AAC CJP20-1003FV Thick film chip resistor Datasheet

THICK FILM CHIP RESISTORS
The content of this specification may change without notification 10/04/07
Tin / Tin Lead / Silver Palladium Non-Magnetic / Gold Terminations Available
Custom solutions are available.
HOW TO ORDER
CR
G
10- 1003 F
M
Packaging
M = 7” Reel
V = 13” Reel
B = Bulk
Tolerance (%)
J = +5 G = +2 F = +1
FEATURES
EIA Resistance Value
Standard Decade Values
Size
00 = 01005
20 = 0201
05 = 0402
16 = 0603
10 = 0805
18 = 1206
14 = 1210
12 = 2010
„ Excellent stability over a wide range of
environmental conditions
01 = 2512
01P = 2512-P
„ CR and CJ types in compliance with RoHs
„ CRP and CJP non-magnetic types
constructed with AgPd
Terminals, Epoxy Bondable
Termination Material
Sn = Leave Blank
Au = G
SnPb = T
AgPd = P
Series
CJ = Jumper
„ CRG and CJG types constructed top side
terminations, wire bond pads, with Au
termination material.
CR = Resistor
„ Operating temperature -55°C ~ +125°C
„ Appl. Specifications: EIA 575, IEC 60115-1,
JIS 5201-1, and MIL-R-55342G
SCHEMATIC
Wrap Around Terminal
CR, CJ, CRP, CJP type
SO/ S
Top Side Termination, Bottom Isolated
CRG, CJG type
C
Overcoat
f
Conductor
Wrap Around
Termination Material:
Sn
or SnPb
or AgPd
Wire Bond Pads
Terminal
Material: Au
Ceramic Substrate
Resistive Element
DIMENSIONS (mm)
Size
Size Code
L
W
c
d
t
01005
00
0.40 + 0.02
0.20 + 0.02
0.08 + 0.03
0.10 + 0.03
0.12 + 0.02
0201
20
0.60 + 0.03
0.30 + 0.03
0.10 + 0.05
0.15 + 0.05
0.25 + 0.05
0402
05
1.00 + 0.05
0.5+0.1-0.05
0.20 + 0.10
0.25+0.05-0.10
0.35 + 0.05
0603
16
1.60 + 0.10
0.80 + 0.10
0.20 + 0.10
0.30+0.20-0.10
0.50 + 0.10
0805
10
2.00 + 0.15
1.25 + 0.15
0.40 + 0.25
0.30+0.20-0.10
0.50 + 0.15
1206
18
3.20 + 0.15
1.60 + 0.15
0.45 + 0.25
0.40+0.20-0.10
0.60 + 0.15
1210
14
3.20 + 0.20
2.60 + 0.20
0.50 + 0.30
0.40+0.20-0.10
0.60 + 0.10
2010
12
5.00 + 0.20
2.50 + 0.20
0.50 + 0.30
0.50+0.20-0.10
0.60 + 0.10
2512
01
6.30 + 0.20
3.10 + 0.20
0.50 + 0.30
0.50+0.20-0.10
0.60 + 0.15
2512-P
01P
6.50 + 0.30
3.20 + 0.20
0.60 + 0.30
1.50 + 0.30
0.60 + 0.10
ELECTRICAL SPECIFICATIONS for CHIP RESISTORS
Size
01005
0201
0402
0.031 (1/32) W
0.05 (1/20) W
0.063(1/16) W
Working Voltage*
15V
25V
50V
Overload Voltage
30V
50V
100V
Tolerance (%)
EIA Values
±5
E-24
±1
E-96
Resistance
10 ~ 1.0M
10 ~ 1M
± 250
± 200
Power Rating (EIA 575)
TCR (ppm/°C)
Operating Temp.
American Accurate Components, Inc.
