Littelfuse LCE7.0A Tvs diode product Datasheet

PRODUCT
CATALOG
& DESIGN
GUIDE
DIODE
Transient Voltage Suppression
(TVS) Diode Products
Littelfuse Circuit Prot
Solutions Portf
Consumer Electronics Telecom White Goods Medical Equipment TVSS and Power S
DESIGN SUPPORT
Live Application Design and Technical Support—Tap into our expertise. Littelfuse engineers are available around the world to help you address design challenges and develop
unique, customized solutions for your products.
Product Sampling Programs—Most of our products are available as samples for testing and
veriﬁcation within your circuit design. Visit Littelfuse.com or contact a Littelfuse product
representative for additional information.
Product Evaluation Labs and Services—Littelfuse global labs are the hub of our new
product development initiatives, and also provide design and compliance support testing
as an added-value to our customers.
1
OVERVOLTAGE SUPPRESSION TECHNOLOGIES (1-6)
1. TVS Diodes — Suppress
overvoltage transients such
as Electrical Fast Transients
(EFT), inductive load switching
and lightning in a wide
variety of applications in the
computer, industrial, telecom
and automotive markets.
4. Gas Plasma Arrestors
(GDTs) — Available in small
footprint leaded and surface
mount conﬁgurations,
Littelfuse GDTs respond
fast to transient overvoltage
events, reducing the risk of
equipment damage.
2. Varistors — Multiple forms,
from Metal Oxide Varistors
(MOVs) that suppress transient
voltages to Multi-Layer Varistors
(MLVs) designed for applications
requiring protection from
various transients in computers
and handheld devices as well
as industrial and automotive
applications.
5. Silicon Protection
Arrays — Designed speciﬁcally
to protect analog and digital
signal lines from electrostatic
discharge (ESD) and other
overvoltage transients.
3. SIDACtor® Devices—
Complete line of protection
thyristor products speciﬁcally
designed to suppress
overvoltage transients in a
broad range of telecom and
datacom applications.
2
6. PulseGuard® ESD
Suppressors — Available in
various surface mount form
factors to protect high-speed
digital lines without causing
signal distortion.
Visit
tection
folio
Supplies Lighting General Electronics
3
5
SWITCHING
TECHNOLOGIES
ACCESSORIES
Switching Thyristors—
Solid-state switches used to
control the ﬂow of electrical
current in applications, capable
of withstanding rated blocking/
off-state voltage until triggered
to on-state.
In addition to our broad portfolio
of circuit protection technologies,
we offer an array of fuse holders
including circuit board, panel
or in-line wire mounted devices
to support a wide range of
application requirements.
7
OVERCURRENT
PROTECTION
TECHNOLOGIES (7-8)
7. Positive Temperature
Coefﬁcient Devices (PTCs)—
Provide resettable overcurrent
protection for a wide range of
applications.
4
6
www.littelfuse.com for more information.
8
8. Fuses — Full range including
surface mount, axial, glass or
ceramic, thin-ﬁlm or Nano2®
style, fast-acting or SloBlo®,
MINI® and ATO ® fuses.
Transient Voltage Suppression (TVS) Diodes
Littelfuse offers the widest range of TVS Diodes and other circuit protection products.
Littelfuse TVS Diodes are ideal for protecting semiconductor components from
high-voltage transients. They can respond to overvoltage events faster than most
other types of circuit protection. This makes TVS Diodes useful for protecting against
very fast and often damaging voltage transients, such as lightning, inductive load
switching and electrostatic discharge.
Littelfuse TVS Diodes can ﬁt a wide range of circuit protection applications but were
primarily designed to protect I/O interfaces in telecommunication and industrial
equipment, computers and consumer electronics.
Features
tLow incremental surge resistance
tUnidirectional and Bidirectional polarities available
t Reverse standoff voltages range from 5 to 512V
t RoHS compliant–Matte Tin Pb-free plated
t Surface-mount power ratings from 400W to 5,000W
t Axial lead power ratings from 400W to 30,000W (30kW)
t High current protection available for 6kA and 10kA
Transient Voltage Suppression Diodes
TVS Diode Products
TABLE OF CONTENTS
Overvoltage Suppression Facts ................ 2
Transient Voltage Scenarios ...................... 3
TVS Diode Terms & Deﬁnitions................. 4
TVS Diode Selection Checklist .................. 4
Type
Surface Mount - Standard Applications (400-5000W)
Series
SMAJ
TVS Diode Series
Data Sheet Start Page..................................
Page #
7
P4SMA
SACB
SMBJ
P6SMB
1KSMB
SMCJ
1.5SMC
SMDJ
5.0SMDJ
13
19
23
29
35
41
45
51
57
Photo
Operating
Temperature
-85° to +302° F
(-65° to +150° C)
Package Type
DO-214AC DO-214AC DO-214AA DO-214AA DO-214AA DO-214AA DO-214AB DO-214AB DO-214AB DO-214AB
12-170
Reverse Standoff
Voltage (VR)
5.0-440
5.0-50
5.8-495
5.0-440
5.8-495
5.8-136
5.0-440
5.8-495
5.0-170
uni-directional
12-45
bi-directional
Peak Pulse Power
Range† (PPP)
400W
400W
500W
600W
600W
Peak Pulse Current
(IPP 8x20μs)
1500W
1500W
3000W
5000W
Not Applicable
Maximum Clamping
Voltage (VC)
Refer to electrical characteristics table within each series data sheet
Compliant
Yes
RoHS
Pb Lead-Free
Type
1000W
Yes
Axial Leaded - Standard Applications (400-5000W)
Axial Leaded - High Power
Auto
Series
P4KE
SA
SAC
P6KE
1.5KE
LCE
3KP
5KP
15KPA
20KPA
30KPA
AK6
AK10
SLD
Page #
63
69
75
79
85
91
97
103
109
115
121
127
131
135
Photo
Operating
Temperature
Package Type
-85° to +302° F
(-65° to +150° C)
-67° to +347° F
(-55° to +175° C)
DO-41
DO-15
DO-15
DO-15
DO-201
DO-201
P600
P600
P600
Reverse Standoff
Voltage (VR)
5.8-495
5.0-180
5.0-50
5.8-512
5.8-495
6.5-90
5.0-220
5.0-250
17-280
Peak Pulse Power
Range† (PPP)
400W
500W
500W
600W
1500W
1500W
3000W
5000W
Peak Pulse Current
(IPP 8x20μs)
P600
P600
20.0-300 28.0-288
15000W 20000W 30000W
Not Applicable
Maximum Clamping
Voltage (VC)
Refer to electrical characteristics table within each series data sheet
Compliant
Yes
RoHS
†
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Radial
Lead
Radial
Lead
P600
58-430
58-430
10-24
NA
NA
2200 based on
1μs/150ms pulse
6000A
10000A
NA
Yes
Pb Lead-Free
©2008 Littelfuse, Inc.
-85° to +302° F
(-65° to +150° C)
1
based on 10/1000μs pulse unless stated otherwise
Transient Voltage Suppression Diodes
Overvoltage Suppression Facts
The exponential rise time of lightning is in the range
1.2μsec to 10μsec (essentially 10% to 90%) and the
duration is in the range of 50μsec to 1000μsec (50% of
peak values). ESD on the other hand, is a much shorter
duration event. The rise time has been characterized at less
than 1.0ns. The overall duration is approximately 100ns.
Transient Threats – What Are Transients?
Voltage Transients are deﬁned as short duration surges of
electrical energy and are the result of the sudden release
of energy previously stored or induced by other means,
such as heavy inductive loads or lightning. In electrical
or electronic circuits, this energy can be released in a
predictable manner via controlled switching actions, or
randomly induced into a circuit from external sources.
Why are Transients of Increasing Concern?
Component miniaturization has resulted in increased
sensitivity to electrical stresses. Microprocessors for
example, have structures and conductive paths which
are unable to handle high currents from ESD transients.
Such components operate at very low voltages, so
voltage disturbances must be controlled to prevent device
interruption and latent or catastrophic failures.
Repeatable transients are frequently caused by the
operation of motors, generators, or the switching of
reactive circuit components. Random transients, on the
other hand, are often caused by Lightning and Electrostatic
Discharge (ESD). Lightning and ESD generally occur
unpredictably, and may require elaborate monitoring to be
accurately measured, especially if induced at the circuit
board level. Numerous electronics standards groups have
analyzed transient voltage occurrences using accepted
monitoring or testing methods. The key characteristics of
several transients are shown in the table below.
VOLTAGE
CURRENT
Sensitive microprocessors are prevelant today in a wide
range of devices. Everything from home appliances, such
as dishwashers, to industrial controls and even toys use
microprocessors to improve functionality and efﬁciency.
Most vehicles now also employ multiple electronic
systems to control the engine, climate, braking and, in
some cases, steering, traction and safety systems.
RISE-TIME DURATION
Lighting
25kV
20kA
10 μs
1ms
Switching
600V
500A
50μs
500ms
EMP
1kV
10A
20ns
1ms
ESD
15kV
30A
<1ns
100ns
Many of the sub- or supporting components (such as
electric motors or accessories) within appliances and
automobiles present transient threats to the entire system.
Table 1. Examples of transient sources and magnitude
Careful circuit design should not only factor environmental
scenarios but also the potential effects of these related
components. Table 2 below shows the vulnerability of
various component technologies.
Characteristics of Transient Voltage Spikes
Transient voltage spikes generally exhibit a “double
exponential” wave, as shown below for lightning and ESD.
Vp
Vp/2
t1
t
t2
Figure 1. Lightning Transient Waveform
Device Type
Vulnerability (volts)
VMOS
30-1800
MOSFET
100-200
GaAsFET
100-300
EPROM
100
JFET
140-7000
CMOS
250-3000
Schottky Diodes
300-2500
Bipolar Transistors
380-7000
SCR
680-1000
Table 2: Range of device vulnerability.
Current (I) %
100%
90%
I30
I60
10%
30n
60n
tr = 0.7 to 1.0ns
Figure 2. ESD Test Waveform
2
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Transient Voltage Scenarios
Electrostatic Discharge (ESD)
Inductive Load Switching
Electrostatic discharge is characterized by very fast
rise times and very high peak voltages and currents.
This energy is the result of an imbalance of positive and
negative charges between objects.
The switching of inductive loads generates high energy
transients which increase in magnitude with increasingly
heavy loads. When the inductive load is switched off, the
collapsing magnetic ﬁeld is converted into electrical energy
which takes the form of a double exponential transient.
Depending on the source, these transients can be as large
as hundreds of volts and hundreds of Amps, with duration
times of 400 milliseconds.
ESD that is generated by everyday activities can far surpass
the vulnerability threshold of standard semiconductor
technologies. Following are a few examples:
t Walking across a carpet:
35kV @ RH = 20%;1.5kV @ RH = 65%
Typical sources of inductive transients include:
t Walking across a vinyl ﬂoor:
12kV @ RH = 20%;250V @ RH = 65%
t Worker at a bench:
6kV @ RH = 20%;100V @ RH = 65%
t Poly bag picked up from desk:
20kV @ RH = 20%;1.2kV @ RH = 65%
Even though a direct strike is clearly destructive, transients
induced by lightning are not the result of a direct strike.
When a lightning strike occurs, the event creates a
magnetic ﬁeld which can induce transients of large
magnitude in nearby
electrical cables.
PERCENT OF PEAK VALUE
100
90
50
10
t
t1
TIME
t2
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
tTransformer
T
V
T1
90%
VS
10%
t
A similar transient
VB
VS = 25V to 125V
T1 = 5ms to 10ms
VB = 14V
R = 0.5 to 4
can also be caused
T= 40ms to 400ms
by other DC motors
in a vehicle. For
example, DC motors power amenities such as power locks,
seats and windows. These various applications of a DC
motor can produce transients that are just as harmful to
the sensitive electronic components as transients created
in the external environment.
A cloud-to-cloud strike
will effect not only
overhead cables, but
also buried cables.
Even a strike 1 mile
distant (1.6km) can
generate 70 volts in
electrical cables.
O1
tRelay
The diagram at right
shows a transient
which is the result of
stored energy within
the alternator of an
automobile charging
system.
Lightning Induced Transients
This diagram shows
a typical current
waveform for induced
lightning disturbances.
tMotor
These examples are common in electrical and electronic
systems. Because the sizes of the loads vary according
to the application, the wave shape, duration, peak current
and peak voltage are all variables which exist in real world
transients. Once these variables can be approximated, a
suitable suppressor technology can be selected.
t Vinyl envelopes:
7kV @ RH = 20%;600V @ RH = 65%
In a cloud-to-ground
strike (as shown at
right) the transientgenerating effect is far
greater.
tGenerator
3
Transient Voltage Suppression Diodes
TVS Diode Terms & Deﬁnitions
TVS Diode Selection Checklist
Crowbar Device
1. Deﬁne Circuit Operating Parameters
The class of suppressors that exhibit a “crowbar”
characteristic is usally associated with 4-layer NPNP silicon
bipolar devices or gas plasma/GDT devices. Upon reaching
a threshold or breakover voltage, further increase in current
ﬂow will cause the device to rapidly conduct with only a few
volts of forward drop. In essence, the line is momentarily
“short-circuited” during the transient event.
Normal operating voltage type in DC or AC:
Device Type Required:
Uni-drectional
Bi-directional
Normal operating voltage in volts:
Maximum transient current (Ipp):
Maximum clamping voltage (Vc):
Operating Temperature Range
Required peak reverse surge power rating:
The minimum and maximum ambient operating temperature
of the circuit in which a device will be applied. Operating
temperature does not allow for the effects of adjacent
components, this is a parameter the designer must take into
consideration.
Product mounting type (package):
Operating temperature:
2. Narrow TVS Diode Series for the Application
Capacitance
Please refer to the product selection charts and data
sheets within this guide, factoring these key parameters:
The property of a circuit element that permits it to store
an electrical charge. In circuit protection, the off-state
capacitance is typically measured at 1 MHz with a 2V bias
applied.
Reverse Standoff Voltage (VR):
The device VR should be equal to, or great than, the
peak operating level of the circuit (or part of the circuit)
to be protected. This is to ensure that TVS Diode does
not clip the circuit drive voltage.
Reverse Standoff Voltage (VR)
In the case of a uni-directional TVS diode, this is the
maximum peak voltage that may be applied in the ‘blocking
direction’ with no signiﬁcant current ﬂow. In the case of
a bi-directional transient, it applies in either direction. It is
the same deﬁnition as Maximum Off-state Voltage and
Maximum Working Voltage.
