SIPAT Co.,Ltd www.sipatsaw.com China Electronics Technology Group Corporation No.26 Research Institute LBN7022 SAW Filter Electrical Characteristic Specifications Parameter Unit Minimum Typical Maximum Center Frequency Insertion Loss MHz 69.89 70 70.11 22.9 25 1 dB Bandwidth MHz 8 8.3 3 dB Bandwidth MHz 8.5 8.9 40 dB Bandwidth MHz 10.8 11.1 Passband Variation dB 0.5 0.8 Phase Linearity degrees 1 .8 5 Group Delay Variation nsec 35 60 Absolute Delay usec 2 Ultimate Rejection dB dB 60 YZ LiNbO3 Subatrate Material Ambient Temperature 50 °C 25 DIP2212 (22.2x12.6x5.2mm3) Package Size Typical Performance Package Outline Matching Configuration Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. P.O. Box 2513 Chongqing, China 400060 Tel:+86-23-62920684 Fax:62805284 E-mail: [email protected]