1 2 3 4 5 6 7 SYMBOL 8 REVISION DATE A A B B 82.5 18.08 165 156.7 180.1 173 7.08 C 97 82.1 71 104 86.85 52 CN1 800(RGB)X480 CN2 C CN4 CN3 4.5 0.5 3.5 0.1 E 4- D [read caution below] 2 0.2 D NOTES: 1. 7.0” Sunlight Readable HDMI TFT Module w/ USB-HID Capacitive Touch 2. On-board Texas Instruments TFP401A HDMI/DVI Receiver 3. Optimal Viewing Direction: 12:00 4. Display Mode: Transmissive / Normally White / Anti-Glare 5. Luminance: 830 cd/m² 6. 3M Brightness Enhancement Film 7. Touch Panel: Capacitive 8. On-board Texas Instruments TPS61165 High Brightness LED Driver w/ PWM E STANDARD TOLERANCES (UNLESS OTHERWISE SPECIFIED) LINEAR: ± 0.3mm - DIMENSIONS ARE IN MILLIMETERS Improper handling of the FPC connections at the bottom edge of this module may cause damage resulting in display or touch failure. Take special care when handling this area of the display module to make sure these connections are never strained nor creased. 1 2 3 1.1 NHD-7.0-HDMI-N-RSXN-CTU UNLESS OTHERWISE SPECIFIED F REVISION: DRAWING/PART NUMBER: 4 5 DRAWN BY: DRAWN DATE: P. Bartek 8/25/17 - THIRD ANGLE PROJECTION 6 CHECKED BY: N. Patel CHECKED DATE: 8/28/17 DO NOT SCALE DRAWING SIZE: A3 APPROVED BY: M. LaVine SCALE: APPROVED DATE: 8/29/17 1:2 SHEET 1 OF 1 THIS DRAWING IS SOLELY THE PROPERTY OF NEWHAVEN DISPLAY INTERNATIONAL, INC. THE INFORMATION IT CONTAINS IS NOT TO BE DISCLOSED, REPRODUCED OR COPIED IN WHOLE OR PART WITHOUT WRITTEN APPROVAL FROM NE WHAVEN DISPLAY. 7 8 F