LINEAR ARRAY MULTIANODE PMT AND ASSEMBLY R5900U-L16 SERIES, H7260 SERIES Multianode 16 Channel Linear Array (R5900U-L16: PMT) Multianode 32 Channel Linear Array (H7260: PMT ASSEMBLY) FEATURES ● High Cathode Sensitivity Luminous 250 µA/lm Typ. (-01 Type) Luminous 500 µA/lm Typ. (-20 Type) ● Anode Structure 1 mm Channel Pitch R5900U-L16 Series..... 0.8 mm × 16 Anodes H7260 Series............... 0.8 mm × 32 Anodes ● High Speed Response: Rise Time 0.6 ns Typ. APPLICATIONS ● Biomedical Fluorescence Detection ● Laser Scanning Detection ● Spectroscopy ● Environmental Monitoring LEFT: R5900U-L16 SERIES RIGHT: H7260 SERIES Figure 1: Typical Spectral Response -00 and -03 Types -01, -04 and -20 Types TPMHB0700EA TPMHB0701EA 100 QUANTUM EFFICIENCY CATHODE RADIANT SENSITIVITY 10 1 H7260K R5900U-00-L16 -03 TYPE 0.1 0.01 100 200 300 400 500 600 700 800 900 1000 WAVELENGTH (nm) CATHODE RADIANT SENSITIVITY (mA/W) QUANTUM EFFICIENCY (%) CATHODE RADIANT SENSITIVITY (mA/W) QUANTUM EFFICIENCY (%) 100 -20 TYPE 10 CATHODE RADIANT SENSITIVITY 1 QUANTUM EFFICIENCY -01 TYPE -04 TYPE 0.1 0.01 100 200 300 400 500 600 700 800 900 1000 WAVELENGTH (nm) Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2003 Hamamatsu Photonics K.K. LINEAR ARRAY MULTIANODE PMT AND ASSEMBLY R5900U-L16 SERIES, H7260 SERIES SPECIFICATIONS A Type No. Anode Type Outline No. Effective Area per Channel Channel Pitch (mm) (mm) Dynode Structure / No. of Stages B Insulation Cover Material Weight (g) R5900U-L16 SERIES 16 Channel Linear Array 1 (See Fig.8) 0.8 × 16 1 MC/10 35 P.O.M. H7260 SERIES 2 (See Fig.13) 0.8 × 7 1 MC/10 62 P.O.M. 32 Channel Linear Array Notes: A MC: Metal Channel B P.O.M: polyoxymethylene G Spectral Response H Cathode Characteristics Luminous Type No. Range Photocathode Peak Material Wavelength Window Material Blue Sens. Index (CS 5-58) Typ. Red /White Ratio (R-68) Typ. I Radiant Supply Voltage Typ. (mA/W) (V dc) Min. (µA/lm) Typ. (µA/lm) B 50 70 8.5 — 72 -800 J MA B 150 250 — 0.3 65 -800 J 420 BA U 50 70 8.5 — 72 -800 J 185 to 880 420 MA U 150 250 — 0.3 65 -800 J R5900U-20-L16 300 to 920 630 MA B 350 500 — 0.45 78 -800 J H7260K 300 to 650 420 BA B 50 70 8.5 — 72 -800 H7260-01 300 to 880 420 MA B 150 250 — 0.3 65 -800 H7260-03 185 to 650 420 BA U 50 70 8.5 — 72 -800 H7260-04 185 to 880 420 MA U 150 250 — 0.3 65 -800 H7260-20 300 to 920 630 MA B 350 500 — 0.45 78 -800 (nm) (nm) R5900U-00-L16 300 to 650 420 BA R5900U-01-L16 300 to 880 420 R5900U-03-L16 185 to 650 R5900U-04-L16 Notes: G BA: Bialkali MA: Multialkali H B: Borosilicate glass U: UV glass I Measured at the peak wavelength (at 25 °C) C Socket / Socket Assembly Supply Voltage (V dc) Maximum Ratings D E E Average Total Anode Average Current Anode per Current Channel (µA) (µA) Voltage