Peak Pulse Current (IPP):
The Peak Pulse Current (IPP) identiﬁes the maximum
current the TVS Diode can withstand without damage.
The required IPP can only be determined by dividing the
peak transient voltage by the source impedance. Note
that the TVS Diode failure mechanism is a short circuit; if
the TVS Diode fails due to a transient, the circuit will still
be protected.
Breakdown Voltage (VBR)
Breakdown voltage measured at a speciﬁed DC test current,
typically 1mA. Usually a minimum and maximum is speciﬁed.
Maximum Clamping Voltage (VC):
This the peak voltage that will appear across the TVS
Diode when subjected to the Peak Pulse Current (IPP),
based on 10X1000us exponential waveform. The VC of
each TVS Diode is identiﬁed in each series data sheet
electrical characteristics table.
Peak Pulse Current (IPP)
Maximum pulse current which can be applied repetitively.
Usually a 10x1000μs double exponential waveform, but can
also be 8x20μs, if stated.
Maximum Clamping Voltage (VC or VCI)
3. Verify Ambient Operating Parameters
Maximum voltage which can be measured across the
protector when subjected to the Maximum Peak Pulse
Current.
Ensure that the application voltage is less than or equal
to the device’s standoff voltage, and that the operating
temperature limits are within those speciﬁed by the device.
Peak Pulse Power (PPP)
4. Verify Device Mounting Style and Dimensions
Expressed in Watts or Kilowatts, for a 1ms exponential
transient (see ﬁgure 1, page 23) it is IPP multiplied by VCL.
Please refer to the dimension drawings contained within
the data sheet of each series.
5. Test the Selected Device in Actual Application
Please contact Littelfuse if you would like assistance
with testing and verifying suitability of a Littelfuse device
within your product. We have extensive product testing lab
capabilities and technical expertise to assist you.
4
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
TVS Diode Products
Data Sheet Table of Contents
Surface Mount - Standard Applications (400 - 5000W)
RoHS
SMAJ series, Surface Mount - 400W
RoHS
P4SMA series, Surface Mount - 400W
13
7
RoHS
SACB series, Surface Mount - 500W
19
RoHS
SMBJ series, Surface Mount - 600W
23
RoHS
P6SMB series, Surface Mount - 600W
29
RoHS
1KSMB series, Surface Mount - 1000W
35
RoHS
SMCJ series, Surface Mount - 1500W
41
RoHS
1.5SMC series, Surface Mount - 1500W
45
RoHS
SMDJ series, Surface Mount - 3000W
51
RoHS
5.0SMDJ series, Surface Mount - 5000W
57
Axial Leaded - Standard Applications (400 - 5000W)
RoHS
P4KE series, Axial Leaded - 400W
63
RoHS
SA series, Axial Leaded - 500W
69
RoHS
SAC series, Axial Leaded - 500W
75
RoHS
P6KE series, Axial Leaded - 600W
79
RoHS
1.5KE series, Axial Leaded - 1500W
85
RoHS
LCE series, Axial Leaded - 1500W
91
RoHS
3KP series, Axial Leaded - 3000W
97
RoHS
5KP series, Axial Leaded - 5000W
103
Axial Leaded - High Power Applications (15000 - 30000W and 6 - 10kA)
RoHS
15KPA series, Axial Leaded - 15000W
RoHS
109
20KPA series, Axial Leaded - 20000W
115
RoHS
30KPA series, Axial Leaded - 30000W
121
RoHS
AK6 series, Axial Leaded - 6kA
127
RoHS
AK10 series, Axial Leaded -10kA
131
Axial Leaded - Automotive Applications
RoHS
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
SLD series, Axial Leaded - 2200W
5
135
Transient Voltage Suppression Diodes
6
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Surface Mount – 400W > SMAJ series
SMAJ Series
Description
The SMAJ series is designed speciﬁcally to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Features
t3P)4DPNQMJBOU
t'PSTVSGBDFNPVOUFE
applications to optimize
board space
t-PXQSPmMFQBDLBHF
t#VJMUJOTUSBJOSFMJFG
t(MBTTQBTTJWBUFEKVODUJPO
t-PXJOEVDUBODF
t&YDFMMFOUDMBNQJOH
capability
t81FBL1VMTFQPXFS
capability at 10 x 1000μs
waveform, repetition rate
(duty cycle): 0.01%
t'BTUSFTQPOTFUJNF
typically less than 1.0ps
from 0 Volts to VBR min
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Symbol
Value
Unit
Peak Pulse Power Dissipation at
TA=25ºC by 10x1000μs waveform
(Fig.1)(Note 1), (Note 2)
Parameter
PPPM
400
W
Power Dissipation on inﬁnite heat
sink at TA=50OC
PM(AV)
3.3
W
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave (Note 3)
IFSM
40
A
Maximum Instantaneous Forward
Voltage at 25A for Unidirectional
only (Note 4)
VF
3.5V/6.5
V
TJ , TSTG
-65 to 150
°C
Typical Thermal Resistance Junction
to Lead
RuJL
30
°C/W
Typical Thermal Resistance Junction
to Ambient
RuJA
120
°C/W
Operating Junction and Storage
Temperature Range
t5ZQJDBM*R less than 1μA
above 12V
t)JHIUFNQFSBUVSF
soldering: 260°C/40
seconds at terminals
t5ZQJDBMNBYJNVN
temperature coefﬁcient
delta VBR = 0.1% x VBR
@ 25°C
t1MBTUJDQBDLBHFIBT
Underwriters Laboratory
Flammability 94V-O
t.BUUF5JO-FBEoGSFF
Plated
Applications
TVS devices are ideal for the protection of I/O Interfaces,
VCC bus and other vulnerable circuits used in Telecom,
Computer, Industrial and Consumer electronic applications.
Notes:
1. Non-repetitive current pulse, per Fig.3 and derated above TA=25ºC per Fig. 2.
2. Mounted on 5.0x5.0mm copper pad to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only.
4. VF < 3.5V for VBR <
_ 200V and VF< 6.5V for VBR >
_ 201V.
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
7
SMAJ Series
SMAJ Series
RoHS
Transient Voltage Suppression Diodes
Surface Mount – 400W > SMAJ series
Electrical Characteristics
Part
Number
(Uni)
Part
Number
(Bi)
SMAJ5.0A
SMAJ6.0A
SMAJ6.5A
SMAJ7.0A
SMAJ7.5A
SMAJ8.0A
SMAJ8.5A
SMAJ9.0A
SMAJ10A
SMAJ11A
SMAJ12A
SMAJ13A
SMAJ14A
SMAJ15A
SMAJ16A
SMAJ17A
SMAJ18A
SMAJ20A
SMAJ22A
SMAJ24A
SMAJ26A
SMAJ28A
SMAJ30A
SMAJ33A
SMAJ36A
SMAJ40A
SMAJ43A
SMAJ45A
SMAJ48A
SMAJ51A
SMAJ54A
SMAJ58A
SMAJ60A
SMAJ64A
SMAJ70A
SMAJ75A
SMAJ78A
SMAJ85A
SMAJ90A
SMAJ100A
SMAJ110A
SMAJ120A
SMAJ130A
SMAJ150A
SMAJ160A
SMAJ170A
SMAJ180A
SMAJ200A
SMAJ220A
SMAJ250A
SMAJ300A
SMAJ350A
SMAJ400A
SMAJ440A
SMAJ5.0CA
SMAJ6.0CA
SMAJ6.5CA
SMAJ7.0CA
SMAJ7.5CA
SMAJ8.0CA
SMAJ8.5CA
SMAJ9.0CA
SMAJ10CA
SMAJ11CA
SMAJ12CA
SMAJ13CA
SMAJ14CA
SMAJ15CA
SMAJ16CA
SMAJ17CA
SMAJ18CA
SMAJ20CA
SMAJ22CA
SMAJ24CA
SMAJ26CA
SMAJ28CA
SMAJ30CA
SMAJ33CA
SMAJ36CA
SMAJ40CA
SMAJ43CA
SMAJ45CA
SMAJ48CA
SMAJ51CA
SMAJ54CA
SMAJ58CA
SMAJ60CA
SMAJ64CA
SMAJ70CA
SMAJ75CA
SMAJ78CA
SMAJ85CA
SMAJ90CA
SMAJ100CA
SMAJ110CA
SMAJ120CA
SMAJ130CA
SMAJ150CA
SMAJ160CA
SMAJ170CA
SMAJ180CA
SMAJ200CA
SMAJ220CA
SMAJ250CA
SMAJ300CA
SMAJ350CA
SMAJ400CA
SMAJ440CA
Marking
UNI
BI
AE
AG
AK
AM
AP
AR
AT
AV
AX
AZ
BE
BG
BK
BM
BP
BR
BT
BV
BX
BZ
CE
CG
CK
CM
CP
CR
CT
CV
CX
CZ
RE
RG
RK
RM
RP
RR
RT
RV
RX
RZ
SE
SG
SK
SM
SP
SR
ST
SV
SX
SZ
TE
TG
TK
TM
WE
WG
WK
WM
WP
WR
WT
WV
WX
WZ
XE
XG
XK
XM
XP
XR
XT
XV
XX
XZ
YE
YG
YK
YM
YP
YR
YT
YV
YX
YZ
ZE
ZG
ZK
ZM
ZP
ZR
ZT
ZV
ZX
ZZ
VE
VG
VK
VM
VP
VR
VT
VV
VX
VZ
UE
UG
UK
UM
Reverse
Stand off
Voltage VR
(Volts)
5.0
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
20.0
22.0
24.0
26.0
28.0
30.0
33.0
36.0
40.0
43.0
45.0
48.0
51.0
54.0
58.0
60.0
64.0
70.0
75.0
78.0
85.0
90.0
100.0
110.0
120.0
130.0
150.0
160.0
170.0
180.0
200.0
220.0
250.0
300.0
350.0
400.0
440.0
Breakdown
Voltage VBR
(Volts) @ IT
MIN
MAX
Test
Current
IT
(mA)
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.00
11.10
12.20
13.30
14.40
15.60
16.70
17.80
18.90
20.00
22.20
24.40
26.70
28.90
31.10
33.30
36.70
40.00
44.40
47.80
50.00
53.30
56.70
60.00
64.40
66.70
71.10
77.80
83.30
86.70
94.40
100.00
111.00
122.00
133.00
144.00
167.00
178.00
189.00
201.00
224.00
246.00
279.00
335.00
391.00
447.00
492.00
07.00
07.37
7.98
8.60
9.21
9.83
10.40
11.10
12.30
13.50
14.70
15.90
17.20
18.50
19.70
20.90
22.10
24.50
26.90
29.50
31.90
34.40
36.80
40.60
44.20
49.10
52.80
55.30
58.90
62.70
66.30
71.20
73.70
78.60
86.00
92.10
95.80
104.00
111.00
123.00
135.00
147.00
159.00
185.00
197.00
209.00
222.00
247.00
272.00
309.00
371.00
432.00
494.00
543.00
10
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Maximum Maximum Maximum
Agency
Clamping
Peak
Reverse
Approval
Voltage VC
Pulse
Leakage IR
@ Ipp
Current Ipp
@ VR
(V)
(A)
(μA)
9.2
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103.0
113.0
121.0
126.0
137.0
146.0
162.0
177.0
193.0
209.0
243.0
259.0
275.0
292.0
324.0
356.0
405.0
486.0
567.0
648.0
713.0
43.5
38.8
35.7
33.3
31.0
29.4
27.8
26.0
23.5
22.0
20.1
18.6
17.2
16.4
15.4
14.5
13.7
12.3
11.3
10.3
9.5
8.8
8.3
7.5
6.9
6.2
5.8
5.5
5.2
4.9
4.6
4.3
4.1
3.9
3.5
3.3
3.2
2.9
2.7
2.5
2.3
2.1
1.9
1.6
1.5
1.5
1.4
1.2
1.1
1.0
0.8
0.7
0.6
0.6
800
800
500
200
100
50
20
10
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
For bidirectional type having VRWM of 10 volts and less, the IR limit is double.
For parts without A (VBR is ± 10% and VC is 5% higher than with A parts).
SMAJ Series
8
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Surface Mount – 400W > SMAJ series
Ratings and Characteristic Curves (T =25°C unless otherwise noted)
A
Figure 1 - Peak Pulse Power Rating Curve
Figure 2 - Pulse Derating Curve
100
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage %
PPPM-Peak Pulse Power (kW)
10
1
0.2x0.2" (5.0x5.0mm)
Copper Pad Area
0.1
0.000001
80
60
40
20
0
0.00001
0.0001
0.001
0
25
td-Pulse Width (sec.)
