Sensortechnics HCL0075D Miniature compensated low pressure sensor Datasheet

HCL Series
Miniature compensated low pressure sensors
FEATURES
· 0 ... 5 to 0 ... 75 mbar,
differential or gage
· Calibrated and temperature
compensated
· Matched pressure port volumes
· Miniature SMT and SIL housings
· RoHS compliant
· Sensortechnics PRO services
SPECIFICATIONS
EQUIVALENT CIRCUIT
Maximum ratings
Supply voltage VS
16 VDC
Lead specifications
Average preheating temperature gradient 2.5 K/s
Soak time
ca. 3 min
Time above 217°C
50 s
Time above 230°C
40 s
Time above 250°C
15 s
Peak temperature
260°C
Cooling temperature gradient
-3.5 K/s
Temperature ranges
Compensated
HCL0005..., HCL12x5...
all others
Operating
Storage
0 ... 50°C
0 ... 70°C
-25 ... 85°C
-40 ... 125°C
Humidity limits (non-condensing)
0 ... 95 %RH
E / 11628 / A
+Vs
3
-Vout
+Vout
4
2
1
-Vs
1/10
www.sensortechnics.com
HCL Series
Miniature compensated low pressure sensors
PRESSURE SENSOR CHARACTERISTICS
Part no.
Operating pressure
Proof pressure5,8
Burst pressure6,8
HCL0005...
0...5 mbar
250 mbar
500 mbar
HCL12X5...
0...12.5 mbar
250 mbar
500 mbar
HCL0025...
0...25 mbar
500 mbar
750 mbar
HCL0050...
0...50 mbar
750 mbar
1200 mbar
HCL0075...
0...75 mbar
1200 mbar
2000 mbar
PERFORMANCE CHARACTERISTICS
(Vs = 12 V, TA = 25 °C, pressure applied to high pressure port)
HCL0005...
Characteristics
Min.
Nom.
4
Zero pressure offset
Max.
Units
±0.5
3,4
Full scale span
5.0 mbar
9.0
10.0
11.0
10.0 mbar
18.0
20.0
22.0
±0.05
±0.25
±100
±250
Combined non-linearity and hysteresis2
7
Temperature effects (0 to 50°C)
Offset
Span at 5.0 mbar
mV
%FS
±200
1
±100
Offset warm-up shift
Offset position sensitivity (±1g)
±15
±50
Offset long term drift (one year)
±80
±200
Input resistance
4.5
Output resistance
1.5
µV
kΩ
Specification notes:
1. Shift is within in the first hour of excitation.
2. Non-linearity refers to the Best Straight Line fit, measured for offset pressure, full scale pressure and 1/2 full scale pressure.
3. Full scale span is the algebraic difference between the output voltage at full scale pressure and the output voltage at zero
pressure.
4. Zero pressure offset and span are ratiometric to the supply voltage.
5. Proof pressure is the maximum pressure which may be applied without causing durable shifts of the electrical parameters
of the sensing element.
6. Burst pressure is the maximum pressure which may be applied to one pressure port relative to the other port without causing
leaks to the sensor.
7. Shifts are relative to 25°C.
8. The common mode pressure for the HCL series is 2 bar. Common mode pressure is the maximum pressure that can be
applied to both ports of a differential pressure sensor simultaneously without damaging the sensor housing.
E / 11628 / A
2/10
www.sensortechnics.com
HCL Series
Miniature compensated low pressure sensors
PERFORMANCE CHARACTERISTICS (cont.)
(Vs = 12 V, TA = 25 °C, pressure applied to high pressure port)
HCL12X5...
Characteristics
Min.
Nom.
Zero pressure offset4
Max.
±0.5
3,4
19.0
Full scale span
Combined non-linearity and hysteresis2
7
Temperature effects (0 to 50°C)
20.0
21.0
±0.05
±0.25
Offset
±150
Span
±200
Offset warm-up shift1
±50
Offset position sensitivity (±1g)
±10
Offset long term drift (one year)
±100
Input resistance
4.5
Output resistance
1.5
Units
mV
%FS
µV
kΩ
HCL0025...
Characteristics
Min.
Nom.
Zero pressure offset4
±0.5
3,4
19.0
Full scale span
Combined non-linearity and hysteresis2
Temperature effects (0 to 70°C)7
Max.
20.0
21.0
±0.05
±0.25
Offset
±150
Span
±200
1
Offset warm-up shift
±50
Offset position sensitivity (±1g)
±5
Offset long term drift (one year)
±100
Input resistance
4.5
Output resistance
1.5
E / 11628 / A
Units
mV
%FS
µV
kΩ
3/10
www.sensortechnics.com
HCL Series
Miniature compensated low pressure sensors
PERFORMANCE CHARACTERISTICS (cont.)
(Vs = 12 V, TA = 25 °C, pressure applied to high pressure port)
HCL0050...
Characteristics
Min.
Nom.
Zero pressure offset4
Max.
±0.5
3,4
19.0
Full scale span
Combined non-linearity and hysteresis2
7
Temperature effects (0 to 70°C)
20.0
21.0
±0.05
±0.25
Offset
±150
Span
±200
1
Offset warm-up shift
±50
Offset position sensitivity (±1g)
±5
Offset long term drift (one year)
±100
Input resistance
4.5
Output resistance
1.5
Units
mV
%FS
µV
kΩ
HCL0075...
Characteristics
Min.
Nom.
4
Zero pressure offset
±0.5
3,4
19.0
Full scale span
Combined non-linearity and hysteresis2
Temperature effects (0 to 70°C)7
Max.
20.0
21.0
±0.05
±0.25
Offset
±150
Span
±200
1
Offset warm-up shift
±50
Offset position sensitivity (±1g)
±5
Offset long term drift (one year)
±100
Input resistance
4.5
Output resistance
1.5
E / 11628 / A
Units
mV
%FS
µV
kΩ
4/10
www.sensortechnics.com
HCL Series
Miniature compensated low pressure sensors
PHYSICAL DIMENSIONS AND ELECTRICAL CONNECTIONS
HCL...D...
6.70
Package: dual port, same side
3
12.70
1.90
Connection
1
-Vs
3
10.70
16
Pin
10.30
6.50
9.50
2
Bottom view
2
+Vout
3
+Vs
4
-Vout
0.25
4 3 2 1
1.45
4.50
0.51
2.54
10.70
1.90
HIGH PRESSURE PORT
third angle projection
LOW PRESSURE PORT
3
dimensions in mm
4.20
HCL...E...
Package: SMD dual port, same side
12.70
Bottom view
4.50
6.50
1.28
16
3
5 6 7 8
4 3 2 1
4.06
Connection
1
-Vs
2
+Vout
3
+Vs
4
-Vout
5
10.70
HIGH PRESSURE PORT
Pin
6
4.20
3
7
N/C
LOW PRESSURE PORT
6.70
3
1.90
2
8
0.46
2.54
third angle projection
dimensions in mm
E / 11628 / A
5/10
www.sensortechnics.com
HCL Series
Miniature compensated low pressure sensors
PHYSICAL DIMENSIONS AND ELECTRICAL CONNECTIONS (cont.)
HCL...G...
Package: single port
3.70
Top view
3
12.70
Pin
Connection
1
-Vs
10.30
9.50
16
10.70
2
1.90
2
+Vout
3
+Vs
4
-Vout
1 2 34
0.51
2.54
0.25
1.90
1.45
third angle projection
10.70
HIGH PRESSURE PORT
3
dimensions in mm
4.20
HCL...H...
Package: SMD single port
Top view
12.70
8 7 6 5
Connection
1
-Vs
2
+Vout
1.28
4.06
9.50
16
2
Pin
3
+Vs
1 2 3 4
4
-Vout
10.70
5
6
7
2.54
HIGH PRESSURE PORT
8
3.70
3
1.90
0.46
N/C
third angle projection
3
4.20
E / 11628 / A
dimensions in mm
6/10
www.sensortechnics.com
HCL Series
Miniature compensated low pressure sensors
HOUSING OPTIONS
Different housing options are available on request. Please contact Sensortechnics.
Dual port, opposite side (HCL...P...)
