ON MC74AC374DTR2 Octal d−type flip−flop with 3−state output Datasheet

MC74AC374, MC74ACT374
Octal D−Type Flip−Flop with
3−State Outputs
The MC74AC374/74ACT374 is a high−speed, low−power octal
D−type flip−flop featuring separate D−type inputs for each flip−flop
and 3−state outputs for bus−oriented applications. A buffered Clock
(CP) and Output Enable (OE) are common to all flip−flops.
http://onsemi.com
Features
•
•
•
•
•
•
•
•
•
•
Buffered Positive Edge−Triggered Clock
3−State Outputs for Bus−Oriented Applications
Outputs Source/Sink 24 mA
See MC74AC273 for Reset Version
See MC74AC377 for Clock Enable Version
See MC74AC373 for Transparent Latch Version
See MC74AC574 for Broadside Pinout Version
See MC74AC564 for Broadside Pinout Version with Inverted
Outputs
′ACT374 Has TTL Compatible Inputs
Pb−Free Packages are Available
VCC
O7
D7
D6
O6
O5
D5
D4
O4
CP
20
19
18
17
16
15
14
13
12
11
PDIP−20
N SUFFIX
CASE 738
1
SOIC−20W
DW SUFFIX
CASE 751D
1
TSSOP−20
DT SUFFIX
CASE 948E
1
SOEIAJ−20
M SUFFIX
CASE 967
1
1
2
3
4
5
6
7
8
9
10
DEVICE MARKING INFORMATION
OE
O0
D0
D1
O1
O2
D2
D3
O3
GND
See general marking information in the device marking
section on page 6 of this data sheet.
Figure 1. Pinout: 20 Lead Packages Conductors
(Top View)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 7 of this data sheet.
PIN ASSIGNMENT
PIN
FUNCTION
D0−D7
Data Inputs
CP
Clock Pulse Input
CP
OE
3−State Output Enable Input
OE
O0−O7
3−State Outputs
D0 D1 D2 D3 D4 D5 D6 D7
O0 O1 O2 O3 O4 O5 O6 O7
Figure 2. Logic Symbol
© Semiconductor Components Industries, LLC, 2006
November, 2006 − Rev. 8
1
Publication Order Number:
MC74AC374/D
MC74AC374, MC74ACT374
FUNCTIONAL DESCRIPTION
The MC74AC374/74ACT374 consists of eight edge−
triggered flip−flops with individual D−type inputs and
3−state true outputs. The buffered clock and buffered Output
Enable are common to all flip−flops. The eight flip−flops
will store the state of their individual D inputs that meet the
setup and hold time requirements on the LOW−to−HIGH
Clock (CP) transition. With the Output Enable (OE) LOW,
the contents of the eight flip−flops are available at the
outputs. When the OE is HIGH, the outputs go to the high
impedance state. Operation of the OE input does not affect
the state of the flip−flops.
TRUTH TABLE
Inputs
Dn
H
L
X
Outputs
CP
OE
On
X
L
L
H
H
L
Z
H = HIGH Voltage Level
L = LOW Voltage Level
X = Immaterial
Z = High Impedance
= LOW-to-HIGH Transition
D0
D1
D2
D3
D4
D5
D6
D7
CP
CP
Q
D
Q
CP
Q
D
Q
CP
Q
D
Q
CP
Q
D
Q
CP
Q
D
Q
CP
Q
D
Q
CP
Q
D
Q
CP
Q
D
Q
OE
O0
O1
NOTE:
O2
O3
O4
O5
O6
O7
That this diagram is provided only for the understanding of logic
operations and should not be used to estimate propagation delays.
