C 091 A
18 +0,1
(.709)
max. 3,5 mm
max.3,5mm
19,1+0,1
(.752)
Tightening
torque 0,7 Nm
Female receptacle,
screw locking,
rear mounting
Description
2,8 +0,1
(.110)
Panel cutout
Drawing
No. of
cont.
12
(.472)
Female receptacle,
termination: solder or crimp,
panel mounting with ring or hex nut,
contact plating: silver or gold.
M18x0,75
20
(DIA .788)
1
(.040)
5,5
(.217)
12,5
(.484)
*Measure 12- and 14-pol.=10 ± 0,3
10,5
(.413)
1
(.040)
M18x0,75
20
(DIA .788)
Female receptacle,
termination: straight dip solder,
pin length 10.5 mm from flange,
panel mounting with ring nut,
contact plating: silver or gold,
solder area: tin plated.
5,5
(.217)
12,5
(.484)
14,5
(.570)
4
(.157)
1
(.040)
M18x0,75
20
(DIA .788)
Female receptacle,
termination: straight dip solder,
pin length 14.5 mm from flange,
panel mounting with ring nut,
contact plating: silver,
solder area: tin plated.
12,5
(.484)
19,5
(.767)
4
(.157)
1
(.040)
M18x0,75
20
(DIA .788)
Female receptacle,
termination: straight dip solder,
pin length 19.5 mm from flange,
panel mounting with ring nut,
contact plating: silver,
solder area: tin plated.
12,5
(.484)
1)
12
5,5
(.217)
Please order crimp contacts separately, see page 43
2)
5,5
(.217)
See remark page 6
2
3 3)
4 3)
5
5 S 3)
6 3)
7
7 3)
8 3)
12
14
2
3 3)
4 3)
5
5 S 3)
6 3)
7
7 3)
8 3)
12
14
2
3 3)
4 3)
5
5 S 3)
6 3)
7
7 3)
8 3)
12
14
2
3 3)
4 3)
5
5 S 3)
6 3)
7
7 3)
8 3)
12
14
3)
Part Number solder termination
Contact plating silver
ring nut
hex nut
T 3203 100
T 3263 100
T 3303 100
T 3363 100
T 3359 100
T 3403 100
T 3478 100
T 3487 100
T 3507 100
T 3638 100
T 3653 100
T 3203 400
T 3263 400
T 3303 400
T 3363 400
T 3359 400
T 3403 400
T 3478 400
T 3487 400
T 3507 400
–
–
–
T 3263 420
T 3303 420
T 3363 420
T 3359 420
T 3403 420
T 3478 420
T 3487 420
T 3507 420
–
–
–
T 3263 430
T 3303 430
T 3363 430
T 3359 430
T 3403 430
T 3478 430
T 3487 430
T 3507 430
–
–
T 3203 109
T 3263 109 4)
T 3303 109 4)
T 3363 109
T 3359 109
T 3403 109
T 3478 109 4)
T 3487 109 4)
T 3507 109
T 3638 109 4)
T 3653 109 4)
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Contact order for DIN EN 60 130-9
Contact plating
gold 2) ring nut
–
T 3263 118 4)
T 3303 118
T 3363 118 4)
T 3359 118 4)
T 3403 118 4)
T 3478 118
T 3487 118
T 3507 118
T 3638 118
T 3653 118
–
–
–
T 3363 404
–
–
T 3478 404
–
T 3507 404
T 3638 404
T 3653 404
–
–
–
–
–
–
–
–
–
–
–
–
T 3263 434
T 3303 434
T 3363 434
–
T 3403 434
T 3478 434
–
–
–
4)
Part No. Crimp
termination 1)
ring nut
–
T 3263 150 4)
T 3303 150
T 3363 150
T 3359 150
T 3403 150
T 3478 150
T 3487 150 4)
T 3507 150
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Available upon request.
Amphenol
18 +0,1
(.709)
19,1+0,1
(.752)
C 091 A
Female receptacle,
screw locking,
right-angled
Panel cutout
Drawing
No. of
cont.
2
3 3)
4 3)
5
5 S 3)
6 3)
7
7 3)
8 3)
12
14
Female receptacle,
right-angled,
PCB mounting,
contact plating: gold,
solder area: tin plated.
*A Best.-Nr.
3 ...218
8,3 ...228
5 Pol.
12,5
(.484)
5
(.197)
4 ±0,05
(.157)
1
(.040)
(2x) 3 ±0,05
(.118)
13,5 ±0,1
(.532)
4 3 2
5 6 1
27 ±0,1
(1.063)
3,175 ±0,05
(.125)
4 ±0,05
(.157)
3,175 ±0,05
(.125)
–
–
–
–
–
–
–
–
–
–
–
g
6 Pol.
0,8 +0,1 (5x)
(.032)
0,8 +0,1 (6x)
(.032)
Please order crimp contacts separately, see page 43
1
4
2
5
3 ±0,05
(.118)
3 ±0,05
(.118)
1)
(6x) 1,2 +0,1
(DIA.047)
–
–
–
T 3363 902
–
T 3403 902
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
5 Pol.
2 3
Amphenol
2
3 3)
4 3)
5
5 S 3)
6 3)
7
7 3)
8 3)
12
14
M18x0,75
20
(DIA .788)
16
(.630)
13
(.512)
(2x) 3,2 +0,1
(DIA.126)
8,5 ±0,2
(.335)
(5x) 1,2 +0,1
(DIA.047)
5,5
(.217)
1,5
(.060)
2
27 ±0,1
(1.063)
18,5
(DIA.728)
8,5 ±0,2
(.335)
1,6 ±0,2
(.063)
Female receptacle,
right-angled,
rear mounting,
panel mounting with ring nut,
contact plating: gold,
solder area: tin plated.
–
–
–
–
–
–
–
–
–
–
–
6 Pol.
(2x) 3,2 +0,1
(DIA.126)
(2x) 3 ±0,05
(.118)
13,5 ±0,1
(.532)
12,8
(.504)
12,5
(.492)
21,5
(.846)
Part Number
Crimp termination 1)
PCB-layout
components side
4
3)
PCB-layout
components side
Part Number solder termination
Contact plating
Contact plating
silver
gold 2)
–
–
–
–
–
–
–
T 3363 ... 3)
–
–
T 3403 ... 3)
–
–
–
–
–
–
–
–
–
–
–
5 3 1
Description
2,8 +0,1
(.110)
3 ±0,05 (2x)
(.118)
2)
see remark page 6
3)
1
Contact order for DIN EN 60 130-9
3
6
4
5
3 ±0,05 (2x)
(.118)
13
18 +0,1
(.709)
19,1+0,1
(.752)
C 091 A
Female receptacle,
screw locking,
right-angled
2,8 +0,1
(.110)
Panel cutout
No. of
cont.
Female receptacle,
right-angled,
PCB mounting,
contact plating: silver.
23,7
(.933)
5,7
(.224)
6,8
(.267)
15,1
(.595)
PCB layout
components side
1
5
3
4
1
2
10,1
(.398)
10,1
(.398)
2
2,4
(.094)
3
1,3
(.051)
5
(.197)
2,4
(.094)
1,3
(.051)
15
(.591)
15
(.591)
7 Pol.
7 Pol.
6
7 5
1
2
Please order crimp contacts separately, see page 43
14
2)
3
8
4 6
2
1
2,4
(.094)
5
(.197)
15
(.591)
5
(.197)
15
(.591)
1)
8 Pol.
8 Pol.
10
(.393)
10,1
(.398)
3
4
2,5
(.098)
7 5
1,3
(.051)
2,5
(.098)
5
(.197)
10
(.393)
10,1
(.398)
2,4
(.094)
1,3
(.051)
–
–
–
–
–
–
–
–
–
–
–
5 Pol. Stere
5 Pol. Stereo
10
(.393)
3 POL
Part Number
Crimp termination 1)
2,5
(.098)
5
(.197)
13,5
(.532)
3,5
(.137)
M18x0,75
1
(.040)
2
3 3)
4 3)
5
5 S 3)
6 3)
7
7 3)
8 3)
12
14
Part Number solder termination
Contact plating
Contact plating
silver
gold 2)
–
–
T 3263 900
–
–
–
–
–
T 3359 900
–
–
–
–
–
T 3487 900
–
T 3507 900
–
–
–
–
–
2,5
(.098)
5
(.197)
Drawing
20
(DIA .788)
Description
see remark page 6
3)
Contact order for DIN EN 60 130-9
Amphenol
C 091 A
18 +0,1
(.709)
19,1+0,1
(.752)
max.3,5mm
max.
3,5 mm Tightening
torque 0,7 Nm
Male receptacle,
screw locking,
front mounting
Description
2,8 +0,1
(.110)
Panel cutout
Drawing
No. of
cont.
Male receptacle,
termination: solder or crimp,
panel mounting with ring or hex nut,
contact plating: silver or gold.
8,5
(.335)
20
(DIA .788)
M18x0,75
1
(.040)
6,5
(.256)
16
(.630)
10,5
(.413)
1
(.040)
20
(DIA .788)
M18x0,75
Male receptacle,
termination: straight dip solder,
pin length 10.5 mm from flange,
panel mounting with ring nut,
contact plating: silver or gold.
Part Number solder termination
Contact plating silver
ring nut
hex nut
1)
Please order crimp contacts separately, see page 43
Amphenol
2)
see remark page 6
ring nut
T 3202 000
T 3202 009
T 3202 018
–
3 3)
T 3262 000
T 3262 009
T 3262 018
T 3262 550
4
T 3302 000
T 3302 009
T 3302 018
T 3302 550
5
T 3362 000
T 3362 009
T 3362 018
T 3362 550
5 S 3)
T 3362 010
T 3358 009
T 3358 018
T 3358 550 4)
6 3)
T 3402 000
T 3402 009
T 3402 018
T 3402 550
7
T 3477 000
T 3477 009
T 3477 018
T 3477 550
7
3)
T 3486 000
T 3486 009
T 3486 018
T 3486 550 4)
8
3)
T 3506 000
T 3506 009
T 3506 018
T 3506 550 4)
12
T 3637 001
T 3637 009
T 3637 000
–
14
T 3652 001
T 3652 009
T 3652 000
–
2
–
–
–
–
3 3)
T 3262 300
–
–
–
4
T 3302 300
4)
–
–
–
5
T 3362 300
4)
–
–
–
5 S 3)
T 3358 300 4)
–
–
–
6
T 3402 300
4)
–
–
–
T 3477 300 4)
–
–
–
3)
T 3486 300
–
–
–
8 3)
T 3506 300
–
–
12
–
14
–
7
16
(.630)
Part No. Crimp
termination 1)
2
3)
3)
3)
7
3,5
(.137)
6,5
(.256)
Contact plating
gold 2) ring nut
3)
4)
–
–
T 3637 304
4)
–
–
T 3652 304 4)
–
Contact order for DIN EN 60 130-9
4)
Available upon request.
15
C 091 A
18 +0,1
(.709)
max. 3,5 mm
max.3,5mm
19,1+0,1
(.752)
Tightening
torque 0,7 Nm
Male receptacle,
screw locking,
rear mounting
Panel cutout
Drawing
4,5
(.177)
1
(.040)
20
(DIA .788)
Male receptacle,
termination: solder or crimp,
panel mounting with ring nut,
contact plating: silver or gold.
No. of
cont.
Part Number solder termination
13,5
(.532)
16
(.630)
Male receptacle,
termination: straight dip solder,
pin length 10,5 mm from flange,
panel mounting with ring nut,
contact plating: silver or gold.
Contact plating
gold 2) ring nut
2
T 3202 100
–
–
–
3 3)
T 3262 100
–
–
T 3262 150 4)
4 3)
T 3302 100
–
–
T 3302 150 4)
T 3362 100
–
–
T 3362 150
T 3358 100
–
–
T 3358 150 4)
6 3)
T 3402 100
–
–
T 3402 150 4)
7
T 3477 100
–
–
T 3477 150 4)
7 3)
T 3486 100
–
–
T 3486 150 4)
8
T 3506 100
–
–
T 3506 150 4)
12
–
–
T 3637 100
–
14
–
–
T 3652 100
–
3
3)
T 3262 400
–
–
–
4 3)
T 3302 400
–
–
–
5
T 3362 400
–
–
–
5 S 3)
T 3358 400
–
–
–
6
T 3402 400
–
–
–
T 3477 400
–
–
–
3)
T 3486 400
–
–
–
8 3)
T 3506 400
–
–
–
12
–
–
T 3637 404
14
–
–
T 3652 404
3 3)
T 3262 420 4)
–
–
–
4
T 3302 420
4)
–
–
–
T 3362 420 4)
–
–
–
T 3358 420
–
–
–
–
–
–
5S
3)
3)
3)
7
7
Male receptacle,
termination: straight dip solder,
pin length 14,5 mm from flange,
panel mounting with ring nut,
contact plating: silver or gold.
3)
5
5S
Male receptacle,
termination: straight dip solder,
pin length 19,5 mm from flange,
panel mounting with ring nut,
contact plating: silver or gold.
3)
16
see remark page 6
–
7
T 3477 420
–
–
–
7 3)
T 3486 420
–
–
–
8
3)
T 3506 420
–
–
–
3 3)
T 3262 430
–
–
–
4
T 3302 430
4)
–
–
–
5
T 3362 430
4)
–
–
–
5 S 3)
T 3358 430 4)
–
–
–
6
T 3402 430
–
–
–
T 3477 430
–
–
–
4)
–
–
–
T 3506 430 4)
–
–
3)
3)
T 3486 430
3)
8 3)
Please order crimp contacts separately, see page 43
–
4)
T 3402 420
7
2)
4)
ring nut
6 3)
7
1)
Part No. Crimp
termination 1)
Contact plating silver
ring nut
hex nut
5
M18x0,75
Description
2,8 +0,1
(.110)
3)
4)
Contact order for DIN EN 60 130-9
–
4)
Available upon request.
Amphenol
C 091 A
PCB-Layout
PCB-layout
Female Receptacles
These hole patterns on PCB are valid for female receptacles
with straight dip solder pins.
Components side of circuit board
4 POL*
4,26
1
4
1,1
1,1
3
3,5
2
1
3
2
4
1
6,47
5 POL S*
6,06
5 POL
4,95
1
1,1
4
1
2
4
5
1
3
5
7,0
7 POL
7,0
7,0
6 POL*
6
1,1
2
4
6
1
1
2
6
E
F
G
3,5
8,0
D
5,0
L
B
C
F
M
K
A
N O
L
B
9,0
6,0
3,0
9,0
E
D
C
0,8
0,8
3,0
3,5
1,1
1,1
3,5
O
N
M
30
3,5
JH
A
E
30
K
L
D
F
G
H
J
M
37
A
9,0
3,0
G
H
J
K
37
F
G
B
8,0
5,0
M
8,0
3,5
JH
5,0
30
K
37
30
37
D
E
14 14
POLPol.
9,0
3,0
C
7
7,0
0,8
C
L
Pol.
1212
POL
4,5
5
3
8
6
7
7,0
6,0
0,8
B
3
6
4 2
1
8,0
14
14 POL
Pol.
6,0
A
1
5
4,95
6
4 2
7,0
7,0
4,95
3,5
1
8
7
6
12 POL
4
0,7
1
3
4,95
5 2
8 POL*
4,95
3,5
1,1
4
4,95
3,5
1,1
4,95
5 2
7
7 POL*
4,95
3
1
3,5
8 POL*
4,95
7
5
3,5
7 POL*
3
5
6,06
7
1
4
3
3,5
5
6,06
3,5
6
5
4
2
3,5
2
7,0
1,1
3
3
4
7 POL
6,06
1,1
1,1
6,06
3,5
6 POL*
3,5
3
2
3,5
1
3,5
4
3
2,48
1,1
3,5
5
2,48
5
2
3,5
2
4,95
1,1
1,1
3
4
5 POL S*
6,06
3,5
5 POL
6,47
0,7
1
2
2
3
1,34
3,5
3
2,78
7,0
1,1
1,1
3 POL*
4,26
2,78
4 POL*
7,0
5,0
3 POL*
1,34
Male Receptacles
These hole patterns on PCB are valid for male receptacles
with straight dip solder pins.
