® LY61L10248A 1M X 8 BIT HIGH SPEED CMOS SRAM Rev. 1.3 REVISION HISTORY Revision Description Issue Date Rev. 1.0 Rev. 1.1 Initial Issued 1.“CE# ≧VCC - 0.2V” revised as ”CE# ≦0.2” for TEST CONDITION of Average Operating Power supply Current Icc1 on page3 2.Revised ORDERING INFORMATION Page11 2012/2/21 July.19. 2012 Rev. 1.2 1. Revise “TEST CONDITION” for VOH, VOL on page 4 IOH = -8mA revised as -4mA IOL =4mA revised as 8mA 2. Revise VIH(max) & VIL(min) note on page 4 VIH(max) = VCC + 2.0V for pulse width less than 6ns. VIL(min) = VSS - 2.0V for pulse width less than 6ns. Revised the address pin sequence of TSOP-II pin configuration on page 3 in order to be compatible with industry convention. (No function specifications and applications have been changed and all the characteristics are kept all the same as Rev 1.2 ) June. 04. 2013 Rev. 1.3 Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, lndustry E . Rd. 9, Science-Based Industrial Park, Hsinchu County 300, Taiwan TEL: 886-3-6668838 FAX: 886-3-6668836 0 Oct. 30. 2013 ® LY61L10248A 1M X 8 BIT HIGH SPEED CMOS SRAM Rev. 1.3 FEATURES GENERAL DESCRIPTION Fast access time : 8/10/12ns Very low power consumption: Operating current: 90/80/70mA(TYP. 8/10/12ns) Standby current(Normal version): 3mA(TYP.) Single 3.3V power supply All inputs and outputs TTL compatible Fully static operation Tri-state output Data retention voltage : 1.5V (MIN.) Green package available Package : 44-pin 400 mil TSOP-II 48-ball 6mmx8mm TFBGA The LY61L10248A is a 8M-bit high speed CMOS static random access memory organized as 1,024K words by 8 bits. It is fabricated using very high performance, high reliability CMOS technology. Its standby current is stable within the range of operating temperature. The LY61L10248A operates from a single power supply of 3.3V and all inputs and outputs are fully TTL compatible PRODUCT FAMILY Product Family LY61L10248A LY61L10248A(I) LY61L10248A LY61L10248A(I) Operating Temperature 0 ~ 70℃ -40 ~ 85℃ 0 ~ 70℃ -40 ~ 85℃ Vcc Range Speed 3.0 ~ 3.6V 3.0 ~ 3.6V 2.7 ~ 3.6V 2.7 ~ 3.6V 8/10/12ns 8/10/12ns 10/12ns 10/12ns Power Dissipation Standby(ISB1,TYP.) Operating(Icc1,TYP.) 3mA 90/80/70mA 3mA 90/80/70mA 3mA 80/70mA 80/70mA 3mA Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, lndustry E . Rd. 9, Science-Based Industrial Park, Hsinchu County 300, Taiwan TEL: 886-3-6668838 FAX: 886-3-6668836 1 ® LY61L10248A 1M X 8 BIT HIGH SPEED CMOS SRAM Rev. 1.3 FUNCTIONAL BLOCK DIAGRAM PIN DESCRIPTION Vcc Vss A0-A19 DECODER DQ0-DQ7 I/O DATA CIRCUIT CE# WE# OE# CONTROL CIRCUIT 1024Kx8 MEMORY ARRAY SYMBOL DESCRIPTION A0 - A19 Address Inputs DQ0 – DQ7 Data Inputs/Outputs CE# Chip Enable Inputs WE# Write Enable Input OE# Output Enable Input VCC Power Supply VSS Ground NC No Connection COLUMN I/O Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, lndustry E . Rd. 9, Science-Based Industrial Park, Hsinchu County 300, Taiwan TEL: 886-3-6668838 FAX: 886-3-6668836 2 ® LY61L10248A 1M X 8 BIT HIGH SPEED CMOS SRAM Rev. 1.3 PIN CONFIGURATION 44-pin TSOP(Type II) 48-ball 6mmx8mm TFBGA A NC OE# A0 