Figure 3. Logic Diagram
MAXIMUM RATINGS
Symbol
Parameter
Value
Unit
VCC
DC Supply Voltage (Referenced to GND)
−0.5 to +7.0
V
VIN
DC Input Voltage (Referenced to GND)
−0.5 to VCC +0.5
V
DC Output Voltage (Referenced to GND)
−0.5 to VCC +0.5
V
DC Input Current, per Pin
±20
mA
IOUT
DC Output Sink/Source Current, per Pin
±50
mA
ICC
DC VCC or GND Current per Output Pin
±50
mA
Tstg
Storage Temperature
−65 to +150
°C
VOUT
IIN
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
http://onsemi.com
2
MC74AC374, MC74ACT374
RECOMMENDED OPERATING CONDITIONS
Symbol
VCC
VIN, VOUT
tr, tf
Parameter
Supply Voltage
Min
Typ
Max
′AC
2.0
5.0
6.0
′ACT
4.5
5.0
5.5
DC Input Voltage, Output Voltage (Ref. to GND)
0
Input Rise and Fall Time (Note 1)
′AC Devices except Schmitt Inputs
tr, tf
Input Rise and Fall Time (Note 2)
′ACT Devices except Schmitt Inputs
TJ
Junction Temperature (PDIP)
Unit
V
VCC
VCC @ 3.0 V
−
150
−
VCC @ 4.5 V
−
40
−
VCC @ 5.5 V
−
25
−
VCC @ 4.5 V
−
10
−
VCC @ 5.5 V
−
8.0
−
−
−
140
V
ns/V
ns/V
°C
TA
Operating Ambient Temperature Range
−40
25
85
°C
IOH
Output Current − High
−
−
−24
mA
IOL
Output Current − Low
−
−
24
mA
1. VIN from 30% to 70% VCC; see individual Data Sheets for devices that differ from the typical input rise and fall times.
2. VIN from 0.8 V to 2.0 V; see individual Data Sheets for devices that differ from the typical input rise and fall times.
DC CHARACTERISTICS
74AC
Symbol
Parameter
VCC
(V)
74AC
TA = +25°C
Typ
VIH
VIL
VOH
VOL
TA = −40°C to +85°C
Unit
Conditions
Guaranteed Limits
Minimum High Level
Input Voltage
3.0
4.5
5.5
1.5
2.25
2.75
2.1
3.15
3.85
2.1
3.15
3.85
V
VOUT = 0.1 V
or VCC − 0.1 V
Maximum Low Level
Input Voltage
3.0
4.5
5.5
1.5
2.25
2.75
0.9
1.35
1.65
0.9
1.35
1.65
V
VOUT = 0.1 V
or VCC − 0.1 V
Minimum High Level
Output Voltage
3.0
4.5
5.5
2.99
4.49
5.49
2.9
4.4
5.4
2.9
4.4
5.4
V
3.0
4.5
5.5
−
−
−
2.56
3.86
4.86
2.46
3.76
4.76
3.0
4.5
5.5
0.002
0.001
0.001
0.1
0.1
0.1
0.1
0.1
0.1
3.0
4.5
5.5
−
−
−
0.36
0.36
0.36
0.44
0.44
0.44
Maximum Low Level
Output Voltage
IOUT = −50 mA
V
*VIN = VIL or VIH
−12 mA
IOH
−24 mA
−24 mA
IOUT = 50 mA
V
V
*VIN = VIL or VIH
12 mA
IOL
24 mA
24 mA
IIN
Maximum Input
Leakage Current
5.5
−
±0.1
±1.0
mA
VI = VCC, GND
IOZ
Maximum
3-State
Current
5.5
−
±0.5
±5.0
mA
VI (OE) = VIL, VIH
VI = VCC, GND
VO = VCC, GND
5.5
−
−
75
mA
VOLD = 1.65 V Max
5.5
−
−
−75
mA
VOHD = 3.85 V Min
mA
VIN = VCC or GND
IOLD
IOHD
†Minimum Dynamic
Output Current
ICC
Maximum Quiescent Supply Current
5.5
−
8.0
80
*All outputs loaded; thresholds on input associated with output under test.
†Maximum test duration 2.0 ms, one output loaded at a time.
