IDT74SSTVF16857 14-BIT REGISTERED BUFFER WITH SSTL I/O COMMERCIAL TEMPERATURE RANGE 14-BIT REGISTERED BUFFER WITH SSTL I/O FEATURES: IDT74SSTVF16857 DESCRIPTION: • • • • • • • • 2.3V to 2.7V Operation SSTL_2 Class I style data inputs/outputs Differential CLK input RESET control compatible with LVCMOS levels Flow-through architecture for optimum PCB design Drive up to equivalent of 14 SDRAM loads Latch-up performance exceeds 100mA ESD >2000V per MIL-STD-883, Method 3015; >200V using machine model (C = 200pF, R = 0) • Available in TSSOP package The SSTVF16857 is a 14-bit registered buffer designed for 2.3V-2.7V VDD and supports low standby operation. All data inputs and outputs are SSTL_2 level compatible with JEDEC standard for SSTL_2. RESET is an LVCMOS input since it must operate predictably during the power-up phase. RESET, which can be operated independent of CLK and CLK, must be held in the low state during power-up in order to ensure predictable outputs (low state) before a stable clock has been applied. RESET, when in the low state, will disable all input receivers, reset all registers, and force all outputs to a low state, before a stable clock has been applied. With inputs held low and a stable clock applied, outputs will remain low during the Low-to-High transition of RESET. APPLICATIONS: • Along with CSPT857C, Zero Delay PLL Clock buffer, provides complete solution for DDR1 DIMMs FUNCTIONAL BLOCK DIAGRAM RESET CLK CLK VREF D1 34 38 39 35 48 1D C1 1 Q1 R TO 13 OTHER CHANNELS The IDT logo is a registered trademark of Integrated Device Technology, Inc. COMMERCIAL TEMPERATURE RANGE JUNE 2003 1 c 2003 Integrated Device Technology, Inc. DSC-6198/7 IDT74SSTVF16857 14-BIT REGISTERED BUFFER WITH SSTL I/O COMMERCIAL TEMPERATURE RANGE PIN CONFIGURATION ABSOLUTE MAXIMUM RATINGS (1) Symbol VDD or VDDQ Q1 1 48 (2) Description Supply Voltage Range Max. Unit –0.5 to 3.6 V D1 VI Input Voltage Range –0.5 to VDD +0.5 V VO(3) Output Voltage Range –0.5 to VDDQ +0.5 V Q2 2 47 D2 GND 3 46 GND VDDQ 4 45 VDD Q3 5 44 D3 Q4 6 43 D4 Q5 7 42 D5 GND 8 41 D6 VDDQ 9 40 D7 Q6 10 39 CLK Q7 11 38 CLK VDDQ 12 37 VDD GND 13 36 GND Q8 14 35 VREF Q9 15 34 RESET VDDQ 16 33 D8 GND 17 32 D9 Q10 18 31 D10 Q11 19 30 D11 Q12 20 29 D12 VDDQ 21 28 VDD GND 22 27 GND Q13 23 26 D13 Q14 24 25 D14 IIK Input Clamp Current, VI < 0 –50 mA IOK Output Clamp Current, ±50 mA ±50 mA ±100 mA –65 to +150 °C VO < 0 or VO > VDDQ IO Continuous Output Current, VO = 0 to VDDQ VDD Continuous Current through each VDD, VDDQ or GND TSTG Storage Temperature Range NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. The input and output negative voltage ratings may be exceeded if the ratings of the I/P and O/P clamp current are observed. 3. The output current will flow if the following conditions are observed: a) Output in HIGH state b) VO = VDDQ FUNCTION TABLE (1) Input TSSOP TOP VIEW RESET CLK CLK D Q Outputs H ↑ ↓ L L H ↑ ↓ H H H L or H L or H X Qo(2) L X X X L NOTES: 1. H = HIGH Voltage Level L = LOW Voltage Level X = Don’t Care ↑ = LOW to HIGH ↓ = HIGH to LOW 2. Qo = Output level before the indicated steady-state conditions were established. 2 IDT74SSTVF16857 14-BIT REGISTERED BUFFER WITH SSTL I/O COMMERCIAL TEMPERATURE RANGE DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE Following Conditions Apply Unless Otherwise Specified: Operating Condition: TA = 0°C to +70°C, VDD = 2.5V ±0.2V, VDDQ = 2.5V ±0.2V Symbol VIK Parameter Test Conditions Control Inputs VDD = 2.3V, II = −18mA Min. VDD = 2.3V to 2.7V, IOH = -100µA VOH VDD = 2.3V, IOH = -8mA VOL II IDD IDDD Typ. Max. Unit — — –1.2 V VDD – 0.2 — — V 1.95 — — VDD = 2.3V to 2.7V, IOL = 100µA — — 0.2 VDD = 2.3V, IOL = 8mA — — 0.35 All Inputs VDD = 2.7V, VI = VDD or GND — — ±5 µA Static Standby IO = 0, VDD = 2.7V, RESET = GND — — 0.01 mA Static Operating IO = 0, VDD = 2.7V, RESET = VDD, VI = VIH (AC) or VIL (AC) — 6 — Dynamic Operating (Clock Only) IO = 0, VDD = 2.7V, RESET = VDD, VI = VIH (AC) or VIL (AC), — — — CLK and CLK Switching 50% Duty Cycle. µA/Clock MHz Dynamic Operating IO = 0, VDD = 2.7V, RESET = VDD, VI = VIH (AC) or VIL (AC), (Per Each Data Input) CLK and CLK Switching 50% Duty Cycle. One Data Input — — — Data Inputs VDD = 2.5V, VI = VREF ± 310mV 2.5 — 3.5 CLK and CLK VICR = 1.25V, VI (PP) = 360mV 2.5 — 3.5 RESET VI = VDD or GND — — — µA/Clock MHz/Data Switching at Half Clock Frequency, 50% Duty Cycle. CI V Input pF OPERATING CHARACTERISTICS, TA = 25ºC (1) Symbol Typ.