MPS EV3388DR-00A 8 strings white led driver evaluation board Datasheet

EV3388DR-00A
8 strings White LED Driver
Evaluation Board
The Future of Analog IC Technology
DESCRIPTION
FEATURES
The EV3388DR-00A is an evaluation board for the
MP3388DR, a step-up converter designed for large
liquid-crystal displays that employ an array of LEDs
as the light source. It can drive up to 8 strings in
parallel and 10 LEDs per string.




The MP3388 uses internal switch current mode,
fixed frequency architecture and includes current
ballast in each string terminal, which achieves
±3% current regulation accuracy between strings.
Low feedback voltage at each LED string help
reduce power loss and improve efficiency.

The MP3388 has multiple features to protect the
converter from fault conditions, including undervoltage lockout, current limiting, over voltage,
short LED, open LED and thermal shut-down
protection.
APPLICATIONS
The MP3388 is available in small QFN24 (4mmx
4mm) package.







4.5V to 25V Input Voltage Range
Up to 89% Efficiency
Programmable Over Voltage Protection
Drives up to 8 Strings Parallel and 10 LEDs
in Series.
±3% Current Regulation Accuracy Between
Strings
Selectable Switching Frequency: 1.25MHz
and 625kHz
Open and Short LED Load Protection
Thermal Shutdown
Notebook PC
Small LCD TV
Handy Terminals Display
Automotive Systems and Tablet Computer
“MPS” and “The Future of Analog IC Technology” are Registered Trademarks of
Monolithic Power Systems, Inc.
ELECTRICAL SPECIFICATIONS
Parameter
Input
Voltage
Symbol
Value
Units
VIN
4.5 – 25
V
8 strings parallel and
10 LEDs each string
LEDs #
LED Current
ILED
20/string
mA
EV3388DR-00A EVALUATION BOARD
(L x W x H) 10.0cm x 1.0cm x 1.0cm
EV3388DR-00A Rev.1.0
12/27/2013
Board Number
MPS IC Number
EV3388DR-00A
MP3388DR
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2013 MPS. All Rights Reserved.
1
EV3388DR-00A 8 STRINGS WHITE LED DRIVER
EVALUATION BOARD SCHEMATIC
EV3388DR-00A Rev.1.0
12/27/2013
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2013 MPS. All Rights Reserved.
2
EV3388DR-00A 8 STRINGS WHITE LED DRIVER
EV3388DR-00A BILL OF MATERIALS
Qty
Ref
Value
1
C1
4.7µF
2
C2, C4
NC
1
C3
2.2uF
1
C5
NC
1
C6
22nF
1
C7
4.7uF
1
C8
1.8nF
1
C9
68nF
1
C10
100pF
1
D1
1
F1
1
L1
Description
Ceramic Capacitor,
50V, X7R
Package
Manufacturer
1210
Murata
Part Number
GRM32ER71H475KA88L
1210
Ceramic Capacitor,
50V, X7R
1210
TDK
C3225X7R1H225
0603
Ceramic Capacitor,
50V, X7R
Ceramic Capacitor,
16V, X5R
Ceramic Capacitor,
50V, X7R
Ceramic Capacitor,
50V, X7R
Ceramic Capacitor,
50V, COG
Diode Schottky, 60V,
1A
Fuse, 2.5A
0603
Murata
GRM188R71H223KA01D
0805
Murata
GRM21BR61C475KA88
0603
Murata
GRM188R71H182KA01D
0603
Murata
GRM188R71H683KA93D
0603
Murata
GRM1885C1H101JA01D
SMA
Diodes Inc
DFLS160-F
1206
10µH
Inductor,2.47A
SMD
Cooper
10uH
Inductor,2.5A
SMD
TDK
P- channel MOSFET
SO8
DR73-100
SLF10145T-100M2R5-H
1
M1
1
R1
324kΩ
Resistor, 1%
0603
Yageo
RC0603FR-07324KL
1
R2
1kΩ
Resistor, 1%
0603
Yageo
RC0603FR-071KL
1
R3
10kΩ
Resistor, 1%
0603
Yageo
RC0603FR-0710KL
2
20kΩ
Resistor, 5%
0603
Yageo
RC0603JR-0720KL
1
R4,R6
R5, R8,
R9
R7
RC0603FR-0760K4L
1
U1
3
EV3388DR-00A Rev.1.0
12/27/2013
NC
60.4kΩ
AM4499P
0603
Resistor, 1%
0603
Yageo
LED Driver IC
QFN24
MPS
MP3388DR
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2013 MPS. All Rights Reserved.
3
EV3388DR-00A 8 STRINGS WHITE LED DRIVER
PRINTED CIRCUIT BOARD LAYOUT
Figure 1—Top Layer
Figure 2—Bottom Layer
QUICK START GUIDE
1. Connect the positive and negative terminals of the load panel (10 white LEDs in series, 8 stings
paralleled) to the LED+ and LED1~8 pins on the EV board, respectively.
2. Connect the positive and negative terminals of the power supply (4.5V ~ 25V) to the VIN and
GND pins on the EV board, respectively.
3. Drive EN pin high (2.5V < Ven < 5V) to enable the MP3388.
4. For PWM dimming, apply a PWM rectangular waveform with a minimum voltage less than 0.5V
and a maximum greater than 2.5V on PWM DIM pin. The frequency of the PWM signal is
recommended between 200Hz to 2kHz.and Duty of PWM range from 15% to 100%.
NOTICE: The information in this document is subject to change without notice. Users should warrant and guarantee that third
party Intellectual Property rights are not infringed upon when integrating MPS products into any application. MPS will not
assume any legal responsibility for any said applications.
EV3388DR-00A Rev. 1.0
12/27/2013
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2013 MPS. All Rights Reserved.
4
Similar pages