DTS03K16 www.din-tek.jp N-Channel 16V (D−S) MOSFET FEATURES PRODUCT SUMMARY V(BR)DSS Min (V) 16 D TrenchFETr Power MOSFET ID (A) rDS(on) DS( ) Max (W) VGS(th) (V) 1.0 @ VGS = 10 V DTS03K16 DTS03K16A 1 0 to 3 1.0 3.0 0 1.4 @ VGS = 4.5 V 0.42 0.64 0.35 0.53 APPLICATIONS D Direct Logic-Level Interface: TTL/CMOS D Drivers: Relays, Solenoids, Lamps, Hammers, Displays, Memories, Transistors, etc. D Battery Operated Systems D Solid-State Relays TO-236 (SOT-23) G D 1 3 S D G 2 S Top View N-Channel MOSFET ABSOLUTE MAXIMUM RATINGS (TA = 25_C UNLESS OTHERWISE NOTED) Limit Parameter Symbol DTS03K16 DTS03K16A Drain-Source Voltage VDS 16 Gate-Source Voltage VGS "8 Continuous Drain Current (TJ = 150_C) TA= 25_C TA= 70_C Pulsed Drain Currenta Power Dissipation Thermal Resistance, Junction-to-Ambient Operating Junction and Storage Temperature Range ID IDM TA= 25_C TA= 70_C PD RthJA TJ, Tstg V 0.42 0.64 0.33 0.51 0.8 1.5 0.35 0.8 0.22 0.51 357 156 −55 to 150 Unit A W _C/W _C Notes a. Pulse width limited by maximum junction temperature. 1 DTS03K16 www.din-tek.jp SPECIFICATIONS (TA = 25_C UNLESS OTHERWISE NOTED) Limits Parameter Symbol Test Conditions Min Typ Max V(BR)DSS VGS = 0 V, ID = 10 mA 16 VGS(th) VDS = VGS, ID = 0.25 mA 1.0 2.0 3.0 Gate-Body Leakage IGSS VDS = 0 V, VGS = "20 V "100 Zero Gate Voltage Drain Current IDSS VDS = 16 V, VGS = 0 V 1 VDS = 16 V, VGS = 0 V, TJ = 55_C 10 On State Drain Currenta On-State ID(on) D( ) Unit Static Drain-Source Breakdown Voltage Gate-Threshold Voltage Drain-Source On-Resistancea VDS = 10 V V, VGS = 8 10VV Diode Forward Voltage 0.5 DTS03K16A 0.8 nA mA A VGS = 4.5 V, ID = 0.1 A 0.8 1.4 VGS = 10 V, ID = 0.3 A 0.47 1.0 gfs VDS = 10 V, ID = 0.3 A 550 VSD IS = 0.3 A, VGS = 0 V 0.85 1.2 1000 1500 rDS(on) Forward Transconductancea DTS03K16 V W mS V Dynamicb Total Gate Charge Qg Gate-Source Charge Qgs Gate-Drain Charge Qgd 200 Gate Resistance Rg 48 VDS = 16 V, VGS = 10 V ID ^ 0.3 A 205 td(on) Turn On Time Turn-On VDD = 15 V, RL = 50 W ID ^ 0 0.3 3A A, VGEN = 10 V RG = 6 W tr td(off) Turn-Off Time tf pC W 4.5 8 8 15 9 15 6.3 12 ns Notes a. Pulse test: PW v300 ms duty cycle v2%. b. Guaranteed by design, not subject to production testing. TYPICAL CHARACTERISTICS (25_C UNLESS NOTED) Output Characteristics Transfer Characteristics 1.0 0.8 VGS = 10 thru 5 V 0.7 4V 0.8 I D − Drain Current (A) I D − Drain Current (A) 0.6 0.5 0.4 0.3 0.2 3V 0.6 0.4 TJ = 125_C 0.2 0.1 0.0 0.0 25_C 2V 0.4 0.8 1.2 1.6 VDS − Drain-to-Source Voltage (V) 2 −55_C 0.0 2.0 0 1 2 3 4 VGS − Gate-to-Source Voltage (V) 5 DTS03K16 www.din-tek.jp TYPICAL CHARACTERISTICS (25_C UNLESS NOTED) Capacitance 50 1.2 40 C − Capacitance (pF) r DS(on) − On-Resistance ( W ) On-Resistance vs. Drain Current 1.5 VGS = 4.5 V 0.9 VGS = 8 V 0.6 0.3 0.0 0.0 Ciss 30 Coss 20 Crss 10 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0 0.8 4 ID − Drain Current (A) Gate Charge On-Resistance vs. Junction Temperature VDS = 16 V ID = 0.3 A r DS(on) − On-Resistance ( W) (Normalized) V GS − Gate-to-Source Voltage (V) 20 1.6 8 6 4 2 VGS = 8 V ID = 0.3 A 1.4 1.2 VGS = 4.5 V ID = 0.1 A 1.0 0.8 0 0.0 0.2 0.4 0.8 0.6 0.6 −50 1.0 −25 0 Qg − Total Gate Charge (nC) 25 50 75 100 125 150 TJ − Junction Temperature (_C) Source-Drain Diode Forward Voltage On-Resistance vs. Gate-to-Source Voltage 2.4 3 1 TJ = 150_C r DS(on) − On-Resistance ( W ) I S − Source Current (A) 16 12 VDS − Drain-to-Source Voltage (V) 10 0.1 0.01 0.001 0.0 8 TJ = 