THICK FILM CHIP RESISTORS AND JUMPERS MC SERIES 50mW (0201) to 3W (2040) ZC SERIES Zero-ohm chip (1A - 25A) RoHS L Term.W is RoHS compliant & 260°C compatible RESISTORSCAPACITORSCOILSDELAY LINES T t W Industry’s widest selection & lowest prices0.1Ω to 22M, 50mW to 3W, 0.25% to 5%, TC’s to 50ppm 0402, 0603, 0805, 1206 sizes heavily stocked in 1% & 5% (other sizes available from stock in many popular values) Option V: +175° operating temperature Option U: User-trimmable chips Option P: Increased pulse capability Military screening, custom values & TC, microwave design, etc. Std TC 2 RCD Type Wattage Resis. Range ppm/°C, MC, ZC Rating 1 ±0.5% Tol2 typ. 2 10Ω to 22KΩ 22.1K to 1MΩ .05W 200 400 100 0402 Stock item .063W 200 400 100 200 400 100 0805 Stock item 1 100 0201 0603 Stock item .1W .125W 1206 Stock item 1206B .25W 1210 .33W 2010 .75W 2512 2512B 1.0W 2.0W 2040 2.0/3.0* .50W Standard Resis. Range ±1% Tol 2 RCD’s Series MC resistors utilize precision thick film technology offering inherently low inductance, exceptional reliability and superior performance. Heavy plating with NO LEACHTM nickel barrier assures superb solderability and long shelf life. State-of-the-art production line enables the industry’s most precise accuracies (0.25% & 50ppm!) thereby replacing more costly thin-film chips in many applications. RCD offers low cost offshore assembly of SM and leaded PCB’s (refer to RCD’s Assembly Services p.114 for more information). Standard Resis. Range ±5% Tol 2 MC Voltage Rating 2 10Ω to 1MΩ 1- 9.1Ω ,1.1M- 2.2M 25V 1 Amp Max. .024±.002 .012±.002 .010±.002 .006±.002 50mΩ Max. [0.6±.03] [.3±.03] [.25±.03] [.15±.05] 10Ω to 1MΩ 1- 9.1Ω ,1.1M- 4.7M 50V 1 Amp Max. .040±.004 .020±.004 .014±.004 .010±.004 50mΩ Max. [1.00±.1] [.5±.1] [.35±.1] [.25±.1] 10Ω to 1MΩ 1- 9.1Ω ,1.1M- 10M 50V 1.5 Amp .061±.005 .031±.004 .016±.006 .010±.006 Max. [1.55±.12] [.8±.1] [.40±.15] [.25±.15] 50mΩ Max. 10Ω to 1MΩ 0.1-9.1Ω, 1.1M-20M 150V 2 Amp Max. .079±.005 .050±.006 .020±.006 .016±.008 50mΩ Max. [2.0±.15] [1.25±.15] [.50±.15] [.4±.2] 10Ω to 5.6MΩ 0.1-9.1Ω, 6.2M-22M 200V 2 Amp Max. .126±.008 .061±.006 .024±.006 .020±.008 50mΩ Max. [3.2±.2] [1.55±.15] [.61±.15] [.51±.2] 10Ω to 5.6MΩ 0.1-9.1Ω, 6.2M-22M 200V 3 Amp Max. .126±.008 .098±.008 .024±.008 .020±.010 50mΩ Max. [3.2±.2] [2.5±.2] [.6±.2] [.5±.25] 10Ω to 1MΩ 10Ω to 1M 10Ω to 1M 200 400 100 200 400 100 200 400 100 200 400 100 200 400 100 10Ω to 1M 10Ω to 1M 10Ω to 1M 10Ω to 1M 1Ω to 9.76Ω 10Ω to 1MΩ 1Ω to 9.76Ω 10Ω to 1MΩ 0.1-9.76Ω, 1.02M-10M 10Ω to 1MΩ 1.02M to 5.6M 0.1-9.76Ω, 5.62M-10M 10Ω to 1MΩ 1.02M to 5.6M 0.1-9.76Ω, 5.62M-10M 10Ω to 1MΩ 1.02M to 5.6M 0.1-9.76Ω, 5.62M-10M 10Ω to 1MΩ 1.02M to 5.6M 0.1-9.76Ω, 5.62M-10M 