Card Connectors Series CN015 - Type 30 Direct Mounting, Self Tapping Screw (w/o Ejector) Part Number (Details) Specifications Insulation Resistance: Withstanding Voltage: Contact Resistance: Voltage Rating: Current Rating: Operating Temp. Range: 1,000MΩ min. at 500V DC 500V AC rms for 1 minute 40mΩ max. (initial resistance) excluding conductor resistance of terminal (25mΩ) 250V AC 0.5A –20°C to +60°C CN015 RZ - 30 1 2 - * Series No. RZ = 3.3V for SmartMedia Card (3.3V) Type 30 Materials and Finish PCB Mounting: 2 = Self Tapping Screw (Screw ∅1.7mm See Note 1) Contact: PB / Ni-Au Insulator Base: PA, black Height of Stand-off: ***) 0 = A(0.30mm), B(4.00mm), C(2.00mm) 2 = A(2.00mm), B(5.70mm), C(3.70mm) Features SMT type terminals Acceptable for automation mounting machine Space saving design and low profile 4.0mm design ***) Dimensions A, B and C are shown in drawings below. Recommended PCB Layout Type 30 with Self Tapping Screw (CN015RZ-3012-0) (CN015RZ-3012-0) Top View PCB Mounting: Type 2 (Self Tapping) = ∅1.44 (Self Tapping) Recommended PCB Layout Type 30 with Self Tapping Screw (CN015RZ-3012-2) (CN015RZ-3012-2) Dimensions for CN015RZ-3012-2 are the same as above only the self tapping srew hole distance is different and 2.00mm stand-off Card Insertion Details Info: The Switch should be open when card is not inserted, and should be closed when card is inserted Note 1: Use self tapping screw from the back side of 1.7mm or more (PCB thickness +2.0mm). – Binding torque 1.28gfcm (0.118N . m) or less – Repeated binding number = 5 times or less Function Table Part Number CN015RZ-3012-0 CN015RZ-3012-2 Connectors Voltage of SmartMedia 3.3V Ejector Mis-insertion Protection No No Sequential Contact Write Protection Switch Yes SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Yes Card Connectors Series CN015 - Type 30 Direct Mounting, SMT Fixing (w/o Ejector) Specifications Part Number (Details) 1,000MΩ min. at 500V DC 500V AC rms for 1 minute 40mΩ max. (initial resistance) excluding conductor resistance of terminal (25mΩ) 250V AC 0.5A –20°C to +60°C CN015 *Z - 30 1 3 - * Series No. Applications: RZ = 3.3V for SmartMedia Card (3.3V) PZ = 3.3V / 5V for SmartMedia Card (3.3V) and (5V) Type 30 Materials and Finish Contact: PB / Ni-Au Insulator Base: PA, black PCB Mounting: 3 = SMT Fixing Metal Pads Height of Stand-off: ***) 0 = A(0.30mm), B(4.00mm), C(2.00mm) 2 = A(2.00mm), B(5.70mm), C(3.70mm) Features Acceptable for mounting other components under stand-off of connector Acceptable for automation mounting machine Space saving design and low profile 4.0mm design SMT type terminals ***) Dimensions A, B and C are shown in drawings below. Recommended PCB Layout Type 30 with SMT Metal Pads (3.3V and 3.3V/ 5V) Top View see note 1 see note 1 Info: The Switch should be open when card is not inserted, and should be closed when card is inserted Note 1: These two contacts are only for the 3.3V/5V type (CN015P) and are removed for the 3.3V model (CN015R) Function Table Part Number CN015RZ-3013-0 CN015RZ-3013-2 CN015PZ-3013-0 CN015PZ-3013-2 Voltage of SmartMedia Ejector Mis-insertion Protection Sequential Contact Write Protection Switch 3.3V No Yes Yes Yes 10 pcs. 3.3V / 5V No No Yes Yes 10 pcs. SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Pieces per Tray Connectors SmartMedia - SSFDC Insulation Resistance: Withstanding Voltage: Contact Resistance: Voltage Rating: Current Rating: Operating Temp. Range: