Ecliptek EB13C8H1H-40000M Oscillator Datasheet

Marketing Bulletin
DATE:
January 1st, 2006
TO:
All Sales Personnel
FROM:
Mark Stoner
RE:
Product Termination
To all concerned parties,
This bulletin is to notify all customers of the discontinuation of the following Ecliptek
series effective January 1st, 2006:
Series
EB13C8
Description
3.3V 5 x 7mm SMD Oscillator
Recommended Replacement
EC26
In compliance with our End of Life (EOL) policy, this will serve as advanced notice of
product termination. New orders will not be accepted after April 1st, 2006, with delivery
to conclude by July 1st 2006.
If there are any questions pertaining to this bulletin, please fell free to contact me.
Thank you again for your cooperation.
Best Regards,
Mark W. Stoner
Director of Marketing
Ecliptek Corporation
3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234
EB13C8 Series
EB13C8
• RoHS Compliant (Pb-Free)
• Low Jitter
• Ceramic SMD package
• 3.3V supply voltage
• LVHCMOS
• Stability to 20ppm
• Standby Function
• Available in tube or tape and reel
H 1.6
L 7.0
W 5.0
OSCILLATOR
OBSOLETE
ELECTRICAL SPECIFICATIONS
Frequency Range
19.440MHz to 125.000MHz and 125.009MHz, 125.009375MHz, 125.010MHz, 127MHz, 128MHz, 130MHz, 132MHz,
133MHz, 133.333MHz, 137.472MHz, 142.850MHz, 150MHz, 155.520MHz and 156.250MHz
Operating Temperature Range
0°C to 70°C
-40°C to 85°C
Not available with ±20ppm option > 106.250MHz
Storage Temperature Range
-55°C to 125°C
Supply Voltage (VDD)
3.3VDC ±10%
Input Current
10mA Maximum
19.440MHz to 35.000MHz
20mA Maximum
35.001MHz to 70.000MHz
40mA Maximum
70.001MHz to 125.000MHz
60mA Maximum
125.001MHz to 156.250MHz
Frequency Tolerance / Stability Inclusive of all conditions: Calibration Tolerance at 25°C,
±100ppm, ±50ppm, ±25ppm or
±20ppm Maximum
Frequency Stability over the Operating Temperature Range,
Supply Voltage Change, Output Load Change, First Year Aging
at 25°C, Shock, and Vibration
Output Voltage Logic High (VOH)
90% of VDD Min. IOH= -8mA
Output Voltage Logic Low (VOL)
10% of VDD Max. IOL= +8mA
Rise / Fall Time
5 nSec Maximum
20% to 80% of Waveform w/15pF HCMOS Load from 19.440MHz to 35.000MHz
7 nSec Maximum
20% to 80% of Waveform w/30pF HCMOS Load from 19.440MHz to 35.000MHz
5 nSec Maximum
20% to 80% of Waveform w/HCMOS Load from 35.001MHz to 50.000MHz
4 nSec Maximum
20% to 80% of Waveform w/HCMOS Load from 50.001MHz to 80.000MHz
2 nSec Maximum
20% to 80% of Waveform w/HCMOS Load from 80.001MHz to 125.000MHz
1 nSec Maximum
20% to 80% of Waveform w/HCMOS Load from 125.009MHz to 156.250MHz
Duty Cycle
50 ±10(%)
at 50% of Waveform
50 ±5(%)
at 50% of Waveform < 125.000MHz
50 ±5(%)
at 50% of waveform, at 25°C, at 3.3Vdc > 125.000MHz
Load Drive Capability
30pF HCMOS Load Maximum
< 35.000MHz
15pF HCMOS Load Maximum
> 35.001MHz
Tri-State Input Voltage
Enables Output
No Connection
Enables Output
VIH :≥70% of VDD
Disables Output: High Impedance
VIL :≤30% of VDD
Standby Current
10µA Maximum
Disabled Output: High Impedance
Start Up Time
10 mSec Maximum
RMS Phase Jitter
5 pSec Maximum
19.440MHz to 40.000MHz, FJ = 12kHz to 20MHz
3 pSec Maximum
40.001MHz to 70.000MHz, FJ = 12kHz to 20MHz
1 pSec Maximum
70.001MHz to 156.250MHz, FJ = 12kHz to 20MHz
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EB13C8
CERAMIC
3.3V
OS2H
04/05
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
PART NUMBERING GUIDE
EB13C8 F 2 H - 40.000M TR
PACKAGING OPTIONS
Blank=Bulk, TR=Tape and Reel (Standard)
FREQUENCY TOLERANCE / STABILITY
C=±100ppm Maximum over 0°C to +70°C
D=±50ppm Maximum over 0°C to +70°C
E=±25ppm Maximum over 0°C to +70°C
F=±20ppm Maximum over 0°C to +70°C
G=±100ppm Maximum over -40°C to +85°C
H=±50ppm Maximum over -40°C to +85°C
J=±25ppm Maximum over -40°C to +85°C
K=±20ppm Maximum over -40°C to +85°C
FREQUENCY
OUTPUT CONTROL FUNCTION
H=Tri-State
DUTY CYCLE
1=50 ±10(%)
2=50 ±5(%)
OBSOLETE
MECHANICAL DIMENSIONS
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
ALL DIMENSIONS IN MILLIMETERS
Pin 1: Tri-State
Pin 2: Case Ground
TAPE AND REEL DIMENSIONS
Pin 3: Output
Pin 4: Supply Voltage
Tolerances = ±0.1
ALL DIMENSIONS IN MILLIMETERS
TAPE
A
B
C
D
E
16+.3-.1
7.5±.1
6.75±.1
4 ±.1
2±.1
F
M
N
O
P
Q
1.5 MIN
50 MIN
20.2 MIN
13±.2
40 MIN
QTY/REEL
1,000
REEL
F
G
H
J
K
L
R
S
T
U
V
8±.1
B0*
1.5 +.1-0
A0*
.3 ±.05
K0*
2.5 MIN
10 MIN
22.4 MAX
360 MAX
16.4+2-0
*Compliant to EIA 481A
MARKING SPECIFICATIONS
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
Line 1: ECLIPTEK
Characteristic
Specification
Fine Leak Test
Gross Leak Test
Mechanical Shock
Vibration
Solderability
Temperature Cycling
Resistance to Soldering Heat
Resistance to Solvents
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
MIL-STD-202, Method 213, Condition C
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 2002
MIL-STD-883, Method 1010
MIL-STD-202, Method 210
MIL-STD-202, Method 215
Line 2: XX.XXX M
Frequency in MHz (5 Digits Maximum + Decimal)
Line 3: XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EB13C8
CERAMIC
3.3V
OS2H
04/05
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
Similar pages