HMC603MS10 / 603MS10E v00.0905 0.5 dB LSB GaAs MMIC 5-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.7 - 3.8 GHz ATTENUATORS - SMT 6 Typical Applications Features The HMC603MS10 / HMC603MS10E is ideal for: 0.5 dB LSB Steps to 15.5 dB • Cellular/3G Infrastructure Single Positive Control Per Bit • ISM, MMDS ± 0.15 dB Typical Bit Error • WLAN, WiMAX, & WiBro High Input IP3: +50 dBm MSOP10 SMT Package Functional Diagram General Description The HMC603MS10 & HMC603MS10E are general purpose broadband 5-bit positive control GaAs IC digital attenuators in 10 lead MSOP surface mount plastic packages. Covering 0.7 to 3.8 GHz, the insertion loss is less than 2.0 dB typical. The attenuator bit values are 0.5 (LSB), 1, 2, 4 and 8 dB for a total attenuation of 15.5 dB. Attenuation accuracy is excellent at ± 0.15 dB typical with an IIP3 of +50 dBm. Five bit control voltage inputs, toggled between 0 and +3 to +5V, are used to select each attenuation state at less than 1.0 uA each. A single Vdd bias of +3 to +5V applied through an external 5K Ohm resistor is required. Electrical Specifications, TA = +25° C, Vdd= +3V to +5V & Vctl= 0/Vdd (Unless Otherwise Stated) Parameter Frequency (GHz) 0.7 - 1.4 1.4 - 2.3 2.3 - 2.7 2.7 - 3.8 Insertion Loss Attenuation Range Max. Units 1.3 1.7 2.2 2.7 1.6 2.0 2.5 3.1 dB dB dB dB 15.5 dB 25 18 13 12 dB dB dB dB All States 0.7 - 2.2 2.2 - 3.8 ± (0.2 + 2% of Atten. Setting) Max. ± (0.3 + 3% of Atten. Setting) Max. Vdd = 5V Vdd = 3V 0.7 - 3.8 29 28 dBm dBm REF - 2 dB States 2.5 - 15.5 dB States 0.7 - 3.8 53 48 dBm dBm 1.6 1.6 μs μs Attenuation Accuracy: (Referenced to Insertion Loss) Input Third Order Intercept Point (Two-tone Input Power = 0 dBm Each Tone) Typical 0.7 - 1.4 1.4 - 2.3 2.3 - 2.7 2.7 - 3.8 Return Loss (RF1 & RF2, All Atten. States) Input Power for 0.1 dB Compression Min. dB dB Switching Characteristics tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) 6 - 182 0.7 - 3.8 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC603MS10 / 603MS10E v00.0905 0.5 dB LSB GaAs MMIC 5-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.7 - 3.8 GHz Return Loss RF1, RF2 (Only Major States are Shown) -5 -1 RETURN LOSS (dB) INSERTION LOSS (dB) 6 0 0 -0.5 -1.5 -2 -2.5 -3 +25 C +85 C -40 C -3.5 1 dB 8 dB I.L -10 0.5 dB -15 2 dB -20 -25 4 dB 15.5 dB -4 0.5 1 1.5 2 2.5 3 3.5 -30 0.5 4 1 1.5 FREQUENCY (GHz) 2 2.5 3 3.5 4 FREQUENCY (GHz) Normalized Attenuation Bit Error vs. Attenuation State 0 0.5 -2 0.4 3.5 GHz -4 2.4 GHz 0.3 BIT ERROR (dB) NORMALIZED ATTENUATION (dB) (Only Major States are Shown) -6 -8 -10 -12 0.2 0.1 0 -0.1 -14 -16 -0.2 -18 0.5 -0.3 0.5 0.9 GHz 1 1.5 2 2.5 3 3.5 4 2 3.5 FREQUENCY (GHz) 5 1.9 GHz 6.5 8 9.5 11 12.5 14 15.5 ATTENUATION STATE (dB) Bit Error vs. Frequency Relative Phase vs. Frequency (Only Major States are Shown) (Only Major States are Shown) 40 0.6 1 dB RELATIVE PHASE (deg) 0.5 dB 0.3 BIT ERROR (dB) ATTENUATORS - SMT Insertion Loss 0 2 dB -0.3 15.5 dB 20 15.5 dB 8 dB 4 dB 0 -20 0.5, 1, 2 dB 4 dB 8 dB -0.6 0.5 1 1.5 2 2.5 FREQUENCY (GHz) 3 3.5 4 -40 0.5 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 6 - 183 HMC603MS10 / 603MS10E v00.0905 0.5 dB LSB GaAs MMIC 5-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.7 - 3.8 GHz Truth Table Worst Case Step Error 0.6 Control Voltage Input V1 8 dB V2 4 dB V3 2 dB V4 1 dB V5 0.5 dB Attenuation State RF1 - RF2 0.2 High High High High High Reference I.L. 0.1 High High High High Low 0.5 dB 0.5 0.4 STEP ERROR (dB) ATTENUATORS - SMT 6 0.3 0 High High High Low High 1 dB -0.2 High High Low High High 2 dB -0.3 High Low High High High 4 dB Low High High High High 8 dB Low Low Low Low Low 15.5 dB Max. Atten. -0.1 -0.4 -0.5 -0.6 0.5 1 1.5 2 2.5 3 3.5 4 Any combination of the above states will provide an attenuation approximately equal to the sum of the bits selected. FREQUENCY (GHz) Bias Voltage & Current Control & Bias Voltages Vdd = +5.0 Vdc ± 10% Vdd (VDC) Idd (Typ.) (μA) +3.0 4.0 +5.0 5.0 State Bias Condition Low 0 to +0.2V @ 1.0 μA Max. High Vdd ± 0.2V @ 0.5 μA Max. Note: Vdd = +3V to +5V ± 0.2V 0.00.20.2 Application Circuit Note: DC Blocking Capacitors C1 & C2 are required on RF1 & RF2. Choose C1 = C2 = 100 ~ 300 pF to allow lowest customer specific frequency to pass with minimal loss. R1= 5K Ohm is required to supply voltage to the circuit through either Pin 6 or Pin 10. 6 - 184 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC603MS10 / 603MS10E v00.0905 0.5 dB LSB GaAs MMIC 5-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.7 - 3.8 GHz Absolute Maximum Ratings +30 dBm Control Voltage (V1 - V5) Vdd + 0.5 Vdc Bias Voltage (Vdd) +8.0 Vdc Channel Temperature 150 °C Thermal Resistance 182 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 6 ATTENUATORS - SMT RF Input Power (0.7 - 3.8 GHz) Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC603MS10 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC603MS10E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [1] H603 XXXX [2] H603 XXXX [3] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 6 - 185 HMC603MS10 / 603MS10E v00.0905 0.5 dB LSB GaAs MMIC 5-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.7 - 3.8 GHz Pin Descriptions ATTENUATORS - SMT 6 6 - 186 Pin Number Function Description 1-5 V1 - V5 See truth table and control voltage table. 6 RF2 This pin is DC coupled and matched to 50 Ohm. A blocking capacitor is required. 7-9 GND These pins must be DC grounded. 10 RF1 This pin is DC coupled and matched to 50 Ohm. A blocking capacitor is required. Interface Schematic For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC603MS10 / 603MS10E v00.0905 0.5 dB LSB GaAs MMIC 5-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.7 - 3.8 GHz Evaluation Circuit Board ATTENUATORS - SMT 6 * R2 - R6= 100 Ohm. These resistors are optional and may be used to enhance decoupling of the RF path from the control inputs. List of Materials for Evaluation PCB 112747 [1] Item Description J1 - J2 PCB Mount SMA Connector J3 - J8 DC Pin R1 5k Ohm Resistor, 0402 Pkg. R2 - R6 100 Ohm Resistor, 0402 Pkg. C1 - C2 0402 Chip Capacitor, Select Value for Lowest Frequency U1 HMC603MS10 / HMC603MS10E Digital Attenuators PCB [2] 112746 Evaluation PCB The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 6 - 187