NOTE: IIN and ICC @ 3.0 V are guaranteed to be less than or equal to the respective limit @ 5.5 V VCC.
http://onsemi.com
3
MC74AC374, MC74ACT374
AC CHARACTERISTICS (For Figures and Waveforms − See AND8277/D at www.onsemi.com)
Symbol
Parameter
VCC*
(V)
74AC
74AC
TA = +25°C
CL = 50 pF
TA = −40°C
to +85°C
CL = 50 pF
Unit
Fig.
No.
Min
Typ
Max
Min
Max
fmax
Maximum Clock
Frequency
3.3
5.0
60
100
110
155
−
−
60
100
−
−
MHz
3−3
tPLH
Propagation Delay
CP to On
3.3
5.0
3.0
2.5
11
8.0
13.5
9.5
1.5
1.5
15.5
10.5
ns
3−6
tPHL
Propagation Delay
CP to On
3.3
5.0
2.5
2.0
10
7.0
12.5
9.0
2.0
1.5
14
10
ns
3−6
tPZH
Output Enable Time
3.3
5.0
3.0
2.0
9.5
7.0
11.5
8.5
1.5
1.0
13
9.5
ns
3−7
tPZL
Output Enable Time
3.3
5.0
2.5
2.0
9.0
6.5
11.5
8.5
1.5
1.0
13
9.5
ns
3−8
tPHZ
Output Disable Time
3.3
5.0
3.0
2.0
10.5
8.0
12.5
11
2.0
2.0
14.5
12.5
ns
3−7
tPLZ
Output Disable Time
3.3
5.0
2.0
1.5
8.0
6.5
11.5
8.5
1.0
1.0
12.5
10
ns
3−8
*Voltage Range 3.3 V is 3.3 V ±0.3 V.
Voltage Range 5.0 V is 5.0 V ±0.5 V.
AC OPERATING REQUIREMENTS
Symbol
VCC*
(V)
Parameter
Typ
74AC
74AC
TA = +25°C
CL = 50 pF
TA = −40°C
to +85°C
CL = 50 pF
Unit
Fig.
No.
Guaranteed Minimum
ts
Setup Time, HIGH or LOW
Dn to CP
3.3
5.0
2.0
1.0
5.5
4.0
6.0
4.5
ns
3−9
th
Hold Time, HIGH or LOW
Dn to CP
3.3
5.0
−1.0
0
1.0
1.5
1.0
1.5
ns
3−9
3.3
5.0
4.0
2.5
5.5
4.0
6.0
4.5
ns
3−6
CP Pulse Width
HIGH or LOW
*Voltage Range 3.3 V is 3.3 V ±0.3 V.
Voltage Range 5.0 V is 5.0 V ±0.5 V.
tw
http://onsemi.com
4
MC74AC374, MC74ACT374
DC CHARACTERISTICS
Symbol
Parameter
VCC
(V)
74ACT
74ACT
TA = +25°C
TA =
−40°C to +85°C
Typ
Unit
Conditions
Guaranteed Limits
VIH
Minimum High Level
Input Voltage
4.5
5.5
1.5
1.5
2.0
2.0
2.0
2.0
V
VOUT = 0.1 V
or VCC − 0.1 V
VIL
Maximum Low Level
Input Voltage
4.5
5.5
1.5
1.5
0.8
0.8
0.8
0.8
V
VOUT = 0.1 V
or VCC − 0.1 V
VOH
Minimum High Level
Output Voltage
4.5
5.5
4.49
5.49
4.4
5.4
4.4
5.4
V
4.5
5.5
−
−
3.86
4.86
3.76
4.76
4.5
5.5
0.001
0.001
0.1
0.1
0.1
0.1
4.5
5.5
−
−
0.36
0.36
0.44
0.44
V
*VIN = VIL or VIH
24 mA
IOL
24 mA
Maximum Input
Leakage Current
5.5
−
±0.1
±1.0
mA
VI = VCC, GND
Additional Max. ICC/Input
5.5
0.6
−
1.5
mA
VI = VCC − 2.1 V
Maximum
3-State
Current
5.5
−
±0.5
±5.0
mA
VI (OE) = VIL, VIH
VI = VCC, GND
VO = VCC, GND
5.5
−
−
75
mA
VOLD = 1.65 V Max
5.5
−
−
−75
mA
VOHD = 3.85 V Min
5.5
−
8.0
80
mA
VIN = VCC or GND
VOL
IIN
DICCT
IOZ
IOLD
IOHD
ICC
Maximum Low Level
Output Voltage
†Minimum Dynamic
Output Current
Maximum Quiescent
Supply Current
IOUT = −50 mA
*VIN = VIL or VIH
IOH −24 mA
−24 mA
V
IOUT = 50 mA
V
*All outputs loaded; thresholds on input associated with output under test.
†Maximum test duration 2.0 ms, one output loaded at a time.
AC CHARACTERISTICS (For Figures and Waveforms − See AND8277/D at www.onsemi.com)
Symbol
Parameter
VCC*
(V)
74ACT
74ACT
TA = +25°C
CL = 50 pF
TA = −40°C
to +85°C
CL = 50 pF
Unit
Fig.
No.
Min
Typ
Max
Min
Max
5.0
100
160
−
90
−
MHz
3−3
Propagation Delay
CP to On
5.0
2.0
8.5
10
2.0
11.5
ns
3−6
tPHL
Propagation Delay
CP to On
5.0
2.0
8.0
9.5
1.5
11
ns
3−6
tPZH
Output Enable Time
5.0
2.0
8.0
9.5
1.5
10.5
ns
3−7
fmax
Maximum Clock
Frequency
tPLH
tPZL
Output Enable Time
5.0
1.5
8.0
9.0
1.5
10.5
ns
3−8
tPHZ
Output Disable Time
5.0
1.5
8.5
11.5
1.0
12.5
ns
3−7
tPLZ
Output Disable Time
5.0
1.5
7.0
8.5
1.0
10
ns
3−8
*Voltage Range 5.0 V is 5.0 V ±0.5 V.
http://onsemi.com
5
MC74AC374, MC74ACT374
AC OPERATING REQUIREMENTS (For Figures and Waveforms − See AND8277/D at www.onsemi.com)
Symbol
VCC*
(V)
Parameter
74ACT
74ACT
TA = +25°C
CL = 50 pF
TA = −40°C
to +85°C
CL = 50 pF
Typ
Guaranteed Minimum
Unit
Fig.
No.
ts
Setup Time, HIGH or LOW
Dn to CP
5.0
1.0
5.0
5.5
ns
3−9
th
Hold Time, HIGH or LOW
Dn to CP
5.0
0
1.5
1.5
ns
3−9
5.0
2.5
5.0
5.0
ns
3−6
CP Pulse Width
HIGH or LOW
*Voltage Range 5.0 V is 5.0 V ±0.5 V.
tw
CAPACITANCE
Symbol
Parameter
Value
Typ
Unit
Test Conditions
CIN
Input Capacitance
4.5
pF
VCC = 5.0 V
CPD
Power Dissipation Capacitance
80
pF
VCC = 5.0 V
MARKING DIAGRAMS
PDIP−20
SOIC−20W
TSSOP−20
20
20
20
1
1
1
20
20
20
74AC374
AWLYWWG
1
20
ACT
374
ALYWG
G
ACT374
AWLYYWWG
MC74ACT374N
AWLYYWWG
20
AC
374
ALYWG
G
AC374
AWLYYWWG
MC74AC374N
AWLYYWWG
SOEIAJ−20
1
1
1
A
= Assembly Location
WL, L
= Wafer Lot
YY, Y
= Year
WW, W = Work Week
G or G
= Pb−Free Package
(Note: Microdot may be in either location)
http://onsemi.com
6
74ACT374
AWLYWWG
1
MC74AC374, MC74ACT374
ORDERING INFORMATION
Device
Package
MC74AC374N
PDIP−20
MC74AC374NG
PDIP−20
(Pb−Free)
MC74ACT374N
PDIP−20
MC74ACT374NG
PDIP−20
(Pb−Free)
MC74AC374DW
SOIC−20
MC74AC374DWG
SOIC−20
(Pb−Free)
MC74AC374DWR2
SOIC−20
MC74AC374DWR2G
SOIC−20
(Pb−Free)
MC74ACT374DW
SOIC−20
MC74ACT374DWG
SOIC−20
(Pb−Free)
MC74ACT374DWR2
SOIC−20
MC74ACT374DWR2G
SOIC−20
(Pb−Free)
MC74AC374DTR2
TSSOP−20*
MC74AC374DTR2G
TSSOP−20*
MC74ACT374DTR2
TSSOP−20*
MC74ACT374DTR2G
TSSOP−20*
MC74AC374MEL
SOEIAJ−20
MC74AC374MELG
SOEIAJ−20
(Pb−Free)
MC74ACT374MEL
SOEIAJ−20
MC74ACT374MELG
SOEIAJ−20
(Pb−Free)
Shipping †
18 Units / Rail
38 Units / Rail
1000 / Tape & Reel
38 Units / Rail
1000 / Tape & Reel
2500 / Tape & Reel
2500 / Tape & Reel
2000 / Tape & Reel
2000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*These packages are inherently Pb−Free.
