Caliber OAE1048CC Ecl and pecl oscillator Datasheet

OAE, OAP, OAP3 Series
C A L I B E R
Lead-Free
RoHS Compliant
ECL and PECL Oscillator
PART NUMBERING GUIDE
Electronics Inc.
Environmental/Mechanical Specifications on page F5
OAE 100 27 AA C - 30.000MHz
Package
OAE = 14 Pin Dip / ±5.2Vdc / ECL
OAP = 14 Pin Dip / +5.0Vdc / PECL
OAP3 = 14 Pin Dip / +3.3Vdc / PECL
Pin One Connection
Blank = No Connect
C = Complimentary Output
Inclusive Stability
100= +/-100ppm, 50= +/-50ppm, 25= +/-25ppm,
10= +/-10ppm @ 25°C / +/-20ppm @ 0-70°C
Pin Configurationy
See Table Below
ECL = AA, AB, AC, AB
PECL = A, B, C, E
Operating Temperature Range
Blank = 0°C to 70°C
27 = -20°C to 70°C (50ppm and 100ppm Only)
48 = -40°C to 85°C (50ppm and 100ppm Only)
ELECTRICAL SPECIFICATIONS
Revision: 1994-B
Frequency Range
20.000MHz to 250.000MHz
Operating Temperature Range
Storage Temperature Range
Supply Voltage
0°C to 70°C / -20°C to 70°C / -40°C to 85°C
-55°C to 125°C
ECL = ±5.2Vdc ±5%
PECL = +5.0Vdc ±5% / +3.3Vdc ±5%
140mA Maximum
Input Current
Frequency Tolerance / Stability
Inclusive of Operating Temperature Range, Supply
Voltage and Load
±100ppm, ±50ppm, ±25ppm, ±10ppm/±20ppm (0°
C to 70°C)
Output Voltage Logic High (Voh)
ECL Output
-1.0Vdc Minimum / -0.7Vdc Maximum
PECL Output
4.0Vdc Minimum / 4.5Vdc Maximum
ECL Output
-1.95Vdc Minimum / -1.6Vdc Maximum
PECL Output
3.0Vdc Minimum / 3.42Vdc Maximum
Rise Time / Fall Time
20% to 80% of Waveform
2nSeconds Maximum
Duty Cycle
@1.4Vdc w/TTL Load
50 ±10% (Standard), 50±5% (Optional)
Load Drive Capability
ECL Output / AA, AB, AM / AC
PECL Output
50 Ohms into -2.0Vdc / 50 Ohms into +3.0Vdc
50 Ohms into +3.0Vdc
Output Voltage Logic Low (Vol)
Aging (@ 25°C)
±5ppm / year Maximum
Start Up Time
20mSeconds Maximum
ECL
PIN CONFIGURATIONS
AA
AB
AM
Pin 1
Ground/
Case
No Connect
or
Comp. Output
No Connect
or
Comp. Output
Pin 7
-5.2V
-5.2V
Case Ground
Pin 8
ECL Output
ECL Output
ECL Output
Pin 14
Ground
Case Ground
-5.2Vdc
A
C
D
E
Pin 1
No
Connect
No
Connect
PECL
Comp. Out
PECL
Comp. Out
Pin 7
Vee
(Case Ground)
Vee
Vee
Vee
(Case Ground)
Pin 8
PECL
Output
PECL
Output
PECL
Output
PECL
Output
Vcc
Vcc
(Case Ground)
Vcc
Vcc
Pin 14
MECHANICAL DIMENSIONS
Marking Guide
7.620
13.2
0.9
±.203
MAX
MAX
20.8
MAX
15.240 14 1
±0.203
8
7
0.457
MAX
Insulated Standoffs
(Glass)
All Dimensions in mm.
TEL 949-366-8700
CALIBER
PART NUMBER
FREQUENCY
DATE CODE
±0.1 (X4)
5.08
14 Pin Full Size
PECL
5.08
MIN
FAX 949-366-8707
Marking Guide
Line 1: Caliber
Line 2: Complete Part Number
Line 3: Frequency in MHz
Line 4: Date Code (Year/Week)
WEB http://www.caliberelectronics.com
Similar pages