A Product Line of Diodes Incorporated DMN2300UFB 20V N-CHANNEL ENHANCEMENT MODE MOSFET Product Summary Features and Benefits V(BR)DSS RDS(on) ID max TA = +25°C 20V 175mΩ @ VGS= 4.5V 240mΩ @ VGS= 2.5V 360mΩ @ VGS= 1.8V 1.30A 1.11A 0.91A Footprint of just 0.6mm2 – thirteen times smaller than SOT23 0.5mm profile – ideal for low profile applications On resistance <200mΩ @ VGS = 4.5V Low Gate Threshold Voltage Fast Switching Speed Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) ESD Protected Gate 2KV Qualified to AEC-Q101 Standards for High Reliability Description and Applications Mechanical Data This MOSFET is designed to minimize the on-state resistance (RDS(on)) and yet maintain superior switching performance, making it Case: X1-DFN1006-3 Case Material: Molded Plastic, “Green” Molding Compound; UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish – NiPdAu over Copper Leadframe; Solderable per MIL-STD-202, Method 208 e4 ideal for high efficiency power management applications. Load Switch Weight: 0.001 grams (Approximate) Drain X1-DFN1006-3 Body Diode S Gate D G ESD PROTECTED TO 2kV Bottom View Top View Internal Schematic Gate Protection Diode Source Equivalent Circuit Ordering Information (Note 4) Part Number DMN2300UFB-7 DMN2300UFB-7B Notes: Marking NI NI Reel size (inches) 7 7 Tape width (mm) 8 8 Quantity per reel 3,000 10,000 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packaging details, go to our website at http://www.diodes.com/products/packages.html. DMN2300UFB Document number: DS35235 Rev. 2 - 2 1 of 8 www.diodes.com June 2015 © Diodes Incorporated A Product Line of Diodes Incorporated DMN2300UFB Marking Information From date code 1527 (YYWW), this changes to: NI NI Top View Bar Denotes Gate and Source Side Top View Dot Denotes Drain Side NI NI NI NI NI NI DMN2300UFB-7 NI Top View Bar Denotes Gate and Source Side NI = Part Marking Code DMN2300UFB Document number: DS35235 Rev. 2 - 2 NI NI NI DMN2300UFB-7B 2 of 8 www.diodes.com June 2015 © Diodes Incorporated A Product Line of Diodes Incorporated DMN2300UFB Maximum Ratings (@TA = +25°C unless otherwise specified.) Characteristic Drain-Source Voltage Gate-Source Voltage Continuous Drain Current Symbol VDSS VGSS Value 20 ±8 Unit V V ID 1.32 0.94 1.78 A IDM 8 A Value 0.468 1.2 267 104 -55 to +150 Unit W W °C/W °C/W °C TA = +25°C (Note 5) TA = +85°C (Note 5) TA = +25°C (Note 6) Steady State Pulsed Drain Current (Note 7) Thermal Characteristics (@TA = +25°C unless otherwise specified.) Characteristic Power Dissipation (Note 5) Power Dissipation (Note 6) Thermal Resistance, Junction to Ambient (Note 5) Thermal Resistance, Junction to Ambient (Note 6) Operating and Storage Temperature Range Electrical Characteristics