(1) Parameter Min. VDDQ — 2.7 V 2.3 2.5 2.7 V VDD Supply Voltage VDDQ Output Supply Voltage VREF Reference Voltage (VREF= VDDQ/2) V TT Termination Voltage VI Input Voltage VIH AC High-Level Input Voltage Data Inputs Max. Unit 1.15 1.25 1.35 V VREF– 40mV VREF VREF+ 40mV V 0 — VDD V VREF+ 310mV — — V VIL AC Low-Level Input Voltage Data Inputs — — VREF– 310mV V VIH DC High-Level Input Voltage Data Inputs VREF+ 150mV — — V VIL DC Low-Level Input Voltage Data Inputs — — VREF– 150mV V VIH High-Level Input Voltage RESET 1.7 — — V VIL Low-Level Input Voltage RESET — — 0.7 V VICR Common-Mode Input Range CLK, CLK 0.97 — 1.53 V VI (PP) Peak-to-Peak Input Voltage CLK, CLK 360 — — mV IOH High-Level Output Current — — – 20 mA IOL Low-Level Output Current — — 20 TA Operating Free-Air Temperature 0 — +70 NOTE: 1. The RESET input of the device must be held at VDD or GND to ensure proper device operation. 3 °C IDT74SSTVF16857 14-BIT REGISTERED BUFFER WITH SSTL I/O COMMERCIAL TEMPERATURE RANGE TIMING REQUIREMENTS OVER RECOMMENDED OPERATING FREE-AIR TEMPERATURE RANGE VDD = 2.5V ± 0.2V Symbol Parameter Min. Max. Unit Clock Frequency — 200 MHz tw Pulse Duration, CLK, CLK HIGH or LOW 2.5 — ns tACT Differential Inputs Active Time — 22 ns tINACT Differential Inputs Inactive Time(2) — 22 ns 0.75 — ns 0.9 — ns CLOCK tSU Setup Time, Fast Slew Rate (1) (3, 5) Data Before CLK↑, CLK↓ Setup Time, Slow Slew Rate(4, 5) tN Hold Time, Fast Slew Rate (3,5) Data Before CLK↑, CLK ↓ Hold Time, Slow Slew Rate(2,5) 0.75 — ns 0.9 — ns NOTES: 1. Data inputs must be low a minimum time of tACT max., after RESET is taken HIGH. 2. Data and clock inputs must be held at valid levels (not floating) a minimum time of tINACT max., after RESET is taken LOW. 3. For data signal input slew rate is ≥1V/ns. 4. For data signal input slew rate is ≥0.5V/ns and <1V/ns. 5. CLK, CLK signal input slew rates are ≥1V/ns. SWITCHING CHARACTERISTICS OVER RECOMMENDED FREE-AIR OPERATING RANGE (UNLESS OTHERWISE NOTED) VDD = 2.5V ± 0.2V Symbol fMAX tPD tPHL Parameter Min 200 1.1 — CLK and CLK to Q RESET to Q 4 Max. — 2.8 5 Unit MHz ns ns IDT74SSTVF16857 14-BIT REGISTERED BUFFER WITH SSTL I/O COMMERCIAL TEMPERATURE RANGE TEST CIRCUITS AND WAVEFORMS (VDD = 2.5V ± 0.2V) VTT RL = 50Ω From Output Under Test Test Point CL = 30 pF (see note 1) Load Circuit LVCMOS RESET Input VDD VDD/2 VDD/2 tINACT Timing Input 0V tACT VICR VICR tPLH VI(PP) tPHL VOH IDD (see note 2) 90% 10% Output VTT VOL Voltage and Current Waveforms Inputs Active and Inactive Times Voltage Waveforms - Propagation Delay Times LVCMOS RESET Input Output VICR VTT VIL VOL Voltage Waveforms - Propagation Delay Times Voltage Waveforms - Pulse Duration tSU VIL VOH VIH VREF VREF Timing Input VIH VDD/2 tPHL tW Input VTT VI(PP) tN VIH Input VREF VREF VIL Voltage Waveforms - Setup and Hold Times NOTES: 1. CL includes probe and jig capacitance. 2. IDD tested with clock and data inputs held at VDD or GND, and IO = 0mA. 3. All input pulses are supplied by generators having the following characteristics: PRR ≤10MHz, ZO = 50Ω, input slew rate = 1 V/ns ±20% (unless otherwise specified). 4. The outputs are measured one at a time with one transition per measurement. 5. VTT = VREF = VDDQ/2 6. VIH = VREF + 310mV (AC voltage levels) for differential inputs. VIH = VDD for LVCMOS input. 7. VIL = VREF - 310mV (AC voltage levels) for differential inputs. VIL = GND for LVCMOS input. 8. tPLH and tPHL are the same as tPD. 5 IDT74SSTVF16857 14-BIT REGISTERED BUFFER WITH SSTL I/O COMMERCIAL TEMPERATURE RANGE ORDERING INFORMATION IDT XX SSTV XX Family Temp. Range XXXX XX Device Type Package CORPORATE HEADQUARTERS 2975 Stender Way Santa Clara, CA 95054 PA PAG Thin Shrink Small Outline Package TSSOP - Green 857 14-Bit Registered Buffer with SSTL I/O 16 Double-Density 74 0°C to +70°C for SALES: 800-345-7015 or 408-727-6116 fax: 408-492-8674 www.idt.com 6 for Tech Support: [email protected] (408) 654-6459