Components side of circuit board
4,5
6,0
* Contact order for DIN EN 130-9
Amphenol
17
18
Amphenol
C 091 B
Main Features
• Plastic locking ring; bayonet locking
• Number of contacts: 3 – 8, 12 and 14 contacts
• Internal strain relief
• Good shielding effectiveness when mated and locked
• Male and female cable connectors
- Straight or right angled
- Solder connection: 3 – 8, 12 and 14 contacts
- Crimp connection: 3 – 8 contacts
- With cable sleeve for max. cable diameter 6 mm, or
- With cable glands for cable diameter 4 – 6 mm or 6 – 8 mm
• Male and female receptacles
- Panel mount types for front or rear panel mounting
- Pcb mount types
- Solder connection: 3 – 8, 12 and 14 contacts
- Crimp connection: 3 – 8 contacts
• Coloured back shells optional
• UL registered under file number E 63 093 UL
1)
UNDERWRITERS LABORATORIES INC.
1)
In general approvals refer to representative versions of the connector series.
Test report upon request.
Amphenol
19
C 091 B
Characteristics
General Characteristics
Standard
Characteristics
Number of contacts
3
4
5 Stereo
6
41 524 45 322
60130-9 60130-9
7
1
3
4
2
1
IEC 60664-1
Rated voltage
UL 1977
Rated impulse withstand voltage
IEC 60664-1
Pollution degree
IEC 60664-1
1
Installation category
IEC 60664-1
I
Insulation group
IEC 60664-1
II, 400 ≤ CTI < 600
Current rating
IEC 60512-5-2
Test 5 b
UL 1977
IEC 60512-3-1
Test 3 a
Insulation resistance
Contact resistance
100 V –~
5
4
3
1
7
5
2
6
8
3
7
45 329 45 326
60130-9 60130-9
–
–
Electrical Characteristics
Rated voltage
300 V –~
2
6
300 V –~
–
–
–
–
150 V –~
250 V
1500 V
A
6
5
B
1
DC
5
4
2
K
H J
5
3
L
O N
M
2
G
1
A
–
–
4
B
41 524
–
60130-9 60130-9
5
14
E
F
3
4
1
12
L
4
8
DC
1
7
M
K
H J
Contact arrangement acc. to DIN
Contact arrangement acc. to IEC
3
7
4
G
3
2
1
6
E
F
2 3
2
View on termination side
of contact insert
5
60 V
1200 V
1500 V
1200 V
3 A / + 40 °C /
+ 104 °F
5 A / + 40 °C / + 104 °F
please refer also to current derating curves page 45
> 10 10 Ω
<5mΩ
IEC 60512-2-1
Test 2 a
Climatic Characteristics
Climatic category
IEC 60668-1
40 / 100 / 56
Temperature range
IEC 60668-1
- 40 °C ... + 100 °C / - 40 °F ... + 212 °F
IP-degree
IEC 60529
IP 40
Insertion and withdrawal forces
IEC 60512-13-2
Test 13 b
Mechanical operation
IEC 60512
Test 9 a
Mechanical Characteristics
25 N
90.oz
30 N
110.oz
35 N
125.oz
50 N
180.oz
55 N
200.oz
60 N
220.oz
50 N
180.oz
Silver ≥ 500 mating cycles
Gold ≥ 1000 mating cycles
Materials
Housing material
die cast, nickel plated
Dielectric material
thermoplastic
Contact plating
silver plated / gold plated *
Further Characteristics
Termination technique
Wire gauge
solder, crimp
solder
solder: ≤ 0,5 mm / 20 AWG
crimp: 2 - 6 pol (excluding 5S): 0,09 - 1,00 mm2 / 28 - 18 AWG
crimp: 5S, 7, 7S and 8-pol.: 0,09 - 0,75 mm2 / 28 - 20 AWG
≤ 0,25 mm 2/ 24 AWG
2
Flammability
UL 94 V0
Locking system
bayonet
Caution: Do not connect or disconnect under load. Metal housing parts shall be securely incorporated to protected ground.
* Remark for gold plated contacts: In order to avoid brittle inter-metallic connections, gold-plated terminals have to be tin-plated in the solder area.
IEC 60 664 ^
= DIN VDE 0110 ; IEC 60 512-x ^
= DIN EN 60 512-x
20
Amphenol
C 091 B
Male cable connector,
bayonet locking inside
Description
Cable diameter 4-6 mm
Cable diameter 6-8 mm
Drawing
67,5
(2.658)
44,5
(1.752)
62
(2.441)
53
(2.087)
PG 9
Male cable connector,
for cable diameter 4-6 mm,
termination: solder or crimp,
contact plating: silver or gold.
Part Number solder termination
Contact plating
Contact plating
silver
gold 2)
Part Number
Crimp termination 1)
3 3)
T 3274 501
T 3274 518
T 3274 551
4 3)
T 3324 501
T 3324 518
T 3324 551
T 3374 501
T 3374 518
T 3374 551
T 3394 551
T 3394 501
T 3394 518
6 3)
T 3424 501
T 3424 518
7
T 3434 501
T 3434 518
7 3)
T 3444 501
T 3444 518 4)
T 3444 551 4)
8 3)
T 3524 501
T 3524 518 4)
T 3524 551
12
T 3624 501
T 3624 518 4)
–
14
T 3644 501
T 3644 518
–
3 3)
T 3274 502
T 3274 528 4)
T 3274 552
4
T 3324 502
T 3324 528
4)
T 3324 552
T 3374 502
T 3374 528 4)
T 3374 552
T 3394 502
T 3394 528
T 3394 552 4)
6 3)
T 3424 502
T 3424 528 4)
T 3424 552
7
T 3434 502
T 3434 528 4)
T 3434 552
T 3444 528
T 3444 552 4)
5S
3)
3)
5
5S
20
(DIA.788)
Male cable connector,
for cable diameter 6-8 mm,
termination: solder or crimp
with clamping ring,
contact plating: silver or gold.
62
(2.441)
53
(2.087)
3)
20
(DIA.788)
64,5
(2.539)
T 3444 502
8
T 3524 502
T 3524 528
T 3524 552 4)
12
T 3624 502
T 3624 528 4)
–
14
T 3644 502
T 3644 528 4)
–
3
3)
T 3274 504
4)
T 3274 548
4)
T 3274 554 4)
4
3)
T 3324 504
4)
T 3324 548
4)
T 3324 554 4)
T 3374 548 4)
T 3374 554 4)
Please order crimp contacts separately, see page 43
Amphenol
2)
see remark page 20
4)
T 3374 504
4)
5 S 3)
T 3394 504 4)
T 3394 548 4)
T 3394 554 4)
6
T 3424 504
T 3424 548
4)
T 3424 554 4)
T 3434 504 4)
T 3434 548 4)
T 3434 554 4)
T 3444 504
4)
T 3444 548
T 3444 554 4)
8 3)
T 3524 504 4)
T 3524 548
12
T 3624 504
4)
14
T 3644 504
4)
3 3)
T 3274 005
T 3274 058
T 3274 055 4)
4 3)
T 3324 005
T 3324 058
T 3324 055 4
T 3374 005
T 3374 058
T 3394 005
T 3394 058
6 3)
T 3424 005
T 3424 058 4)
T 3424 055
7
T 3434 005
T 3434 058
4)
T 3434 055 4)
T 3444 005 4)
T 3444 058 4)
T 3444 055 4)
T 3524 058
T 3524 055 4)
3)
7
3)
5S
3)
7 3)
1)
4)
3)
5
20
(DIA.788)
T 3434 551
7
5
36
(1.417)
Male cable connector,
right-angled,
for cable diameter 4-6 mm,
termination: solder or crimp,
contact plating: silver or gold,
cable sleeve: black.
T 3424 551
4)
3)
7
PG 7
Right-angled
No. of
cont.
5
20
(DIA.788)
Male cable connector,
for cable diameter 4-6 mm,
termination: solder or crimp,
contact plating: silver or gold,
cable sleeve: black.
Cable diameter 4-6 mm
8
3)
4)
4)
T 3524 554 4)
T 3624 548
4)
–
T 3644 548
4)
–
T 3374 055
4)
12
T 3624 005
T 3624 058 4)
14
T 3644 005
T 3644 058 4)
3)
Contact order for DIN EN 60 130-9
T 3394 055 4)
4)
–
–
4)
Available upon request.
21
C 091 B
Male cable connector,
bayonet locking inside,
assembly instructions
Male cable connector, cable diameter 4-6 mm 6)
tightening torque 0,3Nm
5)
20
fold back
shielding
5
2,5
2,5
20
tightening torque 0,4Nm
Male cable connector, cable diameter 4-6 mm or 6-8 mm
6)
tightening torque 1Nm
tightening torque 0,3Nm
5)
20
5
2,5
2,5
fold back
shielding
20
tightening torque 0,4Nm
Male cable connector, right-angled, can be keyed in 8 angle positions 6)
tightening torque 0,4Nm
fold back
shielding
32
2,5
5)
Solder version only
22
6)
32
2,5
5
5)
Assembly instructions please refer to page 46, conneting instructions
Amphenol
C 091 B
Male cable connector,
bayonet locking outside
Description
Cable diameter 4-6 mm
Cable diameter 6-8 mm
Drawing
Male cable connector,
for cable diameter 4-6 mm,
termination: solder or crimp,
contact plating: silver or gold,
cable sleeve: black.
67,5
(2.658)
44,5
(1.752)
No. of
cont.
Part Number solder termination
Contact plating
Contact plating
silver
gold 2)
Part Number
Crimp termination 1)
3 3)
T 3279 501
T 3279 518 4)
T 3279 551
4 3)
T 3329 501
T 3329 518 4)
T 3329 551
5
T 3379 501
T 3379 518
4)
T 3379 551
T 3399 501
T 3399 518
4)
T 3399 551 4)
T 3429 501
T 3429 518
4)
T 3429 551
7
T 3439 501
T 3439 518
4)
T 3439 551
7 3)
T 3449 501 4)
T 3449 518 4)
T 3449 551 4)
8 3)
T 3529 501 4)
T 3529 518 4)
T 3529 551 4)
12
T 3629 501
T 3629 518
4)
–
14
T 3649 501
T 3649 518
4)
–
3 3)
T 3279 502
T 3279 528 4)
T 3279 552
4
T 3329 502
T 3329 528
4)
T 3329 552
T 3379 502
T 3379 528 4)
T 3379 552
T 3399 502
T 3399 528
T 3399 552 4)
6 3)
T 3429 502
T 3429 528 4)
T 3429 552
7
T 3439 502
T 3439 528 4)
T 3439 552
T 3449 528
4)
T 3449 552 4)
4)
T 3529 552 4)
5S
20
(DIA.788)
6
62
(2.441)
53
(2.087)
PG 9
Male cable connector,
for cable diameter 4-6 mm,
termination: solder or crimp,
contact plating: silver or gold.
3)
3)
3)
5
5S
20
(DIA.788)
Male cable connector,
for cable diameter 6-8 mm,
termination: solder or crimp
with clamping ring,
contact plating: silver or gold.
62
(2.441)
53
(2.087)
3)
1)
Please order crimp contacts separately, see page 43
Amphenol
see remark page 20
4)
7
T 3449 502
8
3)
T 3529 502
T 3529 528
12
T 3629 502 4)
T 3629 528 4)
–
14
T 3649 502
T 3649 528 4)
–
3
3)
T 3279 504
T 3279 548
4)
T 3279 554 4)
4
3)
T 3329 504
T 3329 548
4)
T 3329 554 4)
T 3379 504 4)
T 3379 548 4)
T 3379 554 4)
5 S 3)
T 3399 504 4)
T 3399 548 4)
T 3399 554 4)
6
T 3429 504
T 3429 548
4)
T 3429 554 4)
T 3439 504 4)
T 3439 548 4)
T 3439 554 4)
T 3449 504
T 3449 548
4)
T 3449 554 4)
5
20
(DIA.788)
2)
4)
3)
3)
7
PG 7
Cable diameter 4-6 mm
7
3)
4)
4)
4)
4)
8 3)
T 3529 504 4)
T 3529 548 4)
T 3529 554 4)
12
T 3629 504
4)
T 3629 548
4)
–
14
T 3649 504
4)
T 3649 548
4)
3)
Contact order for DIN EN 60 130-9
–
4)
Available upon request.
23
C 091 B
Male cable connector,
bayonet locking outside,
assembly instructions
Male cable connector, cable diameter 4-6 mm 6)
tightening torque 0,3Nm
5)
20
5
2,5
2,5
fold back
shielding
20
tightening torque 0,4Nm
Male cable connector, cable diameter 4-6 mm or 6-8 mm 6)
tightening torque 1Nm
tightening torque 0,3Nm
5)
20
5
2,5
2,5
fold back
shielding
20
tightening torque 0,4Nm
5)
Solder version only
24
6)
Assembly instructions please refer to page 46, conneting instructions
Amphenol
C 091 B
Female cable connector,
bayonet locking inside
Description
Cable diameter 4-6 mm
Cable diameter 6-8 mm
Drawing
Female cable connector,
for cable diameter 4-6 mm,
termination: solder or crimp,
contact plating: silver or gold,
cable sleeve: black.
68
(2.667)
45
(1.772)
Part Number solder termination
Contact plating
Contact plating
silver
gold 2)
Part Number
Crimp termination 1)
3 3)
T 3275 501
T 3275 518 4)
T 3275 551
4 3)
T 3325 501
T 3325 518 4)
T 3325 551
5
T 3375 501
T 3375 518
4)
T 3375 551
T 3395 518
4)
T 3395 551 4)
T 3425 501
T 3425 518
4)
T 3425 551
7
T 3435 501
T 3435 518
4)
T 3435 551
7 3)
T 3445 501 4)
T 3445 518 4)
T 3445 551 4)
8 3)
T 3525 501 4)
T 3525 518 4)
T 3525 551 4)
12
T 3625 501
4)
T 3625 518
4)
–
14
T 3645 501
4)
T 3645 518
4)
–
3 3)
T 3275 502
T 3275 528 4)
T 3275 552
4
T 3325 502
T 3325 528
4)
T 3325 552
T 3375 502
T 3375 528 4)
T 3375 552
T 3395 528
T 3395 552 4)
5S
20
(DIA.788)
62
(2.441)
53,5
(2.106)
Female cable connector,
for cable diameter 4-6 mm,
termination: solder or crimp,
contact plating: silver or gold.
T 3395 501
3)
3)
3)
5
5S
20
(DIA.788)
PG 9
62
(2.441)
53,5
(2.106)
T 3395 502
3)
20
(DIA.788)
64,5
(2.539)
20
(DIA.788)
1)
Please order crimp contacts separately, see page 43
Amphenol
2)
4)
4)
T 3425 502
T 3425 528 4)
T 3425 552
7
T 3435 502
T 3435 528 4)
T 3435 552
T 3445 528
4)
T 3445 552 4)
T 3525 528
4)
T 3525 552 4)
7
3)
T 3445 502
4)
8
3)
T 3525 502
4)
12
T 3625 502 4)
T 3625 528 4)
–
14
T 3645 502
T 3645 528 4)
–
3
3)
T 3275 504
4)
T 3275 548
4)
T 3275 554 4)
4
3)
T 3325 504
4)
T 3325 548
4)
T 3325 554 4)
T 3375 504 4)
T 3375 548 4)
T 3375 554 4)
5 S 3)
T 3395 504 4)
T 3395 548 4)
T 3395 554 4)
6
T 3425 504
T 3425 548
4)
T 3425 554 4)
T 3435 504 4)
T 3435 548 4)
T 3435 554 4)
T 3445 504
T 3445 548
4)
T 3445 554 4)
5
32,5
(1.279)
Female cable connector,
right-angled,
for cable diameter 4-6 mm,
termination: solder or crimp,
contact plating: silver or gold,
cable sleeve: black.
4)
6 3)
3)
7
PG 7
Right-angled
No. of
cont.
6
Female cable connector,
for cable diameter 6-8 mm,
termination: solder or crimp
with clamping ring,
contact plating: silver or gold.
