1.6X0.8mm SMD CHIP LED LAMP Part Number: APT1608CGCK Green Features Description z 1.6mmX0.8mm SMT LED, 0.75mm THICKNESS. The Green source color devices are made with InGaAlP on z LOW POWER CONSUMPTION. GaAs substrate Light Emitting Diode. z WIDE VIEWING ANGLE. z IDEAL FOR BACKLIGHT AND INDICATOR. z VARIOUS COLORS AND LENS TYPES AVAILABLE. z PACKAGE: 2000PCS / REEL . z MOISTURE SENSITIVITY LEVEL : LEVEL 3. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAA6059 REV NO: V.10 DATE: JUN/01/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1203005329 Selection Guide Part No. Dice APT1608CGCK Iv (mcd) [2] @ 20mA Lens Type Green (InGaAlP) WATER CLEAR Viewing Angle [1] Min. Typ. 2θ1/2 10 40 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 574 nm IF=20mA Green 570 nm IF=20mA Spectral Line Half-width Green 20 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 2.1 2.5 V IF=20mA IR Reverse Current Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAA6059 REV NO: V.10 DATE: JUN/01/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1203005329 Green APT1608CGCK SPEC NO: DSAA6059 REV NO: V.10 DATE: JUN/01/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1203005329 APT1608CGCK Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAA6059 REV NO: V.10 DATE: JUN/01/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1203005329 PACKING & LABEL SPECIFICATIONS APT1608CGCK SPEC NO: DSAA6059 REV NO: V.10 DATE: JUN/01/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1203005329