SAW Components Data Sheet B4166 SAW Components B4166 1842,50 MHz Low-Loss Filter for Mobile Communication Data Sheet Ceramic package DCC6C Features ● Low-loss RF filter for mobile telephone PCN system, receive path ● High selectivity ● Usable passband: 75 MHz ● No matching network required for operation at 50 Ω ● Ceramic Package for Surface Mounted Technology (SMT) Terminals ● Ni, gold-plated Dimensions in mm, approx. weight 0,037 Pin configuration 2 5 1, 3, 4, 6 Input Output To be grounded Type Ordering code B4166 B39182-B4166-U410 Marking and Package according to C61157-A7-A67 Packing according to F61074-V8088-Z000 Electrostatic Sensitive Device (ESD) Maximum ratings Operable temperature range Storage temperature range DC voltage Input power at GSM850, GSM900 GSM1800, GSM1900 Tx bands T Tstg VDC – 40/+ 85 – 40/+ 85 5 PIN PIN 15 12 ˚C ˚C V dBm dBm 2 peak power of GSM signal, duty cycle 4:8 April 16, 2009 SAW Components B4166 1842,50 MHz Low-Loss Filter for Mobile Communication Data Sheet Characteristics T = 25 +- 2˚C ZS = 50 Ω ZL = 50 Ω Operating temperature range: Terminating source impedance: Terminating load impedance: min. typ. max. — 1842,5 — — 2,9 3,3 dB MHz — 0,9 1,3 dB 1805,0 ...1880,0 MHz — 2,0 2,2 1805,0 ...1880,0 MHz — 2,2 2,4 10,0 370,0 1300,0 1705,0 1920,0 1980,0 2530,0 2680,0 3400,0 3975,0 4200,0 4920,0 5200,0 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz 40,0 37,0 30,0 12,0 12,0 23,0 31,0 28,0 24,0 23,0 15,0 10,0 5,0 3 April 16, 2009 fc Center frequency Maximum insertion attenuation 1805,0 ...1880,0 Amplitude ripple (p-p) 1805,0 ...1880,0 MHz αmax MHz ∆α Input VSWR Output VSWR α Attenuation ... 370,0 ...1300,0 ...1705,0 ...1785,0 ...1980,0 ...2530,0 ...2680,0 ...3400,0 ...3975,0 ...4200,0 ...4920,0 ...5200,0 ...6000,0 43,5 38,5 36,0 14,0 25,0 28,0 35,0 34,0 30,0 27,0 19,0 17,0 11,0 — — — — — — — — — — — — — dB dB dB dB dB dB dB dB dB dB dB dB dB SAW Components B4166 1842,50 MHz Low-Loss Filter for Mobile Communication Data Sheet Characteristics T = -40 to +85˚C ZS = 50 Ω ZL = 50 Ω Operating temperature range: Terminating source impedance: Terminating load impedance: min. typ. max. — 1842,5 — — 3,2 4,5 dB MHz — 1,2 2,5 dB 1805,0 ...1880,0 MHz — 2,1 2,5 1805,0 ...1880,0 MHz — 2,3 2,7 10,0 370,0 1300,0 1705,0 1920,0 1980,0 2530,0 2680,0 3400,0 3975,0 4200,0 4920,0 5200,0 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz 40,0 37,0 30,0 9,0 10,0 23,0 31,0 28,0 24,0 23,0 15,0 10,0 5,0 4 April 16, 2009 fc Center frequency Maximum insertion attenuation 1805,0 ...1880,0 Amplitude ripple (p-p) 1805,0 ...1880,0 MHz αmax MHz ∆α Input VSWR Output VSWR α Attenuation ... 370,0 ...1300,0 ...1705,0 ...1785,0 ...1980,0 ...2530,0 ...2680,0 ...3400,0 ...3975,0 ...4200,0 ...4920,0 ...5200,0 ...6000,0 43,5 38,5 36,0 13,0 25,0 28,0 35,0 34,0 30,0 27,0 19,0 17,0 11,0 — — — — — — — — — — — — — dB dB dB dB dB dB dB dB dB dB dB dB dB SAW Components B4166 1842,50 MHz Low-Loss Filter for Mobile Communication Data Sheet Transfer function (spec for 25˚C) Transfer function (wideband) 5 April 16, 2009 SAW Components B4166 1842,50 MHz Low-Loss Filter for Mobile Communication Data Sheet Published by EPCOS AG Surface Acoustic Wave Components Division, OFW E MF P.O. Box 80 17 09, D-81617 München EPCOS AG 2009. All Rights Reserved. As far as patents or other rights of third parties are concerned, liability is only assumed for components per se, not for applications, processes and circuits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. For questions on technology, prices and delivery please contact the sales offices of EPCOS AG or the international representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our sales offices. 6 April 16, 2009