Cable diameter 4-6 mm
7
3)
4)
4)
8 3)
T 3525 504 4)
T 3525 548 4)
T 3525 554 4)
12
T 3625 504
4)
T 3625 548
4)
–
14
T 3645 504
4)
T 3645 548
4)
–
3 3)
T 3275 005
T 3275 058 4)
T 3275 055 4)
4 3)
T 3325 005
T 3325 058 4)
T 3325 055 4)
5
T 3375 005
T 3375 058
4)
T 3375 055 4)
5 S 3)
T 3395 005
T 3395 058 4)
T 3395 055 4)
6 3)
T 3425 005
T 3425 058 4)
T 3425 055 4)
7
T 3435 005
T 3435 058
4)
T 3435 055 4)
T 3445 005 4)
T 3445 058 4)
T 3445 055 4)
T 3525 058
4)
T 3525 055
4)
–
7 3)
8
3)
12
T 3625 005
T 3625 058
14
T 3645 005
T 3645 058 4)
see remark page 20
3)
Contact order for DIN EN 60 130-9
–
4)
Available upon request.
25
C 091 B
Female cable connector,
bayonet locking inside,
assembly instructions
Female cable connector, cable diameter 4-6 mm 6)
tightening torque 0,3Nm
5)
20
fold back
shielding
5
2,5
2,5
20
tightening torque 0,4Nm
Female cable connector, cable diameter 4-6 mm or 6-8 mm 6)
tightening torque 1Nm
tightening torque 0,3Nm
5)
20
5
2,5
2,5
fold back
shielding
20
tightening torque 0,4Nm
Female cable connector, right-angled, can be keyed to 8 angle positions 6)
tightening torque 0,4Nm
fold back
shielding
32
2,5
5)
26
Solder version only
6)
32
2,5
5
5)
Assembly instructions please refer to page 46, conneting instructions
Amphenol
C 091 B
Female cable connector,
bayonet locking outside
Cable diameter 4-6 mm
Description
Drawing
Female cable connector,
for cable diameter 4-6 mm,
termination: solder or crimp,
contact plating: silver or gold,
cable sleeve: black.
Cable diameter 6-8 mm
68
(2.667)
45
(1.772)
No. of
cont.
Part Number solder termination
Contact plating
Contact plating
silver
gold 2)
3 3)
T 3278 501
T 3278 518
T 3278 551
4 3)
T 3328 501
T 3328 518
T 3328 551
T 3378 501
T 3378 518
T 3378 551
T 3398 501
T 3398 518
T 3398 551 4)
T 3428 501
T 3428 518
7
T 3438 501
T 3438 518
7 3)
T 3448 501 4)
T 3448 518 4)
T 3448 551 4)
8 3)
T 3528 501
12
5
5S
20
(DIA.788)
6
62
(2.441)
54
(2.126)
PG 9
Female cable connector,
for cable diameter 4-6 mm,
termination: solder or crimp,
contact plating: silver or gold.
3)
3)
54
(2.126)
1)
Please order crimp contacts separately, see page 43
Amphenol
T 3528 551
T 3628 518 4)
–
14
T 3648 501
4)
T 3648 518
–
3 3)
T 3278 502
T 3278 528 4)
T 3278 552
4
T 3328 502
T 3328 528
4)
T 3328 552
T 3378 502
T 3378 528 4)
T 3378 552
T 3398 528
T 3398 552 4)
3)
T 3398 502
3)
see remark page 20
4)
4)
4)
6 3)
T 3428 502
T 3428 528 4)
T 3428 552
7
T 3438 502
T 3438 528 4)
T 3438 552
T 3448 528
4)
T 3448 552 4)
T 3528 528
4)
T 3528 552 4)
7
3)
T 3448 502
8
3)
T 3528 502
12
T 3628 502
14
4)
T 3628 528 4)
–
T 3648 502
4)
T 3648 528 4)
–
3
3)
T 3278 504
4)
T 3278 548
4)
T 3278 554 4)
4
3)
T 3328 504
4)
T 3328 548
4)
T 3328 554 4)
T 3378 504 4)
T 3378 548 4)
T 3378 554 4)
5 S 3)
T 3398 504 4)
T 3398 548 4)
T 3398 554 4)
6
T 3428 504
T 3428 548
4)
T 3428 554 4)
T 3438 504 4)
T 3438 548 4)
T 3438 554 4)
T 3448 504
T 3448 548
4)
T 3448 554 4)
5
20
(DIA.788)
2)
T 3438 551
T 3628 501
3)
7
PG 7
T 3428 551
4)
T 3528 518 4)
5S
62
(2.441)
Part Number
Crimp termination 1)
4)
5
20
(DIA.788)
Female cable connector,
for cable diameter 6-8 mm,
termination: solder or crimp
with clamping ring,
contact plating: silver or gold.
Cable diameter 4-6 mm
7
3)
4)
4)
8 3)
T 3528 504 4)
T 3528 548 4)
T 3528 554 4)
12
T 3628 504
4)
T 3628 548
4)
–
14
T 3648 504
4)
T 3648 548
4)
3)
Contact order for DIN EN 60 130-9
–
4)
Available upon request.
27
C 091 B
Female cable connector,
bayonet locking outside,
assembly instructions
Female cable connector, cable diameter 4-6 mm 6)
tightening torque 0,3Nm
5)
20
5
2,5
2,5
20
tightening torque 0,4Nm
Female cable connector, cable diameter 4-6 mm or 6-8 mm 6)
tightening torque 1Nm
tightening torque 0,3Nm
5)
20
5
2,5
2,5
20
tightening torque 0,4Nm
5)
Solder version only
28
6)
Assembly instructions please refer to page 46, conneting instructions
Amphenol
C 091 B
Male and female
cable connector, full plastic,
bayonet locking
Description
Drawing
ca. 72
(2.835)
50
(1.969)
Part Number
Crimp termination 1)
3 3)
T 3274 991
–
T 3274 951
4
T 3324 991
–
T 3324 951
T 3374 991
–
T 3374 951
3)
T 3394 991
T 3394 998
–
6 3)
T 3424 991
T 3424 998
T 3424 951
7
T 3434 991
–
T 3434 951
8
–
–
T 3524 951
3 3)
T 3275 991
–
T 3275 951 4)
4
T 3325 991
–
T 3325 951 4)
5
T 3375 991
–
T 3375 951
6 3)
T 3425 991
–
T 3425 951 4)
7
T 3435 991
–
T 3435 951 4)
3 3)
T 3278 991 4)
–
T 3278 951 4)
4 3)
T 3328 991
–
T 3328 951 4)
5
T 3378 991
–
T 3378 951 4)
6 3)
T 3428 991
–
T 3428 951
7
T 3438 991
–
T 3438 951 4)
5S
ca. 67
(2.638)
45
(1.772)
3)
3)
20
(DIA.788)
Female cable connector,
bayonet locking inside,
for cable diameter 4-6 mm,
termination: solder or crimp,
contact plating: silver or gold,
cable sleeve: transparent.
Part Number solder termination
Contact plating
Contact plating
silver
gold 2)
5
20
(DIA.788)
Male cable connector,
bayonet locking inside,
for cable diameter 4-6 mm,
termination: solder or crimp,
contact plating: silver or gold,
cable sleeve: transparent
except of 5S which is black.
No. of
cont.
ca. 69
(2.717)
46,4
(1.827)
4)
20
(DIA.788)
Female cable connector,
bayonet locking outside,
for cable diameter 4-6 mm,
termination: solder or crimp,
contact plating: silver or gold,
cable sleeve: black.
1)
Please order crimp contacts separately, see page 43
Amphenol
2)
see remark page 20
3)
Contact order for DIN EN 60 130-9
4)
Available upon request.
29
17,8 +0,2
(.701)
18,7 +0,2
(.736)
C 091 B
Female receptacle,
bayonet locking outside,
shell: full plastic,
front mounting,
termination: solder or crimp,
panel mounting with ring nut 3),
contact plating: silver or gold.
Ring nut
Drawing
19,5
(.768)
1
(.040)
21
(DIA .827)
Female receptacle,
bayonet locking inside,
shell: full plastic,
front mounting
termination: solder or crimp,
snap-in-mounting,
contact plating: silver or gold.
21
(DIA .827)
9
(.354)
T 3277 018
T 3277 050
T 3327 000
T 3327 018
T 3327 050
T 3377 000
T 3377 018
T 3377 050
–
–
–
6 5)
T 3427 000
T 3427 018
T 3427 050
7
T 3437 000
T 3437 018
T 3437 050
7 5)
–
–
–
8
5)
–
–
–
12
–
–
–
14
–
–
–
3 5)
T 3277 500
T 3277 518
T 3277 550
4
T 3327 500
T 3327 518
T 3327 550
T 3377 500
T 3377 518
T 3377 550
T 3397 500
T 3397 518
T 3397 550 4)
6 5)
T 3427 500
T 3427 518
T 3427 550
7
T 3437 500
T 3437 518
T 3437 550
7
5)
T 3447 500
T 3447 518
8
5)
T 3527 500
12
14
3
5)
5)
13,6
(.535)
12
(.472)
1
(.040)
20
(DIA .788)
M18x0,75
6,6
(.260)
panel cutout see page 16
Please order crimp contacts separately, see page 43
Available upon request.
2)
see remark page 20
5)
3)
T 3447 550 4)
T 3527 518
4)
–
T 3627 500
T 3627 518
4)
–
T 3647 500
T 3647 518 4)
–
5)
T 3271 500
T 3271 518
4)
T 3271 550
4 5)
T 3321 500
T 3321 518 4)
T 3321 550
5
T 3371 500
T 3371 518
T 3371 550
5 S 5)
T 3391 500 4)
T 3391 518 4)
T 3391 550 4)
6
T 3421 500
T 3421 518
4)
T 3421 550
T 3431 500
T 3431 518 4)
T 3431 550
5)
T 3441 500
T 3441 518
4)
T 3441 550 4)
8 5)
T 3521 500
T 3521 518 4)
T 3521 550 4)
12
T 3621 500
T 3621 518
4)
–
14
T 3641 500
T 3641 518
4)
–
3 5)
T 3277 100
–
T 3277 150
4
T 3327 100
–
T 3327 150 4)
5
T 3377 100
–
T 3377 150 4)
5 S 5)
T 3397 100
–
T 3397 150
6 5)
T 3427 100
–
T 3427 150 4)
7
T 3437 100
–
T 3437 150 4)
–
T 3447 150
7
max. panel thickness 1,5 +0,25
30
T 3277 000
4 5)
5)
7
24,5
(.965)
4)
3 5)
5S
max. panel thickness 1,5 +0,25
1)
Part Number
Crimp termination 1)
5
23
(.906)
Female receptacle,
bayonet locking outside,
shell: metal,
rear mounting,
termination: solder or crimp,
panel mounting with ring nut 3),
contact plating: silver.
Part Number solder termination
Contact plating
Contact plating
silver
gold 2)
5S
7,5
(.295)
Panel cutout
No. of
cont.
5
7,5
(.295)
Female receptacle,
bayonet locking outside,
shell: full plastic,
front mounting,
termination: solder or crimp,
snap-in-mounting,
contact plating: silver or gold.
Bayonet inside
Bayonet outside
21
(DIA .827)
Description
3,15 +0,1
(.124)
M18x0,75
Female receptacle,
bayonet locking
5)
7 5)
T 3447 100
8
5)
T 3527 100
4)
4)
–
T 3527 150
12
T 3627 100
4)
–
–
14
T 3647 100 4)
–
–
Panel mounting with hex nut upon request
Amphenol
C 091 B
metal
5
(.197)
15
(.591)
1
2
5
(.197)
15
(.591)
1,3
(.051)
4
5
6
6 Pol.
6 Pol.
2,5
(.098)
5
(.197)
4
10
(.393)
2
1
3
5
(.197)
15
(.591)
7,5
(.295)
3
2,4
(.094)
2,4
(.094)
7,5
(.295)
5
1
3
C091B-83a
Contact order for DIN EN 60 130-9
2
1
5
(.197)
15
(.591)
5
3
8
4 6
2
2,5
(.098)
5
(.197)
7
1
5
(.197)
15
(.591)
7,5
(.295)
3
4 6
8 Pol.
8 Pol.
2,5
(.098)
5
(.197)
15
(.591)
1
5
10
(.393)
1,3
(.051)
2,5
(.098)
2,4
(.094)
2,4
(.094)
7,5
(.295)
2,5
(.098)
2,4
(.094)
Amphenol
2
7
Pol.
77 Pol.
7,5
(.295)
14,3
.563
1
3
5
(.197)
15
(.591)
4
10
(.393)
1,3
(.051)
2,5
(.098)
5
(.197)
2
5
Pol.Ste
Stereo
55Pol.
eo
2,4
(.094)
5
(.197)
3
10
(.393)
1,3
(.051)
2,5
(.098)
5
(.197)
21
(.827)
3 Pol.
1,3
(.051)
T 3277 900
–
–
T 3397 900
–
–
T 3447 900
T 3527 900
–
–
3 1)
A
4 1)
1,8
23
5
(.905)
(.071)
5 S 1)
6 1)
7
7,5
7 1)
(.295)
8 1)
A 3pol.
=14 (.551)
5pol. +7pol. =15,9 (.626)
12
8pol.
=18 (.709)
C091B-52a 14
9,5
(.374)
21,5
(.847)
3,5
(.137)
PCB-layout
components side
Part Number solder termination
contact plating silver
17
(DIA.669)
Female receptacle,
bayonet locking outside,
right- angled,
shell: metal,
contact plating: silver.
No. of
cont.
2,5
(.098)
Drawing
7,5
(.295)
Description
2,5
(.098)
1)
5
(.197)
15
(.591)
2,5
(.098)
2,4
(.094)
5
2
5 Pol.
Pol. Ste
Stereo
5
reo
2,5
(.098)
4
1
10
(.393)
1,3
(.051)
2,5
(.098)
5
(.197)
1,3
(.051)
2,5
(.098)
5
(.197)
2
5 Pol.
Pol.
5
10
(.393)
2,5
(.098)
2,4
(.094)
3 Pol.
1,3
(.051)
3
=14 (.551)
=15,9 (.626)
=18 (.709)
7,5
(.295)
13,5
.531
21
(.827)
23
(.905)
3,5
(.137)
PCB-layout
components side
T 3277 600
–
T 3377 600
T 3397 600
T 3427 600
–
–
–
–
–
3 1)
4 1)
5
5 S 1)
6 1)
7
7,5
7 1)
(.295)
8 1)
12
C091B-49a 14
9,5
A
(.374)
1,8
(.071)
21,5
(.847)
A 3pol.
5pol.
6pol.
Part Number solder termination
contact plating silver
17
(DIA.669)
Female receptacle,
bayonet locking outside,
right- angled,
shell: full plastic black,
contact plating: silver.
No. of
cont.
2,5
(.098)
5
(.197)
Drawing
7,5
(.295)
Description
full plastic
2,5
(.098)
Female receptacle,
bayonet locking outside
right-angled, pcb mount type
C091B-84a
31
17,8 +0,2
(.701)
18,7 +0,2
(.736)
C 091 B
3,15 +0,1
(.124)
Male receptacle,
bayonet locking, outside
Male receptacle,
bayonet locking outside,
front mounting,
shell: full plastic,
termination: solder or crimp,
snap-in-mounting,
contact plating: silver or gold.
Drawing
7,5
(.295)
21
(DIA .827)
Description
Panel cutout
max. panel thickness 1,5 +0,25
4)
Part Number solder termination
Contact plating
Contact plating
silver
gold 2)
3 5)
T 3276 500
T 3276 518 4)
T 3276 550
4
T 3326 500
T 3326 518 4)
T 3326 550
5
T 3376 500
T 3376 518
T 3376 550
5 S 5)
T 3396 500 4)
T 3396 518 4)
T 3396 550 4)
6 5)
T 3426 500
T 3426 518 4)
T 3426 550
7
T 3436 500
T 3436 518 4)
T 3436 550
T 3446 518
T 3446 550 4)
7
5)
5)
8 5)
23
(.906)
1)
No. of
cont.