-55°C ~ +125°C
±2
E-24
±5
±1
E-96
1.0~9.1, 10~10M
1.0~9.1, 10~10M
+600
-200
, ± 200
+500
-200
-55°C ~ +125°C
188 Technology Drive Unit H, Irvine, CA 92618
TEL: 949-453-9888 Š FAX: 949-453-8889 Š Email: [email protected]
±2
±5
E-24
, ± 200
1.0~9.1, 10~10M
+500
-200
, ± 200
-55°C ~ +125°C
1
THICK FILM CHIP RESISTORS
The content of this specification may change without notification 10/04/07
Size
0603
0805
1206
1210
0.100 (1/10) W
0.125 (1/8) W
0.250 (1/4) W
0.33 (1/3) W
Working Voltage*
50V
100V
200V
200V
Overload Voltage
100V
200V
400V
Power Rating (EIA 575)
EIA Values
±1
E-96
Resistance
10 ~ 1 M
Tolerance (%)
±2
±1
E-96
E-24
1.0~9.1,
10~10M
±400, ±200
±100
TCR (ppm/°C)
Operating Temp.
±5
10 ~ 1 M
±100
-55°C ~ +125°C
Size
Power Rating (EIA 575)
±2
±5
E-24
1.0~9.1,
10~10M
±400, ±200
10 ~ 1 M
±100
-55°C ~ +125°C
400V
±2
±5
±1
E-96
E-24
1.0~9.1,
10~10M
±400, ±200
±2
±5
E-24
1.0~9.1,
10~10M
±400, ±200
10 ~ 1 M
±100
-55°C ~ +125°C
-55°C ~ +125°C
2010
2512
2512-P
0.500 (1/2) W
1.0 W
2.0 W
200V
200V
200V
Working Voltage*
Overload Voltage
400V
±1
Tolerance (%)
±1
E-96
400V
±2
±5
±1
400V
±2
±5
±1
±2
±5
EIA Values
E-96
E-24
E-96
E-24
E-96
E-24
Resistance
10 ~ 1 M
1.0~9.1, 10~10M
10 ~ 1 M
1.0~9.1, 10~10M
1.0 ~ 1.0M
1.0 ~ 1.0M
±100
±400, ±200
±100
±400, ±200
±100
±100
TCR (ppm/°C)
Operating Temp.
-55°C ~ +125°C
-55°C ~ +125°C
-55°C ~ +155°C
* Rated Voltage: √PxR
ELECTRICAL SPECIFICATIONS for ZERO OHM JUMPERS
Series
CJ20 (0201)
CJ05 (0402)
CJ06 (0603)
CJ10 (0805)
CJ18 (1206)
CJ14 (1210)
CJ12 (2010)
CJ01 (2512)
Rated Current
0.5A (70°C)
1A (70°C)
1A (70°C)
2A (70°C)
2A (70°C)
2A (70°C)
2A (70°C)
2A (70°C)
50 m Ω
50 m Ω
50 m Ω
50 m Ω
50 m Ω
50 m Ω
50 m Ω
50 m Ω
2.5A
2.5A
5A
5A
5A
5A
5A
-55°C ~ +125°C
-55°C ~ +125°C
-55°C ~ +125°C
-55°C ~ +125°C
-55°C ~ +125°C
-55°C ~ +125°C
-55°C ~ +125°C
Resistance (Max)
Max. Overload Current
Working Temp.
1A
-55°C ~ +125°C
* Rated Voltage: √PxR
DERATING CURVE
For resistors operated at ambient temperature over 70°, power rating shall be derated in accordance with figure 1.
Figure 1
The rated voltage is calculated by the following formula:
E= √P * R
E=Rated Voltage(V)
P=Rated Power(W)
R=Resistance Value(Ω)
American Accurate Components, Inc.
