Aluminum Electrolytic Capacitors/FC Radial Lead Type Series: Type :A FC Japan Malaysia China ■ Features Endurance : 105°C 1000 h to 5000 h Low impedance ■ Specifications -55 to + 105°C Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance 6.3 to 63 V .DC 1.0 to 15000 µ F ±20 % (120Hz/+20°C) I 0.01 CV or 3(µ A) DC Leakage Current after 2 minues application of rated working voltage at +20°C(Whichever, is greater) Please see the attached standard products list Dissipation Factor After following life test with DC voltage and +105±2°C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), the capacitors shall meet the limits specified below. Duration : 1000 hours (φ4 to 6.3), 2000hours (φ8), 3000 hours (φ10), 5000 hours (φ12.5 to 18) Post test requirement at +20 °C ±20% of initial measured value Capacitance change 200 % of initial specified value D.F. initial specified value DC leakage current After storage for 1000 hours at +105±2 °C with no voltage applied and then being stabilized at +20 °C, capacitor shall meet the limits specified in “Endurance”.(With voltage treatment) Endurance Shelf Life ■ Frequency correction factor for ripple current Frequency(Hz) 120 1k 10k 0.65 0.85 0.90 0.75 0.90 0.95 0.80 0.90 0.95 0.85 0.95 1.00 Capacitance W.V.(V.DC) 60 0.55 0.70 0.75 0.80 (µF) 1.0 390 1200 2700 6.3 to 63 to 330 to 1000 to 2200 to 15000 100k 1.0 1.0 1.0 1.0 ■ Dimensions in mm (not to scale) φ8! φ10 φd±0.05 P± 0.5 (!6.3mm dia) P± 0.5 P.V.C. Sleeve Vent L L 16:L+1.0 max L !20:L+2.0 max φD+0.5 max 3min 14 min L !11 L=7 Body Dia. φD 4 5 φD+0.5 max 6.3 4 5 6.3 8 10 Body Length L 12.5 16 18 15 to25 30 to 35 Lead Dia. φd 0.45 0.45 0.45 0.45 0.5 0.5 0.6 0.6 0.6 0.8 0.8 0.8 Lead space P 1.5 2 2.5 1.5 2.0 2.5 3.5 5.0 5.0 5.0 7.5 7.5 $ESIGN AND SPECIlCATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE !SK FACTORY FOR TECHNICAL SPECIlCATIONS BEFORE PURCHASE ANDOR USE 7HENEVER A DOUBT ABOUT SAFETY ARISES FROM THIS PRODUCT PLEASE CONTACT US IMMEDIATELY FOR TECHNICAL CONSULTATION Aluminum Electrolytic Capacitors/FC Case size/ Impedance/ Ripple Current 6.3 V to 35V W.V.(V.DC) Impedance Ω /100kHz 50V Ripple Current mA r.m.s. /100 kHz Case size (φD×L) 20°C -10°C 4 × 5 × 6.3 × 4 × 5 × 7 7 7 11 11 2.00 0.95 0.45 1.30 0.80 5.00 2.40 1.20 2.60 1.60 65 120 200 120 175 15 11.2 15 11.5 15 20 12.5 16 20 25 30 15 20 25 30 35 40 15 20 25 31.5 35.5 40 15 20 25 31.5 35.5 40 0.50 0.35 0.25 0.117 0.085 0.065 0.090 0.068 0.052 0.045 0.035 0.065 0.038 0.030 0.025 0.022 0.018 0.043 0.029 0.022 0.018 0.016 0.015 0.038 0.028 0.020 0.016 0.015 0.014 1.00 0.700 0.500 0.234 0.170 0.130 0.180 0.136 0.104 0.090 0.070 0.130 0.076 0.060 0.050 0.044 0.036 0.086 0.058 0.044 0.036 0.032 0.030 0.076 0.056 0.040 0.032 0.030 0.028 235 290 400 555 730 995 765 1050 1220 1440 1815 1205 1655 1945 2310 2510 2655 1690 2205 2555 3010 3150 3360 2000 2490 2740 3635 3680 3735 5 × 6.3 × 6.3 × 8 × 8 × 8 × 10 × 10 × 10 × 10 × 10 × 12.5 × 12.5 × 12.5 × 12.5 × 12.5 × 12.5 × 16 × 16 × 16 × 16 × 16 × 16 × 18 × 18 × 18 × 18 × 18 × 18 × Impedance Ω /100kHz 20°C -10°C 2.50 2.4 ❉1 1.3 ❉2 0.90 0.60 0.40 0.234 0.155 0.120 0.160 0.119 0.090 0.082 0.060 0.110 0.063 0.050 0.040 0.034 0.030 0.080 0.048 0.034 0.028 0.025 0.023 0.068 0.042 0.029 0.025 0.023 - 5.00 4.8 ❉1 2.6 ❉2 1.80 1.20 0.80 0.468 0.310 0.240 0.324 0.238 0.180 0.164 0.120 0.220 0.126 0.100 0.080 0.068 0.060 0.160 0.096 0.068 0.056 0.050 0.046 0.136 0.084 0.058 0.050 0.046 - 63V Ripple Current mA r.m.s. /100 kHz 90 ❉3 ❉3 215 260 360 485 635 860 615 850 1030 1200 1610 1150 1480 1832 2215 2285 2590 1610 1835 2235 2700 2790 2845 1900 