DCMSPU01H SERIES 1 Watt DC/DC Converter Single and Output Models Rev C FEATURES • Industrial SMD Package • Qualifies for Lead-Free Reflow Solder Process According to IPC/JEDEC J-STD-020D.1 • I/O Isolation 3000VDC • Over Load and Short Circuit Protection • Water-Washable Process • UL/cUL 60950-1, IEC/EN 60950-1, UL/cUL Available 62368-1, and IEC/EN 62368-1 Pending Safety • Tape & Reel Package Available Approvals • High Efficiency DESCRIPTION The DCMSPU01H series of DC DC converters offers 1 watt of output power in a compact 0.64” x 0.37” x 0.34” industrial SMD package. This series consists of both single and dual output models and 3.3VDC, 5VDC, or 12VDC input options. Other options are available for this series such as a water-washable process and a tape and reel package. Each model in this series has I/O isolation of 3000VDC, high efficiency, and over load and short circuit protection. This series qualifies for leadfree reflow solder process according to IPC/JEDEC J-STD-020D.1 and has UL/cUL 60950-1, IEC/EN 60950-1, UL/cUL 62368-1, and IEC/EN 62368-1 safety approvals. Please call factory for order details. Size: 0.64in x 0.37in x 0.34in (16.3mm x 9.3mm x 8.6mm) MODEL SELECTION TABLE Single Output Models Model Number(7) DCMSPU01-033S033H DCMSPU01-033S05H DCMSPU01-033S12H DCMSPU01-033S15H DCMSPU01-05S033H DCMSPU01-05S05H DCMSPU01-05S12H DCMSPU01-05S15H DCMSPU01-12S033H DCMSPU01-12S05H DCMSPU01-12S12H DCMSPU01-12S15H Input Voltage Range 3.3VDC (2.97~3.63) 5VDC (4.5~5.5) 12VDC (10.8~13.2) Output Voltage 3.3VDC 5VDC 12VDC 15VDC 3.3VDC 5VDC 12VDC 15VDC 3.3VDC 5VDC 12VDC 15VDC Output Current Min Load Max Load 6mA 300mA 4mA 200mA 1.68mA 84mA 1.34mA 67mA 6mA 300mA 4mA 200mA 1.68mA 84mA 1.34mA 67mA 6mA 300mA 4mA 200mA 1.68mA 84mA 1.34mA 67mA Input Current @No Load @Max. Load 390mA 384mA 45mA 377mA 381mA 251mA 244mA 30mA 240mA 236mA 106mA 103mA 17mA 101mA 101mA Output Power 1W 1W 1W Load Regulation Efficiency (Max.) (@Max Load) 15% 12% 10% 9% 12% 11% 7% 7% 9% 8% 6% 6% 77% 79% 81% 80% 79% 82% 84% 85% 78% 81% 83% 83% MODEL SELECTION TABLE Single Output Models Model Number(7) DCMSPU01-033D05H DCMSPU01-033D12H DCMSPU01-033D15H DCMSPU01-05D05H DCMSPU01-05D12H DCMSPU01-05D15H DCMSPU01-12D05H DCMSPU01-12D12H DCMSPU01-12D15H 11/17/2016 Input Voltage Range 3.3VDC (2.97~3.63) 5VDC (4.5~5.5) 12VDC (10.8~13.2) Output Voltage ±5VDC ±12VDC ±15VDC ±5VDC ±12VDC ±15VDC ±5VDC ±12VDC ±15VDC Output Current Min Load Max Load ±2mA ±100mA ±0.84mA ±42mA ±0.66mA ±33mA ±2mA ±100mA ±0.84mA ±42mA ±0.66mA ±33mA ±2mA ±100mA ±0.84mA ±42mA ±0.66mA ±33mA Input Current @No Load @Max. Load 384mA 45mA 377mA 375mA 244mA 30mA 240mA 236mA 102mA 17mA 101mA 99mA Output Power 1W 1W 1W Load Regulation Efficiency (Max.) (@Max Load) 12% 9% 9% 11% 7% 7% 7% 6% 6% Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] 79% 81% 80% 82% 84% 84% 82% 83% 83% Page 1 of 4 DCMSPU01H SERIES 1 Watt DC/DC Converter Single and Output Models Rev C SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, Resistive Load and Rated Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ 2.97 4.5 10.8 -0.7 -0.7 -0.7 3.3 5 12 Max Unit INPUT SPECIFICATIONS Input Voltage Range Input Surge Voltage (1 sec. max) Input Filter OUTPUT SPECIFICATIONS Output Voltage Voltage Accuracy Line Regulation Load Regulation Voltage Balance Output Power Output Current Maximum Capacitive Load 