188 Technology Drive Unit H, Irvine, CA 92618
TEL: 949-453-9888 Š FAX: 949-453-8889 Š Email: [email protected]
2
THICK FILM CHIP RESISTORS
The content of this specification may change without notification 10/04/07
CHARACTERISTICS
Maximum ∆ Ω +0.05Ω
± 2% & ± 5% Tolerance ± 1% & ± 0.5% Tolerance
Test Item
Short Time Overload
± 0.75%
± 0.50%
Load Life
± 1.50%
± 1.00%
Thermal Shock
± 0.25%
± 0.50%
High Temperature Exposure
± 0.50%
± 1.25%
Terminal Strength
± 0.50%
± 0.50%
Moisture Resistance
± 1.00%
± 0.50%
95% minimum coverage
95% minimum coverage
Solderability
Test Conditions
EIA Standard 575, π 3.6
2.5 x rated voltage for 5 seconds
EIA Standard 575, π 3.14
90 minutes on; 30 minutes off for 1000 hours
EIA Standard 575, π 3.5
-55°C ~ +150°C for 5 cycles
EIA Standard 575, π 3.7
125°C ± 5°C continuous for 100 hours
EIA Standard 575, π 3.9
20gms @ 90° angle for 30 seconds
EIA Standard 575, π 3.10
EIA Standard 575, π 3.12
3 seconds of immersion @ +215°C
EIA Standard Values
1.00
1.15
1.33
1.54
1.78
2.05
2.37
2.74
3.16
3.65
4.22
4.87
5.62
6.49
7.50
8.66
Decade Values in the EIA Standard E-96 Series:
1.02
1.05
1.07
1.10
1.13
1.18
1.21
1.24
1.27
1.30
1.37
1.40
1.43
1.47
1.50
1.58
1.62
1.65
1.69
1.74
1.82
1.87
1.91
1.96
2.00
2.10
2.15
2.21
2.26
2.32
2.43
2.49
2.55
2.61
2.67
2.80
2.87
2.94
3.01
3.09
3.24
3.32
3.40
3.48
3.57
3.74
3.83
3.92
4.02
4.12
4.32
4.42
4.53
4.64
4.75
4.99
5.11
5.23
5.36
5.49
5.76
5.90
6.04
6.19
6.34
6.65
6.81
6.98
7.15
7.32
7.68
7.87
8.06
8.25
8.45
8.87
9.09
9.31
9.53
9.76
Those items in a shaded box are also E-24 values and will be
marked with the EIA 3 Digit Code.
VALUE MARKING
For those parts ordered with an E-24 value, the product will be
marked with a 3 digit code. For those products ordered with an
E-96 value, the product will be marked with a 4 digit code. For
those parts which fall under E-96 and E-24 values (e.g. 1K ohm
is both an E-96 and E-24 value), the part will be marked with a 3
digit code; 4 digit markings for this type is available upon special
request.
01005, 0201, and 0402 Size
No marking
E-24 & E-96 Values
51B
0603 Size
EIA 96 Digit Code of 3.32K ohm
E-96 Values
American Accurate Components, Inc.
0603, 0805, 1206, 1210, 2010, 2512 Sizes
EIA 3 Digit Code of 10K ohm resistor
E-24 Values, E-96 Values
103
Decade Values in the EIA Standard E-24 Series:
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
1213
0805, 1206, 1210, 2010, 2512 Sizes
EIA 4 Digit Code of 121K ohm resistor
E-96 Values
0603 MARKING CODE for E96 VALUES
By combining a specific two digit number and a letter code, you
have a series of numeric/alpha digits that give you the complete
(E96) resistance value codes for 0603 size part marking.
Value
Code
Value
Code
Value
Code
Value
Code
10.0
10.2
10.5
10.7
11.0
11.3
11.5
11.8
12.1
12.4
12.7
13.0
13.3
13.7
14.0
14.3
14.7
15.0
15.4
15.8
16.2
16.5
16.9
17.4
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
17.8
18.2
18.7
19.1
19.6
20.0
20.5
21.0
21.5
22.1
22.6
23.3
23.7
24.3
24.9
25.5
26.1
26.7
27.4
28.0
28.7
29.4
