Hittite HMC655LP2E Wideband fixed attenuator family, dc - 25 ghz Datasheet

HMC652LP2E to HMC655LP2E
v01.0811
WIDEBAND FIXED ATTENUATOR FAMILY, DC - 25 GHz
HMC652LP2E / HMC653LP2E / HMC654LP2E / HMC655LP2E
Typical Applications
Features
The HMC652LP2E - HMC655LP2E are ideal for:
4 Attenuator Products:
2, 3, 4 & 6 dB Fixed Attenuation Levels
• Fiber Optics
Wide Bandwidth: DC - 25 GHz
• Microwave Radio
Excellent Attenuation Accuracy
• Military & Space
Power Handling: +25 dBm
• Test & Measurement
6 Lead 2x2 mm SMT Package: 4 mm2
• Scientific Instruments
Functional Diagram
General Description
PASSIVES - SMT
12
• RF / Microwave Circuit Prototyping
The HMC652LP2E / 653LP2E / 654LP2E / 655LP2E
are a line of wideband fixed value SMT 50 Ohm
matched attenuators which offer attenuation levels
of 2, 3, 4 and 6 dB respectively. These passive
attenuators are ideal for military, test equipment, and
other wideband applications where extremely flat
attenuation, and excellent VSWR vs. frequency are
required.
These wideband attenuators handle up to +25 dBm
of input power, and are compatible with high volume
surface mount manufacturing techniques.
Electrical Specifications, TA = +25° C, 50 Ohm system
Part Number
Attenuator Value
HMC652LP2E
2 dB
HMC653LP2E
HMC654LP2E
HMC655LP2E
Return Loss (Typical)
Attenuation Tolerance
[1]
Temperature Coefficient (Typicial)
DC - 25
[2]
Units
GHz
22.0
± 0.5
0.0004
dB
3 dB
23.0
± 0.5
0.0006
dB
4 dB
20.5
± 0.5
0.0006
dB
6 dB
16.5
± 0.5
0.0004
dB
[1] Attenuation Tolerance is valid over temperature.
[2] Temperature Coefficient Units are dB/ °C.
12 - 1
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC652LP2E to HMC655LP2E
v01.0811
WIDEBAND FIXED ATTENUATOR FAMILY, DC - 25 GHz
HMC652LP2E / HMC653LP2E / HMC654LP2E / HMC655LP2E
Attenuation vs. Temperature
Return Loss
0
0
HMC652LP2
-5
-3
-4
-5
HMC653LP2
HMC654LP2
-6
-7
HMC655LP2
-8
+25C
+85C
-40C
-9
HMC653LP2E
-10
HMC654LP2E
-15
HMC655LP2E
-20
-25
HMC652LP2E
-30
-10
0
5
10
15
20
0
25
5
10
15
20
25
FREQUENCY (GHz)
FREQUENCY (GHz)
Absolute Maximum Ratings
Part Number
HMC652LP2E
HMC653LP2E
HMC654LP2E
HMC655LP2E
Units
27
26
25
26
dBm
DC Voltage Terminated
5.6
5.2
4.9
5.2
V
DC Voltage Open
5.6
5.1
4.6
6.0
V
RF Input Power (CW)
Storage Temperature
-65 to +150
Operating Temperature
ESD Sensitivity (HBM)
°C
-40 to +85
Class 1A
Class 1A
Class 1A
°C
12
PASSIVES - SMT
ATTENUATION (dB)
-2
RETURN LOSS (dB)
-1
Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
12 - 2
HMC652LP2E to HMC655LP2E
v01.0811
WIDEBAND FIXED ATTENUATOR FAMILY, DC - 25 GHz
HMC652LP2E / HMC653LP2E / HMC654LP2E / HMC655LP2E
Outline Drawing
PASSIVES - SMT
12
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
HMC652LP2E through
HMC655LP2E
RoHS-compliant Low Stress Injection
Molded Plastic
100% matte Sn
MSL Rating
MSL1
[2]
Package Marking [1]
NNN
XXX
[1] 3-Digit lot number XXX
[2] Max peak reflow temperature of 260 °C
Pin Descriptions
12 - 3
Pin Number
Function
Description
1, 3, 4, 6
GND
Package bottom must be connected to RF/DC ground.
2, 5
RF1, RF2
This pin is DC coupled and matched to 50 Ohms.
Use DC Blocking capacitors if the input / output signals
have non-zero DC potential
Interface Schematic
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC652LP2E to HMC655LP2E
v01.0811
WIDEBAND FIXED ATTENUATOR FAMILY, DC - 25 GHz
HMC652LP2E / HMC653LP2E / HMC654LP2E / HMC655LP2E
Evaluation PCB
PASSIVES - SMT
12
List of Materials for Evaluation PCB 119197 [1]
Item
Description
J1 - J2
PCB Mount K Connector
U1
HMC652LP2E through HMC655LP2E
Passive Attenuators
PCB [2]
119194 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the final application should
be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50
ohm impedance and the package ground leads and
exposed paddle should be connected directly to
the ground plane similar to that shown above. The
evaluation circuit board shown above is available
from Hittite Microwave Corporation upon request.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
12 - 4
Similar pages