LP08 Series SMT High Current Inductors Features Applications • Low Cost Design • High saturation current of 45A • Designed for frequencies up to 1MHz • Suitable for pick and place applications • Voltage Regulator Modules (VRMs) • High Frequency, High Current Switching Power Supplies • Synchronous Buck DC/DC Converters Packaging Reel diameter: 13”, Reel Width: 24 mm, Pieces/Reel: 600 Mechanical Recommended PCB layout ���� 10.92 MAX Schematic S 6.22 MAX 8.0 MAX LP08-XXX YYWW ���� F ���� Top View Side View units: mm Electrical Specifications Part Number Inductance1 DCR Idc5 Isat6 (nH, ±15%) (mΩ, ± 8%) (A) (A) LP08-211 210 0.58 38 45 LP08-271 270 0.58 38 35 LP08-331 330 0.58 38 31 Specifications subject to change without notice. 800.729.2099 tel www.icecomponents.com 1. 2. 3. 4. 5. Tested at 1.0 MHz, 0.1 Vrms. Electrical specifications at 25ºC. Operating range: -40ºC to +130ºC. Meets UL 94V-0. Idc is DC current required to produce a temperature rise of 40ºC. 6. Isat is the DC current required to reduce the nominal inductance by 15%. 15 (02/08) LP08-1