50
75
100
125
150
175
TA-Ambient temperature (ºC)
Figure 4 - Typical Junction Capacitance
Figure 3 - Pulse Waveform
tr=10μsec
TJ=25°C
Pulse Width(td) is deﬁned
as the point where the peak
current decays to 50% of IPPM
Peak Value
IPPM
100
10000
Bi-directional V=0V
1000
Half Value
IPPM IPPM
Cj (pF)
IPPM- Peak Pulse Current, % IRSM
150
( )
2
50
10
Tj=25ºC
f=1.0MHz
Vsig=50mVp-p
td
1
1.0
0
Uni-directional @VR
100
Bi-directional @VR
10/1000μsec. Waveform
as deﬁned by R.E.A
0
Uni-directional V=0V
2.0
3.0
1.0
4.0
Figure 5 - Steady State Power Dissipation Derating
Curve
100.0
1000.0
Figure 6 - Maximum Non-Repetitive Forward Surge
Current Uni-Directional Only
45
1.2
IFSM - Peak Forward Surve Current
(A)
PM(AV), Steady State Power Dissipation (W)
10.0
VBR - Reverse Breakdown Voltage (V)
t-Time (ms)
1
0.8
0.6
0.4
0.2
40
35
30
25
20
15
10
5
0
0
0
25
50
75
100 125 150
TA - Ambient Temperature (ºC)
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
1
175
10
100
Number of Cycles at 60 Hz
9
SMAJ Series
Transient Voltage Suppression Diodes
Surface Mount – 400W > SMAJ series
Soldering Parameters
Reﬂow Condition
-FBEoGSFFBTTFNCMZ
tp
TP
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
oTFDT
Ramp-up
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
3°C/second max
Reﬂow
Critical Zone
TL to TP
TL
- Temperature (TL) (Liquidus)
217°C
- Time (min to max) (ts)
oTFDPOET
Temperature (T)
Pre Heat
- Temperature Min (Ts(min))
tL
Ts(max)
Ramp-down
Ts(min)
ts
Preheat
25˚C
t 25˚C to Peak
Peak Temperature (TP)
260
Time within 5°C of actual peak
Temperature (tp)
oTFDPOET
Ramp-down Rate
6°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
280°C
+0/-5
Time (t)
°C
Physical Speciﬁcations
Environmental Speciﬁcations
Weight
0.002 ounce, 0.061 gram
Temperature Cycle
MIL-STD-883F, Method 1010.8
Case
JEDEC DO-214AC Molded Plastic over
glass passivated junction
Pressure Cooker
JESD 22-A102C
Polarity
Color band denotes cathode except Bipolar
High Temp. Storage
JESD 22-A103C
Terminal
Matte Tin-plated leads, Solderable per
JESD22-B102D
HTRB
JESD , 22-108C
Thermal Shock
JESD 22 A 106
Dimensions
DO-214AC (SMA)
Dimensions
Cathode Band
C
A
B
H
D
F
E
G
J
K
L
I
SMAJ Series
10
Inches
Millimeters
Min
Max
Min
Max
A
0.049
0.065
1.250
1.650
B
0.157
0.177
3.990
4.500
C
0.100
0.110
2.540
2.790
D
0.078
0.090
1.980
2.290
E
0.030
0.060
0.780
1.520
F
-
0.008
-
0.203
G
0.194
0.208
4.930
5.280
H
0.006
0.012
0.152
0.305
I
0.070
-
1.800
-
J
0.082
-
2.100
-
K
-
0.090
-
2.300
L
0.082
-
2.100
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Surface Mount – 400W > SMAJ series
Part Numbering System
Part Marking System
SMAJ XXX C A
Cathode Band
XXX
5% VOLTAGE TOLERANCE
BI-DIRECTIONAL
F
VOLTAGE
SERIES
Littelfuse Logo
Marking Code
Packaging
Part number
Component
Package
SMAJxxxXX
DO-214AC
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Quantity
5000
Packaging
Option
5BQF3FFMoNNwUBQF
11
Packaging
Speciﬁcation
EIA RS-481
SMAJ Series
Transient Voltage Suppression Diodes
12
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Surface Mount – 400W > P4SMA series
P4SMA Series
Description
The P4SMA series is designed speciﬁcally to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Features
t 3P)4DPNQMJBOU
t 'PSTVSGBDFNPVOUFE
applications to optimize
board space
t -PXQSPmMFQBDLBHF
t #VJMUJOTUSBJOSFMJFG
t 5ZQJDBMNBYJNVN
temperature coefﬁcient
VBR = 0.1% × VBR@25°C
t (MBTTQBTTJWBUFEDIJQ
junction
t 8QFBLQVMTFQPXFS
capability at 10×1000μs
waveform, repetition rate
(duty cycles):0.01%
t 'BTUSFTQPOTFUJNF
typically less than 1.0ps
from 0V to BV min
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Symbol
Value
Unit
Peak Pulse Power Dissipation at
TA=25ºC by 10x1000μs waveform
(Fig.1)(Note 1), (Note 2)
Parameter
PPPM
400
W
Power Dissipation on inﬁnite heat
sink at TA=50OC
PM(AV)
3.3
W
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave (Note 3)
IFSM
40
A
Maximum Instantaneous Forward
Voltage at 25A for Unidirectional
only (Note 4)
VF
3.5V/6.5
V
TJ , TSTG
-65 to 150
°C
Typical Thermal Resistance Junction
to Lead
RuJL
30
°C/W
Typical Thermal Resistance Junction
to Ambient
RuJA
120
°C/W
Operating Junction and Storage
Temperature Range
t &YDFMMFOUDMBNQJOH
capability
t -PXJODSFNFOUBMTVSHF
resistance
t 5ZQJDBM*R less than 1μA
above 12V
t )JHI5FNQFSBUVSF
soldering guaranteed:
260°C/40 seconds at
terminals
t 1MBTUJDQBDLBHFIBT
Underwriters Laboratory
Flammability 94V-O
t .BUUF5JO-FBEoGSFF
Plated
Applications
TVS devices are ideal for the protection of I/O Interfaces,
VCC bus and other vulnerable circuits used in Telecom,
Computer, Industrial and Consumer electronic applications.
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2 .
2. Mounted on 0.2x0.2” (5.0 x 5.0mm) copper pad to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only, duty cycle=4 per minute maximum.
4. VF<3.5V for VBR <
_ 200V and VF<6.5V for VBR >
_ 201V.
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
13
P4SMA Series
P4SMA Series
RoHS
Transient Voltage Suppression Diodes
Surface Mount – 400W > P4SMA series
Electrical Characteristics
Part
Number
(Uni)
Part
Number
(Bi)
P4SMA6.8A
P4SMA7.5A
P4SMA8.2A
P4SMA9.1A
P4SMA10A
P4SMA11A
P4SMA12A
P4SMA13A
P4SMA15A
P4SMA16A
P4SMA18A
P4SMA20A
P4SMA22A
P4SMA24A
P4SMA27A
P4SMA30A
P4SMA33A
P4SMA36A
P4SMA39A
P4SMA43A
P4SMA47A
P4SMA51A
P4SMA56A
P4SMA62A
P4SMA68A
P4SMA75A
P4SMA82A
P4SMA91A
P4SMA100A
P4SMA110A
P4SMA120A
P4SMA130A
P4SMA150A
P4SMA160A
P4SMA170A
P4SMA180A
P4SMA200A
P4SMA220A
P4SMA250A
P4SMA300A
P4SMA350A
P4SMA400A
P4SMA440A
P4SMA480A
P4SMA510A
P4SMA530A
P4SMA540A
P4SMA550A
P4SMA6.8CA
P4SMA7.5CA
P4SMA8.2CA
P4SMA9.1CA
P4SMA10CA
P4SMA11CA
P4SMA12CA
P4SMA13CA
P4SMA15CA
P4SMA16CA
P4SMA18CA
P4SMA20CA
P4SMA22CA
P4SMA24CA
P4SMA27CA
P4SMA30CA
P4SMA33CA
P4SMA36CA
P4SMA39CA
P4SMA43CA
P4SMA47CA
P4SMA51CA
P4SMA56CA
P4SMA62CA
P4SMA68CA
P4SMA75CA
P4SMA82CA
P4SMA91CA
P4SMA100CA
P4SMA110CA
P4SMA120CA
P4SMA130CA
P4SMA150CA
P4SMA160CA
P4SMA170CA
P4SMA180CA
P4SMA200CA
P4SMA220CA
P4SMA250CA
P4SMA300CA
P4SMA350CA
P4SMA400CA
P4SMA440CA
P4SMA480CA
P4SMA510CA
P4SMA530CA
P4SMA540CA
P4SMA550CA
Marking
UNI
BI
6V8A
7V5A
8V2A
9V1A
10A
11A
12A
13A
15A
16A
18A
20A
22A
24A
27A
30A
33A
36A
39A
43A
47A
51A
56A
62A
68A
75A
82A
91A
100A
110A
120A
130A
150A
160A
170A
180A
200A
220A
250A
300A
350A
400A
440A
480A
510A
530A
540A
550A
6V8C
7V5C
8V2C
9V1C
10C
11C
12C
13C
15C
16C
18C
20C
22C
24C
27C
30C
33C
36C
39C
43C
47C
51C
56C
62C
68C
75C
82C
91C
100C
110C
120C
130C
150C
160C
170C
180C
200C
220C
250C
300C
350C
400C
440C
480C
510C
530C
540C
550C
Reverse
Stand off
Voltage VR
(Volts)
5.80
6.40
7.02
7.78
8.55
9.40
10.20
11.10
12.80
13.60
15.30
17.10
18.80
20.50
23.10
25.60
28.20
30.80
33.30
36.80
40.20
43.60
47.80
53.00
58.10
64.10
70.10
77.80
85.50
94.00
102.00
111.00
128.00
136.00
145.00
154.00
171.00
185.00
214.00
256.00
300.00
342.00
376.00
408.00
434.00
477.00
486.00
495.00
Breakdown
Voltage VBR
(Volts) @ IT
MIN
MAX
6.45
7.13
7.79
8.65
9.50
10.50
11.40
12.40
14.30
15.20
17.10
19.00
20.90
22.80
25.70
28.50
31.40
34.20
37.10
40.90
44.70
48.50
53.20
58.90
64.60
71.30
77.90
86.50
95.00
105.00
114.00
124.00
143.00
152.00
162.00
171.00
190.00
209.00
237.00
285.00
332.00
380.00
418.00
456.00
485.00
503.50
513.00
522.50
7.14
7.88
8.61
9.55
10.50
11.60
12.60
13.70
15.80
16.80
18.90
21.00
23.10
25.20
28.40
31.50
34.70
37.80
41.00
45.20
49.40
53.60
58.80
65.10
71.40
78.80
86.10
95.50
105.00
116.00
126.00
137.00
158.00
168.00
179.00
189.00
210.00
231.00
263.00
315.00
368.00
420.00
462.00
504.00
535.00
556.50
567.00
577.50
Maximum Maximum Maximum
Test
Agency
Peak
Reverse
Current Clamping
Approval
Voltage VC
Pulse
Leakage IR
IT
@ Ipp
Current Ipp
@ VR
(mA)
(V)
(A)
(μA)
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10.5
11.3
12.1
13.4
14.5
15.6
16.7
18.2
21.2
22.5
25.5
27.7
30.6
33.2
37.5
41.4
45.7
49.9
53.9
59.3
64.8
70.1
77.0
85.0
92.0
103.0
113.0
125.0
137.0
152.0
165.0
179.0
207.0
219.0
234.0
246.0
274.0
328.0
344.0
414.0
482.0
548.0
602.0
658.0
698.0
725.0
740.0
760.0
39.0
36.3
33.9
30.6
28.3
26.3
24.6
22.5
19.3
18.2
16.1
14.8
13.4
12.3
10.9
9.9
9.0
8.2
7.6
6.9
6.3
5.8
5.3
4.8
4.5
4.0
3.6
3.3
3.0
2.7
2.5
2.3
2.0
1.9
1.8
1.7
1.5
1.3
1.2
1.0
0.9
0.8
0.7
0.6
0.6
0.6
0.5
0.5
1000
500
200
50
10
5
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
The avaliable parts are “A” type only, the parts without A (VBR is ± 10%) is not avaliable.
For bidirectional type having VR of 10 volts and less, the IR limit is double.
P4SMA Series
14
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Surface Mount – 400W > P4SMA series
Ratings and Characteristic Curves (T =25°C unless otherwise noted)
A
Figure 1 - Peak Pulse Power Rating
Figure 2 - Pulse Derating Curve
100
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage %
PPPM-Peak Pulse Power (kW)
10
1
0.2x0.2" (5.0x5.0mm)
Copper Pad Area
0.1
0.000001
80
60
40
20
0
0.00001
0.0001
0.001
0
Figure 3 - Pulse Waveform
75
100
125
150
175
10000
tr=10μsec
TJ=25°C
Pulse Width(td) is deﬁned
as the point where the peak
current decays to 50% of IPPM
Peak Value
IPPM
100
Bi-directional V=0V
1000
Cj (pF)
IPPM- Peak Pulse Current, % IRSM
50
Figure 4 - Typical Junction Capacitance
150
Half Value
IPPM IPPM
( )
2
Uni-directional V=0V
Uni-directional @VR
100
Bi-directional @VR
50
10/1000μsec. Waveform
as deﬁned by R.E.A
10
Tj=25ºC
f=1.0MHz
Vsig=50mVp-p
td
0
1.0
0
2.0
3.0
1
1.0
4.0
10.0
100.0
1000.0
VBR - Reverse Breakdown Voltage (V)
t-Time (ms)
Figure 6 - Maximum Non-Repetitive Forward Surge
Current Uni-Directional Only
Figure 5 - Steady State Power Dissipation Derating Curve
1.2
45
IFSM - Peak Forward Surge Current (A)
PM(AV), Steady State Power Dissipation
(W)
25
TA-Ambient temperature (ºC)
td-Pulse Width (sec.)
1
0.8
0.6
0.4
0.2
0
0
25
50
75
100
125
150
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
35
30
25
20
15
10
5
0
175
1
TA - Ambient Temperature (ºC)
©2008 Littelfuse, Inc.
40
10
100
Number of Cyles at 60 Hz
15
P4SMA Series
Transient Voltage Suppression Diodes
Surface Mount – 400W > P4SMA series
Soldering Parameters
Reﬂow Condition
-FBEoGSFFBTTFNCMZ
tp
TP
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
oTFDT
Ramp-up
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
3°C/second max
Reﬂow
Critical Zone
TL to TP
TL
- Temperature (TL) (Liquidus)
217°C
- Time (min to max) (ts)
oTFDPOET
Temperature (T)
Pre Heat
- Temperature Min (Ts(min))
tL
Ts(max)
Ramp-down
Ts(min)
ts
Preheat
25˚C
t 25˚C to Peak
Peak Temperature (TP)
260
Time within 5°C of actual peak
Temperature (tp)
oTFDPOET
Ramp-down Rate
6°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
280°C
+0/-5
Time (t)
°C
Physical Speciﬁcations
Environmental Speciﬁcations
Weight
0.002 ounce, 0.061 gram
Temperature Cycle
JESD22-A104
Case
JEDEC DO-214AC. Molded plastic body
over glass passivated junction
Pressure Cooker
JESD 22-A102
Polarity
Color band denotes positive end
(cathode) except bidirectional
High Temp. Storage
JESD22-A103
Terminal
Matte Tin-plated leads, Solderable per
JESD22-B102D
HTRB
JESD22-A108
Thermal Shock
JESD22-A106
Dimensions
DO-214AC (SMA)
Dimensions
Cathode Band
C
A
B
H
D
F
E
G
J
K
L
I
P4SMA Series
16
Inches
Millimeters
Min
Max
Min
Max
A
0.049
0.065
1.250
1.650
B
0.157
0.177
3.990
4.500
C
0.100
0.110
2.540
2.790
D
0.078
0.090
1.980
2.290
E
0.030
0.060
0.780
1.520
F
-
0.008
-
0.203
G
0.194
0.208
4.930
5.280
H
0.006
0.012
0.152
0.305
I
0.070
-
1.800
-
J
0.082
-
2.100
-
K
-
0.090
-
2.300
L
0.082
-
2.100
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Surface Mount – 400W > P4SMA series
Part Numbering System
Part Marking System
Cathode Band
P4SMA XXX C A
XXX
5% VOLTAGE TOLERANCE
F
BI-DIRECTIONAL
VOLTAGE
SERIES
Littelfuse Logo
Marking Code
Packaging
Part number
Component
Package
P4SMAxxxXX
DO-214AC
Quantity
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
5000
Packaging
Option
5BQF3FFMoNNwUBQF
17
Packaging
Speciﬁcation
EIA STD RS-481
P4SMA Series
Transient Voltage Suppression Diodes
18
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Surface Mount – 500W > SACB series
SACB Series
Description
SACB series is designed specifically to protect sensitive
electronic equipment from voltage transients induced by
lightning and other transient voltage events.
