MBR1020 THRU MBR10200 星合电子 SCHOTTKY BARRIER RECTIFIER Reverse Voltage - 20 to 200 Volts Forward Current - 10.0Amperes ＸＩＮＧＨＥ ＥＬＥＣＴＲＯＮＩＣＳ FEATURES TO-220AC Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Metal silicon junction ,majority carrier conduction 0.185(4.70) Guard ring for overvoltage protection Low power loss ,high efficiency 0.410(10.42) 0.161(4.10) 0.388(9.85) 0.147(3.74) DIA 0.175(4.44) 0.055(1.39) 0.045(1.14) High current capability ,Low forward voltage drop 0.113(2.88) 0.102(2.60) For use in low voltage ,high frequency inverters, 0.283(7.20) 0.244(6.20) free wheeling ,and polarity protection applications XH 0.610(15.50) MBR10200 0.571(14.50) Dual rectifier construction PIN High temperature soldering guaranteed:260 °C/10 seconds,, 1 0.25"(6.35mm)from case Component in accordance to RoHS 2002/95/EC and 2 0.159(4.05) 1.161(29.50) 0.140(3.55) 1.106(28.10) 0.114(2.90) 0.098(2.50) 0.560(14.22) WEEE 2002/96/EC 0.053(1.34) 0.512(13.00) 0.047(1.20) 0.037(0.94) 0.027(0.68) MECHANICAL DATA 0.023(0.58) 0.014(0.35) Case: JEDEC TO-220AC molded plastic body 0.208(5.28) 0.192(4.88) Terminals: Lead solderable per MIL-STD-750,method 2026 Polarity: As marked Mounting Position: Any Dimensions in inches and (millimeters) Weight: 0.08ounce, 2.24 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Ratings at 25 C ambient temperature unless otherwise specified ,Single phase ,half wave ,resistive or inductive load. For capacitive load,derate by 20%.) Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Symbols MBR 1020 MBR 1030 MBR 1040 VRRM VRMS VDC 20 30 40 14 21 20 30 MBR 1060 MBR 1080 MBR 10100 MBR 10150 MBR 10200 50 60 80 100 150 200 28 35 42 56 70 105 140 40 50 60 80 100 150 200 MBR 1050 Units Volts Volts Volts Per leg Total device I(AV) 5.0 10.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) IFSM 150.0 Amps Maximum average forward rectified current(see Fig.1) Maximum instantaneous forward voltage at 10.0 A(Note 1 ) Maximum instantaneous reverse current at rated DC blocking voltage(Note 1) T A =25 C T A =125 C VF R Operating junction temperature range TJ TSTG 0.85 0.75 0.2 IR Typical thermal resistance (Note 2) Storage temperature range 0.60 15 50 2.5 JC 0.90 0.95 Volts mA C/W -65 to+150 C -65 to+150 C Notes: 1.Pulse test: 300 s pulse width,1% duty cycle 2.Thermal resistance from junction to case 1 ＧＡＯＭＩ ＸＩＮＧＨＥ ＥＬＥＣＴＲＯＮＩＣＳ ＣＯ．，ＬＴＤ． ＷＷＷ．ＳＤＤＺＧ．ＣＯＭ 星合电子 MBR1020 THRU MBR10200 ＸＩＮＧＨＥ ＥＬＥＣＴＲＯＮＩＣＳ RATINGS AND CHARACTERISTIC CURVES S FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.1-FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT AMPERES 10.0 150 RESISTIVE OR INDUCTIVE LOAD 8.0 4.0 2.0 0 20 40 60 80 100 120 150 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) PEAK FORWARD SURGE CURRENT(AMPERES) 6.0 0 TJ=TJMAX 125 0.375" (9.5MM) LEAD LENGTH 100 75 50 25 0 LEAD TEMPERATURE ( C) 1 FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 FIG.4-TYPICAL REVERSE CHARACTERISTICS 50 20 10 TJ=150 C TJ=125 C TJ=125 C (mA) 10 INSTANTANEOUS REVERSE CURRENT INSTANTANEOUS FORWARD CURRENT( AMPERES) 10 NUMBER OF CYCLES AT 60Hz PULSE WIDTH=300 S 1% DUTY CYCLE 1 TJ=25 C 0.1 SR1020CT-SR1040CT SR1050CT-SR10200CT 1 TJ=75 C 0.1 0.01 TJ=25 C 0.01 0.2 0 0.4 0.6 0.8 1.0 1.2 1.4 1.6 SR1020CT-SR1040CT SR1050CT-SR10200CT 0.001 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE% FIG.5-TYPICAL JUNCTION CAPACITANCE FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE, C/ W JUNCTION CAPACITANCE(pF) 4000 TJ=25 C f=1.0MHZ Vsig=50mVp-p 1000 SR1020CT-SR1040CT SR1050CT-SR10200CT 100 0.1 1 10 100 REVERSE VOLTAGE. VOLTS 100 10 1 0.1 0.01 0.1 1 10 100 T, PULSE DURATION ,sec. 2 ＧＡＯＭＩ ＸＩＮＧＨＥ ＥＬＥＣＴＲＯＮＩＣＳ ＣＯ．，ＬＴＤ． ＷＷＷ．ＳＤＤＺＧ．ＣＯＭ