Symbol PD PD RθJA RθJA TJ, TSTG (@TA = +25°C unless otherwise specified.) Characteristic OFF CHARACTERISTICS (Note 8) Drain-Source Breakdown Voltage Zero Gate Voltage Drain Current TJ = +25°C Gate-Source Leakage ON CHARACTERISTICS (Note 8) Gate Threshold Voltage Symbol Min Typ Max Unit BVDSS IDSS IGSS 20 - - 1 10 V µA µA VGS(th) RDS (ON) |Yfs| VSD 0.7 0.95 175 240 360 1.2 V Static Drain-Source On-Resistance 0.45 40 - Ciss Coss Crss Rg Qg Qgs Qgd tD(on) tr tD(off) tf - 67.62 9.74 7.58 68.51 0.89 0.14 0.16 4.92 6.93 21.71 10.62 - Forward Transfer Admittance Diode Forward Voltage DYNAMIC CHARACTERISTICS Input Capacitance Output Capacitance Reverse Transfer Capacitance Gate Resistance Total Gate Charge Gate-Source Charge Gate-Drain Charge Turn-On Delay Time Turn-On Rise Time Turn-Off Delay Time Turn-Off Fall Time Notes: mΩ mS V pF pF pF Ω nC nC nC ns ns ns ns Test Condition VGS = 0V, ID = 10μA VDS = 20V, VGS = 0V VGS = ±8V, VDS = 0V VDS = VGS, ID = 250μA VGS = 4.5V, ID = 300mA VGS = 2.5V, ID = 250mA VGS = 1.8V, ID = 100mA VDS = 3V, ID = 30mA VGS = 0V, IS = 300mA VDS = 20V, VGS = 0V, f = 1.0MHz VDS = 0V, VGS = 0V, f = 1MHz VGS = 4.5V, VDS = 10V, ID = 1A VDS = 10V, ID = 1A VGS = 4.5V, RG = 6Ω 5. Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout. 6. Device mounted on FR-4 substrate PC board, 2oz copper, with 25mm X 25mm square copper plate. 7. Device mounted on minimum recommended pad layout test board, 10µs pulse duty cycle = 1%. 8. Short duration pulse test used to minimize self-heating effect. DMN2300UFB Document number: DS35235 Rev. 2 - 2 3 of 8 www.diodes.com June 2015 © Diodes Incorporated A Product Line of Diodes Incorporated DMN2300UFB 2.0 2.0 VGS = 4.5V VDS = 5V VGS = 2.5V VGS = 1.8V ID, DRAIN CURRENT (A) ID, DRAIN CURRENT (A) VGS = 2.0V 1.5 VGS = 1.5V 1.0 0.5 1.5 1.0 TA = 150°C 0.5 TA = 125°C VGS = 1.2V TA = 85°C TA = 25°C TA = -55°C 0 1 2 3 4 VDS, DRAIN-SOURCE VOLTAGE (V) Fig. 1 Typical Output Characteristic 0.4 0.3 0.2 VGS = 2.5V VGS = 4.5V 0.1 0 0 0.4 0.8 1.2 1.6 ID, DRAIN-SOURCE CURRENT (A) Fig. 3 Typical On-Resistance vs. Drain Current and Gate Voltage VGS = 2.5V ID = 500mA 1.2 1.0 0.8 -25 0 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (°C) Fig. 5 On-Resistance Variation with Temperature DMN2300UFB Document number: DS35235 Rev. 2 - 2 4 of 8 www.diodes.com 0.5 1 1.5 2 2.5 VGS, GATE-SOURCE VOLTAGE (V) Fig. 2 Typical Transfer Characteristic 3 0.8 VGS = 4.5V 0.6 0.4 TA = 125°C TA = 150°C 0.2 TA = 85°C TA = 25°C TA = -55°C 0 0 RDSON, DRAIN-SOURCE ON-RESISTANCE () RDSON, DRAIN-SOURCE ON-RESISTANCE (NORMALIZED) VGS = 4.5V ID = 1.0A 0.6 -50 0 2 1.6 1.4 0 5 RDS(ON), DRAIN-SOURCE ON-RESISTANCE () RDS(ON), DRAIN-SOURCE ON-RESISTANCE () 0 0.25 0.5 0.75 1 1.25 