30.1
30.9
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
31.6
32.4
33.2
34.0
34.8
35.7
36.5
37.4
38.3
39.2
40.2
41.2
42.2
43.2
44.2
45.3
46.4
47.5
48.7
49.9
51.1
52.3
53.6
54.9
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
56.2
57.6
59.0
60.4
61.9
63.4
64.9
66.5
68.1
69.8
71.5
73.2
75.0
76.8
78.7
80.6
82.5
84.5
86.6
88.7
90.9
93.1
95.3
97.6
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
Letter Multiplier Cross Reference
A =10
C = 1,000
E = 100,000
B = 100
D = 10,000
F = 1,000,000
0603 Code
01B
25C
93D
Explanation
01 = 10.0 & B = 100
25 = 17.8 & C = 1,000
93 = 90.9 & D = 10,000
188 Technology Drive Unit H, Irvine, CA 92618
TEL: 949-453-9888 Š FAX: 949-453-8889 Š Email: [email protected]
X=1
Y = 0.1
Value
10.0x100 = 1K Ω
17.8x1,000 = 17.8K Ω
90.9 x 10,000 = 909K Ω
3
THICK FILM CHIP RESISTORS
The content of this specification may change without notification 10/04/07
PACKAGE QUANTITY
Type
B
M
V
TAPE
01005
0201
0402
15,000
10,000
40,000
10,000
40,000
Type
B
M
V
1206
5,000
5,000
20,000
0603
25,000
5,000
20,000
0805
10,000
5,000
20,000
1210
2010
2512
5,000
20,000
4,000
20,000
4,000
20,000
Type
Press Pocket Carrier Tape
Rect. Punching Carrier Paper Tape
Plastic (Embossed Tape)
Resistor Size
01005
0201, 0402, 0603, 0805, 1206, 1210
2010 & 2512
REEL DRAWINGS
TAPE SCHEMATIC
7” Reel (M)
13” Reel (V)
PACKAGE DIMENSIONS (mm)
01005 Size
A
0.38±0.02
P1
2.0±0.05
B
0.68±0.02
P0
4.0±0.10
W
8.0±0.10
D0
1.55±0.03
F
3.5±0.05
t1
0.42±0.05
E
1.75±0.05
t2
0.5
K
0.27±0.02
0201 ~ 2512 Size
TAPE DIMENSIONS (mm)
13” Reel (V)
330±2.5
2.3± 0.5
13.0 ± 0.2
9.5 ± 0.5
80.0 ± 1.0
14.4
BULK CASE SCHEMATIC
BULK CASE DIMENSIONS (mm)
A
B
W
E
F
P1
T
Tp
0201
0.41±0.1
0.71±0.1
8.0±0.2
1.75±0.10
3.5±0.05
2.0±0.05
0.5max
0.4+0.05
0402
0.65±0.1
1.15±0.1
8.0±0.2
1.75±0.10
3.5±0.05
2.0±0.05
0.55±0.1
0.40±0.05
0603
1.1±0.2
1.9±0.2
8.0±0.2
1.75±0.1
3.5±0.05
4.0±0.1
0.70±0.1
0.60±0.1
0805
1.65±0.2
2.4±0.2
8.0±0.2
1.75±0.1
3.5±0.05
4.0±0.1
0.90±0.1
0.75±0.1
A
B
W
E
F
P1
T
Tp
1206
2.0±0.15
3.6±0.15
8.0±0.2
1.75±0.1
3.5±0.05
4.0±0.1
0.90±0.1
0.75±0.1
1210
2.9±0.1
3.5±0.1
8.0±0.2
1.75±0.1
3.5±0.05
4.0±0.1
0.90±0.1
0.75±0.1
2010
2.9±0.1
5.3±0.1
12.0±0.2
1.75±0.1
5.5±0.05
4.0±0.1
1.0±0.1
0.25±0.1
2512
3.4±0.1
6.6±0.1
12.0±0.2
1.75±0.1
5.5±0.05
4.0±0.1
1.0±0.1
0.25±0.1
American Accurate Components, Inc.
7” Reel (M)
180 ± 3.0
1.20
13.0 ± 0.2
9.0 ± 0.3
60 ± 1.0
11.4 ± 1.0
M
H
C
G
E
F
A
B
C
D
E
110. 0± 0.7
36.0 ± 0.2
12.0 ± 0.1
31.5 ±0.2
36.0 ±0.2
F
6.8 ±0.1
G
H
I
8.8 ±0.1 12.0 ± 0.1 1.5 ± 0.1
J
K
2.0± 0.1
4.7± 0.1
LABEL DESCRIPTION
One side surface of a reel is marked with a label with the
following items of information.
1. Chip Resistor
2. Part Number
3. Tolerance
4. Quantity
5. Lot number for production month/year/suffix L*
6. Manufacturer’s name or symbol
* The suffix “L” indicates that this item is lead free. As of September
2004, all new production items of the series CR and CJ are no
longer containing tin/lead (SnPb) terminals; they are lead free and in
compliance with Lead Free/RoHS.