2420 2610 3000 3100 - Impedance Ω /100kHz 20°C -10°C Ripple Current mA r.m.s. /100 kHz 3.50 2.00 7.00 4.00 80 145 1.30 1.00 0.70 0.342 0.230 0.178 0.256 0.194 0.147 0.130 0.090 0.150 0.085 0.070 0.055 0.047 0.042 0.090 0.059 0.050 0.043 0.036 0.030 0.086 0.055 0.043 0.032 0.030 0.025 2.60 2.00 1.40 0.684 0.460 0.356 0.512 0.368 0.294 0.260 0.180 0.300 0.170 0.140 0.110 0.094 0.084 0.180 0.118 0.100 0.080 0.072 0.060 0.172 0.110 0.086 0.064 0.060 0.050 200 240 330 405 535 690 535 600 885 1050 1300 1020 1285 1720 2090 2265 2560 1410 1765 2160 2670 2770 2825 1690 2290 2585 2950 3095 3205 ❉1; Apply to 1µF ❉2; Apply to 2.2, 3.3, 4.7, 10L, 12, 18, and 22µF ❉3 Case size Capacitance φ D×L (mm) (µF) 5 ×11 1.0 2.2 3.3 4.7 10L 12 15 18 22 Impedance Ω/100kHz 20°C 2.40 1.30 1.30 1.30 1.30 1.30 1.30 1.30 1.30 -10°C 4.80 2.60 2.60 2.60 2.60 2.60 2.60 2.60 2.60 Ripple Current mA r.m.s /100 kHz 20 45 65 95 125 135 145 155 155 $ESIGN AND SPECIlCATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE !SK FACTORY FOR TECHNICAL SPECIlCATIONS BEFORE PURCHASE ANDOR USE 7HENEVER A DOUBT ABOUT SAFETY ARISES FROM THIS PRODUCT PLEASE CONTACT US IMMEDIATELY FOR TECHNICAL CONSULTATION Aluminum Electrolytic Capacitors/FC ■ Standard Products Case size W.V. (V) Cap. Length 27 4 7 65 Part No. 56 5 7 68 4 11 100 5 11 120 6.3 7 150 5 15 220 6.3 11.2 270 6.3 330 Min.Packaging Q'ty Straight Taping Leads (pcs) (pcs) 0.45 1.5 5.0 2.5 EEAFC0J270( ) 200 2000 120 0.950 1000 0.45 2.0 5.0 2.5 EEAFC0J560( ) 200 2000 120 1.30 1000 0.45 1.5 5.0 2.5 EEUFC0J680( ) 200 2000 175 0.80 1000 0.50 2.0 5.0 2.5 EEUFC0J101( ) 200 2000 200 0.450 1000 0.45 2.5 5.0 2.5 EEAFC0J121( ) 200 2000 235 0.50 1000 0.50 2.0 5.0 2.5 EEUFC0J151( ) 200 2000 290 0.350 1000 0.50 2.0 5.0 2.5 EEUFC0J221( ) 200 2000 11.2 290 0.350 1000 0.50 2.0 5.0 2.5 EEUFC0J271( ) 200 2000 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC0J331S( ) 200 2000 6.3 15 400 0.250 1000 0.50 2.5 5.0 2.5 EEUFC0J331( ) 200 2000 390 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC0J391( ) 200 1000 470 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC0J471( ) 200 1000 560 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC0J561( ) 200 1000 820 8 15 730 0.085 2000 0.60 3.5 5.0 EEUFC0J821L( ) 200 1000 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC0J821 200 500 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC0J102( ) 200 500 1000 1200 1500 2.0 8 20 995 0.065 2000 0.60 3.5 5.0 EEUFC0J122L( ) 200 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC0J122( ) 200 500 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC0J152( ) 200 500 500 12.5 15 1205 0.065 5000 0.60 5.0 5.0 EEUFC0J152S( ) 200 1800 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC0J182 200 500 2200 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC0J222( ) 200 500 16 15 1690 0.043 5000 0.80 7.5 7.5 250 10 30 1815 0.035 3000 0.60 5.0 2700 3300 3900 4700 5600 6800 10 Lead Length 1000 1000 6.3 Specification Ripple Imped- Endur- Lead Lead Space current ance (±20%) ance Dia. Straight Taping Taping (100kHz) (100kHz) ❉B ❉H (+105°C) (+20°C) (µF) ( m m ) (mm) (m A ) (Ω) (hours) ( m m ) ( m m ) (mm) ( m m ) Dia. EEUFC0J222S( ) 100 EEUFC0J272L 100 12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC0J272( ) 200 16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC0J272S( ) 100 250 12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC0J332( ) 200 500 18 15 2000 0.038 5000 0.80 7.5 7.5 EEUFC0J332S( ) 100 250 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC0J392( ) 200 500 EEUFC0J472 100 7.5 EEUFC0J472S( ) 100 EEUFC0J562L 