Document 170-1 SMT Power Inductors – DO3308P • Handle saturating currents up to 4.2 Amps • Defense Supply Center CID: A-A-59738 Designer’s Kit C309 contains 3 each of all values Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS gold over nickel over phos bronze. Other terminations available at additional cost. Weight 594 – 640 mg Ambient temperature –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/13″ reel Plastic tape: 24 mm wide, 0.4 mm thick, 12 mm pocket spacing, 3.7 mm pocket depth PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf DCR L ±20%2 Percent max Part number1 (µH) tol3 (Ohms) DO3308P-472_L_ DO3308P-682_L_ DO3308P-103_L_ DO3308P-153_L_ DO3308P-223_L_ 4.7 6.8 10 15 22 SRF typ (MHz) Isat4 (A) Irms5 (A) 20,10 20,10 20,10 20,10 20,10 0.036 0.060 0.085 0.12 0.18 50 47 37 35 26 4.2 3.9 2.7 2.3 1.8 3.2 2.6 2.3 1.9 1.5 DO3308P-333_L_ DO3308P-473_L_ DO3308P-683_L_ DO3308P-104_L_ DO3308P-154_L_ 33 47 68 100 150 20,10 20,10 20,10 20,10 20,10 0.25 0.32 0.54 0.69 0.94 19 14 12 11 9.0 1.6 1.3 1.1 0.87 0.74 1.2 1.0 0.9 0.73 0.62 DO3308P-224_L_ DO3308P-334_L_ DO3308P-474_L_ DO3308P-684_L_ DO3308P-105_L_ 220 330 470 680 1000 20,10 20,10 20,10 20,10 20,10 1.60 2.15 3.30 4.40 7.00 6.0 5.5 4.5 3.5 2.5 0.56 0.50 0.40 0.33 0.29 0.51 0.40 0.33 0.28 0.23 1. Please specify tolerance, termination and packaging codes: DO3308P-105MLD Tolerance: M = 20% K = 10% Termination: L = RoHS compliant gold over nickel over phos bronze. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc. 3. Tolerances in bold are stocked for immediate shipment 4. DC current at which inductance drops 10% (typ) from its value without current. 5. Current that causes a 40°C temperature rise from 25°C ambient. 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 170-1 Revised 05/03/13 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 170-2 SMT Power Inductors – DO3308P Series Typical L vs Frequency Typical L vs Current 10000 10000 1000 µH 100 µH 100 10 µH 10 1 0.01 1000 µH 1000 Inductance (µH) Inductance (µH) 1000 100 µH 100 10 µH 10 1 0.1 10 1 0.01 10 Current (A) Irms Derating 0.330 dia 8,38 an additional 0.01/0,254 * Allow in length and 0.005/0,127 in 0.118 max* 3,00 120 110 height for optional tin-lead and tin-silver-copper application. 0.510 max* 12,95 100 90 80 0.370 max 9,40 70 60 50 30 Recommended Land Pattern 0.145 3,69 0.100 2,54 40 25°C Percent of rated Irms 1 0.1 Frequency (MHz) 0.110 2,79 0.115 2,92 20 10 0 -40 -20 0 20 40 60 80 Ambient temperature (°C) 100 120 140 0.100 2,54 0.405 10,29 0.300 7,62 Internal code XXX X Start Dash number Finish Part marking since Feb. 2005. Parts manufactured prior to that date may have color dots. Visit www.coilcraft.com/colrpowr.cfm for color dot marking details. Dimensions are in inches mm US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 170-2 Revised 05/03/13 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.