MACOM MAAPGM0066-DIE Amplifier, power, 2 w 2.5-6.0 ghz Datasheet

Amplifier, Power, 2 W
2.5-6.0 GHz
MAAPGM0066-DIE
Rev C
Preliminary Datasheet
Features
♦ 2.5 Watt Saturated Output Power Level
♦ Variable Drain Voltage (4-10V) Operation
♦ MSAG ® Process
Description
The MAAPGM0066-DIE is a 3-stage 2 W power amplifier with on-chip
bias networks. This product is fully matched to 50 ohms on both the input
and output. It can be used as a power amplifier stage or as a driver stage
in high power applications.
Fabricated using M/A-COM’s repeatable, high performance and highly
reliable GaAs Multifunction Self-Aligned Gate (MSAG™)Process, each
device is 100% RF tested on wafer to ensure performance compliance.
M/A-COM’s MSAG™ process features robust silicon-like manufacturing
processes, planar processing of ion implanted transistors, multiple implant capability enabling power, low-noise, switch and digital FETs on a
single chip, and polyimide scratch protection for ease of use with automated manufacturing processes. The use of refractory metals and the
absence of platinum in the gate metal formulation prevents hydrogen
poisoning when employed in hermetic packaging.
Also Available in:
Primary Applications
♦
♦
♦
♦
Point-to-Point Radios
Point-to-Multipoint Radios
SatCom
Broadband Wireless Access
SAMPLES
Description
Plastic
Sample Board (Die)
Mechanical Sample (Die)
Part Number
MAAP-000066-PKG003
MAAP-000066-SMB004
MAAP-000066-MCH000
Electrical Characteristics: T B = 30°C1, Z0 = 50Ω, VDD = 8V, IDQ = 650mA2, Pin = 6 dBm
Parameter
1
1.
2.
Symbol
Typical
Units
Bandwidth
f
2.5-6.0
GHz
Output Power
POUT
33.5
dBm
1-dB Compression Point
P1dB
33.3
dBm
Small Signal Gain
G
33.5
dB
Power Added Efficiency
PAE
35
%
Input VSWR
VSWR
1.4:1
Output VSWR
VSWR
2.4:1
Output Third Order Intercept
TOI
42
dBm
Output Third Order Intermod,
Pout = 26 dBm (DCL)
IMD3
40
dBc
Gate Current
IGG
10
mA
Drain Current
IDD
810
mA
TB = MMIC Base Temperature
Adjust VGG between –2.6 and –1.2V to achieve specified Idq.
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Amplifier, Power, 2 W
2.5-6.0 GHz
MAAPGM0066-DIE
Rev C
Preliminary Datasheet
Maximum Ratings3
Parameter
Symbol
Absolute Maximum
Units
Input Power
PIN
16.0
dBm
Drain Supply Voltage
VDD
+12.0
V
Gate Supply Voltage
VGG
-3.0
V
Quiescent Drain Current (No RF)
IDQ
1.04
A
Quiescent DC Power Dissipated (No RF)
PDISS
10.4
W
Junction Temperature
TJ
170
°C
Storage Temperature
TSTG
-55 to +150
°C
3. Operation beyond these limits may result in permanent damage to the part.
Recommended Operating Conditions4
Characteristic
Symbol
Min
Typ
Max
Unit
Drain Voltage
VDD
4.0
8.0
10.0
V
Gate Voltage
VGG
-2.6
-2.0
-1.2
V
Input Power
PIN
6.0
13.0
dBm
Thermal Resistance
ΘJC
14.0
MMIC Base Temperature
TB
°C/W
Note 5
°C
4. Operation outside of these ranges may reduce product reliability.
5. MMIC Base Temperature = 170°C — ΘJC* VDD * I DQ
Power Derating Curve, Quiescent (No RF)
12
Operating Instructions
This device is static sensitive. Please handle with
care. To operate the device, follow these steps.
1. Apply VGG = -2.7 V, VDD= 0 V.
Peak Power Dissipation (W)
10
8
6
4
2
2. Ramp VDD to desired voltage, typically 8.0 V.
3. Adjust VGG to set IDQ, (approximately @ –2.0 V).
4. Set RF input.
0
0
20
40
60
80
100
120
140
160
180
MMIC Base Temperature (ºC)
5. Power down sequence in reverse. Turn VGG off
last.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Amplifier, Power, 2 W
2.5-6.0 GHz
MAAPGM0066-DIE
Rev C
Preliminary Datasheet
All Data is at 30ºC MMIC base temperature, CW stimulus, unless otherwise noted.