12
C091B-85a 14
Please order crimp contacts separately, see page 43 2) see remark page 20
Available upon request. 5) Contact order for DIN EN 60 130-9
3)
T 3446 500
4)
4)
4)
Part Number
Crimp termination 1)
T 3526 500 4)
T 3526 518 4)
T 3526 550
T 3626 500
T 3626 518
4)
–
T 3646 518 4)
–
4)
T 3646 500 4)
Panel mounting with hex nut upon request
Panel Version 1
for female receptacle e.g. T 3277 200
Fig. C 091B-1
17
(DIA ,2
.677
)
4
( .1
57)
Panel Version 2
for female receptacle e.g. T 3277 200
Fig. C 091B-108a
20
(DIA ,5
.807
)
4
( .1
57)
32
Amphenol
C 091 D
Main Features
• Metal locking ring; screw locking according to DIN EN 60130-9 / IEC 60130-9
• Full metal construction
• Protection class IP 65 and IP 67
• Number of contacts: 3 – 8, 12 and 14 contacts
• Internal strain relief
• Good shielding effectiveness when mated and locked
• Male and female cable connectors
- Straight or right angled
- Solder connection: 3 – 8, 12 and 14 contacts
- Crimp connection: 3 – 8 contacts
- With cable glands for cable diameter 4 – 6 mm or 6 – 8 mm
• Male and female receptacles
- Panel mount types for front or rear panel mounting
- Pcb mount types, straight
- With 4-hole flange
- With dip solder contacts of various contact lengths
- Solder connection: 3 – 8, 12 and 14 contacts
- Crimp connection: 3 – 8 contacts
• UL registered under file number E 63 093 UL
1)
UNDERWRITERS LABORATORIES INC.
In general approvals refer to representative versions of the connector series. Test report upon request.
Amphenol
1)
333
C 091 D
Characteristics
General Characteristics
Standard
Characteristics
Number of contacts
3
4
5 Stereo
6
41 524 45 322
60130-9 60130-9
100V –~
7
1
3
4
2
1
2
6
5
4
3
1
7
300 V –~
Rated voltage
UL 1977
Rated impulse withstand voltage
IEC 60664-1
Pollution degree
IEC 60664-1
1
Installation category
IEC 60664-1
I
Insulation group
IEC 60664-1
II, 400 ≤ CTI < 600
Current rating
IEC 60512-5-2
Test 5 b
UL 1977
Insulation resistance
IEC 60512-3-1
Test 3 a
> 10 10 Ω
Contact resistance
IEC 60512-2-1
Test 2 a
<5mΩ
1500 V
1200 V
1500 V
1200 V
IEC 60668-1
40 / 100 / 56
Temperature range
IEC 60668-1
- 40 °C ... + 100 °C / - 40 °F ... + 212 °F
Mechanical Characteristics
IP-degree
IEC 60529
IP 67 / IP 65
IEC 60512
Test 9 a
30 N
110.oz
35 N
125.oz
50 N
180.oz
55 N
200.oz
die cast, nickel plated
Dielectric material
thermoplastic
Sealing material
neoprene
Contact plating
silver plated / gold plated *
Wire gauge
3 A / + 40 °C /
+ 104 °F
60 N
220.oz
solder, crimp
solder
solder: ≤ 0,5 mm / 20 AWG
crimp: 2 - 6 pol (excluding 5S): 0,09 - 1,00 mm2 / 28 - 18 AWG
crimp: 5S, 7, 7S and 8-pol.: 0,09 - 0,75 mm2 / 28 - 20 AWG
≤ 0,25 mm 2/ 24 AWG
2
Flammability
50 N
180.oz
Silver ≥ 500 mating cycles
Gold ≥ 1000 mating cycles
Materials
Housing material
Further Characteristics
Termination technique
–
–
60 V
5 A / + 40 °C / + 104 °F
please refer also to current derating curves page 45
25 N
90.oz
–
–
150 V –~
250 V
Climatic Characteristics
Climatic category
Mechanical operation
3
7
100 V –~
IEC 60664-1
IEC 60512-13-2
Test 13 b
8
45 329 45 326
60130-9 60130-9
–
–
Rated voltage
Insertion and withdrawal forces
5
2
6
A
6
5
B
1
DC
5
4
2
K
H J
5
3
L
O N
M
2
G
1
A
300 V –~
–
–
4
B
41 524
–
60130-9 60130-9
5
14
E
F
3
4
1
12
L
4
8
DC
1
7
M
K
H J
Contact arrangement acc. to DIN
Contact arrangement acc. to IEC
Electrical Characteristics
3
7
4
G
3
2
1
6
E
F
2 3
2
View on termination side
of contact insert
5
UL 94 V0
Locking system
IEC 60130-9
UL
UL 1977
metal screw coupling; tightening torque 0,5 - 0,7 Nm
Conditions of acceptability
Caution: Do not connect or disconnect under load. Metal housing parts shall be securely incorporated to protected ground.
* Remark for gold plated contacts: In order to avoid brittle inter-metallic connections, gold-plated terminals have to be tin-plated in the solder area.
^
^
34 IEC 60 664 = DIN VDE 0110 ; IEC 60 512-x = DIN EN 60 512-x
Amphenol
C 091 D
Male cable connector
Description
Drawing
Male cable connector, straight,
for cable diameter 4-6 mm,
termination: solder or crimp,
contact plating: silver or gold.
No. of
cont.
57
(2.244)
18
(DIA.709)
SW 16
PG 7
Male cable connector, straight,
for cable diameter 6-8 mm,
termination: solder or crimp,
contact plating: silver or gold.
58
(2.28)
18
(DIA.709)
SW 16
PG 9
1)
Please order crimp contacts separately, see page 43
2)
see remark page 34
3)
3 3)
4 3)
5
5S 3)
6 3)
7
7 3)
8 3)
12
14
3 3)
4 3)
5
5S 3)
6 3)
7
7 3)
8 3)
12
14
Part Number solder termination
Contact plating
Contact plating
silver
gold 2)
C091 31H003 100 2 –
C091 31H004 100 2 –
C091 31H005 100 2 C091 31H005 200 2
C091 31H105 100 2 C091 31H105 200 2
C091 31H006 100 2 C091 31H006 200 2
C091 31H007 100 2 –
C091 31H107 100 2 C091 31H107 200 2
C091 31H008 100 2 C091 31H008 200 2
C091 31H012 100 2 C091 31H012 200 2
C091 31H014 100 2 C091 31H014 200 2
C091 31H003 101 2 –
C091 31H004 101 2 –
C091 31H005 101 2 –
C091 31H105 101 2 –
C091 31H006 101 2 –
C091 31H007 101 2 C091 31H007 201 2
C091 31H107 101 2 –
C091 31H008 101 2 C091 31H008 201 2
C091 31H012 101 2 C091 31H012 201 2
–
C091 31H014 201 2
Part Number
Crimp termination 1)
C091 11H003 000 2
C091 11H004 000 2
C091 11H005 000 2
C091 11H105 000 2
C091 11H006 000 2
C091 11H007 000 2
C091 11H107 000 2
C091 11H008 000 2
–
–
C091 11H003 001 2
C091 11H004 001 2
C091 11H005 001 2
C091 11H105 001 2
C091 11H006 001 2
C091 11H007 001 2
C091 11H107 001 2
C091 11H008 001 2
–
–
Contact order for DIN EN 60 130-9
Assembly instructions 6)
tightening torque
0,4 Nm ‘
tightening torque cable
0,5 - 1 Nm
1,8 - 3,6 oz
cable
6-8
tightening torque
0,5 - 1 Nm
1,8 - 3,6 oz
20
Solder version only
Amphenol
tightening torque
1-2 Nm (in consideration
of the cable used)
shielding application
for large cable
diameter
20
2,5
5)
4-6
2,5
6)
5
fold back
shielding
Assembly instructions please refer to page 46, conneting instructions
35
C 091 D
Female cable connector
Description
Drawing
Female cable connector, straight,
for cable diameter 4-6 mm,
termination: solder or crimp,
contact plating: silver or gold.
No. of
cont.
58
(2.283)
18
(DIA.709)
SW 16
PG 7
Female cable connector, straight,
for cable diameter 6-8 mm,
termination: solder or crimp,
contact plating: silver or gold.
58,3
(2.283)
18
(DIA.709)
SW 16
PG 9
1)
Please order crimp contacts separately, see page 43
2)
see remark page 34
3)
3 3)
4 3)
5
5S 3)
6 3)
7
7 3)
8 3)
12
14
3 3)
4 3)
5
5S 3)
6 3)
7
7 3)
8 3)
12
14
Part Number solder termination
Contact plating
Contact plating
silver
gold 2)
C091 31D003 100 2 –
C091 31D004 100 2 –
C091 31D005 100 2 C091 31D005 200 2
C091 31D105 100 2 –
C091 31D006 100 2 C091 31D006 200 2
C091 31D007 100 2 –
C091 31D107 100 2 –
C091 31D008 100 2 C091 31D008 200 2
C091 31D012 100 2 C091 31D012 200 2
C091 31D014 100 2 C091 31D014 200 2
C091 31D003 101 2 –
C091 31D004 101 2 –
C091 31D005 101 2 –
C091 31D105 101 2 –
C091 31D006 101 2 –
C091 31D007 101 2 C091 31D007 201 2
C091 31D107 101 2 –
C091 31D008 101 2 C091 31D008 201 2
–
C091 31D012 201 2
–
C091 31D014 201 2
Part Number
Crimp termination 1)
C091 11D003 000 2
C091 11D004 000 2
C091 11D005 000 2
C091 11D105 000 2
C091 11D006 000 2
C091 11D007 000 2
C091 11D107 000 2
C091 11D008 000 2
–
–
C091 11D003 001 2
C091 11D004 001 2
C091 11D005 001 2
C091 11D105 001 2
C091 11D006 001 2
C091 11D007 001 2
C091 11D107 001 2
C091 11D008 001 2
–
–
Contact order for DIN EN 60 130-9
Assembly instructions 6)
tightening torque
0,4 Nm ‘
tightening torque cable
0,5 - 1 Nm
1,8 - 3,6 oz
cable
6-8
4-6
tightening torque
1-2 Nm (in consideration
of the cable used)
shielding application
tightening torque for large cable
0,5 - 1 Nm
diameter
1,8 - 3,6 oz
20
2,5
20
5)
36
Solder version only
2,5
6)
5
fold back
shielding
Assembly instructions please refer to page 46 , conneting instructions
Amphenol
C 091 D
Connector Right Angle
Drawing
Part Number
solder termination
Contact plating silver
Part Number
Crimp termination 1)
3 3)
4 3)
5
5S 3)
6 3)
M16x0,75
19,5
7
(DIA.767)
7 3)
8 3)
12
14
(.551)
14
Maß A
3 3)
(dimension A)
4 3)
5
5S 3)
6 3)
M16x0,75
19,5
7
(DIA.767)
7 3)
8 3)
12
14
(.551)
14
3)
Contact order for DIN EN 60 130-9
C091 31K003 100 2
C091 31K004 100 2
C091 31K005 100 2
C091 31K105 100 2
C091 31K006 100 2
C091 31K007 100 2
C091 31K107 100 2
C091 31K008 100 2
C091 31K012 100 2
C091 31K014 100 2
C091 31K003 101 2 5)
C091 31K004 101 2 5)
C091 31K005 101 2
C091 31K105 101 2
C091 31K006 101 2
C091 31K007 101 2
C091 31K107 101 2
C091 31K008 101 2
C091 31K012 101 2
C091 31K014 101 2
5)
Available upon request.
C091 11K003 000 2
C091 11K004 000 2
C091 11K005 000 2
C091 11K105 000 2
C091 11K006 000 2
C091 11K007 000 2
C091 11K107 000 2
C091 11K008 000 2
–
–
C091 11K003 001 2 5)
C091 11K004 001 2 5)
C091 11K005 001 2 5)
C091 11K105 001 2 5)
C091 11K006 001 2
C091 11K007 001 2
C091 11K107 001 2
C091 11K008 001 2
–
–
Maß A
(dimension A)
20,5
(.807)
Male cable connector, right angled,
for cable diameter 6-8 mm,
termination: solder or crimp.
Dimension A = 57,5 mm
38
(1.496)
20,5
(.807)
Male cable connector, right angled,
for cable diameter 4-6 mm,
termination: solder or crimp.
Dimension A = 55,5 mm
No. of
cont.
38
(1.496)
Description
1)
Please order crimp contacts separately, see page 43
Assembly instructions 4)
Can be keyed to 8 angle positions
fold back
shielding
tightening torque
0,4 Nm
shielded
tightening torque
30
1-2 Nm
(in consideration
2,5
unshielded of the cable used)
5
30
tightening torque
0,4 Nm
2,5
coding options
shielding application
for large cable diameter
For assembly Instructions please refer to page 46, conneting instructions
Amphenol
4)
37
C 091 D
Connector Right Angle
Drawing
Female cable connector,
right angled,
for cable diameter 4-6 mm,
termination: solder or crimp.
Dimension A = 55,5 mm
Maß A
(dimension A)
38
(1.496)
Description
M16x0,75
20,5
(.807)
19,5
(DIA.767)
14
(.551)
Maß A
(dimension A)
38
(1.496)
Female cable connector,
right angled,
for cable diameter 6-8 mm,
termination: solder or crimp.
Dimension A = 57,5 mm
M16x0,75
20,5
(.807)
19,5
(DIA.767)
14
(.551)
1)
No. of
cont.
Part Number
solder termination
Contact plating silver
Part Number
Crimp termination 1)
3 3)
4 3)
5
5S 3)
6 3)
7
7 3)
8 3)
12
14
3 3)
4 3)
5
5S 3)
6 3)
7
7 3)
8 3)
12
14
C091 31F003 100 2
C091 31F004 100 2
C091 31F005 100 2
C091 31F105 100 2
C091 31F006 100 2
C091 31F007 100 2
C091 31F107 100 2
C091 31F008 100 2
C091 31F012 100 2
C091 31F014 100 2
C091 31F003 101 2 5)
C091 31F004 101 2 5)
C091 31F005 101 2
C091 31F105 101 2
C091 31F006 101 2
C091 31F007 101 2
C091 31F107 101 2
C091 31F008 101 2
C091 31F012 101 2
C091 31F014 101 2
C091 11F003 000 2
C091 11F004 000 2
C091 11F005 000 2
C091 11F105 000 2
C091 11F006 000 2
C091 11F007 000 2
C091 11F107 000 2
C091 11F008 000 2
–
–
C091 11F003 001 2 5)
C091 11F004 001 2 5)
C091 11F005 001 2 5)
C091 11F105 001 2 5)
C091 11F006 001 2
C091 11F007 001 2
C091 11F107 001 2
C091 11F008 001 2
–
–
Please order crimp contacts separately, see page 43 3) Contact order for DIN EN 60 130-9
5)
Available upon request
Assembly instructions 4)
Can be keyed to 8 angle positions
fold back
shielding
tightening torque
0,4 Nm
shielded
30
tightening torque
2,5
unshielded
5
1-2 Nm
(in consideration
of the cable used)
30
tightening torque
0,4 Nm
2,5
coding options
shielding application
for large cable diameter
For assembly Instructions please refer to page 46, conneting instructions
38
4)
Amphenol
12,8
(.505)
M18x0,75
20
(DIA .788)
1,5
(.060)
16,1
(.634)
Female receptacle,
termination: straight dip solder,
contact plating: silver or gold,
pin length 15 mm from flange,
panel mounting with ring nut,
sealing with O-Ring,
solder area: tin plated.
1,5
(.060)
M18x0,75
20
(DIA .788)
12,8
(.505)
15
(.591)
M18x0,75
4,0
(.157)
Please order crimp contacts separately, see page 43
Amphenol
1,5
(.060)
20
(DIA .788)
12,8
(.505)
4,0
(.157)
1)
19
(.748)
M18x0,75
Female receptacle,
termination: straight dip solder,
contact plating: silver,
pin length 24 mm from flange,
panel mounting with ring nut,
sealing with O-Ring,
solder area: tin plated.
