Crystal Oscillator NT2016SC Temperature Compensated Crystal Oscillator(TCXO) with two outputs of same frequency and E/D function ■ Main Application Smartphone / Mobile phone, Wireless module, and GPS / GNSS module, etc. ■ Features ● Supports low power supply voltage. (Supports DC +1.7V to +3.3V. Standard specification : +1.8V) ● Ultra-compact and light with a height, cubic volume, and weight of Max. 0.8 mm, 0.0022 cm3, and 0.008 g, respectively. ● A surface-mount crystal oscillator. (Reflow soldering is possible.) ● Lead-free. Meets the requirements for re-flow profiling using lead-free solder. ● With Enable / Disable function (This function can be used for both output1 and 2). ● It is possible to choose the AFC function instead of the Enable/Disable function for output 2. ■ Specifications Model Item NT2016SC Nominal Frequency Range (MHz) 10 to 52 Standard Frequency (MHz) 26 38.4 Supply Voltage [VCC] (V) 52 +1.8 Load Impedance 10 kΩ//10 pF Current Consumption (mA) (Two outputs) Max. 2.0 Max. 2.2 Output Voltage Max. 2.4 Min. 0.8 V(p-p) (DC Coupling *1) Frequency/Temperature Characteristics Max. ±2.0×10–6 (Max. ±0.5×10–6 available) Operating Temperature Range (°C) –30 to +85 Storage Temperature Range (°C) –40 to +85 Frequency/Voltage Coefficient Max. ±0.1×10–6/+1.8 V±5 % Frequency/Load Coefficient Max. ±0.1×10–6/(10 kΩ//10 pF) ±10 % Long-term Frequency Stability Max. ±1.0×10–6/year Specification Number NSA3502B NSA3502C NSA3502D • Frequency setting conditions : Frequencies are set at normal temperatures (+25±2 °C). *1. A DC-cut capacitor is not embedded in this crystal oscillator. Connect a DC-cut capacitor (1,000 pF) to the line-out terminal of the oscillator. ■ Dimensions #6 #5 Terminal land connections #4 1.6±0.1 #1 #2 2.0±0.1 #3 #3 Control Voltage input (Enable/ Enable/Disable or Disable) output2 AFC forfor output2 Output2 (Analog) GND #4 Output1 (Analog) #5 Control Voltage (Enable/ Enable/Disable input for output1 Disable) for output1 #6 VCC #6 #5 0.5 #4 0.4±0.1 (0.5) (0.6) (1.2) (0.6) (0.45) #3 0.6±0.1 #2 0.4±0.05 1.2±0.05 #1 (0.8) (0.4) (0.8) 0.7±0.1 #1 #2 mm 1803D_NT2016SC_e