Fujitsu FTR-P3CN009W1-05 Compact power relay 1 pole-25 a for automotive application Datasheet

FTR-P3 SERIES
COMPACT POWER RELAY
1 POLE—25 A FOR AUTOMOTIVE APPLICATIONS
FTR-P3 Series
RoHS compliant
n FEATURES
Compact for high density packaging.
(65% volume of previous generation FBR 51/52 Series).
l High contact capacity with proven contact material.
(100,000 operations, 14 V, 25 A achieved, even with reduced size).
l 125˚C version is available.
l Surface mount compatible version (reflowable) is available.
l Coil power savings
(600mW nominal achieved with state-of-the-art magnetic analysis/
design).
l Ease of PCB layout
(all terminals on perimeter, coil and contact terminals separated).
l Optional over-voltage circuit breaking capability
(0.6mm gap, contact our representative).
l Packaging for auto-insertion (tube packing, 30 relays/tube).
l
l
RoHS compliant since date code: 0630
Please see page 8 for more information
n ORDERING INFORMATION
[Example]
FTR-P3
(a)
C
(b)
N 012 W1 ***
(c) (d) (e) (f)
(a)
Series Name
FTR-P3 Series
(b)
Contact Arrangement
C
: 1 Form C
(c)
Contact Gap
N
P
: 0.3mm gap
: 0.6mm gap
(d)
Nominal Coil Voltage
009
010
012
: 09VDC
: 10VDC
: 12VDC
(e)
Contact Material
W1
: Silver-tin oxide-indium
(f)
Custom Designation
Nil : Standard (85˚C)
-01 : High temperature (125˚C)
-05 : High temperature (125˚C) and reflowable
-06 : High temperature (125˚C) and reflowable
Higher stand-off
Note: The part number stamped on the relay cover does not include "FTR".
Example: Ordering part number:
FTR-P3CN012W1
Stamped on part number: P3CN012W1 n
TYPICAL APPLICATIONS
Power window
Door lock
Sun roof
Power seat
Wiper/IWW
Tilt steering
Retractable antenna
FTR-P3 SERIES
n SPECIFICATIONS
Specification
Item
Contact
Coil
Timing
Values
Life
High temperature version
(-01, -05, -06)
Arrangement
1 form C (SPDT )
Material
Silver-tin oxide-indiu m
Contact path Voltage Drop (Initial)
Maximum 100 mV (at 1 A 12 VDC)
Rating
25 A at 14VDC (locked motor load)
Maximum Carry Current*1
25 A / 1hour (25° C, 100% rated coil voltage)
Maximum Switching Current (Reference)
35 A at 16 VD C
Minimum Switching Load*2 (Reference)
1 A, 6 VD C
Operating Ambient Temperature Range
-40° C to +85° C (no frost )
Storage Temperature Range
-40° C to+100° C (no frost ) -40° C to +125° C (no frost )
Operate (at nominal voltage)
Maximum 10ms (not including bounce)
Release (at nominal voltage)
Maximum 5ms (not including bounce, no diode)
Maximum 15ms (not including bounce, with diode)
Mechanical
10 x 1 06 operations minimum
Electrical
100 x 103 operations minimum, 14 VDC, 25 A (locked
motor load)
(1 operation = 1 forward and 1 reverse)
Vibration
Resistance
Other
Standard
Shock
Resistance
Operational
-40° C to +125° C (no frost )
10-55Hz, 1.5mm double amplitude (=9.13G @ 55Hz)
Operational
100 m/ s2 minimum (10G)
Withstand, no damage
1, 000 m/ s2 minimum (100G)
Insulation Resistance (initial)
100M ohms @500 VA C
Dielectric Withstanding Voltage (initial)
500 VA C
Weight
Approximately 5 g
*1 Need to consider the head from PCB when max. current is more than 10A.
*2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment.
The minimum switching load varies with the switching frequency and operating environment.
FTR-P3 SERIES
n COIL DATA CHART
FTR-P3 Series (0.25mm contact gap)
Coil
Resistance
(±10% at
20ºC)
Must
Release
Voltage
(at 20ºC)
Coil
Power at
Nominal
Voltage
Thermal
Resistance
(approx.)
