HDTV DELAY LINES 30 MHz Bandwidth This range of video delay lines is designed to delay 30 MHz bandwidth video signals with minimum distortion. This range is fully phase equalised and give excellent time and frequency domain response. They may be cascaded to give a wider range of delay times. Other delay times within the range can be produced to special order. • Fixed or programmable delays • Small size • Excellent pulse characteristics • Low Insertion Loss Delay time (ns) Insertion Loss (dB) Order Code Package 10 < 0.2 DF16B0010 DR00283A 20 < 0.3 DF16B0020 DR00283A 30 < 0.4 DF28B0030 DR00279A 40 < 0.4 DF28B0040 DR00279A 50 < 0.5 DF28B0050 DR00279A 75 < 0.7 DF36B0075 DR00282A 100 < 0.8 DF40B0100 DR00267A 125 < 1.5 DF40B0125 DR00267A 200 < 2.5 DF40B0200 DR00267A 1+2+4+5+8 < 0.4 DP28B0020 DR00278A 1+2+2+5+10+10+20 < 1.5 DP36B0050 DR00281A 2+4+8+16+32 < 0.7 DP28B0062 DR00084B 5+10+20+40 < 1.2 DP40B0075 DR00280A 1+2+4+8+16+32+64 < 2.0 DP48B0127 DR00277A Common Specifications Impedance Tolerance on pulse delay time Amplitude ripple to 30 MHz Group delay ripple to 30 MHz 75 ohms ± 2% or ± 2 ns < 0.2 dB < 5 ns up to 100 ns < 10 ns above 100 ns < 0.5% 0 to 70 0C No Pulse and bar k-rating, 2T30 Temperature range Aqueous Washable © Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice Fara105d.doc Page 1 of 2 Jul-03(C) PACKAGE DETAIL Please contact factory for package details Faraday Technology Ltd. Croft Road Industrial Estate, Newcastle, Staffordshire ST5 0QZ. England. Fara105d.doc Tel: Fax: Email: Web site: Page 2 of 2 + 44 (0)1782 661501 + 44 (0)1782 630101 [email protected] http://www.faradaytech.co.uk Jul-03(C)