40
Pout
PAE
40
36
34
35
34
32
30
32
30
25
28
20
26
15
26
24
10
24
22
5
22
0
20
20
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
P1dB (dBm)
38
40
PAE (%)
45
36
38
30
28
6.5
6V
8V
10V
2.0
2.5
3.0
3.5
4.0
Frequency (GHz)
40
40
38
38
36
36
34
34
Psat (dBm)
Psat (dBm)
5.0
5.5
6.0
6.5
Figure 2. 1dB Compression Point and Drain Voltage at IDSQ=650mA
Figure 1. Output Power and Power Added Efficiency
at VD = 8V, Pin = 6dBm, and IDSQ=650mA
32
30
28
32
30
28
26
26
6V
8V
10V
24
22
-25ºC
30ºC
87ºC
24
22
20
20
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
2.0
6.5
2.5
3.0
3.5
40
6
32
5
28
24
4
VSWR
Gain
Input VSWR
Output VSWR
16
3
12
8
2
Output Power (dBm), SSG(dB),
PAE (%)
36
0
1
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
40
1.00
39
0.95
38
0.90
37
0.85
36
0.80
35
0.75
34
0.70
33
0.65
Pout
SSG
PAE
IDS
32
31
4
2.0
4.5
Figure 4. Saturated Output Power and Temperature
at VD =8V and IDSQ=650mA
Figure 3. Saturated Output Power and Drain Voltage at IDSQ=650mA.
20
4.0
Frequency (GHz)
Frequency (GHz)
Gain (dB)
4.5
Frequency (GHz)
5.0
5.5
6.0
6.5
Frequency (GHz)
Figure 5. Small Signal Gain and Input and Output VSWR
at VD = 8V and IDSQ=650mA
3
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
0.60
0.55
30
30
40
50
60
70
80
90
100
110
120
130
140
0.50
150
Junction Temperature (ºC)
Figure 6. Output Power, Small Signal Gain, Power Added Efficiency, and
Drain Current vs. Junction Temperature at 8V, 4 GHz, and IDSQ =650mA
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Drain Current (A)
Pout (dBm)
50
Amplifier, Power, 2 W
2.5-6.0 GHz
MAAPGM0066-DIE
Rev C
Preliminary Datasheet
All Data is at 30ºC MMIC base temperature, CW stimulus, unless otherwise noted.
40
40
38
38
36
34
36
34
30
28
32
Gain (dB)
Output Power (dBm)
32
26
24
22
30
28
3.5 GHz
4 GHz
4.5 GHz
20
18
26
16
3.5 GHz
4 GHz
4.5 GHz
24
14
22
12
10
20
-8
-6
-4
-2
0
2
4
6
8
10
20
22
24
26
28
30
32
34
36
38
Input Power (dBm)
Output Power (dBm)
Figure 7. Output Power vs. Input Power and Frequency at 10V and IDSQ=650mA
Figure 8. Gain vs. Output Power and Frequency at VD=10V and IDSQ=650mA.
40
1.5
50
1.4
45
3.5 GHz
4 GHz
4.5 GHz
40
1.3
1.2
Drain Current (A)
PAE (%)
35
30
25
20
1.1
1.0
0.9
15
0.8
10
0.7
5
0.6
3.5 GHz
4 GHz
4.5 GHz
0.5
0
-8
-6
-4
-2
0
2
4
6
8
-8
10
-6
-4
-2
0
2
4
6
8
Input Power (dBm)
Input Power (dBm)
Figure 9. Power Added Efficiency vs. Input Power and Frequency
at VD=10V and IDSQ=650mA
Figure 10. Drain Current vs. Input Power and Frequency
at VD=10V and I DSQ =650mA
40
10
40
38
38
36
36
34
34
30
28
Gain (dB)
Output Power (dBm)
32
26
24
22
20
3.5 GHz
4 GHz
4.5 GHz
18
16
32
30
28
26
3.5 GHz
4 GHz
4.5 GHz
24
14
22
12
20
10
-8
-6
-4
-2
0
2
4
6
8
10
20
22
24
26
28
30
32
34
36
38
Input Power (dBm)
Output Power (dBm)
Figure 11. Output Power vs. Input Power and Frequency
at VD=8V and I DSQ =650mA
Figure 12. Gain vs. Output Power and Frequency at VD=8V and IDSQ=650mA.