1,5
(.060)
20
(DIA .788)
12,8
(.505)
24
(.945)
2)
see remark page 34
Part Number solder termination
Contact plating
Contact plating
silver
gold 2)
C091 31N003 100 2 –
C091 31N004 100 2 –
C091 31N005 100 2 C091 31N005 200 2
C091 31N105 100 2 –
C091 31N006 100 2 –
C091 31N007 100 2 –
C091 31N107 100 2 –
C091 31N008 100 2 C091 31N008 200 2
C091 31N012 100 2 C091 31N012 200 2
C091 31N014 100 2 C091 31N014 200 2
C091 61N003 110 2 –
C091 61N004 110 2 –
C091 61N005 110 2 –
C091 61N105 110 2 –
C091 61N006 110 2 –
C091 61N007 110 2 –
C091 61N107 110 2 –
C091 61N008 110 2 –
–
C091 61N012 210 2
–
C091 61N014 210 2
C091 61N003 120 2 –
C091 61N004 120 2 –
C091 61N005 120 2 –
C091 61N105 120 2 –
C091 61N006 120 2 –
C091 61N007 120 2 –
C091 61N107 120 2 –
C091 61N008 120 2 –
–
–
–
–
C091 61N003 130 2 –
C091 61N004 130 2 –
C091 61N005 130 2 –
C091 61N105 130 2 –
C091 61N006 130 2 –
C091 61N007 130 2 –
C091 61N107 130 2 –
C091 61N008 130 2 –
–
–
–
–
3 3)
4
5
5S 3)
6 3)
7
7 3)
8 3)
12
14
3 3)
4 3)
5
5S 3)
6
7
7 3)
8 3)
12
14
3 3)
4 3)
5
5S 3)
6 3)
7
7 3)
8 3)
12
14
3 3)
4 3)
5
5S 3)
6 3)
7
7 3)
8 3)
12
14
3)
Contact order for DIN EN 60 130-9
4)
,1
No. of
cont.
1 -0 )
2, 3
R .08
(R
Drawing
Female receptacle,
termination: solder or crimp,
contact plating: silver or gold,
panel mounting with ring nut,
sealing with O-Ring.
Female receptacle,
termination: straight dip solder,
contact plating: silver,
pin length 19 mm from flange,
panel mounting with ring nut,
sealing with O-Ring,
solder area: tin plated.
18 +0,1
(.709)
8,
(.3 2 +0,1
23
)
For sealing reasons the
surface for the gasket needs
to be level and free of burrs.
Female receptacle
for front mounting
Description
8,2 +0,1
(.323)
max.5mm
max.
5 mm
Tightening
torque 0,7 Nm
C 091 D
Panel cutout
Part Number
Crimp termination 1)
C091 11N003 000 2
C091 11N004 000 2
C091 11N005 000 2
C091 11N105 000 2
C091 11N006 000 2
C091 11N007 000 2
C091 11N107 000 2
C091 11N008 000 2
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Available upon request.
39
max.3,5mm
max. 3,5 mm
Tightening
torque 0,7 Nm
No. of
cont.
M18x0,75
20
(DIA .788)
12,3
(.484)
11,6
(.457)
12,3
(.484)
M18x0,75
20
(DIA .788)
Female receptacle,
termination: straight dip solder,
contact plating: silver or gold,
pin length 10.5 mm from flange,
panel mounting with ring nut,
sealing with O-Ring,
solder area: tin plated.
10,5
(.413)
4,0
(.157)
Please order crimp contacts separately, see page 43
40
M18x0,75
5,5
(.217)
12,3
(.484)
4,0
(.157)
1)
14,5
(.570)
M18x0,75
20
(DIA .788)
Female receptacle,
termination: straight dip solder,
contact plating: silver,
pin length 19,5 mm from flange,
panel mounting with ring nut,
sealing with O-Ring,
solder area: tin plated.
5,5
(.217)
12,3
(.484)
20
(DIA .788)
Female receptacle,
termination: straight dip solder,
contact plating: silver,
pin length 14,5 mm from flange,
panel mounting with ring nut,
sealing with O-Ring,
solder area: tin plated.
5,5
(.217)
19,5
(.767)
2)
5,5
(.217)
see remark page 34
Part Number solder termination
Contact plating
Contact plating
silver
gold 2)
C091 31G003 100 2 –
C091 31G004 100 2 C091 31G004 200 2
C091 31G005 100 2 C091 31G005 200 2
C091 31G105 100 2 –
C091 31G006 100 2 –
C091 31G007 100 2 C091 31G007 200 2
C091 31G107 100 2 –
C091 31G008 100 2 C091 31G008 200 2
C091 31G012 100 2 C091 31G012 200 2
C091 31G014 100 2 C091 31G014 200 2
C091 61G003 110 2 –
C091 61G004 110 2 –
C091 61G005 110 2 –
C091 61G105 110 2 –
C091 61G006 110 2 C091 G006 210 2
C091 61G007 110 2 –
C091 61G107 110 2 –
C091 61G008 110 2 –
C091 61G012 110 2 C091 61G012 210 2
C091 61G014 110 2 C091 61G014 210 2
C091 61G003 120 2 –
C091 61G004 120 2 –
C091 61G005 120 2 –
C091 61G105 120 2 –
C091 61G006 120 2 –
C091 61G007 120 2 –
C091 61G107 120 2 –
C091 61G008 120 2 –
–
–
–
–
C091 61G003 130 2 –
C091 61G004 130 2 –
C091 61G005 130 2 –
C091 61G105 130 2 –
C091 61G006 130 2 –
C091 61G007 130 2 –
C091 61G107 130 2 –
C091 61G008 130 2 –
–
–
–
–
3 3)
4 3)
5
5S 3)
6 3)
7
7 3)
8 3)
12
14
3 3)
4 3)
5
5S 3)
6 3)
7
7 3)
8 3)
12
14
3 3)
4 3)
5
5S 3)
6 3)
7
7 3)
8 3)
12
14
3 3)
4 3)
5
5S 3)
6 3)
7
7 3)
8 3)
12
14
3)
Contact order for DIN EN 60 130-9
4)
,1
Female receptacle,
termination: solder or crimp,
contact plating: silver or gold,
panel mounting with ring nut,
sealing with O-Ring.
Drawing
-0
1 )
2, 3
R .08
(R
8
,
(.3 2 +0
23
)
For sealing reasons the
surface for the gasket needs
to be level and free of burrs.
Female receptacle
for rear mounting
Description
18 +0,1
(.709)
8,2 +0,1
(.323)
C 091 D
Panel cutout
Part Number
Crimp termination 1)
C091 11G003 000 2
C091 11G004 000 2
C091 11G005 000 2
C091 11G105 000 2
C091 11G006 000 2
C091 11G007 000 2
C091 11G107 000 2
C091 11G008 000 2
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Available upon request.
Amphenol
17,2 +0,2
(.677)
C 091 D
Drawing
No. of
cont.
3 3)
4 3)
5
5S 3)
6 3)
7
7 3)
8 3)
12
14
Female receptacle,
sealing with O-Ring,
termination: solder or crimp,
contact plating: silver or gold,
with sealing gasket.
max.3,5mm
max.
3,5 mm Tightening
torque 0,7 Nm
C 091 D
3,2 +0,1
(.126)
,1
Drawing
No. of
cont.
M18x0,75
20
(DIA .788)
8,3
(.327)
Please order crimp contacts separately, see page 43
Amphenol
18 +0,1
(.709)
Panel Cutout
6,5
(.256)
1)
–
–
C091 11T005 000 2
–
–
C091 11T007 000 2
C091 11T107 000 2
–
–
–
1 -0 )
2, 3
R .08
(R
Male receptacle,
termination: solder or crimp,
contact plating: silver or gold,
panel mounting with ring nut,
sealing with O-Ring.
Part Number
Crimp termination 1)
For sealing reasons
the surface for the
gasket needs to be
level and free of burrs.
Male receptacle
for front mounting
Description
Part Number solder termination
Contact plating
Contact plating
silver
gold 2)
C091 31T003 100 2 C091 31T003 200 2
C091 31T004 100 2 C091 31T004 200 2
C091 31T005 100 2 –
C091 31T105 100 2 –
C091 31T006 100 2 C091 31T006 200 2
C091 31T007 100 2 C091 31T007 200 2
C091 31T107 100 2 –
C091 31T008 100 2 –
C091 31T012 100 2 C091 31T012 200 2
C091 31T014 100 2 C091 31T014 200 2
8,2 +0,1
(.323)
Description
20 ±0,1
(.787)
Panel Cutout
8,2
Female receptacle
for flange mounting
8,2
( 323)
For sealing reasons the
surface for the gasket
needs to be level and free
of burrs. Provide suitable
sealing for the screws.
16
(.630)
2)
see remark page 34
3 3)
4 3)
5
5S 3)
6 3)
7
7 3)
8 3)
12
14
3)
Part Number solder termination
Contact plating
Contact plating
silver
gold 2)
C091 31W003 100 2 C091 31W003 200 2
C091 31W004 100 2 C091 31W004 200 2
C091 31W005 100 2 C091 31W005 200 2
C091 31W105 100 2 C091 31W105 200 2
C091 31W006 100 2 C091 31W006 200 2
C091 31W007 100 2 C091 31W007 200 2
C091 31W107 100 2 C091 31W107 200 2
C091 31W008 100 2 C091 31W008 200 2
C091 31W012 100 2 C091 31W012 200 2
C091 31W014 100 2 C091 31W014 200 2
Part Number
Crimp termination 1)
C091 11W003 000 2
C091 11W004 000 2
C091 11W005 000 2
C091 11W105 000 2
C091 11W006 000 2
C091 11W007 000 2
C091 11W107 000 2
C091 11W008 000 2
–
–
Contact order for DIN EN 60 130-9
41
max.3,5mm
max. 3,5 mm
C 091 D
8,2 +0,1
(.323)
Tightening
torque 0,7 Nm
M18x0,75
16
(.630)
Part Number solder termination
Contact plating
Contact plating
silver
gold 2)
C091 31C003 100 2 C091 31C003 200 2
C091 31C004 100 2 C091 31C004 200 2
C091 31C005 100 2 C091 31C005 200 2
C091 31C105 100 2 C091 31C105 200 2
C091 31C006 100 2 C091 31C006 200 2
C091 31C007 100 2 C091 31C007 200 2
C091 31C107 100 2 C091 31C107 200 2
C091 31C008 100 2 C091 31C008 200 2
C091 31C012 100 2 C091 31C012 200 2
C091 31C014 100 2 C091 31C014 200 2
3 3)
4 3)
5
5S 3)
6 3)
7
7 3)
8 3)
12
14
Description
Panel Cutout
Drawing
No. of
cont.
1)
Please order crimp contacts separately, see page 43
42
Part Number solder termination
Contact plating
Contact plating
silver
gold 2)
C091 31S003 100 2 –
C091 31S004 100 2 –
C091 31S005 100 2 –
C091 31S105 100 2 –
C091 31S006 100 2 C091 31S006 200 2
C091 31S007 100 2 –
C091 31S107 100 2 –
C091 31S008 100 2 C091 31S008 200 2
C091 31S012 100 2 C091 31S012 200 2
C091 31S014 100 2 C091 31S014 200 2
3 3)
4 3)
5
5S 3)
6 3)
7
7 3)
8 3)
12
14
Male receptacle,
sealing with O-Ring,
termination: solder or crimp,
contact plating: silver or gold,
with sealing gasket.
2)
see remark page 34
3)
C091 11C003 000 2
C091 11C004 000 2
C091 11C005 000 2
C091 11C105 000 2
C091 11C006 000 2
C091 11C007 000 2
C091 11C107 000 2
C091 11C008 000 2
–
–
,
( 323)
Male receptacle
for flange mounting
Part Number
Crimp termination 1)
17,2 +0,2
(.677)
C 091 D
For sealing reasons the
surface for the gasket
needs to be level and free
of burrs. Provide suitable
sealing for the screws.
Panel Cutout
3,2 +0,1
(.126)
14
(.551)
20
(DIA .788)
3,8
(.150)
No. of
cont.
,1
Male receptacle,
termination: solder or crimp,
contact plating: silver or gold,
panel mounting with ring nut,
sealing with O-Ring.
Drawing
1 -0 )
2, 3
R .08
(R
8
(.3 ,2 +0,
23
)
For sealing reasons the
surface for the gasket needs
to be level and free of burrs.
Male receptacle
for rear mounting
Description
18 +0,1
(.709)
20 ±0,1
(.787)
Part Number
Crimp termination 1)
C091 11S003 000 2
–
C091 11S005 000 2
–
–
C091 11S007 000 2
C091 11S107 000 2
–
–
–
Contact order for DIN EN 60 130-9
Amphenol
C 091
Stamped single contacts
Stamped contacts on reel for hand crimping tools
Stamped contacts on reel for crimp machines
200 pcs
2000 pcs
(feeding left or
right hand side)
packaging unit 100 pcs
Crimp contacts
Type of Contact
Contact Ø
Wire Gauge
max. Insul. Ø
Supplied as
Pcs.
silver
1.5 mm
Pin contact
0.09-0.25 mm2
0.35-0.50 mm2
0.7-1.6
1.0-2.0
single contact
100
VN01 015 0052 (1)
VN01 015 0052 (2)
contacts on reel
200
ZN01 015 0052 (1)
ZN01 015 0052 (2)
right
2000
HN01 015 0052 (1)
HN01 015 0052 (2)
left
2000
TN01 015 0052 (1)
TN01 015 0052 (2)
100
VN01 015 0046 (1)
VN01 015 0046 (2)
200
ZN01 015 0046 (1)
ZN01 015 0046 (2)
right
2000
HN01 015 0046 (1)
HN01 015 0046 (2)
left
2000
TN01 015 0046 (1)
TN01 015 0046 (2)
100
VN01 015 0047 (1)
VN01 015 0047 (2)
single contact
contacts on reel
0.75-1.0 mm
1.6-2.1
2
single contact
200
ZN01 015 0047 (1)
ZN01 015 0047 (2)
right
2000
HN01 015 0047 (1)
HN01 015 0047 (2)
left
2000
TN01 015 0047 (1)
TN01 015 0047 (2)
100
VN02 015 0052 (1)
VN02 015 0052 (2)
contacts on reel
Socket contact
0.09-0.25 mm
1.5 mm
2
0.7-1.6
single contact
200
ZN02 015 0052 (1)
ZN02 015 0052 (2)
right
2000
HN02 015 0052 (1)
HN02 015 0052 (2)
left
contacts on reel
0.35-0.50 mm
0.75-1.0 mm
Connecting Range
Wire Gauge
2
2
1.0-2.0
1.6-2.1
2000
TN02 015 0052 (1)
TN02 015 0052 (2)
single contact
100
VN02 015 0046 (1)
VN02 015 0046 (2)
contacts on reel
200
ZN02 015 0046 (1)
ZN02 015 0046 (2)
right
2000
HN02 015 0046 (1)
HN02 015 0046 (2)
left
2000
TN02 015 0046 (1)
TN02 015 0046 (2)
single contact
100
VN02 015 0047 (1)
VN02 015 0047 (2)
contacts on reel
200
ZN02 015 0047(1)
ZN02 015 0047 (2)
right
2000
HN02 015 0047 (1)
HN02 015 0047 (2)
left
2000
TN02 015 0047 (1)
TN02 015 0047 (2)
Stripping length
Crimp height
(average values)
mm 2
mm 2
AWG
mm
mm
0.09-0.25
0.09
28
3.0 + 0.5
0.85-0.89
26
0.86-0.90
24
0.75-1,00
22
0.50
20
0.75
11
18
28
0.25
0.35
h max
mm
Crimp retention
force acc.
DIN EN 60352-2
N
15
0.14
0.35-0.50
Part Number
gold
0.91-0.97
32
3.0 + 0.5
0.90-1.06
40
0.95-1.11
60
3.5 + 1.0
1.33-1.50
85
1.36-1.53
108
18
1.00
90
These min. values are based on the copper wire tensile strength with δB ≈ 230 N/mm 2.
Amphenol
43
C 091
Accessories
Drawing
Part Number
Spanner wrench
for receptacles with ring nut.
C 091 A
C 091 B
C 091 D
N 45 091-000 1
Spanner wrench
for male and female cable
connectors.
C 091 A
C 091 B
C 091 D
FH 0300-091
Protective cover
for male cable connectors
and male receptacles.
C 091 A
C 091 D
for male cable connectors
C 091 00U000 120 2
L = 85 mm
M16x0,75
18
M16x0,75
18
Knurled ring-nut for male and
female receptacles.
C 091 A
C 091 D
Colored back-shells thermoplast.
C 091 A
C 091 B
17
13,5
for female cable connectors
C 091 00V000 120 2
L = 85 mm
for female receptacles
C 091 00V000 130 2
L = 60 mm
C 091 00V000 131 2
L = 100 mm
T1336 060 9
Colour
blue
red
yellow
green
44
for male receptacles
C 091 00U000 130 2
L = 60 mm
Flachd
C 091 00U000 131 2
L = 100 mm
C 091 A
C 091 D
8
Protective cover
for female cable connectors
and female receptacles,
brass nickel plated.