10Ω to 1MΩ 10Ω to 5.6MΩ 0.1-9.1Ω, 6.2M-22M 10Ω to 5.6MΩ 0.1-9.1Ω, 6.2M-22M 10Ω to 1MΩ 1- 9.1Ω 200 400 200V ( 250V Opt. P) 250V ( 350V Opt. P) 350V Dimensions Inch [mm] TYPE ZC Jumper 3 L W T t 3 Amp Max. .197±.008 .102±.008 .024±.008 .020±.010 50mΩ Max. [5.0±.2] [2.6±.2] [.6±.2] [.50±.25] 4 Amp Max. .250±.01 .125±.010 .024±.008 .026±.012 50mΩ Max. [6.35±.25] [3.2±.25] [.6±.2] [.65±.3]4 N/A .201±.008 .402±.008 .024±.008 .055±.018 [5.1±.2] [10.2±.2] [.6±.2] [1.4±.46] Operation at or near full rated power (especially >1W) involves consideration of mounting geometry (solder pad and trace area/thickness, etc.). Request FA2623 for suggested mounting pad layouts. Extended resistance range available. Most sizes available down to 0.01Ω 1%. 3 Up to 25A available. 4 Dim. t on MC2512B is .094[2.4] maximum. PULSE WITHSTAND CHART (increased pulse levels avail.) TYPICAL PERFORMANCE P/N DESIGNATION: 500 0.2% ∆R 1% ∆R 0.2% ∆R 0.5% ∆R 0.2% ∆R 0.5% ∆R 1.0% ∆R -55 to +155°C Derate W & V by 1.18%/°C MC 1206 - 2210 - F T RCD Type: MC or ZC Chip Size: 0201 to 2040 Options: U, P, etc. (leave blank if std) Resis. Code 0.25% to 1% Tol: 3 signif. digits & multiplier (R100= .1Ω, 1R00=1Ω, 10R0=10Ω, 1000=100Ω, 1001=1KΩ) 5% Tol: 2 signif. digits & multiplier (R10=.1Ω, 1R0=1Ω, 100=10Ω, 101=100Ω, 102=1KΩ). Leave blank on ZC zero-ohm chips. Tolerance:J=5%, F=1%, D=0.5%, C=0.25% Leave blank on ZC zero-ohm chips. Opt.U trimmable chips W=±15%, M=±20%, U=0 to -30%. Packaging: B=Bulk, T=Tape & Reel Optional TC: 50=50ppm, 101=100ppm, 201=200ppm (leave blank if std) Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable) Peak Power (Watts) Thermal Shock (-55° to +125°C) Overload (2.5x W, 5S, NTE 2x rated V) Low Temp. Operation (-55°C) High Temp. Exposure (125°C, 100hrs) Resistance to Solder Heat Moisture Resistance Load Life(1000 hrs.) Operating Temp. (+175°C Opt. V) Derating (above 70°C) 100 MC2512P MC2010P MC1210P MC1206P MC0805P MC0603P MC0402P 10 W 1 1uS 10uS 100uS 1mS 10mS 100mS Pulse Duration Pulse capability is dependent on res. value, waveform, repetition, etc. Chart is a general guide for Opt. P version, single or infrequent pulses, with peak voltage levels not exceeding 150V for 0402 & 0603 size, 300V for 0805, 400V for 1206 & 1210, 450V for 2010 & 2512. Max pulse wattage for standard parts (w/o Opt.P) is 50% less, max pulse voltage is 50V less. Increased pulse levels available. For improved performance and reliability, pulse derating factor is recommended (30-50% typ., refer to #R-42). Verify selection by evaluating under worst-case conditions. RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:[email protected] FA033F Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 16