100 12.5 30 2310 0.025 5000 0.80 5.0 16 20 2205 0.029 5000 0.80 7.5 12.5 35 2510 0.022 5000 0.80 5.0 16 20 2205 0.029 5000 0.80 7.5 12.5 40 2655 0.018 5000 0.80 5.0 7.5 EEUFC0J562( ) 100 EEUFC0J682L 100 500 250 250 16 25 2555 0.022 5000 0.80 7.5 7.5 EEUFC0J682( ) 100 250 18 20 2490 0.028 5000 0.80 7.5 7.5 EEUFC0J682S( ) 100 250 8200 16 31.5 3010 0.018 5000 0.80 7.5 EEUFC0J822 100 10000 16 35.5 3150 0.016 5000 0.80 7.5 18 25 2740 0.020 5000 0.80 7.5 12000 16 40 3360 0.015 5000 0.80 7.5 18 31.5 3635 0.016 5000 0.80 7.5 EEUFC0J123 50 15000 18 35.5 3680 0.015 5000 0.80 7.5 EEUFC0J153 50 22 4 7 2.0 0.45 1.5 65 1000 7.5 5.0 2.5 EEUFC0J103 100 EEUFC0J103S( ) 100 EEUFC0J123L 100 EEAFC1A220( ) 200 When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5mm, 7.5mm. H=2.5mm. $ESIGN AND SPECIlCATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE !SK FACTORY FOR TECHNICAL SPECIlCATIONS BEFORE PURCHASE ANDOR USE 7HENEVER A DOUBT ABOUT SAFETY ARISES FROM THIS PRODUCT PLEASE CONTACT US IMMEDIATELY FOR TECHNICAL CONSULTATION 250 2000 Aluminum Electrolytic Capacitors/FC ■ Standard Products Specification Lead Length Ripple Imped- Endur- Lead Lead Space ance current (±20%) ance Dia. Straight Taping Taping (100kHz) (100kHz) ❉B ❉H (+105°C) (+20°C) (µF) ( m m ) (mm) (m A ) (Ω) (hours) ( m m ) ( m m ) (mm) ( m m ) Case size W.V. (V) Cap. Part No. Min. Packaging Q'ty Dia. Length (pcs) (pcs) 39 5 7 120 0.950 1000 0.45 2.0 5.0 2.5 EEAFC1A390( ) 200 2000 47 4 11 120 1.30 1000 0.45 1.5 5.0 2.5 EEUFC1A470( ) 200 2000 82 5 11 175 0.80 1000 0.50 2.0 5.0 2.5 EEUFC1A820( ) 200 2000 7 200 0.450 1000 0.45 2.5 5.0 2.5 EEAFC1A820( ) 200 2000 5 11 175 0.80 1000 0.50 2.0 5.0 2.5 EEUFC1A101S( ) 200 2000 5 15 235 0.50 1000 0.50 2.0 5.0 2.5 EEUFC1A101( ) 200 2000 150 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1A151( ) 200 2000 180 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1A181( ) 200 2000 220 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1A221S( ) 200 2000 6.3 15 400 0.250 1000 0.50 2.5 5.0 2.5 EEUFC1A221( ) 200 2000 330 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1A331( ) 200 1000 390 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1A391( ) 200 1000 470 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1A471( ) 200 1000 560 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1A561 200 500 680 8 15 730 0.085 2000 0.60 3.5 5.0 EEUFC1A681L( ) 200 1000 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1A681( ) 200 500 820 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1A821( ) 200 500 1000 8 20 995 0.065 2000 0.60 3.5 5.0 EEUFC1A102L( ) 200 1000 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1A102( ) 200 500 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1A122( ) 200 500 12.5 15 1205 0.065 5000 0.60 5.0 5.0 EEUFC1A122S( ) 200 500 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC1A152( ) 200 500 6.3 100 1200 10 1500 1800 2200 2700 3300 3900 4700 5600 6800 Straight Taping Leads 12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1A182( ) 200 500 16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC1A182S( ) 100 250 10 30 1815 0.035 3000 0.60 5.0 EEUFC1A222L 100 12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1A222( ) 200 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1A272( ) 200 500 18 15 2000 0.038 5000 0.80 7.5 7.5 EEUFC1A272S( ) 100 250 12.5 30 2310 0.025 5000 0.80 5.0 16 20 2205 0.029 5000 0.80 7.5 12.5 35 2510 0.022 5000 0.80 5.0 16 20 2205 0.029 5000 0.80 7.5 12.5 40 2655 0.018 5000 0.80 5.0 16 25 2555 0.022 5000 0.80 7.5 16 25 2555 0.022 5000 0.80 7.5 18 20 2490 