Model
Nominal
Coiil
Voltage
FTR-P3CN009W1 ( )
9VD C
13 5 Ω
5.5VDC (at 20° C)
6.9VDC (at 85° C)
0.75VDC
0.6 W
73° C/ W
FTR-P3CN010W1 ( )
10VD C
16 7 Ω
6.3VDC (at 20° C)
7.9VDC (at 85° C)
0.9VDC
0.6 W
73° C/ W
FTR-P3CN012W1 ( )
12VD C
24 0 Ω
7.3VDC (at 20° C)
9.2VDC (at 85° C)
1.0VDC
0.6 W
73° C/ W
Must Operate
Voltage
Note: ( ) is "Nil", "-01", "05", or "-06"
FTR-P3 Series (0.6mm contact gap)
Model
Nominal
Coil
Voltage
Coil
Resistance
(±10% at 20°C)
Must Operate
Voltage
Must
Release
Voltage
(at 20°C)
Coil
Power at
Nominal
Voltage
Thermal
Resistance
(approx.)
FTR-P3-CP009W1
9VDC
100Ω
5.5VDC (at 20ºC)
6.9VDC (at 85ºC)
0.75VDC
0.8W
73ºC/W
FTR-P3-CP010W1
10VDC
125Ω
6.3VDC (at 20ºC)
7.9VDC (at 85ºC)
0.9VDC
0.8W
73ºC/W
FTR-P3-CP012W1
12VDC
167Ω
7.3VDC (at 20ºC)
9.2VDC (at 85ºC)
1.0VDC
0.8W
73ºC/W
n REFERENCE DATA
Operating/release voltage distribution
100
Data: FTR-P3
Units: n = 100
Operate
Release
Operate and release time distribution
Data: FTR-P3
Units: n = 100
Operate
Release
with diode
Distribution (%)
Distribution (%)
60
60
40
40
20
20
0
10
20 30 40 50 60
Ratio to rated voltage (%)
70
80
0
Contact resistance distribution
100
Data: FTR-P3
Units: n = 100
80
Distribution (%)
80
80
0
100
60
40
20
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7
Time (ms)
0
0
10
20
30
40
50
60
70
80
Contact resistance (m)
FTR-P3 SERIES
n CHARACTERISTIC DATA
1. LIFE TEST (EXAMPLES)
Percent of nominal coil voltage (%)
• Change of operate and release voltage
• Test item
14 V DC-25 A
100
locked motor
100K operations* minimim
80
0.25 seconds ON,
9.75 seconds OFF
OPERATE
RL-1
N.O.
N.C.
M
N.O.
N.C.
RL-2
40
20
RELEASE
0
20
50
• Change in contact resistance
10 sec
100
500
1000
Number of operations* (x 103 times)
Initial
• Current wave form
(RL-1)
25 A
60
(Measured at 6 VDC, 1A wet)
1000
0A
0.25 sec
0.25 sec
5 sec
Contact Resistance (mΩ)
0A
(RL-2)
25 A
* 1 operation = 1 forward
and 1 reverse
100
10
1
20
50
Initial
100
500
1000
100
500
1000
Number of operations* (x 103 times)
Percent of nominal coil voltage (%)
• Test item
• Change of operate and release voltage
14 V DC,
100
inrush current: 17A
motor free
80
300K operations minimum
0.25 seconds ON,
OPERATE
9.75 seconds OFF
60
RL
N.O.
N.C.
