EST1GF SUPERFAST RECOVERY RECTIFIERS VOLTAGE 400 Volts 1 Amperes CURRENT FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O Flame Retardant Epoxy Molding Compound • Exceeds environmental standards of MIL-S-19500/228 • Super fast recovery times, high voltage • Ultra Thin Profile Package for Space Constrained Utilization • Package suitable for Automated Handling • Lead free in comply with EU RoHS 2011/65/EU directives • Green molding compound as per IEC61249 Std. . (Halogen Free) MECHANICAL DATA Case : SMAF Molded Plastic Terminals : Solderable per MIL-STD-750, Method 2026 Polarity : Color band denotes cathode end Standard packaging : 12mm tape (EIA-481) Weight : 0.0011 ounces, 0.0328 grams Marking : EST1GF 1 2 Cathode Anode MAXIMUM RATINGS(TA=25oC unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Maximum recurrent peak reverse voltage VRRM 400 V Maximum rms voltage VRMS 280 V VR 400 V Maximum average forward rectified current I F(AV) 1 A Peak forward surge current 8.3ms single half sine-wave superimposed on rated load I FSM 30 A Maximum forward voltage at 1A VF 1.25 V Maximum dc reverse current IR 1 A Typical junction capacitance Measured at 1MHz and applied VR=4V CJ 16 pF Maximum dc blocking voltage Typical thermal resistance (Note 1) (Note 2) RJL RJA 20 150 Maximum reverse recovery time (Note 3) TRR 25 TJ -55 to + 150 o C TSTG -55 to + 150 o C Operating junction temperature range Storage temperature range o C/W nS Note:1.Mounted on an FR4 PCB, single-sided copper, with 100cm2 copper pad area 2.Mounted on an FR4 PCB, single-sided copper, mini pad. 3.Reverse Recovery Test Conditions : I F=0.5A, I R=1A, Recover to 0.25A. July 16,2013-REV.00 PAGE . 1 1.2 CJ, Junction Capacitance (pF) IF, Forward Current (A) EST1GF 1 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 150 100 10 1 1 TC, Case Temperature (°C) Fig.2 Typical Junction Capacitance 10 TJ = 150°C IF, Forward Current (A) IR, Reverse Current (μA) 100 10 1 TJ = 125°C 0.1 TJ = 75°C 0.01 TJ = 25°C 0.001 20 30 40 50 60 70 80 90 100 TJ = 150°C 1 TJ = 125°C TJ = 75°C 0.1 TJ = 25°C 0.01 0.2 Percent of Rated Peak Reverse Voltage (%) Fig.3 Typical Reverse Characteristics July 16,2013-REV.00 100 VR, Reverse Bias Voltage (V) Fig.1 Forward Current Derating Curve 10 10 0.4 0.6 0.8 1 1.2 1.4 VF, Forward Voltage (V) Fig.4 Typical Forward Characteristics PAGE . 2 EST1GF MOUNTING PAD LAYOUT 0.232 (5.9) 0.063 (1.6) 0.075 (1.9) 0.106 (2.7) ORDER INFORMATION • Packing information T/R - 10K per 13" plastic Reel T/R - 3K per 7" plastic Reel July 16,2013-REV.00 PAGE . 3 EST1GF Part No_packing code_Version EST1GF_R1_00001 EST1GF_R2_00001 For example : RB500V-40_R2_00001 Serial number Version code means HF Packing size code means 13" Part No. Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING July 16,2013-REV.00 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 4 EST1GF Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. July 16,2013-REV.00 PAGE . 5