http://onsemi.com
7
MC74AC374, MC74ACT374
PACKAGE DIMENSIONS
PDIP−20
N SUFFIX
PLASTIC DIP PACKAGE
CASE 738−03
ISSUE E
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION L TO CENTER OF LEAD WHEN
FORMED PARALLEL.
4. DIMENSION B DOES NOT INCLUDE MOLD
FLASH.
−A−
20
11
1
10
B
L
C
−T−
K
SEATING
PLANE
M
N
E
G
F
J
D
20 PL
0.25 (0.010)
20 PL
0.25 (0.010)
M
T A
M
T B
M
DIM
A
B
C
D
E
F
G
J
K
L
M
N
INCHES
MIN
MAX
1.010
1.070
0.240
0.260
0.150
0.180
0.015
0.022
0.050 BSC
0.050
0.070
0.100 BSC
0.008
0.015
0.110
0.140
0.300 BSC
0_
15 _
0.020
0.040
MILLIMETERS
MIN
MAX
25.66
27.17
6.10
6.60
3.81
4.57
0.39
0.55
1.27 BSC
1.27
1.77
2.54 BSC
0.21
0.38
2.80
3.55
7.62 BSC
0_
15_
0.51
1.01
M
SOIC−20W
DW SUFFIX
CASE 751D−05
ISSUE G
20
11
X 45 _
h
1
10
20X
B
B
0.25
M
T A
S
B
S
A
L
H
M
E
0.25
10X
NOTES:
1. DIMENSIONS ARE IN MILLIMETERS.
2. INTERPRET DIMENSIONS AND TOLERANCES
PER ASME Y14.5M, 1994.
3. DIMENSIONS D AND E DO NOT INCLUDE MOLD
PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE.
5. DIMENSION B DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE PROTRUSION
SHALL BE 0.13 TOTAL IN EXCESS OF B
DIMENSION AT MAXIMUM MATERIAL
CONDITION.
q
A
B
M
D
18X
e
A1
SEATING
PLANE
C
T
http://onsemi.com
8
DIM
A
A1
B
C
D
E
e
H
h
L
q
MILLIMETERS
MIN
MAX
2.35
2.65
0.10
0.25
0.35
0.49
0.23
0.32
12.65
12.95
7.40
7.60
1.27 BSC
10.05
10.55
0.25
0.75
0.50
0.90
0_
7_
MC74AC374, MC74ACT374
PACKAGE DIMENSIONS
TSSOP−20
DT SUFFIX
CASE 948E−02
ISSUE C
20X
0.15 (0.006) T U
2X
K REF
0.10 (0.004)
S
L/2
20
M
T U
S
V
K
K1
ÍÍÍÍ
ÍÍÍÍ
ÍÍÍÍ
S
J J1
11
B
−U−
L
PIN 1
IDENT
SECTION N−N
0.25 (0.010)
N
1
10
M
0.15 (0.006) T U
S
A
−V−
N
F
DETAIL E
C
G
D
H
DETAIL E
0.100 (0.004)
−T− SEATING
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION:
MILLIMETER.
