MOEH & MOEZ Series – Euro Package 5 Pin OCXO Oven Controlled Oscillator 1.0 MHz to 150.0 MHz Available SC Crystal Option RoHS Option Available ±2ppb to ±500ppb Frequency Range 1.000MHZ to 150.000MHZ Stability Frequency at +25ºC at time of shipment ±10 ppb at +25ºC with Vnom on Pin 1 Frequency vs. Ambient See Part Number Guide for Options Frequency vs. Voltage Less than ±5 ppb for 5% change in Supply Voltage Frequency vs. Load Less than ±5 ppb for 5% change in Load Frequency vs. Time AT Cut ±1.0 ppm per year after 30 days SC Cut ±0.1 ppm per year after 30 days Warm Up 3 min at +25ºC to ±1.0 ppm of final frequency (1 hr reading) Supply and Reference Voltages Supply Voltage (Vdd) Steady State Supply Current Warm Up +3.30 VDC ±5% +5.00 VDC ±5% +12.00 VDC ±5% 540 mA 360 mA 150 mA 1000 mA 720 mA 650 mA +3.00 VDC ±5% +4.00 VDC ±5% 4.00 VDC ±5% Logic “0” (max) +0.33 VDC +0.50 VDC +0.50 VDC Logic “1” (min) +2.97 VDC +4.50 VDC +4.50 VDC Reference Voltage (Output) Output HCMOS Symmetry (50% of Waveform) See Part Number Guide for Options Load 15pF SINEWAVE Amplitude See Part Number Guide for Options Spurious (Harmonics) -20 dBc Spurious (Non Harmonics) -80 dBc Load 50Ω Electronic Frequency Control Control Voltage Range Vnom (Pin 1) Total Frequency Change 0.00 to +3.30 VDC 0.00 to + 5.00 VDC 0.00 to + 5.00 VDC +1.65 VDC +2.50 VDC +2.50 VDC AT Cut ±1.0 ppm typ SC Cut ±0.6 ppm min Slope Positive Input Impedance 100kΩ typ Phase Noise at 10.000MHZ SC Cut Crystal AT Cut Crystal 10 Hz 110 dBC -100 dBc 100 Hz -130 dBc -110 dBc 1 kHz -140 dBc -135 dBc 10 kHz -155 dBc -140 dBc MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Revisions only with customer approval MOEH060611F Pg 1 of 2 Part Number Guide Frequ ency MOE O utput Su pply Voltage H eigh t A = 18.64 [.734] B = 13.46 [.530] H = HCM O S Z3 = Sinew ave + 3dBm Z7 = Sinew ave + 7dBm R oH S C om pliant Blank = N ot Com pliant F = is Com pliant 3 = + 3.30 VDC 5 = + 5.00 VDC 12 = + 12.00 VD C C rystal Cut Blank = AT Cut* S = SC Cut Frequen cy Stability 002 = ±2 ppb 005 = ±5 ppb 010 = ± 10 ppb 050 = ± 50 ppb XXX = 3 digits in ppb O perating T em peratu re A = 0°C to + 50°C C = -20°C to + 70°C D = -30°C to + 70°C E = -30°C to + 80°C F = -40°C to + 85°C G = 0°C to + 70°C Sym m etry Blank = 40% /60% A = 45% /55% Value Added O ption s Blank = N o Added O ptions S3 = Stratum 3 Please Consult with M M D Sales D epartm ent for any other Param eters or O ptions *AT Cut Crystal cannot be used in all Tem perature/Stability options Mechanical Details 35.33 [1.391] H DIM 25.40 [1.000] 6.35 [.250] MIN 12.70 [.500] MMD PART NUMBER FREQUENCY SYYWWL 3 26.97 [1.062] 2 17.60 [.693] PIN PIN PIN PIN PIN 4 15.24 [.600] 0.80 [.031] 1 8.80 [.346] 5 A B HEIGHT DIMENSION 18.64 [.734] 13.46 [.530] 17.78 [.700] Ø2.00 [Ø.079] 0.51 [.020] PIN CONNECTIONS 1 FREQUENCY CONTROL 2 REFERENCE VOLTAGE 3 SUPPLY VOLTAGE 4 OUTPUT 5 GROUND DIMENSION IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR IS RECOMMENDED PIN NUMBERS ARE FOR REFERENCE ONLY Marking Detail Environmental/Mechanical Specification Shock MIL-STD-883, Meth 2002, Cond B Solderability MIL-STD-883, Meth 2003 Line 1 = MMD Line 2 = MMD Part Number (per sales order) Line 3 = Frequency Output (per sales order) Line 4 = SYYWWL Vibration MIL-STD-883, Meth 2007, Cond A Gross Leak Test MIL-STD-883, Meth 1014, Cond C Fine Leak Test MIL-STD-883, Meth 1014, Cond A MSL Level 1 per IPC/JEDEC’S J-STD-20 S YY WW L = Internal Code YY = Year, 2 numerical digits that rep= resents the last 2 digits of the year of manufacture. WW = Week, 2 numerical digits that = represents the week of the year that the OCXO was manufactured. = Denotes RoHS Compliant Pin 1 Designator MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Revisions only with customer approval MOEH060611F Pg 2 of 2