ES2AA thru ES2MA Super Fast Surface Mount Rectifiers Reverse Voltage 50 to 1000 Volts Forward Current 2.0 Amperes Features Glass passivated chip Super fast switching for high efficiency For surface mounted applications Low forward voltage drop and high current capability Low reverse leakage current Plastic material has UL flammability classification 94V-0 Mechanical Data Case : Molded plastic Polarity : Indicated by cathode band Weight : 0.002 ounce, 0.064 gram Maximum Ratings and Electrical Characteristics Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbols ES 2AA ES 2B A ES 2C A ES 2D A ES 2FA ES 2GA Maximum repetitive peak reverse voltage VRRM 50 100 150 200 300 400 Maximum RMS voltage VRMS 35 70 105 140 210 280 Maximum DC blocking voltage V DC 50 100 150 200 300 400 600 Parameter Maximum average forward rectified current ES 2JA ES 2K A ES 2MA 600 800 1000 Volts 420 560 700 Volts 800 1000 Volts Units I(AV) 2.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 50.0 Amps Maximum instantaneous forward voltage @ 2.0A DC VF Maximum DC reverse current at rated DC blocking voltage @TL=110oC @ TJ=25oC @ TJ=125oC 0.92 1.25 1.7 Volts IR 5.0 350 uA uA Maximum reverse recovery time (Note 1) trr 25 nS Typical junction capacitance (Note 2) CJ 25 Typical thermal resistance (Note 3) Operating junction temperature range Storage temperature range Notes: pF o RθJL 20 TJ -55 to +150 o C -55 to +150 o C TSTG 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. Thermal Resistance junction to Lead. 241 C/W RATINGS AND CHARACTERISTIC CURVES 242