Divider Current Type No. (mA) E678-32B / E6736 -900 100 10 — SD-108-T-22* / — -900 100 6 0.37 F R5900U-L16 SERIES H7260 SERIES Notes: C *: Supplied No mark: Sold separately D The maximum ambient temperature range R5900U-L16 SERIES: -30 °C to +50 °C R7260 SERIES: 0 °C to +50 °C E Averaged over any interval of 30 seconds maximum. F Measured with the maximum supply voltage. (at 25 °C) Anode Characteristics K Dark Current per Channel (After 30 min.) Luminous Gain Min. (A/lm) Typ. (A/lm) Typ. 50 280 75 Pulse Linearity per Cross-talk Rise Time Transit Time Channel Spread (±2 % (FWHM) Typ. deviation) (mA) (%) (ns) (ns) Time Response Typ. (nA) Max. (nA) 4 × 106 0.2 2 0.6 0.18 0.8 250 6 1 × 10 0.5 5 0.6 0.18 50 280 4 × 106 0.2 2 0.6 75 250 1 × 106 0.5 5 175 500 1 × 106 1 50 140 6 2 × 10 75 250 50 75 175 Uniformity Between Each Anode Type No. Typ. Max. 3 1: 1.5 1: 2 R5900U-00-L16 0.8 3 1: 1.7 1: 2.5 R5900U-01-L16 0.18 0.8 3 1: 1.5 1: 2 R5900U-03-L16 0.6 0.18 0.8 3 1: 1.7 1: 2.5 R5900U-04-L16 10 0.6 0.18 0.8 3 1: 1.7 1: 2.5 R5900U-20-L16 0.2 2 0.6 0.18 0.6 3 1: 1.5 1: 2 1 × 106 0.5 5 0.6 0.18 0.6 3 1: 1.7 1: 2.5 H7260-01 140 2 × 106 0.2 2 0.6 0.18 0.6 3 1: 1.5 1: 2 H7260-03 250 1 × 106 0.5 5 0.6 0.18 0.6 3 1: 1.7 1: 2.5 H7260-04 500 1 × 10 1 10 0.6 0.18 0.6 3 1: 1.7 1: 2.5 H7260-20 6 Notes: J Refer to the "voltage distribution ratio and voltage" shown below P Electrodes K Dy1 Dy2 • • • Dy10 Distribution 1 • • • 1 1 1 Supply Voltage: 800 V, K: Cathode, Dy: Dynode, P: Anode K Anode characteristics are measured with the supply voltage and voltage distribution ratio specified by note J H7260K LINEAR ARRAY MULTIANODE PMT AND ASSEMBLY R5900U-L16 SERIES, H7260 SERIES R5900U-L16 SERIES Figure 3: Typical Gain Characteristics Figure 2: Cross-Section 108 FACE PLATE FOCUS MESH TPMHB0703EA 1.5 PHOTOCATHODE R5900U-00-L16 / -03-L16 107 Dy1 Dy2 GAIN 106 ANODE 105 HOUSING (P.O.M.) R5900U-01-L16 / -04-L16 / -20-L16 104 TPMHC0224EA 103 500 600 700 800 900 1000 SUPPLY VOLTAGE (V) Figure 4: Anode Uniformity (Example) TPMHB0704EA SPATIAL RESOLUTION AND CROSS-TALK SCAN OUTPUT DEVIATION (%) OUTPUT DEVIATION (%) 100 Figure 5: Cross-Talk (Example) 80 60 40 SCAN POSITION 100 80 DEAD SPACE EFFECTIVE SPACE 60 (TOP VIEW) B A 20 0 16 CH 1 CH SIGNAL 40 1 2 3 4 5 6 7 SUPPLY VOL.: -800 V LIGHT SOURCE: TUNGSTEN LAMP SPOT DIA.: 100 µm SCAN PITCH: 50 µm POSITION (channel) 20 0 1 3 5 7 9 CHANNEL 11 13 15 CH 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 CROSS-TALK RATIO (%) 9 10 11 8 7 6 5 4 3 2 1 100 2.9 0.6 0.2 0.1 — — — — — — 2.9 100 3.1 0.5 0.2 0.1 — — — — — 0.8 2.8 100 2.8 0.6 0.2 0.1 — — — — 0.3 0.8 2.7 100 3.2 0.6 0.2 0.1 — — — 0.1 0.3 0.8 2.9 100 3.1 0.6 0.2 0.1 — — — 0.1 0.3 0.8 2.7 100 3.0 0.6 0.2 0.1 — — — 0.1 0.3 0.8 2.7 100 3.0 0.6 0.2 