4
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
40
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Amplifier, Power, 2 W
2.5-6.0 GHz
MAAPGM0066-DIE
Rev C
Preliminary Datasheet
All Data is at 30ºC MMIC base temperature, CW stimulus, unless otherwise noted.
1.5
50
1.4
45
3.5 GHz
4 GHz
4.5 GHz
40
1.3
Drain Current (A)
PAE (%)
30
25
20
1.0
0.9
0.8
10
0.7
5
0.6
0.5
-8
-6
-4
-2
0
2
4
6
8
-8
10
-6
-4
-2
0
2
4
6
8
Input Power (dBm)
Input Power (dBm)
Figure 13. Power Added Efficiency vs. Input Power and Frequency
at VD=8V and IDSQ=650mA
Figure 14. Drain Current vs. Input Power and Frequency
at VD=8V and IDSQ=650mA
10
100
50
48
80
70
42
60
IMD3 (dBc)
44
40
38
3 GHz
4 GHz
5 GHz
90
3 GHz
4 GHz
5 GHz
46
TOI (dBm)
1.1
15
0
50
40
36
30
34
20
32
10
0
30
10
12
14
16
18
20
22
10
24
12
14
16
18
20
22
24
Fundamental Output Power, Single Tone (dBm)
Fundamental Output Power per Tone (dBm)
Figure 15. Third Order Intercept vs. Output Power and Frequency at 6V.
Figure 16. Third Order Intermod vs. Output Power and Frequency at 6V.
100
50
46
80
70
42
60
IMD3 (dBc)
44
40
38
3 GHz
4 GHz
5 GHz
90
3 GHz
4 GHz
5 GHz
48
TOI (dBm)
3.5 GHz
4 GHz
4.5 GHz
1.2
35
50
40
36
30
34
20
32
10
0
30
10
12
14
16
18
20
22
24
10
12
14
16
18
20
22
24
Fundamental Output Power, Single Tone (dBm)
Fundamental Output Power per Tone (dBm)
Figure 17. Third Order Intercept vs. Output Power and Frequency at 8V.
Figure 18. Third Order Intermod vs. Output Power and Frequency at 8V.
5
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Amplifier, Power, 2 W
2.5-6.0 GHz
MAAPGM0066-DIE
Rev C
Preliminary Datasheet
All Data is at 30ºC MMIC base temperature, CW stimulus, unless otherwise noted.
50
100
48
70
42
60
IMD3 (dBc)
TOI (dBm)
80
44
40
38
3 GHz
4 GHz
5 GHz
90
3 GHz
4 GHz
5 GHz
46
50
40
36
30
34
20
32
10
0
30
10
12
14
16
18
20
22
24
OFundamental Output Power, Single Tone (dBm)
Figure 19. Third Order Intercept vs. Output Power and Frequency at 10V.
6
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
10
12
14
16
18
20
22
24
Fundamental Output Power per Tone (dBm)
Figure 20. Third Order Intermod vs. Output Power and Frequency at 10V.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Amplifier, Power, 2 W
2.5-6.0 GHz
MAAPGM0066-DIE
Rev C
Preliminary Datasheet
Mechanical Information
Chip Size: 3.000 x 3.150 x 0.075 mm
(118
x 124 x 3 mils)
Chip edge to bond pad dimensions are shown to the center of the bond pad.
Figure 1. Die Layout
Bond Pad Dimensions
Pad
Size (μm)
Size (mils)
RF In and Out
100 x 200
4x8
DC Drain Supply Voltage VDD
200 x 100
8x4
DC Gate Supply Voltage VGG
100 x 100
4x4
7
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Amplifier, Power, 2 W
2.5-6.0 GHz
MAAPGM0066-DIE
Rev C
Preliminary Datasheet
Assembly
VDD
100 pF
0.1 F
RFOUT
RFIN
VGG
100 pF
0.1 F
Figure 2. Recommended operational configuration. Wire bond as shown.
Assembly Instructions:
Die attach: Use AuSn (80/20) 1 mil. preform solder. Limit time @ 300 °C
to less than 5 minutes.
Wirebonding: Bond @ 160 °C using standard ball or thermal compression wedge bond techniques. For DC pad connections, use either ball or
wedge bonds. For best RF performance, use wedge bonds of shortest
length, although ball bonds are also acceptable.
Biasing Note: Must apply negative bias to VGG before applying positive bias to VDD to prevent
8
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Similar pages