Features
t 3P)4DPNQMJBOU
t 'PSTVSGBDFNPVOUFE
applications in order to
optimize board space
t -PXQSPmMFQBDLBHF
t #VJMUJOTUSBJOSFMJFG
t 5ZQJDBMNBYJNVN
temperature coefﬁcient
ΔVBR = 0.1% × VBR@25°C
t (MBTTQBTTJWBUFEDIJQ
junction
t 8QFBLQVMTFQPXFS
capability at 10×1000μs
waveform, repetition rate
(duty cycles):0.01%
t 'BTUSFTQPOTFUJNF
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Symbol
Value
Unit
Peak pulse power dissipation at
ta=25OC by 10×1000μs waveform
PPPM
500
W
(ﬁg.1)( Note 1)
Power dissipation on inﬁnite heat
PM(AV)
3.0
W
sink at TL=50ºC
Peak Pulse Power Dissipation at
See
Ta=25ºC by 10×1000μs waveform
IPPM
Amps
Table 1
(Fig. 3) (Note 1)
Operating Junction and Storage
°C
TJ , TSTG -65 to 150
Temperature Range
Typical Thermal Resistance Junction
RuJL
30
°C/W
to Lead
Typical Thermal Resistance Junction
RuJA
120
°C/W
to Ambient
typically less than 1.0ps
from 0V to BV min
t &YDFMMFOUDMBNQJOH
capability
t -PXJODSFNFOUBMTVSHF
resistance
t )JHI5FNQFSBUVSF
soldering guaranteed:
260°C/40 seconds at
terminals
t 1MBTUJDQBDLBHFIBT
Underwriters Laboratory
Flammability 94V-O
t .BUUF5JO-FBEoGSFF
Plated
Applications
TVS devices are ideal for the protection of I/O Interfaces,
VCC bus and other vulnerable circuits used in Telecom,
Computer, Industrial and Consumer electronic applications.
Note:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
19
SACB Series
SACB Series
RoHS
Transient Voltage Suppression Diodes
Surface Mount – 500W > SACB series
Electrical Characteristics
Maximum
Minimum Maximum Maximum
Maximum Working
Peak
Stand-Off
Breakdown Reverse Clamping
Junction
Inverse
Pulse
Part
Marking Voltage
Voltage at Leakage Voltage at
Current Capacitance Blocking
Number Code (Note1) VR
IPP=5.0A
IT =1.0MA
at VR IR
at
Voltage
per (Fig.3)
(V)
(μA)
0 Volts (pF)
VWIB(V)
VBR(V)
VC(V)
IPP(A)
SACB5.0
SACB6.0
SACB7.0
SACB8.0
SACB8.5
SACB10
SACB12
SACB15
SACB18
SACB22
SACB26
SACB30
SACB36
SACB45
SACB50
SKE
SKG
SKM
SKR
SKT
SKX
SLE
SLM
SLT
SLX
SME
SMK
SMP
SMV
SMZ
5.0
6.0
7.0
8.0
8.5
10.0
12.0
15.0
18.0
22.0
26.0
30.0
36.0
45.0
50.0
7.60
7.90
8.33
8.89
9.44
11.10
13.30
16.70
20.00
24.40
28.90
33.30
40.00
50.00
55.50
300
300
300
100
50
5
5
5
5
5
5
5
5
5
5
10.0
11.2
12.6
13.4
14.0
16.3
19.0
23.6
28.8
35.4
42.3
48.6
60.0
77.0
88.0
44.0
41.0
38.0
36.0
34.0
29.0
25.0
20.0
15.0
14.0
11.1
10.0
8.6
6.8
5.8
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
Inverse
Blocking Peak Inverse
Leakage
UL
Blocking
Current at Voltage V
Recognition
PIB
VWIB@ IIB
(V)
(mA)
75
75
75
75
75
75
75
75
75
75
75
75
75
150
150
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
100
100
100
100
100
100
100
100
100
100
100
100
100
200
200
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Ratings and Characteristic Curves (T ==25°C
25°Cunless
unlessotherwise
otherwisenoted
noted)
A
Figure 1 - Peak Pulse Power Rating Curve
Figure 2 - Pulse Derating Curve
100
100
30
Percentage of Rated Power (%)
IPPM - Peak Pulse Power (kW)
Average Power
Non-repetitive Pulse
Waveform shown in Fig. 3
T A =25°C
10
Impulse
Exponential
Decay
P PK ".5"
1
td
Half Sine
td
P PK
td=7tp
P PK
Peak Power
(Single Pulse)
50
25
Square
td
0
Current Waveforms
0.1
0.1s
75
1.0s
10s
100s
1.0ms
0
10ms
25
50
75
100
125
150
TL - Lead Temperature (ºC)
t d - Pulse Width (sec.)
Figure 3 - Pulse Waveform
Figure 4 - AC Line Protection Application
IPPM- Peak Pulse Current, % IRSM
150
tr=10μsec
TJ=25°C
Pulse Width(td) is deﬁned
as the point where the peak
current decays to 50% of IPPM
Peak Value
IPPM
100
Half Value
IPPM IPPM
( )
2
50
10/1000μsec. Waveform
as deﬁned by R.E.A
Low Capacitance
0
td
0
1.0
2.0
3.0
Application Note: Device must be used with two
units in parallel, opposite in polarity as shown in
circuit for AC signal line protection.
4.0
t-Time (ms)
SACB Series
20
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Surface Mount – 500W > SACB series
Soldering Parameters
Reﬂow Condition
-FBEoGSFFBTTFNCMZ
tp
TP
Pre Heat
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
oTFDT
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
3°C/second max
Reﬂow
- Temperature (TL) (Liquidus)
217°C
- Time (min to max) (ts)
oTFDPOET
Ramp-up
Critical Zone
TL to TP
TL
Temperature (T)
- Temperature Min (Ts(min))
tL
Ts(max)
Ramp-down
Ts(min)
ts
Preheat
25˚C
t 25˚C to Peak
Time (t)
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
oTFDPOET
Flow/Wave Soldering (Solder Dipping)
Ramp-down Rate
6°C/second max
Peak Temperature :
265OC
Time 25°C to peak Temperature (TP)
8 minutes Max.
Dipping Time :
10 seconds
Do not exceed
280°C
Soldering :
1 time
Physical Speciﬁcations
Environmental Speciﬁcations
Weight
0.003oz., 0.093g
Temperature Cycle
JESD22-A104
Case
JEDEC DO-214AA molded plastic body
over glass passivated junction.
Pressure Cooker
JESD 22-A102
Polarity
Color band denotes cathode except
Bidirectional
High Temp. Storage
JESD22-A103
Terminal
Matte Tin-plated leads. Solderable per
JESD22-B102D.
HTRB
JESD22-A108
Thermal Shock
JESD22-A106
Dimensions
DO-214AA (SMB J-Bend)
Dimensions
Cathode Band
C
A
B
H
D
E
Inches
Millimeters
Min
Max
Min
Max
A
0.077
0.086
1.950
2.200
B
0.160
0.180
4.060
4.570
C
0.130
0.155
3.300
3.940
D
0.084
0.096
2.130
2.440
E
0.030
0.060
0.760
1.520
F
-
0.008
-
0.203
G
0.205
0.220
5.210
5.590
H
0.006
0.012
0.152
0.305
F
G
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
21
SACB Series
Transient Voltage Suppression Diodes
Surface Mount – 500W > SACB series
Part Numbering System
SACB
Cathode Band
XX
XXX
Series Type
Part Marking System
Stand Off Voltage
F
Littelfuse Logo
Product Type
Packaging
Part number
SACBXX
Component
Package
DO-214AA
Quantity
3000
Packaging
Option
5BQF3FFMoNNwUBQF
Packaging Speciﬁcation
EIA STD RS-481
Schematic
Transient
Voltage
Suppressor
Diode
SACB Series
22
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Surface Mount – 600W > SMBJ series
SMBJ Series
Description
The SMBJ series is designed speciﬁcally to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Features
t 3P)4DPNQMJBOU
t 'PSTVSGBDFNPVOUFE
applications to optimize
board space
t -PXQSPmMFQBDLBHF
t #VJMUJOTUSBJOSFMJFG
t 5ZQJDBMNBYJNVN
temperature coefﬁcient
Δ VBR =0.1% × VBR@25°C
t (MBTTQBTTJWBUFEDIJQ
junction
t 8QFBLQVMTFQPXFS
capability at 10×1000μs
waveform, repetition rate
(duty cycles):0.01%
t 'BTUSFTQPOTFUJNF
typically less than 1.0ps
from 0V to BV min
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E128662/E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Symbol
Value
Unit
Peak Pulse Power Dissipation at
TA=25ºC by 10x1000μs waveform
(Fig.1)(Note 1), (Note 2)
PPPM
600
W
Power Dissipation on inﬁnite heat
sink at TA=50OC
PM(AV)
5.0
W
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave (Note 3)
IFSM
100
A
Maximum Instantaneous Forward
Voltage at 50A for Unidirectional
only (Note 4)
VF
3.5V/5.0
V
TJ , TSTG
-65 to 150
°C
Typical Thermal Resistance Junction
to Lead
RuJL
20
°C/W
Typical Thermal Resistance Junction
to Ambient
RuJA
100
°C/W
Operating Junction and Storage
Temperature Range
t &YDFMMFOUDMBNQJOH
capability
t -PXJODSFNFOUBMTVSHF
resistance
t 5ZQJDBM*R less than 1μA
above 12V
t )JHI5FNQFSBUVSF
soldering guaranteed:
260°C/40 seconds at
terminals
t 1MBTUJDQBDLBHFIBT
Underwriters Laboratory
Flammability 94V-O
t .BUUF5JO-FBEoGSFF
Plated
Applications
TVS devices are ideal for the protection of I/O Interfaces,
VCC bus and other vulnerable circuits used in Telecom,
Computer, Industrial and Consumer electronic applications.
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Mounted on copper pad area of 0.2x0.2” (5.0 x 5.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only, duty cycle=4 per minute maximum.
4. VF<3.5V for VBR <
_ 200V and VF<5.0V for VBR >
_ 201V.
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
23
SMBJ Series
SMBJ Series
RoHS
Transient Voltage Suppression Diodes
Surface Mount – 600W > SMBJ series
Electrical Characteristics
Part
Number
(Uni)
Part
Number
(Bi)
SMBJ5.0A
SMBJ6.0A
SMBJ6.5A
SMBJ7.0A
SMBJ7.5A
SMBJ8.0A
SMBJ8.5A
SMBJ9.0A
SMBJ10A
SMBJ11A
SMBJ12A
SMBJ13A
SMBJ14A
SMBJ15A
SMBJ16A
SMBJ17A
SMBJ18A
SMBJ20A
SMBJ22A
SMBJ24A
SMBJ26A
SMBJ28A
SMBJ30A
SMBJ33A
SMBJ36A
SMBJ40A
SMBJ43A
SMBJ45A
SMBJ48A
SMBJ51A
SMBJ54A
SMBJ58A
SMBJ60A
SMBJ64A
SMBJ70A
SMBJ75A
SMBJ78A
SMBJ85A
SMBJ90A
SMBJ100A
SMBJ110A
SMBJ120A
SMBJ130A
SMBJ150A
SMBJ160A
SMBJ170A
SMBJ180A
SMBJ200A
SMBJ220A
SMBJ250A
SMBJ300A
SMBJ350A
SMBJ400A
SMBJ440A
SMBJ5.0CA
SMBJ6.0CA
SMBJ6.5CA
SMBJ7.0CA
SMBJ7.5CA
SMBJ8.0CA
SMBJ8.5CA
SMBJ9.0CA
SMBJ10CA
SMBJ11CA
SMBJ12CA
SMBJ13CA
SMBJ14CA
SMBJ15CA
SMBJ16CA
SMBJ17CA
SMBJ18CA
SMBJ20CA
SMBJ22CA
SMBJ24CA
SMBJ26CA
SMBJ28CA
SMBJ30CA
SMBJ33CA
SMBJ36CA
SMBJ40CA
SMBJ43CA
SMBJ45CA
SMBJ48CA
SMBJ51CA
SMBJ54CA
SMBJ58CA
SMBJ60CA
SMBJ64CA
SMBJ70CA
SMBJ75CA
SMBJ78CA
SMBJ85CA
SMBJ90CA
SMBJ100CA
SMBJ110CA
SMBJ120CA
SMBJ130CA
SMBJ150CA
SMBJ160CA
SMBJ170CA
SMBJ180CA
SMBJ200CA
SMBJ220CA
SMBJ250CA
SMBJ300CA
SMBJ350CA
SMBJ400CA
SMBJ440CA
Marking
UNI
BI
KE
KG
KK
KM
KP
KR
KT
KV
KX
KZ
LE
LG
LK
LM
LP
LR
LT
LV
LX
LZ
ME
MG
MK
MM
MP
MR
MT
MV
MX
MZ
NE
NG
NK
NM
NP
NR
NT
NV
NX
NZ
PE
PG
PK
PM
PP
PR
PT
PV
PX
PZ
QE
QG
QK
QM
AE
AG
AK
AM
AP
AR
AT
AV
AX
AZ
BE
BG
BK
BM
BP
BR
BT
BV
BX
BZ
CE
CG
CK
CM
CP
CR
CT
CV
CX
CZ
DE
DG
DK
DM
DP
DR
DT
DV
DX
DZ
EE
EG
EK
EM
EP
ER
ET
EV
EX
EZ
FE
FG
FK
FM
Reverse
Stand off
Voltage VR
(Volts)
5.0
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
20.0
22.0
24.0
26.0
28.0
30.0
33.0
36.0
40.0
43.0
45.0
48.0
51.0
54.0
58.0
60.0
64.0
70.0
75.0
78.0
85.0
90.0
100.0
110.0
120.0
130.0
150.0
160.0
170.0
180.0
200.0
220.0
250.0
300.0
350.0
400.0
440.0
Breakdown
Voltage VBR
(Volts) @ IT
MIN
MAX
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.00
11.10
12.20
13.30
14.40
15.60
16.70
17.80
18.90
20.00
22.20
24.40
26.70
28.90
31.10
33.30
36.70
40.00
44.40
47.80
50.00
53.30
56.70
60.00
64.40
66.70
71.10
77.80
83.30
86.70
94.40
100.00
111.00
122.00
133.00
144.00
167.00
178.00
189.00
201.00
224.00
246.00
279.00
335.00
391.00
447.00
492.00
7.00
7.37
7.98
8.60
9.21
9.83
10.40
11.10
12.30
13.50
14.70
15.90
17.20
18.50
19.70
20.90
22.10
24.50
26.90
29.50
31.90
34.40
36.80
40.60
44.20
49.10
52.80
55.30
58.90
62.70
66.30
71.20
73.70
78.60
86.00
92.10
95.80
104.00
111.00
123.00
135.00
147.00
159.00
185.00
197.00
209.00
222.00
247.00
272.00
309.00
371.00
432.00
494.00
543.00
Maximum Maximum Maximum
Test
Peak
Reverse
Current Clamping
Voltage VC
Pulse
Leakage IR
IT
@ Ipp
Current Ipp
@ VR
(mA)
(V)
(A)
(μA)
10
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.2
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103.0
113.0
121.0
126.0
137.0
146.0
162.0
177.0
193.0
209.0
243.0
259.0
275.0
292.0
324.0
356.0
405.0
486.0
567.0
648.0
713.0
65.3
58.3
53.6
50.0
46.6
44.2
41.7
39.0
35.3
33.0
30.2
28.0
25.9
24.6
23.1
21.8
20.6
18.6
16.9
15.5
14.3
13.3
12.4
11.3
10.4
9.3
8.7
8.3
7.8
7.3
6.9
6.5
6.2
5.9
5.3
5.0
4.8
4.4
4.1
3.7
3.4
3.1
2.9
2.5
2.3
2.2
2.1
1.9
1.7
1.5
1.3
1.1
0.9
0.9
800
800
500
200
100
50
20
10
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Agency
Approval
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
For bidirectional type having VR of 10 volts and less, the IR limit is double.