0.028 5000 0.80 7.5 16 31.5 3010 0.018 5000 0.80 7.5 7.5 7.5 EEUFC1A332 100 EEUFC1A332S( ) 100 EEUFC1A392L 100 500 250 EEUFC1A392( ) 100 EEUFC1A472L 100 7.5 EEUFC1A472( ) 100 250 7.5 EEUFC1A562( ) 100 250 7.5 EEUFC1A562S( ) 100 250 EEUFC1A682 100 EEUFC1A682S( ) 100 EEUFC1A822L 100 18 25 2740 0.020 5000 0.80 7.5 8200 16 35.5 3150 0.016 5000 0.80 7.5 7.5 18 31.5 3635 0.016 5000 0.80 7.5 EEUFC1A822 50 10000 18 35.5 3680 0.015 5000 0.80 7.5 EEUFC1A103 50 12000 18 40 3735 0.014 5000 0.80 7.5 EEUFC1A123 50 When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5mm, 7.5mm. H=2.5mm. $ESIGN AND SPECIlCATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE !SK FACTORY FOR TECHNICAL SPECIlCATIONS BEFORE PURCHASE ANDOR USE 7HENEVER A DOUBT ABOUT SAFETY ARISES FROM THIS PRODUCT PLEASE CONTACT US IMMEDIATELY FOR TECHNICAL CONSULTATION 250 250 Aluminum Electrolytic Capacitors/FC ■ Standard Products Case size W.V. (V) Specification Lead Length Ripple Imped- Endur- Lead Lead Space current ance (±20%) Dia. Straight Taping Taping (100kHz) (100kHz) ance ❉H ❉B (+105°C) (+20°C) (µF) ( m m ) (mm) (m A ) (Ω) (hours) ( m m ) ( m m ) (mm) ( m m ) Cap. Dia. Length 15 4 7 65 27 5 7 39 4 47 56 Part No. Min.Packaging Q'ty Straight Taping Leads (pcs) (pcs) 1000 0.45 1.5 5.0 2.5 EEAFC1C150( ) 200 2000 120 0.950 1000 0.45 2.0 5.0 2.5 EEAFC1C270( ) 200 2000 11 120 1.30 1000 0.45 1.5 5.0 2.5 EEUFC1C390( ) 200 2000 5 11 175 0.80 1000 0.50 2.0 5.0 2.5 EEUFC1C470( ) 200 2000 5 11 175 0.80 1000 0.50 2.0 5.0 2.5 EEUFC1C560( ) 200 2000 7 200 0.450 1000 0.45 2.5 5.0 2.5 EEAFC1C560( ) 200 2000 2000 6.3 2.0 68 5 11 175 0.80 1000 0.50 2.0 5.0 2.5 EEUFC1C680( ) 200 82 5 15 235 0.50 1000 0.50 2.0 5.0 2.5 EEUFC1C820( ) 200 2000 100 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1C101( ) 200 2000 120 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1C121( ) 200 2000 180 6.3 15 400 0.250 1000 0.50 2.5 5.0 2.5 EEUFC1C181( ) 200 2000 220 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1C221( ) 200 1000 270 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1C271( ) 200 1000 330 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1C331( ) 200 1000 390 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1C391( ) 200 500 470 8 15 730 0.085 2000 0.60 3.5 5.0 EEUFC1C471L( ) 200 1000 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1C471( ) 200 500 560 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1C561( ) 200 500 680 8 20 995 0.065 2000 0.60 3.5 5.0 EEUFC1C681L( ) 200 1000 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1C681( ) 200 500 820 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1C821( ) 200 500 500 16 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 12.5 15 1205 0.065 5000 0.60 5.0 5.0 EEUFC1C821S( ) 200 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1C102S( ) 200 500 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC1C102( ) 200 500 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC1C122( ) 200 500 16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC1C122S( ) 100 250 10 30 1815 0.035 3000 0.60 5.0 EEUFC1C152L 100 12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1C152( ) 200 16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC1C152S( ) 100 250 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1C182( ) 200 500 18 15 2000 0.038 5000 0.80 7.5 7.5 EEUFC1C182S( ) 100 250 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1C222( ) 200 500 16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC1C222S( ) 100 250 12.5 30 2310 0.025 5000 0.80 5.0 EEUFC1C272L 100 EEUFC1C272( ) 100 EEUFC1C332 100 16 20 