14
for Series
10,5
Description
Pieces
10
100
10
100
10
100
10
100
Part Number
T 2993 510 9X
T 2993 510 9C
T 2993 511 9X
T 2993 511 9C
T 2993 512 9X
T 2993 512 9C
T 2993 513 9X
T 2993 513 9C
Amphenol
C 091
The following current derating curves refer to the stated numbers of contacts and wire gauges,
when all contacts are simultaneously loaded with the same current.
The maximum ambient teperature for the series C091 is 100°C.
Current-Derating-Curves
acc. DIN IEC 60512
No of contacts 3
A
14,0
A
12,0
B
C
Current carrying
10,0
A
B
wire gauge 1,0 mm2
wire gauge 0,75 mm2
C
wire gauge 0,5 mm2
8,0
6,0
4,0
2,0
0,0
0
20
40
60
80
100
120 °C
Ambient temperature [°C]
A
No of contacts 5
12,0
10,0
A
Current carrying
B
A
wire gauge 0,75 mm2
B
wire gauge 0,5 mm2
80
100
8,0
6,0
4,0
2,0
0,0
0
20
40
60
120
°C
Ambient temperature [°C]
A
No of contacts 8
12,0
Current carrying
10,0
A
A
B
wire gauge 0,75 mm2
wire gauge 0,5 mm2
B
C
wire gauge 0,09 mm2
8,0
6,0
4,0
C
2,0
0,0
0
20
40
60
80
100
120 °C
Ambient temperature [°C]
Amphenol
453
C 091
Remarks
Safety classification
1. General Remarks
These connectors are designed and produced in conformity with the low voltage directive (73/23/EWG) respectively Gerätesicherheitsgesetz (German law)
and are especially in accordance with the standards DIN EN 61984 (VDE 0627); IEC 60664-1 (VDE 0110-1) and IEC 60529.
The connectors may be used only within the technical ratings.
All technical data refer to mated connectors under live conditions. The safety of the connector system depends on the correct selection of products, proper
assembly of the connector device, and a precise fit of the connectors.
2. Application Remarks
Connectors with / without breaking capacity must be used according to specified technical ratings.
The technical data represent the initial value of mated parts under predetermined conditions and length of time.These values could change with different
test parameters or product requirements.
The C 091 Series connectors are used in a wide variety of industries and equipment. Some of these include industrial machines and controls, data
processing, instrumentation and test equipment, medical devices, telecommunication’s network and equipment, plus outdoor and marine applications.
All rated data for the connectors listed in this catalog are based on over-voltage category and pollution degree for electronic applications. Connectors were
completely mated according to their respective safety locking mechanism. Selection and testing of connectors with / without breaking capacity to
meet specific product or industrial requirements such as rated voltage and the related clearances and creepage distances are the responsibility of the user.
3. Assembling Remarks
Certain appliances and equipment include protective measures that relate to the coupling devices of the male and female receptacle housings.
(see also DIN VDE 0100 part 410; IEC 60364-4-41).
Care must be taken to insure the parts are correctly mated and screws are tightened with the proper torque. Protection against electrical shock on the
termination side of the connector (receptacles, contact insert) shall be secured by suitable mounting.
4. Termination Remarks
The dimensions as stated in the assembly instructions are for general information only and can vary depending on cable styles and types.
Please note in the case of an internal strain relief: Always clamp the outer cable mantle (not the individual lead wires) to avoid damage of the lead wire
insulation. In case of shielded cables, fold the braid over the outer mantle to avoid damage of the lead wire insulation when clamping the braid.
In case of clamping rings, make sure that the lead wire insulation is not damaged when connecting (clamping) the braid.
Cable connectors are effectively secured when using the internal cable clamp. When the connector contains a simple gland bushing for retention the cable
should have a strain relief close behind the connector. All cable properties or specifications must be compatible with the connector design and materials.
Designated wire conductors must be terminated to the correct poles in the connector. Please make sure that the usability of the cable in conjunction with
the clamping ring is given.
Crimp contacts must be fully inserted into the plastic housing and retention assured with a slight tug on the wire.
Wire should be stripped correctly according to printed specifications to ensure no electrical contact can be made between the conductors. There should be
no nicked or cut strains during the stripping action.
1)
46
X
X
X
X1)
X1)
X1)
Connetor with
breaking capacity 1)
X
hand back safety
mated
X
finger safety
unmated
X
X1)
Male panel connector
Female panel connector
X
Cable clamp
rewirable
X
finger safety
mated
Female cable connector
X
cable clamp
Male cable connector
unenclosed
enclosed
Style
protective
earthing contact
5. Classification according to DIN EN 61984 / IEC 61984 (VDE 0627)
with
X
X
X
X
without
X
X
X
X
Protection against electrical shock on the termination side has to be secured by proper mounting.
Amphenol
C 091
IP Codes
(Ingress Protection)
Degree of protection
Electrical devices to which connectors belong have to be protected for safety reasons from outside influences like dust, foreign objects, direct contact, moisture
and water. This protection is provided on industrial connectors by their housings with their latching devices and sealed cable entries.
The degree of protection can be selected depending on the type of intended use. The standard IEC 60529 and/or DIN EN 60529 has specified the degree of
protection and divided into several classes.
The degree of protection is indicated in the following way:
IP 65
Code letters
(Ingress Protection)
1st charact. numeral (degree of protection against access
to hazardous parts and against solid foreign objects)
2nd charact. numeral (degree of protection against ingress of water)
The following charts give an overview about all protection degrees.
1st charact. Brief description
numeral
Definition
0
Non-protected
–
1
Protected against access to
hazardous parts with the
back of a hand. Protected
against solid foreign objects
of ≥50mm Ø.
Protected against access to
hazardous parts with a
finger.
Protected against solid
foreign objects of
≥12.5mm Ø.
The probe, sphere of 50mm
Ø, shall not fully penetrate
and shall have adequate
clearance from hazardous
parts.
The jointed test finger of
12mm Ø, 80mm length,
shall have adequate clearance
from hazardous parts. The
probe, sphere of 12.5mm Ø,
shall not fully penetrate.
The probe of 2.5mm Ø shall
not penetrate at all.
2
3
4
5
6
Protected against access
to hazardous parts with a
tool. Protected against solid
foreign objects of ≥2.5mm
Ø.
Protected against access to The probe of 1mm Ø shall
not penetrate at all.
hazardous parts with a
wire.Protected against solid
foreign objects of ≥1mm Ø.
Protected against access to The probe of 1mm Ø shall
hazardous parts with a wire. not penetrate.
Dust-protected.
Intrusion of dust is not
totally prevented, but dust
shall not penetrate in a
quantity to interfere with
satisfactory operation of
the device or to impair
safety.
Protected against access to The probe of 1mm Ø shall
hazardous parts with a wire. not penetrate.
No intrussion of dust.
Dust-tight.
2nd charact. Brief description
numeral
Definition
0
Non-protected
–
1
Protected against vertically
falling water drops
Protected against vertically
falling water drops when
enclosure tilted up to 15°
Vertically falling drops shall
have no harmful effects.
3
Protected against spraying
water
4
Protected against splashing
water
5
Protected against water jets
6
Protected against powerful
water jets
7
Protected against the effects
of temporary immersion in
water
8
Protected against the effects
of continous immersion in
water
9 K 1)
Protected against water
during high pressure/steam
jet cleaning
Water sprayed at an angle up
to 60° on either side of the
vertical shall have no harmful
effects.
Water splashed against the
enclosure from any direction
shall have no harmful effects.
Water projected in jets against
the enclosure from any
direction shall have no harmful
effects.
Water projected in powerful
jets against the enclosure
from any direction shall have
no harmful effects.
Intrusion of water in quantities
causing harmful effects shall
not be possible when the
enclosure is temporally
immersed in water for 30 min.
in 1m depth.
Intrusion of water in quantities
causing harmful effects shall
not be possible when the
enclosure is continuously
immersed in water under
conditions which shall be
agreed between manufacturer
and user but which are more
severe than for numeral 7.
Water projected in powerful
jets with high pressure against
the enclosure from any
direction shall have no harmful
effects.
2
Vertically falling drops shall
have no harmful effects when
the enclosure is tilted at any
angle up to 15° on either side
of the vertical.
1) Remark: Numeral acc. to DIN 40050 part 9, vehicles IP code
Amphenol
47
C 091
Summary of Part Numbers
Part Number
C091 11C003 000 2
C091 11C004 000 2
C091 11C005 000 2
C091 11C006 000 2
C091 11C007 000 2
C091 11C008 000 2
C091 11C105 000 2
C091 11C107 000 2
C091 11D003 000 2
C091 11D003 001 2
C091 11D004 000 2
C091 11D004 001 2
C091 11D005 000 2
C091 11D005 001 2
C091 11D006 000 2
C091 11D006 001 2
C091 11D007 000 2
C091 11D007 001 2
C091 11D008 000 2
C091 11D008 001 2
C091 11D105 000 2
C091 11D105 001 2
C091 11D107 000 2
C091 11D107 001 2
C091 11F003 000 2
C091 11F003 001 2
C091 11F004 000 2
C091 11F004 001 2
C091 11F005 000 2
C091 11F005 001 2
C091 11F006 000 2
C091 11F006 001 2
C091 11F007 000 2
C091 11F007 001 2
C091 11F008 000 2
C091 11F008 001 2
C091 11F105 000 2
C091 11F105 001 2
C091 11F107 000 2
C091 11F107 001 2
C091 11G003 000 2
C091 11G004 000 2
C091 11G005 000 2
C091 11G006 000 2
C091 11G007 000 2
C091 11G008 000 2
C091 11G105 000 2
C091 11G107 000 2
C091 11H003 000 2
C091 11H003 001 2
C091 11H004 000 2
C091 11H004 001 2
C091 11H005 000 2
C091 11H005 001 2
C091 11H006 000 2
C091 11H006 001 2
C091 11H007 000 2
C091 11H007 001 2
C091 11H008 000 2
C091 11H008 001 2
C091 11H105 000 2
C091 11H105 001 2
C091 11H107 000 2
C091 11H107 001 2
C091 11K003 000 2
C091 11K003 001 2
C091 11K004 000 2
C091 11K004 001 2
C091 11K005 000 2
C091 11K005 001 2
C091 11K006 000 2
C091 11K006 001 2
48
Page Part Number
42
42
42
42
42
42
42
42
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
40
40
40
40
40
40
40
40
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
37
37
37
37
37
37
37
37
C091 11K007 000 2
C091 11K007 001 2
C091 11K008 000 2
C091 11K008 001 2
C091 11K105 000 2
C091 11K105 001 2
C091 11K107 000 2
C091 11K107 001 2
C091 11N003 000 2
C091 11N004 000 2
C091 11N005 000 2
C091 11N006 000 2
C091 11N007 000 2
C091 11N008 000 2
C091 11N105 000 2
C091 11N107 000 2
C091 11S003 000 2
C091 11S005 000 2
C091 11S007 000 2
C091 11S107 000 2
C091 11T005 000 2
C091 11T007 000 2
C091 11T107 000 2
C091 11W003 000 2
C091 11W004 000 2
C091 11W005 000 2
C091 11W006 000 2
C091 11W007 000 2
C091 11W008 000 2
C091 11W105 000 2
C091 11W107 000 2
C091 31C003 100 2
C091 31C003 200 2
C091 31C004 100 2
C091 31C004 200 2
C091 31C005 100 2
C091 31C005 200 2
C091 31C006 100 2
C091 31C006 200 2
C091 31C007 100 2
C091 31C007 200 2
C091 31C008 100 2
C091 31C008 200 2
C091 31C012 100 2
C091 31C012 200 2
C091 31C014 100 2
C091 31C014 200 2
C091 31C105 100 2
C091 31C105 200 2
C091 31C107 100 2
C091 31C107 200 2
C091 31D003 100 2
C091 31D003 101 2
C091 31D004 100 2
C091 31D004 101 2
C091 31D005 100 2
C091 31D005 101 2
C091 31D005 200 2
C091 31D006 100 2
C091 31D006 101 2
C091 31D006 200 2
C091 31D007 100 2
C091 31D007 101 2
C091 31D007 201 2
C091 31D008 100 2
C091 31D008 101 2
C091 31D008 200 2
C091 31D008 201 2
C091 31D012 100 2
C091 31D012 200 2
C091 31D012 201 2
C091 31D014 100 2
Page Part Number
37
37
37
37
37
37
37
37
39
39
39
39
39
39
39
39
42
42
42
42
41
41
41
41
41
41
41
41
41
41
41
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
C091 31D014 200 2
C091 31D014 201 2
C091 31D105 100 2
C091 31D105 101 2
C091 31D107 100 2