For parts without A , the VBR is ± 10% and Vc is 5% higher than with A parts.
SMBJ Series
24
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Surface Mount – 600W > SMBJ series
Ratings and Characteristic Curves (T =25°C unless otherwise noted)
A
Figure 1 - Peak Pulse Power Rating
Figure 2 - Pulse Derating Curve
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage %
PPPM-Peak Pulse Power (kW)
100
10
1
0.2x0.2" (5.0x5.0mm)
Copper Pad Area
0.1
100
80
60
40
20
0
0.000001
0.00001
0.0001
0
0.001
td-Pulse Width (sec.)
75
100
125
150
175
Figure 4 - Typical Junction Capacitance
10000
150
tr=10μsec
TJ=25°C
Pulse Width(td) is deﬁned
as the point where the peak
current decays to 50% of IPPM
Peak Value
IPPM
100
Bi-directional V=0V
1000
Cj (pF)
IPPM- Peak Pulse Current, % IRSM
50
TA - Ambient Temperature (ºC)
Figure 3 - Pulse Waveform
Half Value
IPPM IPPM
( )
Uni-directional V=0V
Uni-directional @VR
100
2
Bi-directional @VR
50
0
10/1000μsec. Waveform
as deﬁned by R.E.A
10
Tj=25C
f=1.0MHz
Vsig=50mVp-p
td
1.0
0
2.0
3.0
1
1.0
4.0
t-Time (ms)
10.0
100.0
VBR - Reverse Breakdown Voltage (V)
1000.0
Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional Only
Figure 5 - Steady State Power Dissipation Derating Curve
6
120
IFSM - Peak Forward Surge Current (A)
PM(AV), Steady State Power Dissipation
(W)
25
5
4
3
2
1
0
0
25
50
75
100
125
150
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
80
60
40
20
0
175
1
TA - Ambient Temperature (ºC)
©2008 Littelfuse, Inc.
100
10
100
Number of Cycles at 60 Hz
25
SMBJ Series
Transient Voltage Suppression Diodes
Surface Mount – 600W > SMBJ series
Soldering Parameters
Reﬂow Condition
-FBEoGSFFBTTFNCMZ
tp
TP
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
oTFDT
Ramp-up
TL
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
3°C/second max
Reﬂow
- Temperature (TL) (Liquidus)
217°C
- Time (min to max) (ts)
oTFDPOET
Temperature (T)
Pre Heat
- Temperature Min (Ts(min))
Ts(max)
Ramp-down
Ts(min)
ts
Preheat
25˚C
t 25˚C to Peak
Peak Temperature (TP)
260
Time within 5°C of actual peak
Temperature (tp)
oTFDPOET
Ramp-down Rate
6°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
280°C
+0/-5
Time (t)
°C
Physical Speciﬁcations
Environmental Speciﬁcations
Weight
0.003 ounce, 0.093 grams
Temperature Cycle
JESD22-A104
Case
JEDEC DO214AA. Molded plastic body
over glass passivated junction
Pressure Cooker
JESD 22-A102
Polarity
Color band denotes cathode except
Bidirectional
High Temp. Storage
JESD22-A103
Terminal
Matte Tin-plated leads, Solderable per
JESD22-B102D
HTRB
JESD22-A108
Thermal Shock
JESD22-A106
SMBJ Series
Critical Zone
TL to TP
tL
26
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Surface Mount – 600W > SMBJ series
Dimensions
DO-214AA (SMB J-Bend)
Dimensions
C
B
H
D
F
E
G
K
J
L
Millimeters
Min
Max
A
0.077
B
0.160
Cathode Band
A
Inches
Min
Max
0.086
1.950
2.200
0.180
4.060
4.570
C
0.130
0.155
3.300
3.940
D
0.084
0.096
2.130
2.440
E
0.030
0.060
0.760
1.520
F
-
0.008
-
0.203
G
0.205
0.220
5.210
5.590
H
0.006
0.012
0.152
0.305
I
0.089
-
2.260
-
J
0.085
-
2.160
-
K
-
0.107
-
2.740
L
0.085
-
2.160
-
I
Part Numbering System
Part Marking System
Cathode Band
SMBJ XXX C A
XXX
5% VOLTAGE TOLERANCE
F
BI-DIRECTIONAL
VOLTAGE
SERIES
Littelfuse Logo
Marking Code
Packaging
Part number
Component
Package
SMBJxxxXX
DO-214AA
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Quantity
3000
Packaging
Option
5BQF3FFMoNNwUBQF
27
Packaging
Speciﬁcation
EIA STD RS-481
SMBJ Series
Transient Voltage Suppression Diodes
28
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Surface Mount – 600W > P6SMB series
P6SMB Series
Description
The P6SMB series is designed speciﬁcally to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Features
t 3P)4DPNQMJBOU
t 'PSTVSGBDFNPVOUFE
applications to optimize
board space
t -PXQSPmMFQBDLBHF
t #VJMUJOTUSBJOSFMJFG
t 5ZQJDBMNBYJNVN
temperature coefﬁcient
Δ VBR = 0.1% × VBR@25°C
t (MBTTQBTTJWBUFEDIJQ
junction
t 8QFBLQVMTFQPXFS
capability at 10×1000μs
waveform, repetition rate
(duty cycles):0.01%
t 'BTUSFTQPOTFUJNF
typically less than 1.0ps
from 0V to BV min
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Symbol
Value
Unit
Peak Pulse Power Dissipation at
TA=25ºC by 10x1000μs waveform
(Fig.1)(Note 1), (Note 2)
Parameter
PPPM
600
W
Power Dissipation on inﬁnite heat
sink at TA=50OC
PM(AV)
5.0
W
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave (Note 3)
IFSM
100
A
Maximum Instantaneous Forward
Voltage at 50A for Unidirectional
only (Note 4)
VF
3.5V/5.0
V
TJ , TSTG
-65 to 150
°C
Typical Thermal Resistance Junction
to Lead
RuJL
20
°C/W
Typical Thermal Resistance Junction
to Ambient
RuJA
100
°C/W
Operating Junction and Storage
Temperature Range
t &YDFMMFOUDMBNQJOH
capability
t -PXJODSFNFOUBMTVSHF
resistance
t 5ZQJDBM*R less than 1μA
above 12V
t )JHI5FNQFSBUVSF
soldering guaranteed:
260°C/40 seconds at
terminals
t 1MBTUJDQBDLBHFIBT
Underwriters Laboratory
Flammability 94V-O
t .BUUF5JO-FBEoGSFF
Plated
Applications
TVS devices are ideal for the protection of I/O Interfaces,
VCC bus and other vulnerable circuits used in Telecom,
Computer, Industrial and Consumer electronic applications.
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Mounted on copper pad area of 0.2x0.2” (5.0 x 5.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only,duty cycle=4 per minute maximum.
4. VF<3.5V for VBR <
_ 200V and VF<5.0V for VBR >
_ 201V.
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
29
P6SMB Series
P6SMB Series
RoHS
Transient Voltage Suppression Diodes
Surface Mount – 600W > P6SMB series
Electrical Characteristics
Part
Number
(Uni)
Part
Number
(Bi)
P6SMB6.8A
P6SMB7.5A
P6SMB8.2A
P6SMB9.1A
P6SMB10A
P6SMB11A
P6SMB12A
P6SMB13A
P6SMB15A
P6SMB16A
P6SMB18A
P6SMB20A
P6SMB22A
P6SMB24A
P6SMB27A
P6SMB30A
P6SMB33A
P6SMB36A
P6SMB39A
P6SMB43A
P6SMB47A
P6SMB51A
P6SMB56A
P6SMB62A
P6SMB68A
P6SMB75A
P6SMB82A
P6SMB91A
P6SMB100A
P6SMB110A
P6SMB120A
P6SMB130A
P6SMB150A
P6SMB160A
P6SMB170A
P6SMB180A
P6SMB200A
P6SMB220A
P6SMB250A
P6SMB300A
P6SMB350A
P6SMB400A
P6SMB440A
P6SMB480A
P6SMB510A
P6SMB530A
P6SMB540A
P6SMB550A
P6SMB6.8CA
P6SMB7.5CA
P6SMB8.2CA
P6SMB9.1CA
P6SMB10CA
P6SMB11CA
P6SMB12CA
P6SMB13CA
P6SMB15CA
P6SMB16CA
P6SMB18CA
P6SMB20CA
P6SMB22CA
P6SMB24CA
P6SMB27CA
P6SMB30CA
P6SMB33CA
P6SMB36CA
P6SMB39CA
P6SMB43CA
P6SMB47CA
P6SMB51CA
P6SMB56CA
P6SMB62CA
P6SMB68CA
P6SMB75CA
P6SMB82CA
P6SMB91CA
P6SMB100CA
P6SMB110CA
P6SMB120CA
P6SMB130CA
P6SMB150CA
P6SMB160CA
P6SMB170CA
P6SMB180CA
P6SMB200CA
P6SMB220CA
P6SMB250CA
P6SMB300CA
P6SMB350CA
P6SMB400CA
P6SMB440CA
P6SMB480CA
P6SMB510CA
P6SMB530CA
P6SMB540CA
P6SMB550CA
Marking
UNI
BI
6V8A
7V5A
8V2A
9V1A
10A
11A
12A
13A
15A
16A
18A
20A
22A
24A
27A
30A
33A
36A
39A
43A
47A
51A
56A
62A
68A
75A
82A
91A
100A
110A
120A
130A
150A
160A
170A
180A
200A
220A
250A
300A
350A
400A
440A
480A
510A
530A
540A
550A
6V8C
7V5C
8V2C
9V1C
10C
11C
12C
13C
15C
16C
18C
20C
22C
24C
27C
30C
33C
36C
39C
43C
47C
51C
56C
62C
68C
75C
82C
91C
100C
110C
120C
130C
150C
160C
170C
180C
200C
220C
250C
300C
350C
400C
440C
480C
510C
530C
540C
550C
Reverse
Stand off
Voltage VR
(Volts)
5.80
6.40
7.02
7.78
8.55
9.40
10.20
11.10
12.80
13.60
15.30
17.10
18.80
20.50
23.10
25.60
28.20
30.80
33.30
36.80
40.20
43.60
47.80
53.00
58.10
64.10
70.10
77.80
85.50
94.00
102.00
111.00
128.00
136.00
145.00
154.00
171.00
185.00
214.00
256.00
300.00
342.00
376.00
408.00
434.00
477.00
486.00
495.00
Breakdown
Voltage VBR
(Volts) @ IT
MIN
MAX
6.45
7.13
7.79
8.65
9.50
10.50
11.40
12.40
14.30
15.20
17.10
19.00
20.90
22.80
25.70
28.50
31.40
34.20
37.10
40.90
44.70
48.50
53.20
58.90
64.60
71.30
77.90
86.50
95.00
105.00
114.00
124.00
143.00
152.00
162.00
171.00
190.00
209.00
237.00
285.00
332.00
380.00
418.00
456.00
485.00
503.50
513.00
522.50
7.14
7.88
8.61
9.55
10.50
11.60
12.60
13.70
15.80
16.80
18.90
21.00
23.10
25.20
28.40
31.50
34.70
37.80
41.00
45.20
49.40
53.60
58.80
65.10
71.40
78.80
86.10
95.50
105.00
116.00
126.00
137.00
158.00
168.00
179.00
189.00
210.00
231.00
263.00
315.00
368.00
420.00
462.00
504.00
535.00
556.50
567.00
577.50
Maximum Maximum Maximum
Test
Agency
Peak
Reverse
Current Clamping
Approval
Voltage VC
Pulse
Leakage IR
IT
@ Ipp
Current Ipp
@ VR
(mA)
(V)
(A)
(μA)
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10.5
11.3
12.1
13.4
14.5
15.6
16.7
18.2
21.2
22.5
25.5
27.7
30.6
33.2
37.5
41.4
45.7
49.9
53.9
59.3
64.8
70.1
77.0
85.0
92.0
103.0
113.0
125.0
137.0
152.0
165.0
179.0
207.0
219.0
234.0
246.0
274.0
328.0
344.0
414.0
482.0
548.0
602.0
658.0
698.0
725.0
740.0
760.0
58.1
54.0
50.4
45.5
42.1
39.1
36.5
33.5
28.8
27.1
24.2
22.0
19.9
18.4
16.3
14.7
13.3
12.2
11.3
10.3
9.4
8.7
7.9
7.2
6.6
5.9
5.4
4.9
4.5
4.0
3.7
3.4
2.9
2.8
2.6
2.5
2.2
1.9
1.8
1.5
1.3
1.1
1.0
0.9
0.9
0.8
0.8
0.8
1000
500
200
50
10
5
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
For bidirectional type having VR of 10 volts and less, the IR limit is double.
