Cree® SMD LED Model # LM1-PWN1-11-N1 Data Sheet 120-degree, 3.2 x 2.7 mm, power SMD in white color with water-transparent lens Applications • • • • Indicators Illuminations LCD Back Lights Automobile Applications Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit IF 30 mA IFP 100 mA Reverse Voltage VR 5 V Power Dissipation PD 130 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 °C RTHJA 350 °C/W RTHJS 200 °C/W Forward Current Peak Forward Current Junction/Ambient Note 1 Note 2 Junction/Solder Point Notes: 1. 2. Pulse width ≤0.1 msec, duty ≤1/10. Rth test condition: mounted on PCB FR4 (pad size ≥16 mm2) D-CT151.000 Data Sheet: CL Typical Electrical & Optical Characteristics (TA = 25°C ) Characteristics Symbol Condition Forward Voltage VF IF = 30 mA V Reverse Current IR VR = 5 V μA Luminous Intensity IV IF = 30 mA mcd Chromaticity Coordinates x IF = 30 mA 0.31 y IF = 30 mA 0.32 2θ½ IF = 30 mA 50% Power Angle Unit Minimum deg Subject to change without notice. www.cree.com/ledlamps Typical Maximum 3.6 4.2 10 450 780 120 Standard Bins for LM1-PWN1-11-N1 (IF = 30 mA) Lamps are sorted to luminous intensity (IV) and chromaticity coordiates (x,y) bins shown. Orders for LM1-PWN1-11-N1 may be filled with any or all bins contained as below. All luminous intensity (IV) and chromaticity coordinates (x,y) values shown and specified are at IF = 30 mA. A1 A2 B1 B2 c W1 or above Luminous Intensity (IV) 1120 mcd V2 900 mcd V1 710 mcd U2 560 mcd U1 450 mcd Chromaticity Coordinates (x,y) Rank Chromaticity x Coordinates y A1 A2 0.245 0.264 0.280 0.264 0.264 0.283 0.296 0.280 0.283 0.307 0.313 0.296 0.229 0.267 0.248 0.220 0.267 0.305 0.276 0.248 0.305 0.337 0.297 0.276 Rank Chromaticity x Coordinates y B1 B2 c 0.307 0.330 0.330 0.313 0.330 0.361 0.356 0.330 0.337 0.360 0.318 0.297 0.360 0.385 0.351 0.318 Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is ±10%. 3. Tolerance of measurement of color coordinates is ±0.01. 4. Tolerance of measurement of VF is ±0.05 V. 5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document. 6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT151.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps CIE Chromaticity Diagram CIE CIE Chromaticity Diagram 0.90 520 530 0.80 540 510 550 0.70 560 0.60 570 490 0.50 Y 580 590 0.40 600 c 610 620 630 B2 0.30 B1 480 A2 A1 0.20 470 0.10 460 0.00 0.00 0.10 0.20 0.30 4/5 X 0.40 0.50 0.60 CLD-CT151.000 0.80 Format #: COTCO-D-074 Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 0.70 REV.4 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. SPE/LM1-PWN1-11-N1 Rev. No. 03 Graphs Graphs If (mA) 100.0 -40 -50 -30 -10 -20 0 0.0 Vr(V) 80.0 -10.0 60.0 -20.0 40.0 -30.0 -40.0 20.0 0.0 3.0 Vf(V) 3.4 3.8 4.2 Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. 5.0 4.6 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. -50.0 Half Power WL=150nm 2.5 100% 2.0 75% 1.5 50% 1.0 25% 0.5 0.0 0.0 0% If(mA) 20.0 40.0 60.0 80.0 100.0 FIG.3 RELATIVE LUMINOUS INTENSITY VS. IF(mA) 600 700 800 50% Power Angle : 40 Ie(%) 0 Rth j-s=200 C/W 100% 30 80% 20 60% 10 0 40% Rth j-a=350 C/W 20% T ( C) 0 20 40 60 80 100 -90 FIG.5 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE. DERATING BASED ON Tjmax=110 C Items 500 WAVELENGTH. FORWARD CURRENT 50 400 FIG.4 RELATIVE LUMINOUS INTENSITY VS. -30 -60 0 30 90 0% FIG.6 FAR FIELD PATTERN. Signatures Date Prepared by WangFJ 2007-04-26 Rev.No Checked by XieJH 2007-04-26 02 2005-08-09 Release. Approved by DavidLiu 2007-04-26 03 2007-04-26 Change tolerance of CIE(x,y) from +/-0.015 to +/-0.01 FCN# Revision History Date Change Description FCN20070103 Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks Cree, Inc. Copyright@2002 Cotco of International Ltd. 60 CLD-CT151.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. SPE/LM1-PWN1-11-N1 Rev. No. 03 Mechanical Dimensions Dimension Drawing All dimensions are in mm. cations ngs at Ta = 25°C in Absolute maximum ymbol Rating Unit IF 30 mA IFP 100 mA VR 5 V PD 130 mW Topr -40 ~ + 100 °C Tstg -40 ~ + 100 °C Tj +110 °C Rth JA 350 °C/W Rth JS 200 °C/W 2 uty <=1/10 ** Rth test condition: Mounted on PC Board FR 4(pad size>=16mm ) ical Characteristics ( Ta = 25°C) Symbol Condition Min. Typ. Max. Unit VF IF = 30mA --- 3.6 4.2 V IR VR = 5V --- --- 10 PA 450 780 --- mcd --- 0.31 --- --- IV x Notes I = 30mA F RoHS Compliance IF = 30mA The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the y I = 30mA --0.32 ----thresholdF limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment amended through --- April 21, 2006. 120 --deg 2 T½ (RoHS), Ias F = 30mA Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT151.000 2/5 Format #: COTCO-D-074 REV.4 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color 1: Full-color distribution 2~9, A~Z . . . : special request * aaaaaaaaa-aaa-aa- x x x x x IV 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type 0: Standard = tape pack 1~9, A~Z . . . : special request * Product P/N * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number Description LM1-PWN1-11-N1-00001 SMD 120 White, FULL RANK, Tape & Reel LM1-PWN1-11-N1-00002 SMD 120 White, A1, A2, B1, B2, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT151.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps