OPA739 Series 3 Watt Light Bar on Anotherm Heat Spreader OPA739 Series • • • • • OPA739_ (120° Beam Angle) 3-1 watt LED on square substrate Mono-color per strip (Blue, Green, Red, Yellow, White) Two component beam angle options (120° or 40°) Universal connector (Tyco 2-292173-2 mates with 173977-2) RoHS Compliant Product Photo Here OPA739_D (40° Beam Angle) The OPA739 Series are designed for areas where lighting intensity and reliability are essential. The light beam angles of 40° and 120° are ideal for illuminating small and medium size areas while requiring minimal space. A patented substrate is used to ensure the best heat dissipation of any light assembly in the industry. For custom colors and design contact your OPTEK representative. Electrical / Optical Characteristics: TA=25°C, IF=350mA Part Number Typical Forward Voltage (V) Luminous Flux (lm) OPA739Y 7.5 OPA739B Beam Angle Color Dominant Wavelength 105 Yellow 587 nm 10.8 27 Blue 470 nm OPA739G 10.8 144 Green 530 nm OPA739R 7.5 78 Red 625 nm OPA739W 10.8 144 White 6,500°K OPA739YD 7.5 105 Yellow 587 nm OPA739BD 10.8 27 Blue 470 nm OPA739GD 10.8 144 Green 530 nm OPA739RD 7.5 78 Red 625 nm OPA739WD 10.8 144 White 6,500°K 120° 40° + Voltage Ground OPA739_ OPA739_D See OVSP_BCR4 for component specifications See OVSP_4CR44 for component specifications DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. RoHS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A 02/07 Page 1 of 1