BXB150 Series Single output DC/DC CONVERTERS • • • • • • • • • 100-150W Wide Input DC/DC Converters 1 Industry standard footprint MTBF >1.4 million hours (Bellcore 332) Input voltage to ETS300-132-2 Adjustable output voltage No minimum load required Separate case ground pin 2:1 input range for battery powered applications Undervoltage lockout (UVLO) UL, VDE and CSA safety approvals The BXB150 Series are high power density DC/DC converters packaged in the industry standard footprint (2.40 x 2.28 x 0.50 inches) to give designers optimum choices when specifying for both new and replacement designs. Suitable for a wide range of applications in nearly any industry, the BXB150 was particularly designed with communication and distributed power applications in mind. Using Bellcore 332, the MTBF is greater than 1,400,000 hours. Aluminum baseplate technology with four threaded M3 inserts makes heatsink attachment and optimum thermal management easy. The BXB150 series is approved to IEC950 by UL, CSA and VDE. 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at nominal input, full load at 25°C unless otherwise stated OUTPUT SPECIFICATIONS INPUT SPECIFICATIONS (continued) Voltage adjustability 60% to 110% Set point accuracy Low line to high line ±0.05% Load regulation Full load to min. load ±0.10% Minimum load 0% At turn-on and turn-off Undershoot Ripple and noise (5Hz to 20MHz) (See Note 1) 24Vin: 24Vin: 48Vin: 48Vin: Start-up time (See Note 8) Power up Remote ON/OFF ±1.0% Line regulation Overshoot Undervoltage lockout None None 3.3V and 5V 75mV pk-pk, 20mV rms 100mV pk-pk, 30mV rms 12V and 15V Temperature coefficient ±0.01%/°C Transient response (See Note 2) ±2.0% max. deviation 170µs recovery to within ±1.0% Remote sense 0.5VDC transmission line drop compensation power power power power up down up down Conducted emissions (See Note 3) Bellcore 1089 FCC part 15 EN55022, CISPR22 Efficiency See table Isolation voltage Input/case Input/output Output/case Switching frequency Fixed Approvals and standards (See Note 5) Material flammability Input current No load Remote OFF 130mA max. 20mA max. MTBF Input current (max.) (See Note 4) 24Vin Input reflected ripple (See Note 6) Active low remote ON/OFF Logic compatibility ON OFF VDE0805, EN60950, IEC950 UL1950, CSA C22.2 No. 950 Aluminum baseplate with plastic case UL94V-0 Weight 110g (3.88oz) Bellcore 332 MIL-HDBK-217F @ 40°C, 100% FL 1,400,000 hours 580,000 hours min. ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating case temp. -40°C to +100°C Non-operating -55°C to +125°C Altitude Operating Non-operating Vibration 5Hz to 500Hz 5mA pk-pk (See Note 7) Open collector ref to -input 1.2VDC max. Open circuit 1500VDC 1500VDC 1500VDC 500kHz typ. Case material 18 to 36VDC 36 to 75VDC 48Vin Level A Level A Level A GENERAL SPECIFICATIONS 24Vin nominal 48Vin nominal 9.0A max. @ Io max. and Vin = 0 to 75V 6.5A max. @ Io max. and Vin = 0 to 75V 20ms 20ms EMC CHARACTERISTICS INPUT SPECIFICATIONS Input voltage range 17V 16.3V 34V 32.5V 10,000 feet max. 40,000 feet max. 2.4G rms (approx.) File Name: BXB150.PDF Rev: 01 Jan 2000 BXB150 Series Single output DC/DC CONVERTERS 100-150W Wide Input DC/DC Converters 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT POWER (MAX.) INPUT VOLTAGE OVP OUTPUT VOLTAGE OUTPUT CURRENT (MIN.) OUTPUT CURRENT (MAX.) EFFICIENCY (TYP.) LINE LOAD MODEL NUMBER (7) 100W 18-36VDC 4.3VDC 3.3V 0A 30A 77% ±0.05% ±0.1% BXB150-24S3V3FLT 100W 150W 36-75VDC 4.3VDC 3.3V 0A 30A 79% ±0.05% ±0.1% BXB150-48S3V3FLT 36-75VDC 6.5VDC 5V 0A 30A 84% ±0.05% ±0.1% BXB150-48S05FLT 150W 36-75VDC 14.5VDC 12V 0A 12.5A 84% ±0.05% ±0.1% BXB150-48S12FLT 150W 36-75VDC 17.5VDC 15V 0A 10A 88% ±0.05% ±0.1% BXB150-48S15FLT Notes 4 5 6 7 8 Continuous, automatic recovery Overvoltage protection Non-latching Undervoltage protection Non-latching Thermal protection 110°C baseplate, automatic recovery TELECOM SPECIFICATION Central office interface A ETS300-132-2 EXTERNAL OUTPUT TRIMMING 8 Output can be externally trimmed by using the method shown. International Safety Standard Approvals TRIM UP RT1 OR RT2 7 VDE0805/EN60950/IEC950 File No. 10401-3336-1095 UL1950 File No. E136005 TRIM DOWN CSA C22.2 No. 950 File No. LR41062C 6 PIN CONNECTIONS 1 + Vin 2 Remote ON/OFF 1.90 (48.26) 1.000 (25.40) 4 - Vin 5 - Vout 6 - Sense 7 Trim 8 + Sense 9 + Vout 1.400 (35.56) VI(+) Case ON/OFF 0.400 (10.16) 3 0.200 (5.08) Min. Length for all Input and Output Pins 0.190 (4.83) ± 0.010 (0.25) 0.500 (12.69) ± 0.010 (0.25) VI (-) FUNCTION VIEW SHOWN PIN SIDE UP CASE PIN NUMBER Vo (-) 3 Short circuit protection +SEN TRIM -SEN 2 PROTECTION Measured with 10µF tantalum capacitor and 1µF ceramic capacitor across output. di/dt = 0.1A/1µs, Vin = 48VDC, Tc = 25°C, load change = 0.5 lo max. to 0.75 lo max. and 0.75 lo max. to 0.5 lo max. Units should be characterised within systems. External components required. Input fusing is recommended based on surge current and maximum input current. This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. Simulated source impedance of 12µH. 12µH inductor in series with +Vin. Active high remote on/off option is available (standard product is active low), designate with the suffix ‘FHT’ e.g. BXB150-48S05FHT. Consult factory for further details and options. Start-up into resistive load. 0.700 (17.77) 0.400 (10.16) 1.000 (25.40) 2.000 (50.80) 2.40 (60.96) Max. 1.400 (35.56) Vo(+) 1 REGULATION 7 x Ø.040 (1.02) ±0.002 (0.05) 0.190 (4.83) ±0.010 (0.25) 2.28 (57.91) Max. 2 x Ø.080 (2.03) ± 0.002 (0.05) 0.500 (12.70) 4 x M3 x 0.5 Through ALL DIMENSIONS IN INCHES (mm) Tolerance : x.xx ±0.02in. (0.51mm) x.xxx ±0.010in. (0.254mm) Data Sheet © Artesyn Technologies® 2002 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. www.artesyn.com File Name: BXB150.PDF Rev: 01 Jan 2000