M
40
20
RELEASE
0
Initial
50
Number of operations (x 103 times)
• Change in contact resistance
• Current wave form
(Measured at 6 VDC, 1A wet)
1.5 A
12 A
Contact Resistance (mΩ)
1000
17 A
0A
20
100
10
1
Initial
20
50
100
500
Number of operations (x 103 times)
1000
FTR-P3 SERIES
2. MAXIMUM BREAK CAPACITY
3. COIL TEMPERATURE RISE
100
Switching current (A)
50
Coil temperature rise (degrees C)
Motor lock load
FTR-P3CN
P3CP
20
P3CN
10
5
2
100
60
14
16
20
25
0.6 W
Contact carry current: 10A
0.6 W
Contact carry current: 0.0A
40
20
0
12
0.6 W
Contact carry current: 20A
80
1
10
Ambient temperature: 20C
120
0
10
20
30
Applied time (minutes)
30
Source voltage (VDC)
4. OPERATING COIL VOLTAGE RANGE
Ratio of coil voltage to nominal voltage (%)
140
120
Continuous operating range
at 10A carry current
100
80
60
ate
-oper
Must
volta
ge
40
-40
-20
0
20
40
60
80
100
Ambient temperature C
FTR-P3 SERIES
5. VIBRATION RESISTANCE CHARACTERISTIC
Dual amplitude (mm)
5
Acceleration (m/s2)
100
50
1
0.5
0.1
0.01
Frequency : 10~2000 Hz
Acceleration : 100 m/s2 maximum
Vibration axis : see drawing below
Detection level : generation of 1 ms
or longer contact opening
Range where chattering occurs
44 m/s2
On-vehicle
Electronic equipment
Standard
Break contact
Coil deenergized
on X-axis
10
10
50
100
500
1000
Z
FTR-P3
2000
Y
X
Frequency (Hz)
6. SHOCK RESISTANCE CHARACTERISTIC
1,000
Shock duration : 111 ms, half-sine wave
Test condition: coil, energized and de-energized
Impact direction: see drawing below
Detection level : generation of 1ms or longer
contact opening
Y2
800
Shock level (m/s2)
600
400
: Break contact
(coil de-energized)
: Make contact
(coil energized)
200
0
X1
X2
Y1
Y2
Impact direction
Z1
Y1
Z2
FTR-P3
Z1
X1
X2
Z2
FTR-P3 SERIES
n DIMENSIONS AND SCHEMATICS
Dimensions (Nil, -01 and -05)
17.4 +0.5
-0.5
+0.5
2.5 0
+1.3
13.5+0.5
-0.5
3.5 +0.5
-0.5
0.4 +0.5
-0.5
Soldering
7.2 -0.5
+0.2
5 +0.2
5 +0.2
-0.2 5 -0.2
-0.2
1.2 +0.2
-0.2
0.85
5.5 +0.2
-0.2
0.8 +0.15
-0.10
0.2
+0.15
-0.10
1
+0.15
-0.10
1.2
+0.15
-0.10
+0.1
5 -0.1 5
+0.1
-0.1
+0.1
-0.1
5
5.5 +0.1
-0.1
0.8 +0.15
-0.10
1
0.4 +0.15
-0.10
0.8 +0.15
-0.10
0.32 -0.10
+0.15
PCB mounting hole layout and
schematic (Bottom view)
+0.1
-0.1
+0.1
¿1.5 0
0.4 +0.15
-0.10
Dimensions (-06)
5
5
5
(1.2)
5. 5
5- φ 1. 5 ±
0 .1
0
Units: mm
FTR-P3 SERIES
RoHS Compliance and Lead Free Relay Information
1. General Information
Relays produced after the specific date code that is indicated on each data sheet are lead-free
now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info.
(http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf)
l
Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu.
l
All signal and most power relays also comply with RoHS. Please refer to individual data
sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that
are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE).
l
It has been verified that using lead-free relays in leaded assembly process will not cause any
problems (compatible).
l
“LF” is marked on each outer and inner carton. (No marking on individual relays).
l
To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office.
l
We will ship leaded relays as long as the leaded relay inventory exists.
Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC)
l
2. Recommended Lead Free Solder Profile
Recommended solder paste Sn-3.0Ag-0.5Cu.
l
Reflow Solder condition
Flow Solder condition:
Pre-heating:
Soldering:
maximum 120˚C
dip within 5 sec. at
260˚C solder bath
Solder by Soldering Iron:
Soldering Iron
Temperature: maximum 360˚C
Duration:
maximum 3 sec.
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
l
Moisture Sensitivity Level standard is not applicable to electromechanical realys.
4. Tin Whisker
l
Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in
house test.
FTR-P3 SERIES
Fujitsu Components International Headquarter Offices
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141 8630, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: emea.fujitsu.com/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: http://www.fujitsu.com/us/services/edevices/components/
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: [email protected]
Web: http://www.fujitsu.com/sg/services/micro/components/
©2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.
Rev. March 4, 2009.
Similar pages