2205 0.029 5000 0.80 7.5 12.5 35 2510 0.022 5000 0.80 5.0 18 20 2490 0.028 5000 0.80 7.5 7.5 EEUFC1C332S( ) 100 250 16 25 2555 0.022 5000 0.80 7.5 7.5 EEUFC1C392( ) 100 250 7.5 250 18 20 2490 0.028 5000 0.80 7.5 16 31.5 3010 0.018 5000 0.80 7.5 18 25 2740 0.020 5000 0.80 7.5 16 35.5 3150 0.016 5000 0.80 7.5 18 31.5 3635 0.016 5000 0.80 7.5 7.5 500 7.5 EEUFC1C392S 100 EEUFC1C472 100 EEUFC1C472S( ) 100 EEUFC1C562L 100 EEUFC1C562 50 When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5mm, 7.5mm. H=2.5mm. $ESIGN AND SPECIlCATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE !SK FACTORY FOR TECHNICAL SPECIlCATIONS BEFORE PURCHASE ANDOR USE 7HENEVER A DOUBT ABOUT SAFETY ARISES FROM THIS PRODUCT PLEASE CONTACT US IMMEDIATELY FOR TECHNICAL CONSULTATION 250 250 Aluminum Electrolytic Capacitors/FC ■ Standard Products Case size W.V. (V) 16 Specification Lead Length Ripple Imped- Endur- Lead Lead Space current ance (±20%) Dia. Straight Taping Taping (100kHz) (100kHz) ance ❉B ❉H (+105°C) (+20°C) (µF) ( m m ) (mm) (m A ) (Ω) (hours) ( m m ) ( m m ) (mm) ( m m ) Min.Packaging Q'ty Dia. 6800 16 40 3360 0.015 5000 0.80 7.5 8200 18 35.5 3680 0.015 5000 0.80 7.5 10 4 7 65 2.0 1000 0.45 1.5 5.0 2.5 EEAFC1E100( ) 200 2000 22 5 7 120 0.950 1000 0.45 2.0 5.0 2.5 EEAFC1E220( ) 200 2000 27 4 11 120 1.30 1000 0.45 1.5 5.0 2.5 EEUFC1E270( ) 200 2000 39 5 11 175 0.80 1000 0.50 2.0 5.0 2.5 EEUFC1E390( ) 200 2000 7 200 0.450 1000 0.45 2.5 5.0 2.5 EEAFC1E390( ) 200 2000 6.3 25 Part No. Cap. Length Straight Taping Leads (pcs) EEUFC1C682 EEUFC1C822 (pcs) 100 50 47 5 11 175 0.80 1000 0.50 2.0 5.0 2.5 EEUFC1E470( ) 200 2000 56 5 15 235 0.50 1000 0.50 2.0 5.0 2.5 EEUFC1E560( ) 200 2000 82 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1C820( ) 200 2000 100 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1E101S( ) 200 2000 120 6.3 15 400 0.250 1000 0.50 2.5 5.0 2.5 EEUFC1E121( ) 200 2000 180 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1E181( ) 200 1000 220 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1E221( ) 200 1000 270 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1E271( ) 200 500 330 8 15 730 0.085 2000 0.60 3.5 5.0 EEUFC1E331L( ) 200 1000 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1E331( ) 200 500 390 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1E391( ) 200 500 470 8 20 995 0.065 2000 0.60 3.5 5.0 EEUFC1E471L( ) 200 1000 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1E471( ) 200 500 560 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1E561( ) 200 500 12.5 15 1205 0.065 5000 0.60 5.0 5.0 EEUFC1E561S( ) 200 500 680 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1E681( ) 200 500 820 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC1E821( ) 200 500 12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1E821S( ) 200 500 10 30 1815 0.035 3000 0.60 5.0 EEUFC1E102L 100 1000 1200 1500 1800 2200 2700 3300 12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1E102( ) 200 16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC1E102S( ) 100 250 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1E122( ) 200 500 18 15 2000 0.038 5000 0.80 7.5 7.5 EEUFC1E122S( ) 100 250 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1E152( ) 200 500 16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC1E152S( ) 100 250 12.5 30 2310 0.025 5000 0.80 5.0 EEUFC1E182L 100 EEUFC1E182( ) 100 EEUFC1E222 100 7.5 500 16 20 2205 0.029 5000 0.80 7.5 12.5 35 2510 0.022 5000 0.80 5.0 18 20 2490 0.028 5000 0.80 7.5 7.5 EEUFC1E222S( ) 100 250 16 25 2555 0.022 5000 0.80 7.5 7.5 EEUFC1E272( ) 100 250 