3.3V Input Models 5V Input Models 12V Input Models 3.3V Input Models 5V Input Models 12V Input Models Single Output Models Dual Output Models Dimensions (L x W x H) Case Material Pin Material SAFETY CHARACTERISTICS Safety Approvals (Pending) EMI(4) ESD 11/17/2016 See Table ±3.0 ±1.2 ±1.5 See Table ±0.1 ±1.0 See Table See Table 220 100 For Vin Change of 1% Io=10% to 100% Dual Output, Balanced Loads Ripple & Noise (20MHz 0-20MHz Bandwidth bandwidth) Temperature Coefficient PROTECTION Short Circuit Protection Over Load Protection Normal Vin at 25ºC ENVIRONMENTAL SPECIFICATIONS Operating Ambient Temperature Natural Convection Case Temperature Storage Temperature Humidity Non-Condensing Cooling Lead-Free Reflow Solder Process MTBF (Calculated) MIL-HDBK-217F@25ºC, Ground Benign Moisture Sensitivity Level (MSL) IPC/JEDEC J-STD-020D.1 GENERAL SPECIFICATIONS Efficiency Switching Frequency Isolation Voltage 60 Seconds Isolation Resistance 500VDC Isolation Capacitance 100KHz, 1V PHYSICAL SPECIFICATIONS Weight UL/cUL 60950-1 recognition (UL certificate), IEC/EN 60950-1 (CB-report) UL/cUL 62368-1 recognition (UL certificate), IEC/EN 62368-1 (CB-report) Conduction EN55022, FCC part 15 EN55024 ESD EN61000-4-2 Air±8kV, Contact±6kV Radiated Immunity EN61000-4-3 10V/m Fast Transient(5) EN61000-4-4 ±2kV Surge(5) EN61000-4-5 ±1kV Conducted Immunity EN61000-4-6 10Vrms PFMF EN61000-4-8 3A/m 3.63 5.5 13.2 6 9 18 Internal Capacitor Type VDC VDC %Vnom. % % µF 65 100 mVp-p ±0.01 ±0.02 %/ºC Continuous, Automatic Recovery 160 % -40 +85 ºC +95 ºC 50 +125 ºC 95 %RH Natural Convection IPC/JEDEC J-STD-020D.1 3,657,000 Hours Level 2 50 3000 10 See Table 80 110 20 KHz VDC GΩ pF 0.067oz (1.9g) 0.67in x 0.37in x 0.34in (16.3mm x 9.3mm x 8.6mm) Non-Conductive Black Plastic (flammability to UL 94V-0 rated) Phosphor Bronze Class A Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] A A A A A A Page 2 of 4 Rev C DCMSPU01H SERIES 1 Watt DC/DC Converter Single and Output Models NOTES 1. These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules; however they may not meet all specifications listed. 2. We recommend protecting the converter by a fast blow fuse in the input supply line. 3. Other inputs and output voltages may be available, please contact factory. 4. To meet EN55022 Class A, an external filter is necessary. Please contact factory. 5. To meet EN61000-4-4 & EN61000-4-5 an external capacitor across the input pins is required. Suggested capacitor: 1800µF/50V KY Al-E Cap. 6. Natural convection is about 20LFM but is not equal to still air (0 LFM).] 7. For Water-Washable process, add “W” to end of model number. *Due to advances in technology, specifications subject to change without notice. DERATING CURVES Power Derating Curve 11/17/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 4 DCMSPU01H SERIES 1 Watt DC/DC Converter Single and Output Models Rev C MECHANICAL DRAWINGS Connecting Pin Patterns All dimensions in mm (inches) Tolerance: x.x±0.5 (x.xx±0.02) x.xx±0.25 (x.xxx±0.01) Pin ±0.05 (±0.002) Pin 1 2 3 4 5 6 7 8 9 10 Pin Connections Single Output Dual Output -Vin -Vin +Vin +Vin No Pin No Pin -Vout Common No Pin -Vout No Pin No Pin +Vout +Vout No Pin No Pin No Pin No Pin NC NC NC: No Connection COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 11/17/2016 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 4