PRELIMINARY DATA SHEET NECʼs 1310 nm InGaAsP MQW FP LASER DIODE IN CAN PACKAGE NX5310 SERIES FOR 155 Mb/s, 622 Mb/s, 1.25 Gb/s AND FTTH APPLICATIONS FEATURES DESCRIPTION • OPTICAL OUTPUT POWER: Po = 5.0 mW NECʼs NX5310 Series is a 1310 nm Multiple Quantum Well • LOW THRESHOLD CURRENT : Ith = 6 mA monitor PIN-PD. These devices are designed for application • DIFFERENTIAL EFFICIENCY: ηd =0.3 W/A (MQW) structured Fabry-Perot (FP) laser diode with InGaAs up to 1.25 Gb/s. • WIDE OPERATING TEMPERATURE RANGE: TC = -40 to +85°C • InGaAs MONITOR PIN-PD • CAN PACKAGE: ø5.6 mm APPLICATIONS • FIBER COUPLING POINT: 5.8 mm • STM-1 (I-1, S-1.1), STM-4 (I-4, S-4.1), ITU-T recommendations • FTTH P2P (Fiber To The Home Point to Point) system California Eastern Laboratories NX5310 SERIES PACKAGE DIMENSIONS (Units in mm) BOTTOM VIEW 1 110º±2º 2 4 3 0.3+0.1 -0.0 Focal Point 3.10 5.80 typ φ 1.5 ∆x = ±300 µm ∆y = ±300 µm PIN CONNECTIONS NX5310EH LD 2 4– φ 0.45 φ 2.0 NX5310EK 1 (Case) 1 (Case) Reference Plane 15.0±1.0 1.2±0.1 3.90±0.2 1.0±0.1 0.3+0.1 ñ0.0 φ 5.6+0.00 -0.03 φ 4.2±0.1 φ 3.55±0.1 PD 3 4 LD 2 4 PD 3 NX5310 SERIES ORDERING INFORMATION PART NUMBER NX5310EH-AZ* PACKAGE PIN CONNECTIONS 4-pin CAN with ball lens cap 1 LD 2 PD NX5310EK-AZ* 4 3 1 LD 2 4 PD 3 Remarks The hermetic test will be performed as AQL 1.0%. *NOTE: Please refer to the last page of this data sheet, “Compliance with EU Directives” for Pb-Free RoHS Compliance Infomation. NX5310 SERIES ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL RATINGS UNIT Optical Output Power Po 10 mW Forward Current of LD IF 150 mA Reverse Voltage of LD VR 2.0 V Forward Current of PD IF 10 mA Reverse Voltage of PD VR 20 V Operating Case Temperature TC −40 to +85 °C Storage Temperature Tstg −40 to +85 °C Assembly Temperature Tasb 150 (15 Hr) °C Lead Soldering Temperature Tsld 350 (3 sec.) °C Relative Humidity (noncondensing) RH 85 % ELECTRO-OPTICAL CHARACTERISTICS PARAMETER (TC = 25°C, unless otherwise specified) SYMBOL CONDITIONS TYP. MAX. UNIT 1.1 1.5 V 10 20 35 mA Ith 3 6 15 mA Differential Efficiency ηd 0.2 0.3 0.7 W/A Center Wavelength λC Po = 5.0 mW, RMS (−20 dB) 1 290 1 310 1 330 nm Spectral Width σ Po = 5.0 mW, RMS (−20 dB) 1.0 2.0 nm Rise Time tr 10-90% 0.15 0.3 ns Fall Time tf 90-10% 0.15 0.3 ns Lateral Beam Angle θ// Po = 5.0 mW 11 deg. Vertical Beam Angle θ⊥ Po = 5.0 mW 11 deg. Monitor Current Im VR = 1.5 V, Po = 5.0 mW Monitor Dark Current ID Monitor PD Terminal Capacitance Operating Voltage Vop Po = 5.0 mW Operating Current Iop Po = 5.0 mW Threshold Current MIN. 100 500 900 μA VR = 10 V 100 nA Ct VR = 10 V, f = 1 MHz 20 pF Focal Distance Df Po = 5.0 mW 5.0 5.8 6.2 mm Optical Output Power from Fiber Pf Po = 5.0 mW, 8 degree angled fiber, Optimized X, Y, θ. Z = 5.8 ± 0.05 mm. 400 800 μW Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. 09/27/04 A Business Partner of NEC Compound Semiconductor Devices, Ltd. 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.