16 31.5 3010 0.018 5000 0.80 7.5 18 25 2740 0.020 5000 0.80 7.5 3900 16 35.5 3150 0.016 5000 0.80 7.5 18 31.5 3635 0.016 5000 0.80 7.5 EEUFC1E392 50 4700 18 35.5 3680 0.015 5000 0.80 7.5 EEUFC1E472 50 5600 18 40 3735 0.014 5000 0.80 7.5 EEUFC1E562 50 7.5 EEUFC1E332 100 EEUFC1E332S( ) 100 EEUFC1E392L 100 When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5mm, 7.5mm. H=2.5mm. $ESIGN AND SPECIlCATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE !SK FACTORY FOR TECHNICAL SPECIlCATIONS BEFORE PURCHASE ANDOR USE 7HENEVER A DOUBT ABOUT SAFETY ARISES FROM THIS PRODUCT PLEASE CONTACT US IMMEDIATELY FOR TECHNICAL CONSULTATION 250 250 Aluminum Electrolytic Capacitors/FC ■ Standard Products Specification Lead Length Ripple Imped- Endur- Lead Lead Space current ance (±20%) ance Dia. Straight Taping Taping (100kHz) (100kHz) ❉H ❉B (+105°C) (+20°C) (µF) ( m m ) (mm) (m A ) (Ω) (hours) ( m m ) ( m m ) (mm) ( m m ) Case size W.V. (V) Cap. 6.8 Dia. Length 4 7 Min. Packaging Q'ty Straight Taping Leads (pcs) (pcs) 2.000 1000 0.45 1.5 5.0 2.5 EEAFC1V6R8( ) 200 2000 12 5 7 120 0.950 1000 0.45 2.0 5.0 2.5 EEAFC1V120( ) 200 2000 18 4 11 120 1.300 1000 0.45 1.5 5.0 2.5 EEUFC1V180( ) 200 2000 22 5 11 175 0.800 1000 0.50 2.0 5.0 2.5 EEUFC1V220( ) 200 2000 27 5 11 175 0.800 1000 0.50 2.0 5.0 2.5 EEUFC1V270( ) 200 2000 7 200 0.450 1000 0.45 2.5 5.0 2.5 EEAFC1V270( ) 200 2000 2000 6.3 35 65 Part No. 33 5 11 175 0.080 1000 0.50 2.0 5.0 2.5 EEUFC1V330( ) 200 39 5 15 235 0.500 1000 0.50 2.0 5.0 2.5 EEUFC1V390( ) 200 2000 47 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1V470( ) 200 2000 56 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1V560( ) 200 2000 68 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1V680( ) 200 2000 82 6.3 15 400 0.250 1000 0.50 2.5 5.0 2.5 EEUFC1V820( ) 200 2000 100 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1V101( ) 200 1000 120 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1V121( ) 200 1000 150 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1V151( ) 200 1000 180 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1V181( ) 200 500 220 8 15 730 0.085 2000 0.60 3.5 5.0 EEUFC1V221L( ) 200 1000 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1V221( ) 200 500 270 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1V271( ) 200 500 330 8 20 995 0.065 2000 0.60 3.5 5.0 EEUFC1V331L( ) 200 1000 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1V331( ) 200 500 390 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1V391( ) 200 500 12.5 15 1205 0.065 5000 0.60 5.0 5.0 EEUFC1V391S( ) 200 500 470 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1V471( ) 200 500 560 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC1V561( ) 200 500 12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1V561S( ) 200 500 10 30 1815 0.035 3000 0.60 5.0 EEUFC1V681L 100 680 820 1000 1200 1500 1800 2200 12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1V681( ) 200 500 16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC1V681S( ) 100 250 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1V821L( ) 200 500 18 15 2000 0.038 5000 0.80 7.5 7.5 EEUFC1V821( ) 100 250 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1V102( ) 200 500 16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC1V102S( ) 100 250 12.5 30 2310 0.025 5000 0.80 5.0 EEUFC1V122L 100 16 20 2205 0.029 5000 0.80 7.5 12.5 35 2510 0.022 5000 0.80 5.0 7.5 EEUFC1V122( ) 100 EEUFC1V152L 100 250 16 25 2555 0.022 5000 0.80 7.5 7.5 EEUFC1V152( ) 100 250 18 20 2490 0.028 5000 0.80 7.5 7.5 EEUFC1V152S( ) 100 250 12.5 40 2655 0.018 