C091 31D107 101 2
C091 31F003 100 2
C091 31F003 101 2
C091 31F004 100 2
C091 31F004 101 2
C091 31F005 100 2
C091 31F005 101 2
C091 31F006 100 2
C091 31F006 101 2
C091 31F007 100 2
C091 31F007 101 2
C091 31F008 100 2
C091 31F008 101 2
C091 31F012 100 2
C091 31F012 101 2
C091 31F014 100 2
C091 31F014 101 2
C091 31F105 100 2
C091 31F105 101 2
C091 31F107 100 2
C091 31F107 101 2
C091 31G003 100 2
C091 31G004 100 2
C091 31G004 200 2
C091 31G005 100 2
C091 31G005 200 2
C091 31G006 100 2
C091 31G007 100 2
C091 31G007 200 2
C091 31G008 100 2
C091 31G008 200 2
C091 31G012 100 2
C091 31G012 200 2
C091 31G014 100 2
C091 31G014 200 2
C091 31G105 100 2
C091 31G107 100 2
C091 31H003 100 2
C091 31H003 101 2
C091 31H004 100 2
C091 31H004 101 2
C091 31H005 100 2
C091 31H005 101 2
C091 31H005 200 2
C091 31H006 100 2
C091 31H006 101 2
C091 31H006 200 2
C091 31H007 100 2
C091 31H007 101 2
C091 31H007 201 2
C091 31H008 100 2
C091 31H008 101 2
C091 31H008 200 2
C091 31H008 201 2
C091 31H012 100 2
C091 31H012 200 2
C091 31H012 201 2
C091 31H014 100 2
C091 31H014 200 2
C091 31H014 201 2
C091 31H105 100 2
C091 31H105 101 2
C091 31H105 200 2
C091 31H107 100 2
C091 31H107 101 2
C091 31H107 200 2
C091 31K003 100 2
Page Part Number
36
36
36
36
36
36
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
37
C091 31K003 101 2
C091 31K004 100 2
C091 31K004 101 2
C091 31K005 100 2
C091 31K005 101 2
C091 31K006 100 2
C091 31K006 101 2
C091 31K007 100 2
C091 31K007 101 2
C091 31K008 100 2
C091 31K008 101 2
C091 31K012 100 2
C091 31K012 101 2
C091 31K014 100 2
C091 31K014 101 2
C091 31K105 100 2
C091 31K105 101 2
C091 31K107 100 2
C091 31K107 101 2
C091 31N003 100 2
C091 31N004 100 2
C091 31N005 100 2
C091 31N005 200 2
C091 31N006 100 2
C091 31N007 100 2
C091 31N008 100 2
C091 31N008 200 2
C091 31N012 100 2
C091 31N012 200 2
C091 31N014 100 2
C091 31N014 200 2
C091 31N105 100 2
C091 31N107 100 2
C091 31S003 100 2
C091 31S004 100 2
C091 31S005 100 2
C091 31S006 100 2
C091 31S006 200 2
C091 31S007 100 2
C091 31S008 100 2
C091 31S008 200 2
C091 31S012 100 2
C091 31S012 200 2
C091 31S014 100 2
C091 31S014 200 2
C091 31S105 100 2
C091 31S107 100 2
C091 31T003 100 2
C091 31T003 200 2
C091 31T004 100 2
C091 31T004 200 2
C091 31T005 100 2
C091 31T006 100 2
C091 31T006 200 2
C091 31T007 100 2
C091 31T007 200 2
C091 31T008 100 2
C091 31T012 100 2
C091 31T012 200 2
C091 31T014 100 2
C091 31T014 200 2
C091 31T105 100 2
C091 31T107 100 2
C091 31W003 100 2
C091 31W003 200 2
C091 31W004 100 2
C091 31W004 200 2
C091 31W005 100 2
C091 31W005 200 2
C091 31W006 100 2
C091 31W006 200 2
C091 31W007 100 2
Page Part Number
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
39
39
39
39
39
39
39
39
39
39
39
39
39
39
42
42
42
42
42
42
42
42
42
42
42
42
42
42
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
C091 31W007 200 2
C091 31W008 100 2
C091 31W008 200 2
C091 31W012 100 2
C091 31W012 200 2
C091 31W014 100 2
C091 31W014 200 2
C091 31W105 100 2
C091 31W105 200 2
C091 31W107 100 2
C091 31W107 200 2
C091 31 H012 101 2
C091 61G003 110 2
C091 61G003 120 2
C091 61G003 130 2
C091 61G004 110 2
C091 61G004 120 2
C091 61G004 130 2
C091 61G005 110 2
C091 61G005 120 2
C091 61G005 130 2
C091 61G006 110 2
C091 61G006 120 2
C091 61G006 130 2
C091 61G006 210 2
C091 61G007 110 2
C091 61G007 120 2
C091 61G007 130 2
C091 61G008 110 2
C091 61G008 120 2
C091 61G008 130 2
C091 61G012 110 2
C091 61G012 210 2
C091 61G014 110 2
C091 61G014 210 2
C091 61G105 110 2
C091 61G105 120 2
C091 61G105 130 2
C091 61G107 110 2
C091 61G107 120 2
C091 61G107 130 2
C091 61N003 110 2
C091 61N003 120 2
C091 61N003 130 2
C091 61N004 110 2
C091 61N004 120 2
C091 61N004 130 2
C091 61N005 110 2
C091 61N005 120 2
C091 61N005 130 2
C091 61N006 110 2
C091 61N006 120 2
C091 61N006 130 2
C091 61N007 110 2
C091 61N007 120 2
C091 61N007 130 2
C091 61N008 110 2
C091 61N008 120 2
C091 61N008 130 2
C091 61N012 210 2
C091 61N014 210 2
C091 61N105 110 2
C091 61N105 120 2
C091 61N105 130 2
C091 61N107 110 2
C091 61N107 120 2
C091 61N107 130 2
C 091 00U000 120 2
C 091 00U000 130 2
C 091 00U000 131 2
C 091 00V000 120 2
C 091 00V000 130 2
Page Part Number
41
41
41
41
41
41
41
41
41
41
41
35
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
44
44
44
44
44
C 091 00V000 131 2
FH 0300-091
HN01 015 0046 (1)
HN01 015 0046 (2)
HN01 015 0047 (1)
HN01 015 0047 (2)
HN01 015 0052 (1)
HN01 015 0052 (2)
HN02 015 0046 (1)
HN02 015 0046 (2)
HN02 015 0047 (1)
HN02 015 0047 (2)
HN02 015 0052 (1)
HN02 015 0052 (2)
N 45 091-000 1
T1336 060 9
TN01 015 0046 (1)
TN01 015 0046 (2)
TN01 015 0047 (1)
TN01 015 0047 (2)
TN01 015 0052 (1)
TN01 015 0052 (2)
TN02 015 0046 (1)
TN02 015 0046 (2)
TN02 015 0047 (1)
TN02 015 0047 (2)
TN02 015 0052 (1)
TN02 015 0052 (2)
T 2993 510 9C
T 2993 510 9X
T 2993 511 9C
T 2993 511 9X
T 2993 512 9C
T 2993 512 9X
T 2993 513 9C
T 2993 513 9X
T 3200 001
T 3200 002
T 3200 004
T 3200 005
T 3200 013
T 3200 018
T 3200 028
T 3200 048
T 3201 001
T 3201 002
T 3201 005
T 3201 013
T 3201 018
T 3201 028
T 3202 000
T 3202 009
T 3202 018
T 3202 100
T 3203 000
T 3203 009
T 3203 018
T 3203 100
T 3203 109
T 3203 400
T 3260 001
T 3260 002
T 3260 004
T 3260 005
T 3260 013
T 3260 018
T 3260 028
T 3260 048
T 3260 055
T 3260 058
T 3260 551
T 3260 552
Page
44
44
43
43
43
43
42
43
43
43
43
43
43
43
44
44
43
43
43
43
43
43
43
43
43
43
43
43
44
44
44
44
44
44
44
44
7
7
7
8
7
7
7
7
9
9
10
9
9
9
15
15
15
16
11
11
11
12
12
12
7
7
7
8
7
7
7
7
8
8
7
7
Amphenol
C 091
Summary of Part Numbers
Part Number
T 3260 554
T 3261 001
T 3261 002
T 3261 004
T 3261 005
T 3261 013
T 3261 018
T 3261 028
T 3261 048
T 3261 055
T 3261 058
T 3261 551
T 3261 552
T 3261 554
T 3262 000
T 3262 009
T 3262 018
T 3262 100
T 3262 150
T 3262 300
T 3262 400
T 3262 420
T 3262 430
T 3262 550
T 3263 000
T 3263 009
T 3263 018
T 3263 100
T 3263 109
T 3263 118
T 3263 150
T 3263 300
T 3263 320
T 3263 330
T 3263 400
T 3263 420
T 3263 430
T 3263 434
T 3263 550
T 3263 900
T 3271 500
T 3271 518
T 3271 550
T 3274 005
T 3274 055
T 3274 058
T 3274 501
T 3274 502
T 3274 504
T 3274 518
T 3274 528
T 3274 548
T 3274 551
T 3274 552
T 3274 554
T 3274 951
T 3274 991
T 3275 005
T 3275 055
T 3275 058
T 3275 501
T 3275 502
T 3275 504
T 3275 518
T 3275 528
T 3275 548
T 3275 551
T 3275 552
T 3275 554
T 3275 951
T 3275 991
T 3276 500
Amphenol
Page Part Number
7
9
9
9
10
9
9
9
9
10
10
9
9
9
15
15
15
16
16
15
16
16
16
15
11
11
11
12
12
12
12
11
11
11
12
12
12
12
11
14
30
30
30
21
21
21
21
21
21
21
21
21
21
21
21
29
29
25
25
25
25
25
25
25
25
25
25
25
25
29
29
32
T 3276 518
T 3276 550
T 3277 000
T 3277 018
T 3277 050
T 3277 100
T 3277 150
T 3277 500
T 3277 518
T 3277 550
T 3277 600
T 3277 900
T 3278 501
T 3278 502
T 3278 504
T 3278 518
T 3278 528
T 3278 548
T 3278 551
T 3278 552
T 3278 554
T 3278 951
T 3279 501
T 3279 502
T 3279 504
T 3279 518
T 3279 528
T 3279 548
T 3279 551
T 3279 552
T 3279 554
T 3300 001
T 3300 002
T 3300 004
T 3300 005
T 3300 013
T 3300 018
T 3300 028
T 3300 048
T 3300 055
T 3300 058
T 3300 551
T 3300 552
T 3300 554
T 3301 001
T 3301 002
T 3301 004
T 3301 005
T 3301 013
T 3301 018
T 3301 028
T 3301 048
T 3301 055
T 3301 058
T 3301 551
T 3301 552
T 3301 554
T 3302 000
T 3302 009
T 3302 018
T 3302 100
T 3302 150
T 3302 300
T 3302 400
T 3302 420
T 3302 430
T 3302 550
T 3303 000
T 3303 009
T 3303 018
T 3303 100
T 3303 109
Page Part Number
32
32
30
30
30
30
30
30
30
30
31
31
27
7
27
27
27
27
27
27
27
29
23
23
23
23
23
23
23
23
23
7
7
7
8
7
7
7
7
8
8
7
7
7
9
9
9
10
9
9
9
9
10
10
9
9
9
15
15
15
16
16
15
16
16
16
15
11
11
11
12
12
T 3303 118
T 3303 150
T 3303 300
T 3303 320
T 3303 330
T 3303 400
T 3303 420
T 3303 430
T 3303 434
T 3303 550
T 3321 500
T 3321 518
T 3321 550
T 3324 005
T 3324 055
T 3324 058
T 3324 501
T 3324 502
T 3324 504
T 3324 518
T 3324 528
T 3324 548
T 3324 551
T 3324 552
T 3324 554
T 3324 951
T 3324 991
T 3325 005
T 3325 055
T 3325 058
T 3325 501
T 3325 502
T 3325 504
T 3325 518
T 3325 528
T 3325 548
T 3325 551
T 3325 552
T 3325 554
T 3325 951
T 3325 991
T 3326 500
T 3326 518
T 3326 550
T 3327 000
T 3327 018
T 3327 050
T 3327 100
T 3327 150
T 3327 500
T 3327 518
T 3327 550
T 3328 501
T 3328 502
T 3328 504
T 3328 518
T 3328 528
T 3328 548
T 3328 551
T 3328 552
T 3328 554
T 3328 951
T 3328 991
T 3329 501
T 3329 502
T 3329 504
T 3329 518
T 3329 528
T 3329 548
T 3329 551
T 3329 552
T 3329 554
Page Part Number
12
12
11
11
11
12
12
12
12
11
30
30
30
21
21
21
21
21
21
21
21
21
21
21
21
29
29
25
25
25
25
25
25
25
25
25
25
25
25
29
29
32
32
32
30
30
30
30
30
30
30
30
27
27
27
27
27
27
27
27
27
29
29
23
23
23
23
23
23
23
23
23
T 3356 004
T 3356 005
T 3356 018
T 3356 028
T 3356 048
T 3356 055
T 3356 058
T 3356 551
T 3356 552
T 3356 554
T 3357 004
T 3357 005
T 3357 018
T 3357 028
T 3357 048
T 3357 055
T 3357 058
T 3357 551
T 3357 552
T 3357 554
T 3358 009
T 3358 018
T 3358 100
T 3358 150
T 3358 300
T 3358 400
T 3358 420
T 3358 430
T 3358 550
T 3359 009
T 3359 018
T 3359 100
T 3359 109
T 3359 118
T 3359 150
T 3359 300
T 3359 320
T 3359 330
T 3359 400
T 3359 420
T 3359 430
T 3359 550
T 3359 900
T 3360 001
T 3360 002
T 3360 004
T 3360 005
T 3360 010
T 3360 013
T 3360 018
T 3360 020
T 3360 028
T 3360 048
T 3360 055
T 3360 058
T 3360 130
T 3360 551
T 3360 552
T 3360 554
T 3361 001
T 3361 002
T 3361 004
T 3361 005
T 3361 010
T 3361 013
T 3361 018
T 3361 020
T 3361 028
T 3361 048
T 3361 055
T 3361 058
T 3361 130
Page Part Number
7
8
7
7
7
8
8
7
7
7
9
10
9
9
9
10
10
9
9
9
15
15
16
16
15
16
16
16
15
11
11
12
12
12
12
11
11
11
12
12
12
11
14
7
7
7
8
7
7
7
7
7
7
8
8
7
7
7
7
9
9
9
10
9
9
9
9
9
9
10
10
9
T 3361 551
T 3361 552
T 3361 554
T 3362 000
T 3362 009
T 3362 010
T 3362 018
T 3362 100
T 3362 150
T 3362 300
T 3362 400
T 3362 420
T 3362 430
T 3362 550
T 3363 ...
T 3363 000
T 3363 009
T 3363 010
T 3363 018
T 3363 100
T 3363 109
T 3363 118
T 3363 150
T 3363 300
T 3363 320
T 3363 330
T 3363 400
T 3363 404
T 3363 420
T 3363 430
T 3363 434
T 3363 550
T 3363 902
T 3371 500
T 3371 518
T 3371 550
T 3374 005
T 3374 058
T 3374 501
T 3374 502
T 3374 504
T 3374 518
T 3374 528
T 3374 548
T 3374 551
T 3374 552
T 3374 554
T 3374 951
T 3374 991
T 3375 005
T 3375 055
T 3375 058
T 3375 501
T 3375 502
T 3375 504
T 3375 518
T 3375 528
T 3375 548
T 3375 551
T 3375 552
T 3375 554
T 3375 951
T 3375 991
T 3376 500
T 3376 518
T 3376 550
T 3377 000
T 3377 018
T 3377 050
T 3377 100
T 3377 150
T 3377 500
Page Part Number
9
9
9
15
15
15
15
16
16
15
16
16
16
15
13
11
11
11
11
12
12
12
12
11
11
11
12
12
12
12
12
11
13
30
30
30
21
21
21
21
21
21
21
21
21
21
21
29
29
25
25
25
25
25
25
25
25
25
25
25
25
29
29
32
32
32
30
30
30
30
30
30
T 3377 518
T 3377 550
T 3377 600
T 3378 501
T 3378 502
T 3378 504
T 3378 518
T 3378 528
T 3378 548
T 3378 551
T 3378 552
T 3378 554
T 3378 951
T 3378 991
T 3379 501
T 3379 502
T 3379 504
T 3379 518
T 3379 528
T 3379 548
T 3379 551
T 3379 552
T 3379 554
T 3391 500
T 3391 518
T 3391 550
T 3394 005
T 3394 055
T 3394 058
T 3394 501
T 3394 502
T 3394 504
T 3394 518
T 3394 528
T 3394 548
T 3394 551
T 3394 552
T 3394 554
T 3394 991
T 3394 998
T 3395 005
T 3395 055
T 3395 058
T 3395 501
T 3395 502
T 3395 504
T 3395 518
T 3395 528
T 3395 548
T 3395 551
T 3395 552
T 3395 554
T 3396 500
T 3396 518
T 3396 550
T 3397 100
T 3397 150
T 3397 500
T 3397 518
T 3397 550
T 3397 600
T 3397 900
T 3398 501
T 3398 502
T 3398 504
T 3398 518
T 3398 528
T 3398 548
T 3398 551
T 3398 552
T 3398 554
T 3399 501
Page
30
30
31
27
27
27
27
27
27
27
27
27
29
29
23
23
23
23
23
23
23
23
23
30
30
30
21
21
21
21
21
21
21
21
21
21
21
21
29
29
25
25
25
25
25
25
25
25
25
25
25
25
32
32
32
30
30
30
30
30
31
31
27
27
27
27
27
27
27
27
27
23
49
C 091
Summary of Part Numbers
Part Number
T 3399 502
T 3399 504
T 3399 518
T 3399 528
T 3399 548
T 3399 551
T 3399 552
T 3399 554
T 3400 001
T 3400 002
T 3400 004
T 3400 005
T 3400 013
T 3400 018
T 3400 028
T 3400 038
T 3400 048
T 3400 055
T 3400 058
T 3400 551
T 3400 552
T 3400 554
T 3401 001
T 3401 002
T 3401 004
T 3401 005
T 3401 013
T 3401 018
T 3401 028
T 3401 048
T 3401 055
T 3401 058
T 3401 551
T 3401 552
T 3401 554
T 3402 000
T 3402 009
T 3402 018
T 3402 100
T 3402 150
T 3402 300
T 3402 400
T 3402 420
T 3402 430
T 3402 550
T 3403 ...