3. DIMENSION A DOES NOT INCLUDE
MOLD FLASH, PROTRUSIONS OR GATE
BURRS. MOLD FLASH OR GATE BURRS
SHALL NOT EXCEED 0.15 (0.006) PER SIDE.
4. DIMENSION B DOES NOT INCLUDE
INTERLEAD FLASH OR PROTRUSION.
INTERLEAD FLASH OR PROTRUSION
SHALL NOT EXCEED 0.25 (0.010) PER SIDE.
5. DIMENSION K DOES NOT INCLUDE
DAMBAR PROTRUSION. ALLOWABLE
DAMBAR PROTRUSION SHALL BE 0.08
(0.003) TOTAL IN EXCESS OF THE K
DIMENSION AT MAXIMUM MATERIAL
CONDITION.
6. TERMINAL NUMBERS ARE SHOWN FOR
REFERENCE ONLY.
7. DIMENSION A AND B ARE TO BE
DETERMINED AT DATUM PLANE −W−.
MILLIMETERS
INCHES
DIM MIN
MAX
MIN
MAX
A
6.40
6.60
0.252
0.260
B
4.30
4.50
0.169
0.177
−−−
−−− 0.047
C
1.20
D
0.05
0.15
0.002
0.006
F
0.50
0.75
0.020
0.030
G
0.65 BSC
0.026 BSC
−W−
H
0.27
0.37
0.011
0.015
J
0.09
0.20
0.004
0.008
J1
0.09
0.16
0.004
0.006
K
0.19
0.30
0.007
0.012
K1
0.19
0.25
0.007
0.010
L
6.40 BSC
0.252 BSC
M
0_
8_
0_
8_
PLANE
SOLDERING FOOTPRINT*
7.06
1
0.65
PITCH
16X
0.36
16X
1.26
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
9
MC74AC374, MC74ACT374
PACKAGE DIMENSIONS
SOEIAJ−20
M SUFFIX
CASE 967−01
ISSUE A
20
LE
11
Q1
E HE
1
M_
L
10
DETAIL P
Z
D
VIEW P
e
A
c
DIM
A
A1
b
c
D
E
e
HE
L
LE
M
Q1
Z
A1
b
0.13 (0.005)
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSIONS D AND E DO NOT INCLUDE
MOLD FLASH OR PROTRUSIONS AND ARE
MEASURED AT THE PARTING LINE. MOLD FLASH
OR PROTRUSIONS SHALL NOT EXCEED 0.15
(0.006) PER SIDE.
4. TERMINAL NUMBERS ARE SHOWN FOR
REFERENCE ONLY.
5. THE LEAD WIDTH DIMENSION (b) DOES NOT
INCLUDE DAMBAR PROTRUSION. ALLOWABLE
DAMBAR PROTRUSION SHALL BE 0.08 (0.003)
TOTAL IN EXCESS OF THE LEAD WIDTH
DIMENSION AT MAXIMUM MATERIAL CONDITION.
DAMBAR CANNOT BE LOCATED ON THE LOWER
RADIUS OR THE FOOT. MINIMUM SPACE
BETWEEN PROTRUSIONS AND ADJACENT LEAD
TO BE 0.46 ( 0.018).
M
0.10 (0.004)
MILLIMETERS
MIN
MAX
−−−
2.05
0.05
0.20
0.35
0.50
0.15
0.25
12.35
12.80
5.10
5.45
1.27 BSC
7.40
8.20
0.50
0.85
1.10
1.50
10 _
0_
0.70
0.90
−−−
0.81
INCHES
MIN
MAX
−−− 0.081
0.002
0.008
0.014
0.020
0.006
0.010
0.486
0.504
0.201
0.215
0.050 BSC
0.291
0.323
0.020
0.033
0.043
0.059
10 _
0_
0.028
0.035
−−− 0.032
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
10
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MC74AC374/D
Similar pages