GBPC2500~2512 Description GBPC Mechanical Data Features ¬ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ¬ High surge current capability ¬ Ideal for printed circuit boards ¬ Case: Molded plastic body over passivated junctions ¬ Terminals: Solderable per MIL-STD-202, method 208 ¬ Polarity: As marked on body ¬ Mounting position: Any ¬ Weight: 0.63 ounce, 18 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. GBPC GBPC GBPC GBPC GBPC GBPC GBPC SYMBOL GBPC 2500 2504 2506 2508 2510 2512 UNIT 2501 2502 Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 1200 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 840 V VDC 50 100 200 400 600 800 1000 1200 V Maximum DC Blocking Voltage Maximum Average Forward Rectified o Current TC=70 C I(AV) 25.0 A IFSM 300 A VF 1.1 V Peak Forward Surge Current, 8.3ms single Half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage @ 12.5 A o Maximum DC Reverse Current @TJ=25 C o At Rated DC Blocking Voltage @TJ=125 C IR 2 5.0 uA 500 2 Rating for fusing (t < 8.3ms) It 374 AS Typical junction Capacitance (Note 1) CJ 130 pF Typical Thermal Resistance (Note 2) R JC 1.3 TJ, TSTG -55 to + 150 Operating Junctionand Storage Temperature Range NOTES : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC. (2) Thermal Resistance form junction to case mounted on P.C.B with 0.5 x 0.5"(13x13mm) copper pads. o C/W o C FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.1 - FORWARD CURRENT DERATING CURVE 300 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 25 20 15 10 5 60 Hz Resistive or Inductive load Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) 250 200 150 100 50 0 0 0 50 100 150 1 100 NUMBER OF CYCLES AT 60Hz o CASE TEMPERATURE, C FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 100 1.0 0.1 o TJ=25 C PULSE WIDTH=300uS 1% DUTY CYCLE 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 o TJ=125 C 10 1 0.1 o TJ=25 C 0.01 1.6 0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.5 - TYPICAL JUNCTION CAPACITANCE o TJ = 25 C f = 1.0 MHZ Vsig = 50mVp-p 100 10 0.1 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,% 1000 JUNCTION CAPACITANCE, pF IINSTANTANEOUS FORWARD CURRENT, AMPERES 10 1.0 4.0 10 REVERSE VOLTAGE, VOLTS 100 GBPC2500~2512 Ratings at 25 Deg. C ambient temperature unless otherwise specified. Single Phase Half Wave, 60 HZ Resistive or Inductive Load. For Capacitive Load, Derate Current by 20%. NOTES: 1. Corrosion-Resistant Terminals Designed for .250" Female Quick Connect Wrap Around or Solder. 2. A Thin Film of Silicone Thermal Compound is Recommended Between Bridge and Mounting Surface for Improved Thermal Conduction. 3. These FCI Bridges Are Also Available in Fast Recovery, In Positive and Negative Center Tap and in Double Configurations. Consult with FCI for Your Special Requirements. GBPC2500~2512 Case - Metal or Molded Plastic AC In Terminals - Plated .25" Faston or Plated Copper Wire Leads .040" Diameter Weight - 0.706 Ounces, 20 Grams DC Out Mounting Position - Any with Bolt Down with Silicone Thermal Compound Between Bridge and Mounting Surface for Optimum Heat Transfer Mounting Torque - 20 Inch Pound Max Ordering Information FCI'S GBPC Series of Bridge Can be Ordered with Options on Terminals and case Materials How To Specify Case Material and Terminal Options: n For Metal Case, Order Suffix (1) M n For Plastic Case, Order Suffix (1) P n For Faston Terminals, Order Suffix (2) F n For Wire Lead Terminals, Order Suffix (2) W GBPC Series Examples To Order a 25 Amp, 400 Volt Bridge with Faston Leads and a Plastic Case: Specify GBPC 2504PF-----Where" P " =Plastic and " F " =Faston Terminals To Order a 35 Amp, 800 Volt Bridge with Wire Leads and a Metal Case: Specify GBPC 3508MW-----Where" M " =Metal and " W " =Wire Lead Terminals To Order a 15 Amp, 200 Volt, UL Recognized Bridge with Wire Leads and a Plastic Case: Specify GBPC 1502PWU-----Where" P " =Plastic and " W " =ire Lead Terminals and " U "= UL Recognized NOTE: Fast Recovery Bridges (Diodes) Are Available; Please Contact FCI Components. GBPC " S " Series Examples To Order Bridges with the In-Line Pin Configuration, Select the Current and Voltage Desired and Add S as the Suffix, as shown in the following example. To Order a 35 Amp, 800 Volt Bridge with In-Line Wire Leads: Specify GBPC 3508S-----Where" S " = In line Wire Lead Terminals