T 3403 000
T 3403 009
T 3403 018
T 3403 100
T 3403 109
T 3403 118
T 3403 150
T 3403 300
T 3403 320
T 3403 330
T 3403 400
T 3403 420
T 3403 430
T 3403 434
T 3403 550
T 3403 902
T 3421 500
T 3421 518
T 3421 550
T 3424 005
T 3424 055
T 3424 058
T 3424 501
T 3424 502
T 3424 504
T 3424 518
50
Page Part Number
23
23
23
23
23
23
23
23
7
7
7
8
7
7
7
7
7
8
8
7
7
7
9
9
9
10
9
9
9
9
10
10
9
9
9
15
15
15
16
16
15
16
16
16
15
13
11
11
11
12
12
12
12
11
11
11
12
12
12
12
11
13
30
30
30
21
21
21
21
21
21
21
T 3424 528
T 3424 548
T 3424 551
T 3424 552
T 3424 554
T 3424 951
T 3424 991
T 3424 998
T 3425 005
T 3425 055
T 3425 058
T 3425 501
T 3425 502
T 3425 504
T 3425 518
T 3425 528
T 3425 548
T 3425 551
T 3425 552
T 3425 554
T 3425 951
T 3425 991
T 3426 500
T 3426 518
T 3426 550
T 3427 000
T 3427 018
T 3427 050
T 3427 100
T 3427 150
T 3427 500
T 3427 518
T 3427 550
T 3427 600
T 3428 501
T 3428 502
T 3428 504
T 3428 518
T 3428 528
T 3428 548
T 3428 551
T 3428 552
T 3428 554
T 3428 951
T 3428 991
T 3429 501
T 3429 502
T 3429 504
T 3429 518
T 3429 528
T 3429 548
T 3429 551
T 3429 552
T 3429 554
T 3431 500
T 3431 518
T 3431 550
T 3434 005
T 3434 055
T 3434 058
T 3434 501
T 3434 502
T 3434 504
T 3434 518
T 3434 528
T 3434 548
T 3434 551
T 3434 552
T 3434 554
T 3434 951
T 3434 991
T 3435 005
Page Part Number
21
21
21
21
21
29
29
29
25
25
25
25
25
25
25
25
25
25
25
25
29
29
32
32
32
30
30
30
30
30
30
30
30
31
27
27
27
27
27
27
27
27
27
29
29
23
23
23
23
23
23
23
23
23
30
30
30
21
21
21
21
21
21
21
21
21
21
21
21
29
29
25
T 3435 055
T 3435 058
T 3435 501
T 3435 502
T 3435 504
T 3435 518
T 3435 528
T 3435 548
T 3435 551
T 3435 552
T 3435 554
T 3435 951
T 3435 991
T 3436 500
T 3436 518
T 3436 550
T 3437 000
T 3437 018
T 3437 050
T 3437 100
T 3437 150
T 3437 500
T 3437 518
T 3437 550
T 3438 501
T 3438 502
T 3438 504
T 3438 518
T 3438 528
T 3438 548
T 3438 551
T 3438 552
T 3438 554
T 3438 951
T 3438 991
T 3439 501
T 3439 502
T 3439 504
T 3439 518
T 3439 528
T 3439 548
T 3439 551
T 3439 552
T 3439 554
T 3441 500
T 3441 518
T 3441 550
T 3444 005
T 3444 055
T 3444 058
T 3444 501
T 3444 502
T 3444 504
T 3444 518
T 3444 528
T 3444 548
T 3444 551
T 3444 552
T 3444 554
T 3445 005
T 3445 055
T 3445 058
T 3445 501
T 3445 502
T 3445 504
T 3445 518
T 3445 528
T 3445 548
T 3445 551
T 3445 552
T 3445 554
T 3446 500
Page Part Number
25
25
25
25
25
25
25
25
25
25
25
29
29
32
32
32
30
30
30
30
30
30
30
30
27
27
27
27
27
27
27
27
27
29
29
23
23
23
23
23
23
23
23
23
30
30
30
21
21
21
21
21
21
21
21
21
21
21
21
25
25
25
25
25
25
25
25
25
25
25
25
32
T 3446 518
T 3446 550
T 3447 100
T 3447 150
T 3447 500
T 3447 518
T 3447 550
T 3447 900
T 3448 501
T 3448 502
T 3448 504
T 3448 518
T 3448 528
T 3448 548
T 3448 551
T 3448 552
T 3448 554
T 3449 501
T 3449 502
T 3449 504
T 3449 518
T 3449 528
T 3449 548
T 3449 551
T 3449 552
T 3449 554
T 3475 001
T 3475 002
T 3475 004
T 3475 005
T 3475 013
T 3475 018
T 3475 028
T 3475 038
T 3475 048
T 3475 055
T 3475 058
T 3475 551
T 3475 552
T 3475 554
T 3476 001
T 3476 002
T 3476 004
T 3476 005
T 3476 013
T 3476 018
T 3476 028
T 3476 038
T 3476 048
T 3476 055
T 3476 058
T 3476 551
T 3476 552
T 3476 554
T 3477 000
T 3477 009
T 3477 018
T 3477 100
T 3477 150
T 3477 300
T 3477 400
T 3477 420
T 3477 430
T 3477 550
T 3478 000
T 3478 009
T 3478 018
T 3478 100
T 3478 109
T 3478 118
T 3478 150
T 3478 300
Page Part Number
32
32
30
30
30
30
30
31
27
27
27
27
27
27
27
27
27
23
23
23
23
23
23
23
23
23
7
7
7
8
7
7
7
7
7
8
8
7
7
7
9
9
9
10
9
9
9
9
9
10
10
9
9
9
15
15
15
16
16
15
16
16
16
15
11
11
11
12
12
12
12
11
T 3478 320
T 3478 330
T 3478 400
T 3478 404
T 3478 420
T 3478 430
T 3478 434
T 3478 550
T 3484 001
T 3484 002
T 3484 004
T 3484 005
T 3484 013
T 3484 018
T 3484 028
T 3484 048
T 3484 055
T 3484 058
T 3484 551
T 3484 552
T 3484 554
T 3485 001
T 3485 002
T 3485 004
T 3485 005
T 3485 013
T 3485 018
T 3485 028
T 3485 048
T 3485 055
T 3485 058
T 3485 551
T 3485 552
T 3485 554
T 3486 000
T 3486 009
T 3486 018
T 3486 100
T 3486 150
T 3486 300
T 3486 400
T 3486 420
T 3486 430
T 3486 550
T 3487 000
T 3487 009
T 3487 018
T 3487 100
T 3487 109
T 3487 118
T 3487 150
T 3487 300
T 3487 320
T 3487 330
T 3487 400
T 3487 420
T 3487 430
T 3487 550
T 3487 900
T 3504 001
T 3504 002
T 3504 004
T 3504 005
T 3504 013
T 3504 018
T 3504 028
T 3504 048
T 3504 055
T 3504 058
T 3504 551
T 3504 552
T 3504 554
Page Part Number
11
11
12
12
12
12
12
11
7
7
7
8
7
7
7
7
8
8
7
7
7
9
9
9
10
9
9
9
9
10
10
9
9
9
15
15
15
16
16
15
16
16
16
15
11
11
11
12
12
12
12
11
11
11
12
12
12
11
14
7
7
7
8
7
7
7
7
8
8
7
7
7
T 3505 001
T 3505 002
T 3505 004
T 3505 005
T 3505 013
T 3505 018
T 3505 028
T 3505 048
T 3505 055
T 3505 058
T 3505 551
T 3505 552
T 3505 554
T 3506 000
T 3506 009
T 3506 018
T 3506 100
T 3506 150
T 3506 300
T 3506 400
T 3506 420
T 3506 430
T 3506 550
T 3507 000
T 3507 009
T 3507 018
T 3507 100
T 3507 109
T 3507 118
T 3507 150
T 3507 300
T 3507 320
T 3507 330
T 3507 400
T 3507 404
T 3507 420
T 3507 430
T 3507 550
T 3507 900
T 3521 500
T 3521 518
T 3521 550
T 3524 055
T 3524 058
T 3524 501
T 3524 502
T 3524 504
T 3524 518
T 3524 528
T 3524 548
T 3524 551
T 3524 552
T 3524 554
T 3524 951
T 3525 055
T 3525 058
T 3525 501
T 3525 502
T 3525 504
T 3525 518
T 3525 528
T 3525 548
T 3525 551
T 3525 552
T 3525 554
T 3526 500
T 3526 518
T 3526 550
T 3527 100
T 3527 150
T 3527 500
T 3527 518
Page
9
9
9
10
9
9
9
9
10
10
9
9
9
15
15
15
16
16
15
16
16
16
15
11
11
11
12
12
12
12
11
11
11
12
12
12
12
11
14
30
30
30
21
21
21
21
21
21
21
21
21
21
21
29
25
25
25
25
25
25
25
25
25
25
25
32
32
32
30
30
30
30
Amphenol
C 091
Summary of Part Numbers
Part Number
T 3527 900
T 3528 501
T 3528 502
T 3528 504
T 3528 518
T 3528 528
T 3528 548
T 3528 551
T 3528 552
T 3528 554
T 3529 501
T 3529 502
T 3529 504
T 3529 518
T 3529 528
T 3529 548
T 3529 551
T 3529 552
T 3529 554
T 3621 500
T 3621 518
T 3624 005
T 3624 058
T 3624 501
T 3624 502
T 3624 504
T 3624 518
T 3624 528
T 3624 548
T 3625 005
T 3625 058
T 3625 501
T 3625 502
T 3625 504
T 3625 518
T 3625 528
T 3625 548
T 3626 500
T 3626 518
T 3627 100
T 3627 500
T 3627 518
T 3628 501
T 3628 502
T 3628 504
T 3628 518
T 3628 528
T 3628 548
T 3629 501
T 3629 502
T 3629 504
T 3629 518
T 3629 528
T 3629 548
T 3635 000
T 3635 001
T 3635 002
T 3635 004
T 3635 005
T 3635 058
T 3636 000
T 3636 001
T 3636 002
T 3636 004
T 3636 005
T 3636 058
T 3637 000
T 3637 001
T 3637 009
T 3637 100
T 3637 304
T 3637 404
Amphenol
Page Part Number
31
27
27
27
27
27
27
27
27
27
23
23
23
23
23
23
23
23
23
30
30
21
21
21
21
21
21
21
21
25
25
25
25
25
25
25
25
32
32
30
30
30
27
27
27
27
27
27
23
23
23
23
23
23
7
7
7
7
8
8
9
9
9
9
10
10
15
15
15
16
15
16
T 3638 000
T 3638 004
T 3638 009
T 3638 100
T 3638 109
T 3638 118
T 3638 304
T 3638 404
T 3641 500
T 3641 518
T 3644 005
T 3644 058
T 3644 501
T 3644 502
T 3644 504
T 3644 518
T 3644 528
T 3644 548
T 3645 005
T 3645 058
T 3645 501
T 3645 502
T 3645 504
T 3645 518
T 3645 528
T 3645 548
T 3646 500
T 3646 518
T 3647 100
T 3647 500
T 3647 518
T 3648 501
T 3648 502
T 3648 504
T 3648 518
T 3648 528
T 3648 548
T 3649 501
T 3649 502
T 3649 504
T 3649 518
T 3649 528
T 3649 548
T 3650 000
T 3650 001
T 3650 002
T 3650 004
T 3650 005
T 3650 058
T 3651 000
T 3651 001
T 3651 002
T 3651 004
T 3651 005
T 3651 058
T 3652 000
T 3652 001
T 3652 009
T 3652 100
T 3652 304
T 3652 404
T 3653 000
T 3653 004
T 3653 009
T 3653 100
T 3653 109
T 3653 118
T 3653 304
T 3653 404
VN01 015 0046 (1)
VN01 015 0046 (2)
VN01 015 0047 (1)
Page Part Number
11
11
11
12
12
12
11
12
30
30
21
21
21
21
21
21
21
21
25
25
25
25
25
25
25
25
32
32
30
30
30
27
27
27
27
27
27
23
23
23
23
23
23
7
7
7
7
8
8
9
9
9
9
10
10
15
15
15
16
15
16
11
11
11
12
12
12
11
12
43
43
43
VN01 015 0047 (2)
VN01 015 0052 (1)
VN01 015 0052 (2)
VN02 015 0046 (1)
VN02 015 0046 (2)
VN02 015 0047 (1)
VN02 015 0047 (2)
VN02 015 0052 (1)
VN02 015 0052 (2)
ZN01 015 0046 (1)
ZN01 015 0046 (2)
ZN01 015 0047 (1)
ZN01 015 0047 (2)
ZN01 015 0052 (1)
ZN01 015 0052 (2)
ZN02 015 0046 (1)
ZN02 015 0046 (2)
ZN02 015 0047 (1)
ZN02 015 0047 (2)
ZN02 015 0052 (1)
ZN02 015 0052 (2)
Page Part Number
Page Part Number
Page Part Number
Page
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
51
Argentina
Amphenol Argentina
Av. Callao 930
2nd Floor Office B “Plaza“
C 1023 AAP Buenos Aires
Phone +54 11 4815 68 86
www.amphenol.com.ar
Australia
Amphenol Australia Pty. Ltd.
2 Fiveways Blvd
Keysborough
Victoria 31 73
Phone +61 3 8796 8888
www.amphenol.com.au
Brazil
Amphenol do Brasil Ltda.
Rua Diogo Moreira 132, 20th Floor
CEP 05423-101 Sao Paulo SP
Phone +55 11 3815 1003
www.amphenol.com.br
China
Amphenol-Tuchel Electronics
China Branch
20 Tianshan Road
Changzhou 213022
Phone +86 0519 5110301
www.amphenol.info
France
Amphenol Socapex S.A.S.
948, Promenade de l‘Arve, BP 29
Thyez Cedex, 74311
Phone +33 4 5089 2800
www.amphenol-socapex.com
Germany
Amphenol-Tuchel Electronics GmbH
August-Haeusser-Str. 10
74080 Heilbronn
Phone +49 7131 929-0
www.amphenol.de
India
Amphenol Interconnect India Pvt Ltd
105, Bhosari Industrial Area
Pune – 411 026
Phone +91 20 27120481
www.amphenol-in.com
Italy
Amphenol-Tuchel Italy
Via Barbaiana n. 5
20020 Lainate (MI)
Phone +39 02 932 541
www.amphenol.info
Korea
Amphenol DaeShin Elect and
Precision Co.,Ltd
558 Songnae-Dong, Sosa-Gu
Bucheon-City, Kyunggi-Do
Korea 422-130
Phone +82 32 610 3800
www.amphenol.co.kr
Mexico
Amphenol Mexico
Prolongacion Reforma 61 - 6 B2
Col. Paseo de las Lomas
C.P. 01330 Mexico D.F.
Phone +52 55 5258 9984
www.amphenolmexico.com
Singapore
Asia Pacific Sales Operations
72 Bendemeer Rd, No.03-32/33
Hiap Huat House, Luzerne, 339941
Singapore
Phone +65 6294 2128
www.amphenol.com
South Africa
Amphenol International Ltd
Chislehurston
30 Impala Road
2196 Chislehurston
Sandton, 2146
Phone +27 11 7839517
www.amphenol.co.za
Taiwan
Amphenol East Asia Limited-Taiwan
5F, No 361, Fusing 1st Rd
Gueishan Township,
Taoyuan County 333
Phone +886 3 2647 200
www.amphenol.com
Turkey
Amphenol Turkey
Sun Plaza Kat: 15
Maslak Mah. Bilim Sok.No:15
34398 Sisli - Istanbul
Phone: +90 212 367 9220
www.amphenol.com.tr
United Kingdom
Amphenol Limited
Thanet Way,Whitstable
Kent, CT53JF
Phone +44 1227 773 200
www.amphenol.co.uk
USA
Amphenol-Tuchel Electronics
6900 Haggerty Road
Suite 200
Canton, Michigan 48187
Phone +1 734 4516400
www.amphenol.info
Amphenol Corporation
Corporate Headquarters
358 Hall Avenue
Wallingford, CT 06492
Phone +1 877 267 4366
Phone +1 2 03 2 65 89 00
www.amphenol.com
Spain
Amphenol Espana
Edificio Burgosol, Oficina 55
C/Comunidad de Madrid, 35 bis
Las Rozas (Madrid), 28230
Phone +34 91 64 07302
www.amphenol.com
More Amphenol companies can be found here: www.amphenol.com
Important Notice
All technical data have been measured in a laboratory environment and can be different during practical usage of the product. Any product information is for descriptive
usage only and not legally binding; particularly the information does not constitute or provide any legal guaranties (“Beschaffenheitsgarantie” or “Haltbarkeitsgarantie”).
We reserve the right to change the design due to improvement in quality, development or production requirements.
This catalogue must not be used in any form or manner without our prior approval in writing (Copyright Law, Fair Trading Law, Civil Code).
Your engineering sales representative:
Amphenol
Amphenol-Tuchel Electronics GmbH
August-Häusser- Str. 10 . D-74080 Heilbronn . Germany . Phone +49(0)7131 929-0 . Fax +49(0)7131 929-486 · www.amphenol.info
ATE 3040 E 1107 / 800 0811 Printed on chlorin-free bleached paper, specifications may be changed without notice. Copyright by Amphenol-Tuchel Electronics GmbH, Germany
International