1.5 1.75 ID, DRAIN CURRENT (A) Fig. 4 Typical On-Resistance vs. Drain Current and Temperature 2 0.8 0.6 0.4 VGS = 2.5V ID = 500mA 0.2 VGS = 4.5V ID = 1.0A 0 -50 -25 0 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (°C) Fig. 6 On-Resistance Variation with Temperature June 2015 © Diodes Incorporated A Product Line of Diodes Incorporated DMN2300UFB 2.0 VGS(TH), GATE THRESHOLD VOLTAGE (V) 1.2 1.0 IS, SOURCE CURRENT (A) 1.6 ID = 1mA 0.8 0.6 ID = 250µA 0.4 1.2 TA = 25°C 0.8 0.4 0.2 0 0 -50 -25 0 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (°C) Fig. 7 Gate Threshold Variation vs. Ambient Temperature 1,000 0 0.2 0.4 0.6 0.8 1.0 V SD, SOURCE-DRAIN VOLTAGE (V) Fig. 8 Diode Forward Voltage vs. Current 1.2 100,000 IGSS, LEAKAGE CURRENT (nA) IDSS, LEAKAGE CURRENT (nA) T A = 125°C 100 T A = 85°C 10 TA = 25°C TA = -55°C 1 2 4 6 8 10 12 14 16 18 VDS, DRAIN-SOURCE VOLTAGE (V) Fig. 9 Typical Leakage Current vs. Drain-Source Voltage 10,000 20 TA = 150°C TA = 125°C 1,000 TA = 85°C TA = 25°C 100 TA = -55°C 10 1 2 4 6 8 10 12 VGS, GATE-SOURCE VOLTAGE (V) Fig.10 Leakage Current vs. Gate-Source Voltage VGS, GATE-SOURCE VOLTAGE (V) 8 VDS = 15V ID = 1A 6 4 2 0 0 0.5 1 1.5 2 2.5 Qg, TOTAL GATE CHARGE (nC) Fig. 11 Gate-Charge Characteristics DMN2300UFB Document number: DS35235 Rev. 2 - 2 3 5 of 8 www.diodes.com June 2015 © Diodes Incorporated A Product Line of Diodes Incorporated DMN2300UFB r(t), TRANSIENT THERMAL RESISTANCE 1 D = 0.7 D = 0.5 D = 0.3 0.1 D = 0.1 D = 0.9 D = 0.05 RJA (t) = r(t) * R JA RJA = 262°C/W D = 0.02 0.01 D = 0.01 P(pk) t2 TJ - TA = P * RJA(t) Duty Cycle, D = t 1/t2 D = 0.005 D = Single Pulse 0.001 0.00001 0.0001 DMN2300UFB Document number: DS35235 Rev. 2 - 2 t1 0.001 0.01 0.1 1 t1, PULSE DURATION TIME (s) Fig. 12 Transient Thermal Response 6 of 8 www.diodes.com 10 100 1,000 June 2015 © Diodes Incorporated A Product Line of Diodes Incorporated DMN2300UFB Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. A A1 Seating Plane D b Pin #1 ID e E b2 X1-DFN1006-3 Dim Min Max Typ A 0.47 0.53 0.50 A1 0.00 0.05 0.03 b 0.10 0.20 0.15 b2 0.45 0.55 0.50 D 0.95 1.075 1.00 E 0.55 0.675 0.60 e 0.35 L1 0.20 0.30 0.25 L2 0.20 0.30 0.25 L3 0.40 z 0.02 0.08 0.05 All Dimensions in mm z L3 L2 L1 Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. C Y Dimensions C G1 G2 X X1 Y Y1 Y1 G2 X Value (in mm) 0.70 0.30 0.20 0.40 1.10 0.25 0.70 G1 X1 DMN2300UFB Document number: DS35235 Rev. 2 - 2 7 of 8 www.diodes.com June 2015 © Diodes Incorporated A Product Line of Diodes Incorporated DMN2300UFB IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2015, Diodes Incorporated www.diodes.com DMN2300UFB Document number: DS35235 Rev. 2 - 2 8 of 8 www.diodes.com June 2015 © Diodes Incorporated