188 Technology Drive Unit H, Irvine, CA 92618
TEL: 949-453-9888 Š FAX: 949-453-8889 Š Email: [email protected]
4
THICK FILM CHIP RESISTORS
The content of this specification may change without notification 10/04/07
CR-KITS Series, Thick Film Chip Resistor Engineering Kits
This engineering and design kit is a great sales tool, allowing for application testing before ordering minimum
quantities. AAC offers a wide assortment of popular chip resistors sizes and tolerances, in addition to a large quantity
of each value. The kits are convenient with easy-to-use packaging.
PACKAGE CONSTRUCTION
E-24 KIT VALUES
„ 3 Ring Binder Case Holder
„ Plastic pages with slip holders for each value
„ Each value is individually identified in a slip holder
„ Resistors are packaged on paper tape strips
56K
270K
22K
82K
390K
27K
100K
470K
10K
33K
120K
560K
3.9K
12K
39K
150K
1.0M
4.7K
15K
47K
220K
2.2M
2.2
10
47
180
560
1.8K
5.6K
18K
2.7
18
68
220
680
2.2K
6.8K
3.9
22
75
270
850
2.7K
8.2K
4.7
27
100
330
1.0K
3.3K
6.8
33
120
390
1.2K
8.2
39
150
470
1.5K
E-96 KIT VALUES
10.0
24.3
56.2
133
301
681
1.62K
4.22K
10.0K
23.7K
60.4K
150K
332K
649K
11.3
26.1
61.9
150
332
750
1.82K
4.75K
11.0K
27.4K
68.1K
162K
365K
681K
12.1
28.7
68.1
162
348
825
2.00K
5.11K
12.1K
30.1K
75.0K
178K
392K
732K
13.3
33.2
75.0
174
383
909
2.21K
5.62K
13.0K
33.2K
82.5K
200K
422K
750K
15.0
35.7
82.5
200
422
1.00K
2.37K
6.19K
15.0K
39.2K
90.9K
221K
464K
825K
16.5
39.2
90.9
215
475
1.10K
2.67K
6.81K
16.2K
41.2K
100K
237K
511K
866K
18.2
42.2
100
237
511
1.21K
3.01K
7.50K
18.2K
47.5K
110K
255K
536K
909K
20.0
46.4
107
261
549
1.33K
3.32K
8.25K
20.0K
49.9K
121K
274K
562K
953K
22.1
51.1
118
287
604
1.50K
3.92K
9.09K
22.1K
56.2K
130K
301K
619K
1.0M
Engineering Kits F Type
Engineering Kits J Type
FEATURES
FEATURES
„ EIA Standard E-24 Values
„ EIA Standard E-24 Values
„ Full range from 1 Ω ~ 1M Ω
„ Full range from 10 Ω ~ 1M Ω
„ Resistance Tolerance of +5%
„ Resistance Tolerance of +1%
„ 3,000 Pieces: 50 pieces of 60 different values
„ 3,150 Pieces: 25 pieces of 126 different values
„ ISO 9002 Quality Certified products
„ ISO 9002 Quality Certified products
Part Number for +5% Sample Kit
Part Number for +1% Sample Kit
Part Number
Description
Part Number
Description
CR05-J-KITS
0402, 1/16w, 5%, E-24 values
(1Ω through 2.2M Ω)
CR05-F-KITS
0402, 1/16w, 1%, E-96 values
(10 Ω through 1M Ω)
CR16-J-KITS
0603, 1/16w, 5%, E-24 values
(1Ω through 2.2M Ω)
CR16-F-KITS
0603, 1/16w, 1%, E-96 values
(10 Ω through 1M Ω)
CR10-J-KITS
0805, 1/10w, 5%, E-24 values
(1Ω through 2.2M Ω)
CR10-F-KITS
0805, 1/10w, 1%, E-96 values
(10 Ω through 1M Ω)
CR18-J-KITS
1206, 1/8w, 5%, E-24 values
(1Ω through 2.2M Ω)
CR18-F-KITS
1206, 1/8w, 1%, E-96 values
(10 Ω through 1M Ω)
American Accurate Components, Inc.
188 Technology Drive, Unit H, Irvine, CA 92618
TEL: 949-453-9888 Š FAX: 949-453-8889