A1 A2 NC B NC NC A3 A4 CE# NC C DQ0 NC A5 A6 NC DQ4 D Vss DQ1 A17 A7 E Vcc DQ2 NC A16 DQ6 Vss F DQ3 NC A14 A15 G NC NC A12 A13 WE# NC H A18 A8 A9 A10 A11 A19 1 2 3 4 TFBGA 5 6 DQ5 Vcc NC DQ7 TFBGA Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, lndustry E . Rd. 9, Science-Based Industrial Park, Hsinchu County 300, Taiwan TEL: 886-3-6668838 FAX: 886-3-6668836 3 ® LY61L10248A 1M X 8 BIT HIGH SPEED CMOS SRAM Rev. 1.3 ABSOLUTE MAXIMUN RATINGS* PARAMETER Voltage on VCC relative to VSS Voltage on any other pin relative to VSS SYMBOL VT1 VT2 RATING UNIT -0.5 to 4.6 V -0.5 to VCC+0.5 V 0 to 70(C grade) ℃ Operating Temperature TA -40 to 85(I grade) ℃ Storage Temperature TSTG -65 to 150 *Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to the absolute maximum rating conditions for extended period may affect device reliability. TRUTH TABLE MODE Standby Output Disable Read Write Note: CE# H L L L OE# X H L X WE# X H H L SUPPLY CURRENT ISB1 ICC ICC ICC I/O OPERATION High-Z High-Z DOUT DIN H = VIH, L = VIL, X = Don't care. DC ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL Supply Voltage VCC Input High Voltage Input Low Voltage Input Leakage Current Output Leakage Current VIH *2 VIL ILI Output High Voltage VOH Output Low Voltage *1 ILO VCC ≧ VIN ≧ VSS VCC ≧ VOUT ≧ VSS, Output Disabled MIN. 3.0 2.7 2.2 - 0.3 -1 TYP. 3.3 3.3 - *4 MAX. 3.6 3.6 VCC+0.3 0.8 1 UNIT V V V V µA -1 - 1 µA IOH = -4mA 2.4 - - V VOL IOL =8mA - - 0.4 V Icc CE# = VIL , II/O = 0mA ;f=max - 110 100 90 90 80 70 140 130 120 120 110 100 mA mA mA mA mA mA - - 40 mA - 3 25 mA Average Operating Power supply Current Icc1 Standby Power Supply Current Standby Power Supply Current TEST CONDITION -8 -10/12 Isb ISB1 -8 -10 -12 -8 -10 -12 CE# ≦0.2, Other pin is at 0.2V or Vcc-0.2V II/O = 0mA;f=max CE# ≧Vih Other pin is at Vil or Vih CE# ≧VCC - 0.2V; Other pin is at 0.2V or Vcc-0.2V Notes: 1. VIH(max) = VCC + 2.0V for pulse width less than 6ns. 2. VIL(min) = VSS - 2.0V for pulse width less than 6ns. 3. Over/Undershoot specifications are characterized on engineering evaluation stage, not for mass production test. 4. Typical values are included for reference only and are not guaranteed or tested. Typical valued are measured at VCC = VCC(TYP.) and TA = 25℃ Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, lndustry E . Rd. 9, Science-Based Industrial Park, Hsinchu County 300, Taiwan TEL: 886-3-6668838 FAX: 886-3-6668836 4 ® LY61L10248A 1M X 8 BIT HIGH SPEED CMOS SRAM Rev. 1.3 CAPACITANCE (TA = 25℃, f = 1.0MHz) PARAMETER Input Capacitance Input/Output Capacitance SYMBOL CIN CI/O MIN. MAX 8 10 - UNIT pF pF Note : These parameters are guaranteed by device characterization, but not production tested. AC TEST CONDITIONS speed Input Pulse Levels Input Rise and Fall Times Input and Output Timing Reference Levels Output Load 8ns/10/12ns 0.2V to Vcc-0.2V 3ns 1.5V CL = 30pF + 1TTL, IOH/IOL = -4mA/8mA AC ELECTRICAL CHARACTERISTICS (1) READ CYCLE PARAMETER Read Cycle Time Address Access Time Chip Enable Access Time Output Enable Access Time Chip Enable to Output in Low-Z