0.1 — — — 0.1 0.3 0.8 2.9 100 2.9 0.6 0.2 — — — — 0.1 0.3 0.8 2.9 100 2.9 0.6 — — — — — 0.1 0.3 0.8 3.1 100 2.7 — — — — — — 0.1 0.4 0.8 3.3 100 — — — — — 0.1 0.4 0.9 3.2 — — CROSS-TALK — — — 0.1 0.4 0.8 — A—× 100 — B—/ AREA — AREA — — — — — — — — — 0.1 0.4 — — — — — — — — — — 0.1 — — — — — — — — — — — 12 — — — — — — — 0.1 0.2 0.6 3.8 100 3.1 0.8 0.4 0.1 13 — — — — — — — — 0.1 0.2 0.6 2.8 100 3.1 0.9 0.4 14 — — — — — — — — — 0.1 0.2 0.6 2.8 100 3.2 0.9 15 — — — — — — — — — — 0.1 0.2 0.6 2.7 100 3.1 16 — — — — — — — — — — — 0.1 0.3 0.6 2.9 100 TPMHB0705EA Figure 6: Typical Time Response Figure 7: Typical Transit Time Spread Characteristics TPMHB0320EB 101 TPMHB0321EC SUPPLY VOLTAGE = -800 (V) = 180 (ps) FWHM = 335 (ps) FWTM = 0.8 mm × 16 mm LIGHT AREA 5 (mV/div.) RELATIVE COUNTS 100 SUPPLY VOLTAGE RISE TIME FALL TIME RL LIGHT AREA = -800 (V) = 593 (ps) = 1691 (ps) = 50 (Ω) = 0.8 mm × 16 mm 10-1 10-2 10-3 10-4 2 (ns/div.) 0.5 (ns/div.) Light is irradiated to only one channel at this measurement. Light is irradiated to only one channel at this measurement. Figure 8: Dimensional Outline and Basing Diagram (Unit: mm) 30.0 ± 0.5 4.4 ± 0.7 2.54 PITCH 1 MAX. K Dy6P13 P11 P9 P7 P5 Dy7 20.32 Dy2 12 EFFECTIVE AREA 24 MAX. 25.7 ± 0.5 15.8 Dy4 NC P15 P16 4 MAX. 30- 0.45 P14 Dy10 Dy9 1 2 3 4 5 6 7 8 9 10 32 31 11 30 12 29 13 GUIDE 28 14 CORNER 27 15 26 16 25 24 23 22 21 20 19 18 17 16 Side View P1 P2 NC Dy3 Dy1 PHOTOCATHODE INSULATION COVER P3 Dy8 P12 P10 P8 P6 P4 Dy5 K Bottom View Basing Diagram 1.0 PITCH 0.8 15.8 Top View K : Photocathode Dy : Dynode (Dy1-Dy10) P : Anode (P1-P16) NC : No Connection TPMHA0298EE LINEAR ARRAY MULTIANODE PMT AND ASSEMBLY R5900U-L16 SERIES, H7260 SERIES H7260 SERIES Figure 9: Cross-Section Figure 10: Typical Gain Characteristics 108 FACE PLATE FOCUS MESH TPMHB0706EA 1.5 PHOTOCATHODE 107 Dy1 H7260K / H7260-03 SOFT TAPE Dy2 ANODE HOUSING (P.O.M.) GAIN 106 105 VOLTAGE DIVIDER CIRCUIT H7260-01 / H7260-04 / H7260-20 104 TPMHC0225EA 103 500 600 700 800 900 1000 SUPPLY VOLTAGE (V) Figure 11: Anode Uniformity (Example) 100 Figure 12: Socket SOCKET: SD-108-T-22 TPMHB0707EA Supplied 5.08 2.54 80 60 2.54 TYP 40 0.76 × 2pcs 20 1.83 2.54 0 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 CHANNEL 7.62 1.32 3.18 OUTPUT DEVIATION (%) 20.32 0.51 TACCA0204EA 1 0.8 Figure 13: Dimensional Outline and Circuit Diagram of H7260 (Unit: mm) 7.62 5.08 2.54 35.0 ± 0.5 0.8 Typ. DY OUT A31-ANODE - A1 GND DY10 OUTPUT PIN ( 0.5) ANODE #31 3.3 A32-ANODE - A2 -HV -HV INPUT TERMINAL ( 0.5) ANODE #1 1.27 ANODE #32 7 GND TERMINAL PIN ( 0.5) 2.54 × 15 = 38.1 ANODE #1 31.8 ANODE #2 ANODE #1 to #32 OUTPUT ( 0.46) (16PIN × 2 LINE 2.54 PITCH) ANODE #32 7.5 24.0 ± 0.5 TPMHA0455EC K G P1 ANODE1 OUTPUT P2 ANODE2 OUTPUT P31 ANODE31 