25_C 2.0 1.6 ID = 0.3 A 1.2 0.8 0.4 0.0 0.2 0.4 0.6 0.8 1.0 VSD − Source-to-Drain Voltage (V) 1.2 1.4 0 4 8 12 14 16 VGS − Gate-to-Source Voltage (V) 3 DTS03K16 www.din-tek.jp TYPICAL CHARACTERISTICS (25_C UNLESS NOTED) Threshold Voltage 0.4 V GS(th) Variance (V) 0.2 ID = 250 mA −0.0 −0.2 −0.4 −0.6 −50 −25 0 25 50 75 100 125 150 TJ − Temperature (_C) Safe Operating Area (TO-236, DTS03K16 Only) Safe Operating Area (TO-226AA, DTS03K16A Only) 10 10 IDM Limited rDS(on) Limited rDS(on) Limited 10 ms 0.1 ID(on) Limited 100 ms 1s 10 s dc TA = 25_C Single Pulse 0.01 BVDSS Limited 0.001 0.1 1 1 ms 1 1 ms I D − Drain Current (A) I D − Drain Current (A) 1 IDM Limited 0.1 0.01 10 ms ID(on) Limited 10 100 1s dc TA = 25_C Single Pulse BVDSS Limited 0.001 0.1 VDS − Drain-to-Source Voltage (V) 100 ms 10 s 1 10 100 VDS − Drain-to-Source Voltage (V) Normalized Thermal Transient Impedance, Junction-to-Ambient (TO-236, DTS03K16 Only) Normalized Effective Transient Thermal Impedance 2 1 Duty Cycle = 0.5 0.2 0.1 0.1 0.05 0.02 Single Pulse 0.01 10−4 4 10−3 10−2 10−1 1 Square Wave Pulse Duration (sec) 10 100 600 DTS03K16 www.din-tek.jp TYPICAL CHARACTERISTICS (25_C UNLESS NOTED) Normalized Thermal Transient Impedance, Junction-to-Ambient (TO-226AA, DTS03K16A Only) Normalized Effective Transient Thermal Impedance 2 1 Duty Cycle = 0.5 0.2 0.1 0.1 0.05 0.02 Single Pulse 0.01 10−4 10−3 10−2 10−1 1 Square Wave Pulse Duration (sec) 10 100 600 5 Package Information www.din-tek.jp SOT-23 (TO-236): 3-LEAD b 3 E1 1 E 2 e S e1 D 0.10 mm C 0.004" A2 A C q Gauge Plane Seating Plane Seating Plane C A1 Dim 0.25 mm L L1 MILLIMETERS INCHES Min Max Min Max A 0.89 1.12 0.035 0.044 A1 0.01 0.10 0.0004 0.004 A2 0.88 1.02 0.0346 0.040 b 0.35 0.50 0.014 0.020 c 0.085 0.18 0.003 0.007 D 2.80 3.04 0.110 0.120 E 2.10 2.64 0.083 0.104 E1 1.20 1.40 0.047 e e1 L 1.90 BSC 0.40 L1 q 0.0748 Ref 0.60 0.016 0.64 Ref S 0.024 0.025 Ref 0.50 Ref 3° 0.055 0.0374 Ref 0.95 BSC 0.020 Ref 8° 3° 8° ECN: S-03946-Rev. K, 09-Jul-01 DWG: 5479 1 Application Note www.din-tek.jp 0.049 (1.245) 0.029 0.022 (0.559) (0.724) 0.037 (0.950) (2.692) 0.106 RECOMMENDED MINIMUM PADS FOR SOT-23 0.053 (1.341) 0.097 (2.459) Recommended Minimum Pads Dimensions in Inches/(mm) Return to Index Return to Index APPLICATION NOTE 1 Legal Disclaimer Notice Disclaimer www.din-tek.jp ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Din-Tek Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Din-Tek”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Din-Tek makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Din-Tek disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Din-Tek’s knowledge of typical requirements that are often placed on Din-Tek products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Din-Tek’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Din-Tek products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Din-Tek product could result in personal injury or death. Customers using or selling Din-Tek products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Din-Tek personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Din-Tek. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Din-Tek Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Din-Tek documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Din-Tek Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Din-Tek documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. 1