Output Enable to Output in Low-Z Chip Disable to Output in High-Z Output Disable to Output in High-Z Output Hold from Address Change LY61L10248A -8 LY61L10248A -10 LY61L10248A -12 tRC tAA tACE tOE tCLZ* tOLZ* tCHZ* tOHZ* tOH MIN. 8 2 0 2 MIN. 10 2 0 2 MIN. 12 3 0 2 SYM. LY61L10248A -8 LY61L10248A -10 LY61L10248A -12 MIN. 8 6.5 6.5 0 6.5 0 MAX. - MIN. 10 8 8 0 8 0 MAX. - MIN. 12 10 10 0 10 0 MAX. - ns ns ns ns ns ns 5 - 6 - 7 - ns 0 2 - 3 0 2 - 4 0 2 - 5 ns ns ns SYM. MAX. 8 8 4.5 3 3 - MAX. 10 10 4.5 4 4 - MAX. 12 12 5 5 5 - UNIT ns ns ns ns ns ns ns ns ns (2) WRITE CYCLE PARAMETER Data to Write Time Overlap tWC tAW tCW tAS tWP tWR tDW Data Hold from End of Write Time Output Active from End of Write Write to Output in High-Z tDH tOW* tWHZ* Write Cycle Time Address Valid to End of Write Chip Enable to End of Write Address Set-up Time Write Pulse Width Write Recovery Time *These parameters are guaranteed by device characterization, but not production tested. TIMING WAVEFORMS Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, lndustry E . Rd. 9, Science-Based Industrial Park, Hsinchu County 300, Taiwan TEL: 886-3-6668838 FAX: 886-3-6668836 5 UNIT ® LY61L10248A 1M X 8 BIT HIGH SPEED CMOS SRAM Rev. 1.3 READ CYCLE 1 (Address Controlled) (1,2) tRC Address tAA Dout tOH Previous Data Valid Data Valid READ CYCLE 2 (CE# and OE# Controlled) (1,3,4,5) tRC Address tAA CE# tACE OE# tOE tOH tOHZ tCHZ tOLZ tCLZ Dout High-Z Data Valid High-Z Notes : 1.WE# is high for read cycle. 2.Device is continuously selected OE# = low, CE# = low. 3.Address must be valid prior to or coincident with CE# = low,; otherwise tAA is the limiting parameter. 4.tCLZ, tOLZ, tCHZ and tOHZ are specified with CL = 5pF. Transition is measured ±500mV from steady state. 5.At any given temperature and voltage condition, tCHZ is less than tCLZ , tOHZ is less than tOLZ. Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, lndustry E . Rd. 9, Science-Based Industrial Park, Hsinchu County 300, Taiwan TEL: 886-3-6668838 FAX: 886-3-6668836 6 ® LY61L10248A 1M X 8 BIT HIGH SPEED CMOS SRAM Rev. 1.3 WRITE CYCLE 1 (WE# Controlled) (1,2,3,5,6) tWC Address tAW CE# tCW tAS tWP tWR WE# tWHZ Dout TOW High-Z (4) tDW (4) tDH Data Valid Din WRITE CYCLE 2 (CE# Controlled) (1,2,5,6) tWC Address tAW CE# tAS tWR tCW tWP WE# tWHZ Dout High-Z (4) tDW tDH Data Valid Din Notes : 1.WE#, CE# must be high during all address transitions. 2.A write occurs during the overlap of a low CE#, low WE#. 3.During a WE# controlled write cycle with OE# low, tWP must be greater than tWHZ + tDW to allow the drivers to turn off and data to be placed on the bus. 4.During this period, I/O pins are in the output state, and input signals must not be applied. 5.If the CE# low transition occurs simultaneously with or after WE# low transition, the outputs remain in a high impedance state. 6.tOW and tWHZ are specified with CL = 5pF. Transition is measured ±500mV from steady state. Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, lndustry E . Rd. 9, Science-Based Industrial Park, Hsinchu County 300, Taiwan TEL: 886-3-6668838 FAX: 886-3-6668836 7 ® LY61L10248A 1M X 8 BIT HIGH SPEED CMOS SRAM Rev. 1.3 DATA RETENTION CHARACTERISTICS PARAMETER VCC for Data Retention Data Retention Current Chip Disable to Data Retention Time Recovery Time tRC* = Read Cycle Time SYMBOL TEST CONDITION VDR CE# ≧ VCC - 0.2V VCC =1.5V IDR CE# ≧VCC - 0.2V; Other pin is at 0.2V or Vcc-0.2V See Data Retention tCDR Waveforms (below) tR MIN. 1.5 TYP. - MAX. 3.6 UNIT V - 3 25 mA 0 - - ns tRC* - - ns DATA RETENTION WAVEFORM VDR ≧ 1.5V Vcc Vcc(min.) Vcc(min.) tCDR CE# VIH tR CE# ≧ Vcc-0.2V VIH Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, lndustry E . Rd. 9, Science-Based Industrial Park, Hsinchu County 300, Taiwan TEL: 886-3-6668838 FAX: 886-3-6668836 8 ® LY61L10248A 1M X 8 BIT HIGH SPEED CMOS SRAM Rev. 1.3 PACKAGE OUTLINE DIMENSION 44-pin 400mil TSOP-Ⅱ Package Outline Dimension SYMBOLS A A1 A2 b c D E E1 e L ZD y Θ DIMENSIONS IN MILLMETERS MIN. NOM. MAX. 1.20 0.05 0.10 0.15 0.95 1.00 1.05 0.30 0.45 0.12 0.21 18.212 18.415 18.618 11.506 11.760 12.014 9.957 10.160 10.363 0.800 0.40 0.50 0.60 0.805 0.076 o o o 3 6 0 DIMENSIONS IN MILS MIN. NOM. MAX. 47.2 2.0 3.9 5.9 37.4 39.4 41.3 11.8 17.7 4.7 8.3 717 725 733 453 463 473 392 400 408 31.5 15.7 19.7 23.6 31.7 3 o o o 0 3 6 Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, lndustry E . Rd. 9, Science-Based Industrial Park, Hsinchu County 300, Taiwan TEL: 886-3-6668838 FAX: 886-3-6668836 9 ® LY61L10248A 1M X 8 BIT HIGH SPEED CMOS SRAM Rev. 1.3 48-ball 6mm × 8mm TFBGA Package Outline Dimension Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, lndustry E . Rd. 9, Science-Based Industrial Park, Hsinchu County 300, Taiwan TEL: 886-3-6668838 FAX: 886-3-6668836 10 ® LY61L10248A 1M X 8 BIT HIGH SPEED CMOS SRAM Rev. 1.3 ORDERING INFORMATION Package Type Access Time (Speed)(ns) 44Pin(400mil) TSOP-II 8 Temperature Range(℃) 0℃~70℃ -40℃~85℃ 10 0℃~70℃ -40℃~85℃ 12 0℃~70℃ -40℃~85℃ 48-ball(6mmx8mm) TFBGA 8 0℃~70℃ -40℃~85℃ 10 0℃~70℃ -40℃~85℃ 12 0℃~70℃ -40℃~85℃ Packing Type Tray LY61L10248AML-8 Tape Reel LY61L10248AML-8T Tray LY61L10248AML-8I Tape Reel LY61L10248AML-8IT Tray LY61L10248AML-10 Tape Reel LY61L10248AML-10T Tray LY61L10248AML-10I Tape Reel LY61L10248AML-10IT Tray LY61L10248AML-12 Tape Reel LY61L10248AML-12T Tray LY61L10248AML-12I Tape Reel LY61L10248AML-12IT Tray LY61L10248AGL-8 Tape Reel LY61L10248AGL-8T Tray LY61L10248AGL-8I Tape Reel LY61L10248AGL-8IT Tray LY61L10248AGL-10 Tape Reel LY61L10248AGL-10T Tray LY61L10248AGL-10I Tape Reel LY61L10248AGL-10IT Tray LY61L10248AGL-12 Tape Reel LY61L10248AGL-12T Tray LY61L10248AGL-12I Tape Reel LY61L10248AGL-12IT Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, lndustry E . Rd. 9, Science-Based Industrial Park, Hsinchu County 300, Taiwan TEL: 886-3-6668838 FAX: 886-3-6668836 11 Lyontek Item No. ® LY61L10248A 1M X 8 BIT HIGH SPEED CMOS SRAM Rev. 1.3 THIS PAGE IS LEFT BLANK INTENTIONALLY. Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, lndustry E . Rd. 9, Science-Based Industrial Park, Hsinchu County 300, Taiwan TEL: 886-3-6668838 FAX: 886-3-6668836 12