OUTPUT P32 ANODE32 OUTPUT DY1 DY2 DY3 DY4 DY5 DY6 DY7 DY8 DY9 DY10 C4 C1 C2 R8 C3 8 × 2 LINES 2.54 PITCH DY10 OUTPUT R10 R9 ACTIVE BASE CIRCUIT R1 R2 R3 R4 R5 R6 R7 SHIELD SHIELD GND TERMINAL R1 to R7: 220kΩ R8 : 51Ω R9 : 1MΩ -HV INPUT TERMINAL R10: 10kΩ C1 to C4: 0.01µF VOLTAGE DIVIDER CURRENT = 0.37 mA at -900 V (MAX. RATING) INPUT TPMHC0192EA H7260A -HV input cable type is available 7.62 2.8 MAX. 5.08 2.54 GND TERMINAL PIN ( 0.5) ANODE #1 DY10 OUTPUT PIN ( 0.5) 3.3 0.8 Typ. 35.0 ± 0.5 ANODE #31 7.5 A32-ANODE - A2 -HV 10 5 -HV INPUT (RG-174/U RED) DY OUT A31-ANODE - A1 GND 2.54 × 15 = 38.1 2.54 HOUSING (POM) 1.27 52.0 ± 0.5 2.54 HOUSING (POM) ANODE #2 ANODE #1 to #32 OUTPUT ( 0.46) (16PIN × 2 LINE 2.54 PITCH) ANODE #32 450 ± 10 TPMHA0456EC LINEAR ARRAY MULTIANODE PMT AND ASSEMBLY R5900U-L16 SERIES, H7260 SERIES [ACCESSORIES FOR R5900U-L16 SERIES] ● Socket E678-32B SOLD SEPARATELY 22.86 4.45 2.92 12.7 20.32 22.86 2.54 20.32 0.51 12.7 1.57 MATERIAL: Glass Epoxy TACCA0094ED ● D Type Socket Assembly E6736 SOLD SEPARATELY 30.0 ± 0.5 28 29 27 3 23 4 22 5 21 6 20 7 19 11 13 12 450 ± 10 15.0 ± 0.5 30.0 ± 0.5 Pin No.1 5 10 Dy10 ORIENTATION BY MARKING P15 P16 P14 P8 SIGNAL OUTPUT : COAXIAL CABLE (GRAY) P1 P16 P15 P14 P13 P12 P11 P10 P9 P8 P7 P6 P5 P4 P3 P2 P1 POM HOUSING P16 P13 P11 P9 P7 P5 P3 P1 P2 POTTING COMPOUND -HV RG-174/U (RED) P12 P10 P8 P6 P4 K 26 Dy9 10 Dy8 24 Dy7 8 Dy6 2 Dy5 18 Dy4 31 Dy3 15 Dy2 32 Dy1 16 R14 R11 C3 R13 R10 C2 R12 R9 C1 R1 to R11 : 220 kΩ R12 to R14 : 51 Ω R15 : 1 MΩ C1 to C3 : 0.01 µF R8 Active base type E6572 is available. R7 R6 R5 R4 R3 R2 R15 R1 17 -HV : RG-174/U (RED) P1 to P16: SIGNAL OUTPUT COAXIAL CABLE (GRAY) TACCA0158EE WARNING ~ High Voltage ~ The product is operated at high voltage potential. Further, the metal housing of the product is connected to the photocathode (potential) so that it becomes a high voltage potential when the product is operated at a negative high voltage (anode grounded). Accordingly, extreme safety care must be taken for the electrical shock hazard to the operator or the damage to the other instruments. * PATENT: USA Pat. No. 5410211 PATENT PENDING: JAPAN 12, USA 8, EUROPE 9 WEB SITE http://www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Center 314-5, Shimokanzo, Toyooka-village, Iwata-gun, Shizuoka-ken, 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected] Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected] France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected] United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: [email protected] North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected] Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: [email protected] TPMH1285E01 MAY 2003 IP Printed in Japan (500)