The avaliable parts are “A” type only, the parts without A (VBR is ± 10%) is not avaliable.
P6SMB Series
30
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Surface Mount – 600W > P6SMB series
Ratings and Characteristic Curves
(TA=25°C unless otherwise noted)
Figure 1 - Peak Pulse Power Rating
Figure 2 - Pulse Derating Curve
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage %
PPPM-Peak Pulse Power (kW)
100
10
1
0.2x0.2" (5.0x5.0mm)
Copper Pad Area
0.1
100
75
50
25
0
0.000001
0.00001
0.0001
0.001
0
td-Pulse Width (sec.)
75
100
125
150
175
Figure 4 - Typical Junction Capacitance
10000
150
tr=10μsec
TJ=25°C
Pulse Width(td) is deﬁned
as the point where the peak
current decays to 50% of IPPM
Peak Value
IPPM
100
Bi-directional V=0V
1000
Cj (pF)
IPPM- Peak Pulse Current, % IRSM
50
TA - Ambient Temperature (ºC)
Figure 3 - Pulse Waveform
Half Value
IPPM IPPM
( )
Uni-directional V=0V
Uni-directional @VR
100
2
Bi-directional @VR
50
0
10/1000μsec. Waveform
as deﬁned by R.E.A
10
Tj=25C
f=1.0MHz
Vsig=50mVp-p
td
1.0
0
2.0
3.0
1
1.0
4.0
t-Time (ms)
10.0
100.0
1000.0
VBR - Reverse Breakdown Voltage (V)
Figure 5 - Steady State Power Dissipation Derating
Curve
Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional Only
6
120
IFSM - Peak Forward Surge Current (A)
PM(AV), Steady State Power Dissipation (W)
25
5
4
3
2
1
0
100
80
60
40
20
0
0
25
50
75
100
125
150
1
175
TA - Ambient Temperature (ºC)
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
10
100
Number of Cycles at 60 Hz
31
P6SMB Series
Transient Voltage Suppression Diodes
Surface Mount – 600W > P6SMB series
Soldering Parameters
Reﬂow Condition
-FBEoGSFFBTTFNCMZ
tp
TP
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
oTFDT
Ramp-up
TL
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
3°C/second max
Reﬂow
- Temperature (TL) (Liquidus)
217°C
- Time (min to max) (ts)
oTFDPOET
Temperature (T)
Pre Heat
- Temperature Min (Ts(min))
Ts(max)
Ramp-down
Ts(min)
ts
Preheat
25˚C
t 25˚C to Peak
Peak Temperature (TP)
260
Time within 5°C of actual peak
Temperature (tp)
oTFDPOET
Ramp-down Rate
6°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
280°C
+0/-5
Time (t)
°C
Physical Speciﬁcations
Environmental Speciﬁcations
Weight
0.003 ounce, 0.093 grams
Temperature Cycle
JESD22-A104
Case
JEDEC DO214AA. Molded plastic body
over glass passivated junction
Pressure Cooker
JESD 22-A102
Polarity
Color band denotes cathode except
Bidirectional.
High Temp. Storage
JESD22-A103
Terminal
Matte Tin-plated leads, Solderable per
JESD22-B102D
HTRB
JESD22-A108
Thermal Shock
JESD22-A106
P6SMB Series
Critical Zone
TL to TP
tL
32
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Surface Mount – 600W > P6SMB series
Dimensions
DO-214AA (SMB J-Bend)
Dimensions
C
B
H
D
F
E
G
K
J
L
Millimeters
Min
Max
A
0.077
B
0.160
Cathode Band
A
Inches
Min
Max
0.086
1.950
2.200
0.180
4.060
4.570
C
0.130
0.155
3.300
3.940
D
0.084
0.096
2.130
2.440
E
0.030
0.060
0.760
1.520
F
-
0.008
-
0.203
G
0.205
0.220
5.210
5.590
H
0.006
0.012
0.152
0.305
I
0.089
-
2.260
-
J
0.085
-
2.160
-
K
-
0.107
-
2.740
L
0.085
-
2.160
-
I
Part Numbering System
Part Marking System
Cathode Band
P6SMB XXX C A
XXX
5% VOLTAGE TOLERANCE
F
BI-DIRECTIONAL
VOLTAGE
SERIES
Littelfuse Logo
Marking Code
Packaging
Part number
Component
Package
P6SMBxxxXX
DO-214AA
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Quantity
3000
Packaging
Option
5BQF3FFMoNNwUBQF
33
Packaging
Speciﬁcation
EIA STD RS-481
P6SMB Series
Transient Voltage Suppression Diodes
34
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Surface Mount – 1000W > 1KSMB series
1KSMB Series
Description
The 1KSMB series is designed speciﬁcally to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Features
t 3P)4DPNQMJBOU
t 'PSTVSGBDFNPVOUFE
applications to optimize
board space
t -PXQSPmMFQBDLBHF
t #VJMUJOTUSBJOSFMJFG
t 5ZQJDBMNBYJNVN
temperature coefﬁcient
Δ VBR = 0.1% × VBR@25°C
t (MBTTQBTTJWBUFEDIJQ
junction
t 8QFBLQVMTFQPXFS
capability at 10×1000μs
waveform, repetition rate
(duty cycles):0.01%
t 'BTUSFTQPOTFUJNF
typically less than 1.0ps
from 0V to BV min
t &YDFMMFOUDMBNQJOH
capability
t -PXJODSFNFOUBMTVSHF
resistance
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E128662
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Symbol
Value
Unit
Peak Pulse Power Dissipation at
TA=25ºC by 10x1000μs waveform
(Fig.1)(Note 1), (Note 2)
Parameter
PPPM
1000
W
Power Dissipation on inﬁnite heat
sink at TA=50OC
PM(AV)
5.0
W
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave (Note 3)
IFSM
100
A
Maximum Instantaneous Forward
Voltage at 50A for Unidirectional
only (Note 4)
VF
3.5V/5.0
V
TJ , TSTG
-65 to 150
°C
Typical Thermal Resistance Junction
to Lead
RuJL
20
°C/W
Typical Thermal Resistance Junction
to Ambient
RuJA
100
°C/W
Operating Junction and Storage
Temperature Range
t 5ZQJDBM*R less than 1μA
above 12V
t )JHI5FNQFSBUVSF
soldering guaranteed:
260°C/40 seconds at
terminals
t 1MBTUJDQBDLBHFIBT
Underwriters Laboratory
Flammability 94V-O
t .BUUF5JO-FBEoGSFF
Plated
t "WBJMBCMFJOCSFBLEPXO
Voltage from 6.8V
to 160V specially
designed for automotive
applications
t 0GGFST)JHI4VSHFSBUJOH
in compact package:
bridges the gap between
600W and 1.5KW
Applications
TVS devices are ideal for the protection of I/O Interfaces,
VCC bus and other vulnerable circuits used in Telecom,
Computer, Industrial and Consumer electronic applications.
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Mounted on copper pad area of 0.2x0.2” (5.0 x 5.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only, duty cycle=4 per minute maximum.
4. VF<3.5V for VBR <
_ 50V and VF<5.0V for VBR >
_ 51V.
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
35
1KSMB Series
1KSMB Series
RoHS
Transient Voltage Suppression Diodes
Surface Mount – 1000W > 1KSMB series
Electrical Characteristics
Part
Number
(Uni)
Part
Number
(Bi)
1KSMB6.8A
1KSMB7.5A
1KSMB8.2A
1KSMB9.1A
1KSMB10A
1KSMB11A
1KSMB12A
1KSMB13A
1KSMB15A
1KSMB16A
1KSMB18A
1KSMB20A
1KSMB22A
1KSMB24A
1KSMB27A
1KSMB30A
1KSMB33A
1KSMB36A
1KSMB39A
1KSMB43A
1KSMB47A
1KSMB51A
1KSMB56A
1KSMB62A
1KSMB68A
1KSMB75A
1KSMB82A
1KSMB91A
1KSMB100A
1KSMB110A
1KSMB120A
1KSMB130A
1KSMB150A
1KSMB160A
1KSMB6.8CA
1KSMB7.5CA
1KSMB8.2CA
1KSMB9.1CA
1KSMB10CA
1KSMB11CA
1KSMB12CA
1KSMB13CA
1KSMB15CA
1KSMB16CA
1KSMB18CA
1KSMB20CA
1KSMB22CA
1KSMB24CA
1KSMB27CA
1KSMB30CA
1KSMB33CA
1KSMB36CA
1KSMB39CA
1KSMB43CA
1KSMB47CA
1KSMB51CA
1KSMB56CA
1KSMB62CA
1KSMB68CA
1KSMB75CA
1KSMB82CA
1KSMB91CA
1KSMB100CA
1KSMB110CA
1KSMB120CA
1KSMB130CA
1KSMB150CA
1KSMB160CA
Marking
UNI
BI
A10A
A10B
A10C
A10D
A10E
A10F
A10G
A10H
A10I
A10J
A10K
A10L
A10M
A10N
A10O
A10P
A10Q
A10R
A10S
A10T
A10U
A10V
A10W
A10X
A10Y
A10Z
B10A
B10B
B10C
B10D
B10E
B10F
B10G
B10H
N10A
N10B
N10C
N10D
N10E
N10F
N10G
N10H
N10I
N10J
N10K
N10L
N10M
N10N
N10O
N10P
N10Q
N10R
N10S
N10T
N10U
N10V
N10W
N10X
N10Y
N10Z
O10A
O10B
O10C
O10D
O10E
O10F
O10G
O10H
Reverse
Stand off
Voltage VR
(Volts)
5.80
6.40
7.02
7.78
8.55
9.40
10.20
11.10
12.80
13.60
15.30
17.10
18.80
20.50
23.10
25.60
28.20
30.80
33.30
36.80
40.20
43.60
47.80
53.00
58.10
64.10
70.10
77.80
85.50
94.00
102.00
111.00
128.00
136.00
Breakdown
Voltage VBR
(Volts) @ IT
MIN
MAX
6.45
7.13
7.79
8.65
9.50
10.50
11.40
12.40
14.30
15.20
17.10
19.00
20.90
22.80
25.70
28.50
31.40
34.20
37.10
40.90
44.70
48.50
53.20
58.90
64.60
71.30
77.90
86.50
95.00
105.00
114.00
124.00
143.00
152.00
7.14
7.88
8.61
9.55
10.50
11.60
12.60
13.70
15.80
16.80
18.90
21.00
23.10
25.20
28.40
31.50
34.70
37.80
41.00
45.20
49.40
53.60
58.80
65.10
71.40
78.80
86.10
95.50
105.00
116.00
126.00
137.00
158.00
168.00
Maximum Maximum Maximum
Test
Agency
Peak
Reverse
Current Clamping
Approval
Voltage VC
Pulse
Leakage IR
IT
@ Ipp
Current Ipp
@ VR
(mA)
(V)
(A)
(μA)
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10.5
11.3
12.1
13.4
14.5
15.6
16.7
18.2
21.2
22.5
25.5
27.7
30.6
33.2
37.5
41.4
45.7
49.9
53.9
59.3
64.8
70.1
77.0
85.0
92.0
103.0
113.0
125.0
137.0
152.0
165.0
179.0
207.0
219.0
95.2
88.5
82.6
74.6
69.0
64.1
59.9
54.9
47.2
44.4
39.2
36.1
32.7
30.1
26.7
24.2
21.9
20.0
18.6
16.9
15.4
14.3
13.0
11.8
10.9
9.7
8.8
8.0
7.3
6.6
6.1
5.6
4.8
4.6
900
400
180
45
8
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
For bidirectional type having VR of 10 volts and less, the IR limit is double.
The avaliable parts are “A” type only, the parts without A (VBR is ± 10%) is not avaliable.
1KSMB Series
36
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Surface Mount – 1000W > 1KSMB series
Ratings and Characteristic Curves (T =25°C unless otherwise noted)
A
Figure 1 - Peak Pulse Power Rating Curve
Figure 2 - Pulse Derating Curve
100
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage %
PPPM-Peak Pulse Power (kW)
100
10
0.2x0.2" (5.0x5.0mm)
Copper Pad Area
1
80
60
40
20
0
0.000001
0.00001
0.0001
0
0.001
25
Figure 3 - Pulse Waveform
75
100
125
150
175
Figure 4 - Typical Junction Capacitance
10000
150
tr=10μsec
Peak Value
IPPM
100
Bi-directional V=0V
TJ=25°C
Pulse Width(td) is deﬁned
as the point where the peak
current decays to 50% of IPPM
Uni-directional V=0V
1000
Uni-directional @VR
Cj (pF)
IPPM- Peak Pulse Current, % IRSM
50
TA-Ambient temperature (ºC)
td-Pulse Width (sec.)
Half Value
IPPM IPPM
( )
2
100
Bi-directional @VR
50
10/1000μsec. Waveform
as deﬁned by R.E.A
10
Tj=25C
f=1.0MHz
Vsig=50mVp-p
td
0
1.0
0
2.0
3.0
1
1.0
4.0
t-Time (ms)
Figure 5 - Steady State Power Dissipation Derating
Curve
100.0
1000.0
Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional Only
6
120
IFSM - Peak Forward Surge Current
(A)
PM(AV), Steady State Power Dissipation
(W)
10.0
VBR - Reverse Breakdown Voltage (V)
5
4
3
2
1
0
100
80
60
40
20
0
0
25
50
75
100
125
150
1
175
TA - Ambient Temperature(ºC)
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
10
100
Number of Cycles at 60 Hz
37
1KSMB Series
Transient Voltage Suppression Diodes
Surface Mount – 1000W > 1KSMB series
Soldering Parameters
Reﬂow Condition
-FBEoGSFFBTTFNCMZ
tp
TP
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
oTFDT
Ramp-up
TL
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
3°C/second max
Reﬂow
- Temperature (TL) (Liquidus)
217°C
- Time (min to max) (ts)
oTFDPOET
Temperature (T)
Pre Heat
- Temperature Min (Ts(min))
Ts(max)
Ramp-down
Ts(min)
ts
Preheat
25˚C
t 25˚C to Peak
Peak Temperature (TP)
260
Time within 5°C of actual peak
Temperature (tp)
oTFDPOET
Ramp-down Rate
6°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
280°C
+0/-5
Time (t)
°C
Physical Speciﬁcations
Environmental Speciﬁcations
Weight
0.003 ounce, 0.093 grams
Temperature Cycle
JESD22-A104
Case
JEDEC DO214AA. Molded plastic body
over glass passivated junction
Pressure Cooker
JESD 22-A102
Polarity
Color band denotes cathode except
Bidirectional.