5000 0.80 5.0 EEUFC1V182L 100 16 25 2555 0.022 5000 0.80 7.5 7.5 EEUFC1V182( ) 100 250 18 20 2490 0.028 5000 0.80 7.5 7.5 EEUFC1V182S( ) 100 250 16 31.5 3010 0.018 5000 0.80 7.5 EEUFC1V222 100 18 25 2740 0.020 5000 0.80 7.5 EEUFC1V222S( ) 100 7.5 When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5mm, 7.5mm. H=2.5mm. $ESIGN AND SPECIlCATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE !SK FACTORY FOR TECHNICAL SPECIlCATIONS BEFORE PURCHASE ANDOR USE 7HENEVER A DOUBT ABOUT SAFETY ARISES FROM THIS PRODUCT PLEASE CONTACT US IMMEDIATELY FOR TECHNICAL CONSULTATION 250 Aluminum Electrolytic Capacitors/FC ■ Standard Products Lead Length Specification Ripple Imped- Endur- Lead Lead Space current ance (±20%) Dia. Straight Taping Taping ance (100kHz) (100kHz) ❉B ❉H (+105°C) (+20°C) (µF) ( m m ) (mm) (m A ) (Ω) (hours) ( m m ) ( m m ) (mm) ( m m ) Case size W.V. (V) Cap. Dia. Part No. Length 3150 0.016 5000 0.80 7.5 Straight Taping Leads (pcs) 2700 16 18 31.5 3635 0.016 5000 0.80 7.5 EEUFC1V272 50 3300 18 35.5 3680 0.015 5000 0.80 7.5 EEUFC1V332 50 3900 35 35.5 Min.Packaging Q'ty EEUFC1V272L 18 40 3735 0.014 5000 0.80 7.5 1.0 5 11 20 2.40 1000 0.50 2.0 5.0 2.5 EEUFC1H1R0( ) 200 2000 2.2 5 11 45 1.30 1000 0.50 2.0 5.0 2.5 EEUFC1H2R2( ) 200 2000 3.3 5 11 65 1.30 1000 0.50 2.0 5.0 2.5 EEUFC1H3R3( ) 200 2000 4.7 5 11 95 1.30 1000 0.50 2.0 5.0 2.5 EEUFC1H4R7( ) 200 2000 4 11 90 2.50 1000 0.45 1.5 5.0 2.5 EEUFC1H100( ) 200 2000 10 EEUFC1V392 (pcs) 100 50 5 11 125 1.30 1000 0.50 2.0 5.0 2.5 EEUFC1H100L( ) 200 2000 12 5 11 135 1.30 1000 0.50 2.0 5.0 2.5 EEUFC1H120( ) 200 2000 15 5 11 145 1.30 1000 0.50 2.0 5.0 2.5 EEUFC1H150( ) 200 2000 18 5 11 155 1.30 1000 0.50 2.0 5.0 2.5 EEUFC1H180( ) 200 2000 22 5 11 155 1.30 1000 0.50 2.0 5.0 2.5 EEUFC1H220( ) 200 2000 27 5 15 215 0.90 1000 0.50 2.0 5.0 2.5 EEUFC1H270( ) 200 2000 33 6.3 11.2 260 0.60 1000 0.50 2.5 5.0 2.5 EEUFC1H330( ) 200 2000 39 6.3 11.2 260 0.60 1000 0.50 2.5 5.0 2.5 EEUFC1H390( ) 200 2000 47 6.3 11.2 260 0.60 1000 0.50 2.5 5.0 2.5 EEUFC1H470( ) 200 2000 56 6.3 15 360 0.40 1000 0.50 2.5 5.0 2.5 EEUFC1H560( ) 200 2000 68 8 11.5 485 0.234 2000 0.60 3.5 5.0 EEUFC1H680( ) 200 1000 1000 82 8 11.5 485 0.234 2000 0.60 3.5 5.0 EEUFC1H820( ) 200 100 10 12.5 615 0.162 3000 0.60 5.0 5.0 EEUFC1H101( ) 200 500 120 8 15 635 0.155 2000 0.60 3.5 5.0 EEUFC1H121L( ) 200 1000 10 12.5 615 0.162 3000 0.60 5.0 5.0 EEUFC1H121( ) 200 500 150 10 16 850 0.119 3000 0.6 5.0 5.0 EEUFC1H151( ) 200 500 1000 50 180 8 20 860 0.120 2000 0.60 3.5 5.0 EEUFC1H181L( ) 200 10 16 850 0.119 3000 0.60 5.0 5.0 EEUFC1H181( ) 200 500 220 10 20 1030 0.090 3000 0.60 5.0 5.0 EEUFC1H221( ) 200 500 12.5 15 1150 0.110 5000 0.60 5.0 5.0 EEUFC1H221S( ) 200 500 270 10 25 1200 0.082 3000 0.60 5.0 5.0 EEUFC1H271( ) 200 500 330 10 30 1610 0.060 3000 0.60 5.0 EEUFC1H331L 100 12.5 20 1480 0.063 5000 0.60 5.0 5.0 EEUFC1H331( ) 200 500 390 12.5 20 1480 0.063 5000 0.60 5.0 5.0 EEUFC1H391( ) 200 500 16 15 1610 0.080 5000 0.80 7.5 7.5 EEUFC1H391S( ) 100 250 470 10 30 1610 0.060 3000 0.60 5.0 EEUFC1H471L 100 12.5 25 1832 0.050 5000 0.60 5.0 5.0 EEUFC1H471( ) 200 500 560 12.5 25 1832 0.050 5000 0.60 5.0 5.0 EEUFC1H561( ) 200 500 18 15 1900 0.068 5000 0.80 7.5 7.5 EEUFC1H561S( ) 100 250 680 12.5 30 2215 0.040 5000 0.80 5.0 EEUFC1H681L 100 16 20 1835 0.048 5000 0.80 7.5 820 12.5 35 2285 0.034 5000 0.80 5.0 1000 18 20 2420 0.042 5000 0.80 7.5 12.5 40 2590 0.030 5000 0.80 5.0 16 25 2235 0.034 5000 0.80 7.5 7.5 7.5 7.5 EEUFC1H681( ) 100 EEUFC1H821L 100 EEUFC1H821( ) 100 EEUFC1H102L 100 EEUFC1H102( ) 100 250 250 250 