6.70
3
12.70
Bottom view
1.90
10.70
10.30
9.50
2
16
Pin
4 3 2 1
Connection
1
-Vs
2
+Vout
3
+Vs
4
-Vout
0.25
0.51
1.45
2.54
10.70
1.90
HIGH PRESSURE PORT
third angle projection
LOW PRESSURE PORT
dimensions in mm
3
4.20
SMD dual port, opposite side (HCL...Q...)
12.70
Bottom view
1.28
9.50
16
2
5 6 7 8
4 3 2 1
4.06
10.70
Pin
Connection
1
-Vs
2
+Vout
3
+Vs
4
-Vout
5
6
4.20
7
3
LOW PRESSURE PORT
N/C
8
0.46
2.54
E / 11628 / A
6.70
1.90
3
HIGH PRESSURE PORT
third angle projection
dimensions in mm
7/10
www.sensortechnics.com
HCL Series
Miniature compensated low pressure sensors
HOUSING OPTIONS (cont.)
Different housing options are available on request. Please contact Sensortechnics.
Dual port, top side (HCL...T...)
12.70
Bottom view
6.70
7.85
4.85
3
2
10.30
16
10.70
4.20
3
1.90
4 3 2 1
Pin
Connection
1
-Vs
2
+Vout
3
+Vs
4
-Vout
0.25
0.51
1.45
2.54
HIGH PRESSURE PORT
1.90
10.70
third angle projection
LOW PRESSURE PORT
E / 11628 / A
dimensions in mm
8/10
www.sensortechnics.com
HCL Series
Miniature compensated low pressure sensors
HOUSING OPTIONS (cont.)
Different housing options are available on request. Please contact Sensortechnics.
Barbed pressure ports
Ø 2.20 ±0.1
12.70
4.67
00
7.
5 6 7 8
16
Ø 3.0 ±0.1
Bottom view
Ø 2.20 ±0.1
(Available for all housing styles. Sample package shown: SMD dual port, same side)
10.70
4.0
5.21
6.87
3,12
HIGH PRESSURE PORT
2.0
4 3 2 1
2.50 ±0.2
5 ±0.2
third angle projection
LOW PRESSURE PORT
2.54
0.46
dimensions in mm
Dual Inline Packages (DIP)
(Available for all housing styles. Sample package shown: DIP dual port, same side)
12.70
Bottom view
4.50
6.50
16.0
16.25
3.0
5 6 7 8
4 3 2 1
9.0
10.70
6.70
2.0
third angle projection
LOW PRESSURE PORT
2.54
E / 11628 / A
0.46
5.60
1.90
3.0
3.0
4.20
HIGH PRESSURE PORT
dimensions in mm
9/10
www.sensortechnics.com
HCL Series
Miniature compensated low pressure sensors
ORDERING INFORMATION
Series
Options
HCL
Pressure range
Housing
0005
5 mbar
D
Diff SIL same side
12X 5
12.5 mbar
E
Diff SMD same side
0025
25 mbar
G
Gage SIL
0050
50 mbar
H
Gage SMD
0075
75 mbar
(P)
Diff SIL opposite side
(Q)
Diff SMD opposite side
(T)
Diff SIL same top side
Housings P, Q, T available on request. Please
contact Sensortechnics.
Example:
HCL
0005
D
Custom specific pressure ranges and sensor modifications are widely available:
· barbed pressure ports
· Dual inline packages (DIP)
... etc.
Please contact your nearest Sensortechnics sales office for further information.
Sensortechnics PRO services:
· Extended guarantee period of 2 years
· Custom product modifications and adaptations even for small quantities
· Advanced logistics models for supply inventory and short delivery times
· Technical support through application engineers on the phone or at your site
· Traceability of each sensor through serial numbers on request
· No product specification changes without customer notification
· No product obsolescence without very early prior notice
· Fastest possible technical response for design and QA engineers
· Long term product availability for your spares and service needs
... plus other services on request
Sensortechnics reserve the right to make changes to any products herein. Sensortechnics do not assume any liability arising out of the
application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.
E / 11628 / A
10/10
www.sensortechnics.com
Similar pages