High Temp. Storage
JESD22-A103
Terminal
Matte Tin-plated leads, Solderable per
JESD22-B102D
HTRB
JESD22-A108
Thermal Shock
JESD22-A106
1KSMB Series
Critical Zone
TL to TP
tL
38
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Surface Mount – 1000W > 1KSMB series
Dimensions
DO-214AA (SMB J-Bend)
Dimensions
C
B
H
D
F
E
G
K
J
L
Millimeters
Min
Max
A
0.077
B
0.160
Cathode Band
A
Inches
Min
Max
0.086
1.950
2.200
0.180
4.060
4.570
C
0.130
0.155
3.300
3.940
D
0.084
0.096
2.130
2.440
E
0.030
0.060
0.760
1.520
F
-
0.008
-
0.203
G
0.205
0.220
5.210
5.590
H
0.006
0.012
0.152
0.305
I
0.089
-
2.260
-
J
0.085
-
2.160
-
K
-
0.107
-
2.740
L
0.085
-
2.160
-
I
Part Numbering System
Part Marking System
1KSMB XXX C A
Cathode Band
XXX
5% VOLTAGE TOLERANCE
BI-DIRECTIONAL
F
VOLTAGE
SERIES
Littelfuse Logo
Marking Code
Packaging
Part number
Component
Package
1KSMBxxxXX
DO-214AA
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Quantity
3000
Packaging
Option
5BQF3FFMoNNwUBQF
39
Packaging
Speciﬁcation
EIA STD RS-481
1KSMB Series
Transient Voltage Suppression Diodes
40
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Surface Mount – 1500W > SMCJ series
SMCJ Series
Description
The SMCJ series is designed speciﬁcally to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Features
t 3P)4DPNQMJBOU
t 'PSTVSGBDFNPVOUFE
applications to optimize
board space
t -PXQSPmMFQBDLBHF
t #VJMUJOTUSBJOSFMJFG
t 5ZQJDBMNBYJNVN
temperature coefﬁcient
Δ VBR = 0.1%×V BR @25°C
t (MBTTQBTTJWBUFEDIJQ
junction
t 8QFBLQVMTFQPXFS
capability at 10×1000μs
waveform, repetition rate
(duty cycles):0.01%
t 'BTUSFTQPOTFUJNF
typically less than 1.0ps
from 0V to BV min
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Symbol
Value
Unit
Peak Pulse Power Dissipation at
TA=25ºC by 10x1000μs waveform
(Fig.1)(Note 1), (Note 2)
Parameter
PPPM
1500
W
Power Dissipation on inﬁnite heat
sink at TA=50OC
PM(AV)
6.5
W
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave (Note 3)
IFSM
200
A
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
only (Note 4)
VF
3.5/5.0
V
TJ , TSTG
-65 to 150
°C
Typical Thermal Resistance Junction
to Lead
RuJL
15
°C/W
Typical Thermal Resistance Junction
to Ambient
RuJA
75
°C/W
Operating Junction and Storage
Temperature Range
t &YDFMMFOUDMBNQJOH
capability
t -PXJODSFNFOUBMTVSHF
resistance
t 5ZQJDBM*R less than 1μA
above 12V
t )JHI5FNQFSBUVSF
soldering guaranteed:
260°C/40 seconds at
terminals
t 1MBTUJDQBDLBHFIBT
Underwriters Laboratory
Flammability 94V-O
t .BUUF5JO-FBEoGSFF
Plated
Applications
TVS devices are ideal for the protection of I/O Interfaces,
VCC bus and other vulnerable circuits used in Telecom,
Computer, Industrial and Consumer electronic applications.
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only, duty cycle=4 per minute maximum.
4. VF<3.5V for VBR <
__ 200V and VF<5.0V for VBR >
_ 201V.
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
41
SMCJ Series
SMCJ Series
RoHS
Transient Voltage Suppression Diodes
Surface Mount – 1500W > SMCJ series
Electrical Characteristics
Part
Number
(Uni)
Part
Number
(Bi)
SMCJ5.0A
SMCJ6.0A
SMCJ6.5A
SMCJ7.0A
SMCJ7.5A
SMCJ8.0A
SMCJ8.5A
SMCJ9.0A
SMCJ10A
SMCJ11A
SMCJ12A
SMCJ13A
SMCJ14A
SMCJ15A
SMCJ16A
SMCJ17A
SMCJ18A
SMCJ20A
SMCJ22A
SMCJ24A
SMCJ26A
SMCJ28A
SMCJ30A
SMCJ33A
SMCJ36A
SMCJ40A
SMCJ43A
SMCJ45A
SMCJ48A
SMCJ51A
SMCJ54A
SMCJ58A
SMCJ60A
SMCJ64A
SMCJ70A
SMCJ75A
SMCJ78A
SMCJ85A
SMCJ90A
SMCJ100A
SMCJ110A
SMCJ120A
SMCJ130A
SMCJ150A
SMCJ160A
SMCJ170A
SMCJ180A
SMCJ200A
SMCJ220A
SMCJ250A
SMCJ300A
SMCJ350A
SMCJ400A
SMCJ440A
SMCJ5.0CA
SMCJ6.0CA
SMCJ6.5CA
SMCJ7.0CA
SMCJ7.5CA
SMCJ8.0CA
SMCJ8.5CA
SMCJ9.0CA
SMCJ10CA
SMCJ11CA
SMCJ12CA
SMCJ13CA
SMCJ14CA
SMCJ15CA
SMCJ16CA
SMCJ17CA
SMCJ18CA
SMCJ20CA
SMCJ22CA
SMCJ24CA
SMCJ26CA
SMCJ28CA
SMCJ30CA
SMCJ33CA
SMCJ36CA
SMCJ40CA
SMCJ43CA
SMCJ45CA
SMCJ48CA
SMCJ51CA
SMCJ54CA
SMCJ58CA
SMCJ60CA
SMCJ64CA
SMCJ70CA
SMCJ75CA
SMCJ78CA
SMCJ85CA
SMCJ90CA
SMCJ100CA
SMCJ110CA
SMCJ120CA
SMCJ130CA
SMCJ150CA
SMCJ160CA
SMCJ170CA
SMCJ180CA
SMCJ200CA
SMCJ220CA
SMCJ250CA
SMCJ300CA
SMCJ350CA
SMCJ400CA
SMCJ440CA
UNI
BI
Reverse
Stand off
Voltage
VR
(Volts)
GDE
GDG
GDK
GDM
GDP
GDR
GDT
GDV
GDX
GDZ
GEE
GEG
GEK
GEM
GEP
GER
GET
GEV
GEX
GEZ
GFE
GFG
GFK
GFM
GFP
GFR
GFT
GFV
GFX
GFZ
GGE
GGG
GGK
GGM
GGP
GGR
GGT
GGV
GGX
GGZ
GHE
GHG
GHK
GHM
GHP
GHR
GHT
GHV
GHX
GHZ
GJE
GJG
GJK
GJM
BDE
BDG
BDK
BDM
BDP
BDR
BDT
BDV
BDX
BDZ
BEE
BEG
BEK
BEM
BEP
BER
BET
BEV
BEX
BEZ
BFE
BFG
BFK
BFM
BFP
BFR
BFT
BFV
BFX
BFZ
BGE
BGG
BGK
BGM
BGP
BGR
BGT
BGV
BGX
BGZ
BHE
BHG
BHK
BHM
BHP
BHR
BHT
BHV
BHX
BHZ
BJE
BJG
BJK
BJM
5.0
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
20.0
22.0
24.0
26.0
28.0
30.0
33.0
36.0
40.0
43.0
45.0
48.0
51.0
54.0
58.0
60.0
64.0
70.0
75.0
78.0
85.0
90.0
100.0
110.0
120.0
130.0
150.0
160.0
170.0
180.0
200.0
220.0
250.0
300.0
350.0
400.0
440.0
Marking
Breakdown
Voltage VBR
(Volts) @ IT
MIN
MAX
Test
Current
IT
(mA)
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.00
11.10
12.20
13.30
14.40
15.60
16.70
17.80
18.90
20.00
22.20
24.40
26.70
28.90
31.10
33.30
36.70
40.00
44.40
47.80
50.00
53.30
56.70
60.00
64.40
66.70
71.10
77.80
83.30
86.70
94.40
100.00
111.00
122.00
133.00
144.00
167.00
178.00
189.00
201.00
224.00
246.00
279.00
335.00
391.00
447.00
492.00
7.00
7.37
7.98
8.60
9.21
9.83
10.40
11.10
12.30
13.50
14.70
15.90
17.20
18.50
19.70
20.90
22.10
24.50
26.90
29.50
31.90
34.40
36.80
40.60
44.20
49.10
52.80
55.30
58.90
62.70
66.30
71.20
73.70
78.60
86.00
92.10
95.80
104.00
111.00
123.00
135.00
147.00
159.00
185.00
197.00
209.00
222.00
247.00
272.00
309.00
371.00
432.00
494.00
543.00
10
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Maximum Maximum Maximum
Agency
Peak
Reverse
Clamping
Approval
Pulse
Leakage IR
Voltage VC
@ Ipp
Current Ipp
@ VR
(V)
(A)
(μA)
9.2
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103.0
113.0
121.0
126.0
137.0
146.0
162.0
177.0
193.0
209.0
243.0
259.0
275.0
292.0
324.0
356.0
405.0
486.0
567.0
648.0
713.0
163.0
145.7
134.0
125.0
116.3
110.3
104.2
97.4
88.3
82.5
75.4
69.8
64.7
61.5
57.7
54.4
51.4
46.3
42.3
38.6
35.7
33.1
31.0
28.2
25.9
23.3
21.7
20.6
19.4
18.2
17.3
16.1
15.5
14.6
13.3
12.4
11.9
11.0
10.3
9.3
8.5
7.8
7.2
6.2
5.8
5.5
5.1
4.6
4.2
3.7
3.1
2.6
2.3
2.1
800
800
500
200
100
50
20
10
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
For bidirectional type having VR of 10 volts and less, the IR limit is double.
For parts without A , the VBR is ± 10% and VC is 5% higher than with A parts.
SMCJ Series
42
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Surface Mount – 1500W > SMCJ series
Ratings and Characteristic Curves (T =25°C unless otherwise noted)
A
Figure 1 - Peak Pulse Power Rating
Figure 2 - Pulse Derating Curve
200
IPSM-Peak Forward Surge Current (A)
PPPM-Peak Pulse Power (kW)
100
10
0.31x0.31" (8.0x8.0mm)
Copper Pad Area
1
0.000001
0.00001
0.0001
100
8.3 Single Half Sine-Wave
(JEDEC Method)
Undirectional Only
TJ=TJ MAX
10
1
0.001
td-Pulse Width (sec.)
Figure 3 - Pulse Waveform
TJ=25°C
Pulse Width(td) is deﬁned
as the point where the peak
current decays to 50% of IPPM
Peak Value
IPPM
100
Bi-directional V=0V
10000
Uni-directional V=0V
Cj (pF)
IPPM- Peak Pulse Current, % IRSM
100000
tr=10μsec
Half Value
IPPM IPPM
( )
2
50
1000
Uni-directional @VR
100
10/1000μsec. Waveform
as deﬁned by R.E.A
Bi-directional @VR
10
td
1.0
0
2.0
3.0
Tj=25C
f=1.0MHz
Vsig=50mVp-p
1
1.0
4.0
10.0
100.0
1000.0
VBR - Reverse Breakdown Voltage (V)
t-Time (ms)
Figure 5 - Steady State Power Dissipation Derating
Curve
Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional Only
6.5
6
5.5
5
4.5
4
3.5
3
2.5
2
1.5
1
0.5
0
IFSM - Peak Forward Surge Current (A)
PM(AV), Steady Sate Power Dissipation
(W)
100
Figure 4 - Typical Junction Capacitance
150
0
10
Number of Cycles at 60Hz
200
180
160
140
120
100
80
60
40
20
0
0
25
50
75
100
125
150
TA - Ambient Temperature (ºC)
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
1
175
10
100
Number of Cycles at 60 Hz
43
SMCJ Series
Transient Voltage Suppression Diodes
Surface Mount – 1500W > SMCJ series
Soldering Parameters
Reﬂow Condition
-FBEoGSFFBTTFNCMZ
tp
TP
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
oTFDT
Ramp-up
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
3°C/second max
Reﬂow
- Temperature (TL) (Liquidus)
217°C
- Time (min to max) (ts)
oTFDPOET
tL
Ts(max)
Ramp-down
Ts(min)
ts
Preheat
25˚C
Peak Temperature (TP)
260
Time within 5°C of actual peak
Temperature (tp)
oTFDPOET
Ramp-down Rate
6°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
280°C
+0/-5
Critical Zone
TL to TP
TL
Temperature (T)
Pre Heat
t 25˚C to Peak
Time (t)
°C
Physical Speciﬁcations
Environmental Speciﬁcations
Weight
0.007 ounce, 0.21 grams
Temperature Cycle
JESD22-A104
Case
JEDEC DO214AB. Molded plastic body
over glass passivated junction
Pressure Cooker
JESD 22-A102
Polarity
Color band denotes positive end
(cathode) except Bidirectional.