When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5mm, 7.5mm. H=2.5mm. $ESIGN AND SPECIlCATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE !SK FACTORY FOR TECHNICAL SPECIlCATIONS BEFORE PURCHASE ANDOR USE 7HENEVER A DOUBT ABOUT SAFETY ARISES FROM THIS PRODUCT PLEASE CONTACT US IMMEDIATELY FOR TECHNICAL CONSULTATION Aluminum Electrolytic Capacitors/FC ■ Standard Products Specification Lead Length Ripple Imped- Endur- Lead Lead Space current ance (±20%) ance Dia. Straight Taping Taping (100kHz) (100kHz) ❉B ❉H (+105°C) (+20°C) (µF) ( m m ) (mm) (m A ) (Ω) (hours) ( m m ) ( m m ) (mm) ( m m ) Case size W.V. (V) 50 Cap. Dia. 1200 16 31.5 2700 0.028 5000 18 25 2610 0.029 5000 0.80 7.5 16 35.5 2790 0.025 5000 0.80 7.5 1500 1800 0.80 7.5 7.5 Min. Packaging Q'ty Straight Taping Leads (pcs) EEUFC1H122 100 EEUFC1H122S( ) 100 EEUFC1H152L 100 100 16 40 2845 0.023 5000 0.80 7.5 EEUFC1H182L 18 31.5 3000 0.025 5000 0.80 7.5 EEUFC1H182 50 2200 18 35.5 3100 0.023 5000 0.80 7.5 EEUFC1H222 50 (pcs) 250 6.8 4 11 80 3.50 1000 0.45 1.5 5.0 2.5 EEUFC1J6R8( ) 200 2000 12 5 11 145 2.0 1000 0.50 2.0 5.0 2.5 EEUFC1J120( ) 200 2000 18 5 15 200 1.30 1000 0.50 2.0 5.0 2.5 EEUFC1J180( ) 200 2000 22 6.3 11.2 240 1.0 1000 0.50 2.5 5.0 2.5 EEUFC1J220( ) 200 2000 33 6.3 11.2 240 1.0 1000 0.50 2.5 5.0 2.5 EEUFC1J330( ) 200 2000 39 6.3 15 330 0.70 1000 0.50 2.5 5.0 2.5 EEUFC1J390( ) 200 2000 47 8 11.5 405 0.342 2000 0.60 3.5 5.0 EEUFC1J470( ) 200 1000 56 8 11.5 405 0.342 2000 0.60 3.5 5.0 EEUFC1J560( ) 200 1000 68 8 11.5 405 0.342 2000 0.60 3.5 5.0 EEUFC1J680( ) 200 1000 82 10 12.5 535 0.256 3000 0.60 5.0 5.0 EEUFC1J820( ) 200 500 100 8 15 535 0.230 2000 0.60 3.5 5.0 EEUFC1J101L( ) 200 1000 10 12.5 535 0.256 3000 0.60 5.0 5.0 EEUFC1J101( ) 200 500 120 10 16 600 0.194 3000 0.60 5.0 5.0 EEUFC1J121( ) 200 500 150 8 20 690 0.178 2000 0.60 3.5 5.0 EEUFC1J151( ) 200 1000 180 10 20 885 0.147 3000 0.60 5.0 5.0 EEUFC1J181( ) 200 500 12.5 15 1020 0.150 5000 0.60 5.0 5.0 EEUFC1J181S( ) 200 500 10 20 885 0.147 3000 0.60 5.0 5.0 EEUFC1J221X( ) 200 500 10 25 1050 0.130 3000 0.60 5.0 5.0 EEUFC1J221( ) 200 500 220 63 Part No. Length 12.5 20 1285 0.085 5000 0.60 5.0 5.0 EEUFC1J221S( ) 200 500 270 16 15 1410 0.090 5000 0.80 7.5 7.5 EEUFC1J271( ) 100 250 330 10 30 1300 0.090 3000 0.60 5.0 EEUFC1J331L 100 12.5 20 1285 0.085 5000 0.60 5.0 5.0 EEUFC1J331( ) 200 500 390 12.5 25 1720 0.070 5000 0.60 5.0 5.0 EEUFC1J391( ) 200 500 18 15 1690 0.086 5000 0.80 7.5 7.5 EEUFC1J391S( ) 100 250 470 12.5 30 2090 0.055 5000 0.80 5.0 EEUFC1J471L 100 16 20 1765 0.059 5000 0.80 7.5 7.5 EEUFC1J471( ) 100 250 560 16 25 2160 0.050 5000 0.80 7.5 7.5 EEUFC1J561( ) 100 250 680 12.5 35 2265 0.047 5000 0.80 5.0 EEUFC1J681L 100 16 25 2160 0.050 5000 0.80 7.5 7.5 EEUFC1J681( ) 100 250 18 20 2290 0.055 5000 0.80 7.5 7.5 EEUFC1J681S( ) 100 250 12.5 40 2560 0.042 5000 0.80 5.0 EEUFC1J821L 100 16 31.5 2670 0.043 5000 0.80 7.5 18 25 2585 0.043 5000 0.80 7.5 16 31.5 2670 0.043 5000 0.80 7.5 16 35.5 2770 0.036 5000 0.80 16 40 2825 0.030 5000 0.80 18 31.5 2950 0.032 5000 0.80 1500 18 35.5 3095 0.030 5000 1800 18 40 3205 0.025 5000 820 1000 1200 EEUFC1J821 100 EEUFC1J821S( ) 100 EEUFC1J102U 100 7.5 EEUFC1J102 100 7.5 EEUFC1J122L 100 7.5 EEUFC1J122 50 0.80 7.5 EEUFC1J152 50 0.80 7.5 EEUFC1J182 50 7.5 250 When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5mm, 7.5mm. H=2.5mm. $ESIGN AND SPECIlCATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE !SK FACTORY FOR TECHNICAL SPECIlCATIONS BEFORE PURCHASE ANDOR USE 7HENEVER A DOUBT ABOUT SAFETY ARISES FROM THIS PRODUCT PLEASE CONTACT US IMMEDIATELY FOR TECHNICAL CONSULTATION