High Temp. Storage
JESD22-A103
Terminal
Matte Tin-plated leads, Solderable per
JESD22-B102D
HTRB
JESD22-A108
Thermal Shock
JESD22-A106
Dimensions
DO-214AB (SMC J-Bend)
Dimensions
Cathode Band
C
A
B
H
D
F
E
G
J
K
L
I
SMCJ Series
44
Inches
Min
Millimeters
Max
Min
Max
A
0.114
0.126
2.900
3.200
B
0.260
0.280
6.600
7.110
C
0.220
0.245
5.590
6.220
D
0.079
0.103
2.060
2.620
E
0.030
0.060
0.760
1.520
F
-
0.008
-
0.203
G
0.305
0.320
7.750
8.130
H
0.006
0.012
0.152
0.305
I
0.129
-
3.300
-
J
0.094
-
2.400
-
K
-
0.165
-
4.200
L
0.094
-
2.400
-
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Surface Mount – 1500W > SMCJ series
Part Numbering System
Part Marking System
SMCJ XXX C A
Cathode Band
XXX
5% VOLTAGE TOLERANCE
BI-DIRECTIONAL
F
VOLTAGE
SERIES
Littelfuse Logo
Marking Code
Packaging
Part number
Component
Package
SMCJxxxXX
DO-214AB
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Quantity
3000
Packaging
Option
5BQF3FFMoNNwUBQF
45
Packaging
Speciﬁcation
EIA STD RS-481
SMCJ Series
Transient Voltage Suppression Diodes
46
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Surface Mount – 1500W > 1.5SMC series
1.5SMC Series
Description
The 1.5SMC series is designed speciﬁcally to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Features
t 3P)4DPNQMJBOU
t 'PSTVSGBDFNPVOUFE
applications to optimize
board space
t -PXQSPmMFQBDLBHF
t #VJMUJOTUSBJOSFMJFG
t 5ZQJDBMNBYJNVN
temperature coefﬁcient
Δ VBR = 0.1% × VBR@25°C
t (MBTTQBTTJWBUFEDIJQ
junction
t 8QFBLQVMTFQPXFS
capability at 10×1000μs
waveform, repetition rate
(duty cycles):0.01%
t 'BTUSFTQPOTFUJNF
typically less than 1.0ps
from 0V to BV min
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Symbol
Value
Unit
Peak Pulse Power Dissipation at
TA=25ºC by 10x1000μs waveform
(Fig.1)(Note 1), (Note 2)
Parameter
PPPM
1500
W
Power Dissipation on inﬁnite heat
sink at TA=50OC
PM(AV)
6.5
W
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave (Note 3)
IFSM
200
A
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
only (Note 4)
VF
3.5/5.0
V
TJ , TSTG
-65 to 150
°C
Typical Thermal Resistance Junction
to Lead
RuJL
15
°C/W
Typical Thermal Resistance Junction
to Ambient
RuJA
75
°C/W
Operating Junction and Storage
Temperature Range
t &YDFMMFOUDMBNQJOH
capability
t -PXJODSFNFOUBMTVSHF
resistance
t 5ZQJDBM*R less than 1μA
above 13V
t )JHI5FNQFSBUVSF
soldering guaranteed:
260°C/40 seconds at
terminals
t 1MBTUJDQBDLBHFIBT
Underwriters Laboratory
Flammability 94V-O
t .BUUF5JO-FBEoGSFF
Plated
Applications
TVS devices are ideal for the protection of I/O Interfaces,
VCC bus and other vulnerable circuits used in Telecom,
Computer, Industrial and Consumer electronic applications.
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only, duty cycle=4 per minute maximum.
4. VF<3.5V for VBR <
_ 200V and VF<5.0V for VBR >
_ 201V.
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
47
1.5SMC Series
1.5SMC Series
RoHS
Transient Voltage Suppression Diodes
Surface Mount – 1500W > 1.5SMC series
Electrical Characteristics
Part
Number
(Uni)
Part
Number
(Bi)
1.5SMC6.8A
1.5SMC7.5A
1.5SMC8.2A
1.5SMC9.1A
1.5SMC10A
1.5SMC11A
1.5SMC12A
1.5SMC13A
1.5SMC15A
1.5SMC16A
1.5SMC18A
1.5SMC20A
1.5SMC22A
1.5SMC24A
1.5SMC27A
1.5SMC30A
1.5SMC33A
1.5SMC36A
1.5SMC39A
1.5SMC43A
1.5SMC47A
1.5SMC51A
1.5SMC56A
1.5SMC62A
1.5SMC68A
1.5SMC75A
1.5SMC82A
1.5SMC91A
1.5SMC100A
1.5SMC110A
1.5SMC120A
1.5SMC130A
1.5SMC150A
1.5SMC160A
1.5SMC170A
1.5SMC180A
1.5SMC200A
1.5SMC220A
1.5SMC250A
1.5SMC300A
1.5SMC350A
1.5SMC400A
1.5SMC440A
1.5SMC480A
1.5SMC510A
1.5SMC530A
1.5SMC540A
1.5SMC550A
1.5SMC6.8CA
1.5SMC7.5CA
1.5SMC8.2CA
1.5SMC9.1CA
1.5SMC10CA
1.5SMC11CA
1.5SMC12CA
1.5SMC13CA
1.5SMC15CA
1.5SMC16CA
1.5SMC18CA
1.5SMC20CA
1.5SMC22CA
1.5SMC24CA
1.5SMC27CA
1.5SMC30CA
1.5SMC33CA
1.5SMC36CA
1.5SMC39CA
1.5SMC43CA
1.5SMC47CA
1.5SMC51CA
1.5SMC56CA
1.5SMC62CA
1.5SMC68CA
1.5SMC75CA
1.5SMC82CA
1.5SMC91CA
1.5SMC100CA
1.5SMC110CA
1.5SMC120CA
1.5SMC130CA
1.5SMC150CA
1.5SMC160CA
1.5SMC170CA
1.5SMC180CA
1.5SMC200CA
1.5SMC220CA
1.5SMC250CA
1.5SMC300CA
1.5SMC350CA
1.5SMC400CA
1.5SMC440CA
1.5SMC480CA
1.5SMC510CA
1.5SMC530CA
1.5SMC540CA
1.5SMC550CA
UNI
BI
Reverse
Stand off
Voltage
VR
(Volts)
6V8A
7V5A
8V2A
9V1A
10A
11A
12A
13A
15A
16A
18A
20A
22A
24A
27A
30A
33A
36A
39A
43A
47A
51A
56A
62A
68A
75A
82A
91A
68A
75A
120A
130A
150A
160A
170A
180A
200A
220A
250A
300A
350A
400A
440A
480A
510A
530A
540A
550A
6V8C
7V5C
8V2C
9V1C
10C
11C
12C
13C
15C
16C
18C
20C
22C
24C
27C
30C
33C
36C
39C
43C
47C
51C
56C
62C
68C
75C
82C
91C
100C
110C
120C
130C
150C
160C
170C
180C
200C
220C
250C
300C
350C
400C
440C
480C
510C
530C
540C
550C
5.80
6.40
7.02
7.78
8.55
9.40
10.20
11.10
12.80
13.60
15.30
17.10
18.80
20.50
23.10
25.60
28.20
30.80
33.30
36.80
40.20
43.60
47.80
53.00
58.10
64.10
70.10
77.80
85.50
94.00
102.00
111.00
128.00
136.00
145.00
154.00
171.00
185.00
214.00
256.00
300.00
342.00
376.00
408.00
434.00
477.00
486.00
495.00
Marking
Breakdown
Voltage VBR
(Volts) @ IT
MIN
MAX
Test
Current
IT
(mA)
6.45
7.13
7.79
8.65
9.50
10.50
11.40
12.40
14.30
15.20
17.10
19.00
20.90
22.80
25.70
28.50
31.40
34.20
37.10
40.90
44.70
48.50
53.20
58.90
64.60
71.30
77.90
86.50
95.00
105.00
114.00
124.00
143.00
152.00
162.00
171.00
190.00
209.00
237.00
285.00
332.00
380.00
418.00
456.00
485.00
503.50
513.00
522.50
7.14
7.88
8.61
9.50
10.50
11.60
12.60
13.70
15.80
16.80
18.90
21.00
23.10
25.20
28.40
31.50
34.70
37.80
41.00
45.20
49.40
53.60
58.80
65.10
71.40
78.80
86.10
95.50
105.00
116.00
126.00
137.00
158.00
168.00
179.00
189.00
210.00
231.00
263.00
315.00
368.00
420.00
462.00
504.00
535.00
556.50
567.00
577.50
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Maximum Maximum Maximum
Agency
Clamping
Peak
Reverse
Approval
Voltage VC
Pulse
Leakage IR
@ Ipp
Current Ipp
@ VR
(V)
(A)
(μA)
10.5
11.3
12.1
13.4
14.5
15.6
16.7
18.2
21.2
22.5
25.2
27.7
30.6
33.2
37.5
41.4
45.7
49.9
53.9
59.3
64.8
70.1
77.0
85.0
92.0
103.0
113.0
125.0
137.0
152.0
165.0
179.0
207.0
219.0
234.0
246.0
274.0
328.0
344.0
414.0
482.0
548.0
602.0
658.0
698.0
725.0
740.0
760.0
144.8
134.5
125.6
113.4
104.8
97.4
91.0
83.5
71.7
67.6
60.3
54.9
49.7
45.8
40.5
36.7
33.3
30.5
28.2
25.6
23.5
21.7
19.7
17.9
16.5
14.8
13.5
12.2
11.1
10.0
9.2
8.5
7.3
6.9
6.5
6.2
5.5
4.6
4.4
3.7
3.2
2.8
2.5
2.3
2.1
2.1
2.0
2.0
1000
500
200
50
10
5
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
For bidirectional type having VR of 10 volts and less, the IR limit is double.
The avaliable parts are “A” type only, the parts without A (VBR is ± 10%) is not avaliable.
1.5SMC Series
48
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Surface Mount – 1500W > 1.5SMC series
Ratings and Characteristic Curves (T =25°C unless otherwise noted)
A
Figure 1 - Peak Pulse Power Rating
Figure 2 - Pulse Derating Curve
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage %
PPPM-Peak Pulse Power (kW)
100
10
0.31x0.31" (8.0x8.0mm)
Copper Pad Area
100
75
50
25
0
1
0.000001
0.00001
0.0001
0
0.001
Figure 3 - Pulse Waveform
100
125
150
175
200
100000
tr=10μsec
TJ=25°C
Pulse Width(td) is deﬁned
as the point where the peak
current decays to 50% of IPPM
Peak Value
IPPM
100
Bi-directional V=0V
10000
Uni-directional V=0V
Cj (pF)
IPPM- Peak Pulse Current, % IRSM
75
Figure 4 - Typical Junction Capacitance
150
Half Value
IPPM IPPM
( )
2
50
1000
Uni-directional @VR
100
10/1000μsec. Waveform
as deﬁned by R.E.A
Bi-directional @VR
10
td
1.0
0
2.0
3.0
Tj=25C
f=1.0MHz
Vsig=50mVp-p
1
1.0
4.0
t-Time (ms)
Figure 5 - Steady State Power Dissipation Derating
Curve
10.0
100.0
1000.0
VBR - Reverse Breakdown Voltage (V)
Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional Only
6.5
6
5.5
5
4.5
4
3.5
3
2.5
2
1.5
1
0.5
0
200
IFSM - Peak Forward Surge Current (A)
PM(AV), Steady Sate Power
Dissipation (W)
50
TA - Ambient Temperature (ºC)
td-Pulse Width (sec.)
0
25
180
160
140
120
100
80
60
40
20
0
0
25
50
75
100
125
150
175
1
TA - Ambient Temperature (ºC)
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
10
100
Number of Cycles at 60 Hz
49
1.5SMC Series
Transient Voltage Suppression Diodes
Surface Mount – 1500W > 1.5SMC series
Soldering Parameters
Reﬂow Condition
-FBEoGSFFBTTFNCMZ
tp
TP
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
oTFDT
Ramp-up
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
3°C/second max
Reﬂow
- Temperature (TL) (Liquidus)
217°C
- Time (min to max) (ts)
oTFDPOET
tL
Ts(max)
Ramp-down
Ts(min)
ts
Preheat
25˚C
Peak Temperature (TP)
260
Time within 5°C of actual peak
Temperature (tp)
oTFDPOET
Ramp-down Rate
6°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
280°C
+0/-5
Critical Zone
TL to TP
TL
Temperature (T)
Pre Heat
t 25˚C to Peak
Time (t)
°C
Physical Speciﬁcations
Environmental Speciﬁcations
Weight
0.007 ounce, 0.21 grams
Temperature Cycle
JESD22-A104
Case
JEDEC DO214AB. Molded plastic body
over glass passivated junction
Pressure Cooker
JESD 22-A102
Polarity
Color band denotes positive end
(cathode) except Bidirectional.
High Temp. Storage
JESD22-A103
Terminal
Matte Tin-plated leads, Solderable per
JESD22-B102D
HTRB
JESD22-A108
Thermal Shock
JESD22-A106
Dimensions
DO-214AB (SMC J-Bend)
Dimensions
Cathode Band
C
A
B
H
D
F
E
G
J
K
L
I
1.5SMC Series
50
Inches
Min
Millimeters
Max
Min
Max
A
0.114
0.126
2.900
3.200
B
0.260
0.280
6.600
7.110
C
0.220
0.245
5.590
6.220
D
0.079
0.103
2.060
2.620
E
0.030
0.060
0.760
1.520
F
-
0.008
-
0.203
G
0.305
0.320
7.750
8.130
H
0.006
0.012
0.152
0.305
I
0.129
-
3.300
-
J
0.094
-
2.400
-
K
-
0.165
-
4.200
L
0.094
-
2.400
-
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Surface Mount – 1500W > 1.5SMC series
Part Numbering System
Part Marking System
1.5SMC XXX C A
Cathode Band
XXX
5% VOLTAGE TOLERANCE
BI-DIRECTIONAL
F
VOLTAGE
SERIES
Littelfuse Logo
Marking Code
Packaging
Part number
Component
Package
1.5SMCxxxXX
DO-214AB
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Quantity
3000
Packaging
Option
5BQF3FFMoNNwUBQF
51
Packaging
Speciﬁcation
EIA STD RS-481
1.5SMC Series
Transient Voltage Suppression Diodes
52
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Surface Mount – 3000W > SMDJ series
SMDJ Series
Description
The SMDJ series is designed specifically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Features
t 3P)4DPNQMJBOU
t 'PSTVSGBDFNPVOUFE
applications in order to
optimize board space
t -PXQSPmMFQBDLBHF
t #VJMUJOTUSBJOSFMJFG
t 5ZQJDBMNBYJNVN
temperature coefﬁcient
Δ VBR = 0.1% × VBR@25°C
t (MBTTQBTTJWBUFEDIJQ
junction
t 8QFBLQVMTFQPXFS
capability at 10×1000μs
waveform, repetition rate
(duty cycles):0.01%
t 'BTUSFTQPOTFUJNF
typically less than 1.0ps
from 0V to BV min
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Symbol
Value
Unit
Peak Pulse Power Dissipation at
TA=25ºC by 10x1000μs waveform
(Fig.1)(Note 1), (Note 2)
Parameter
PPPM
3000
W
Power Dissipation on inﬁnite heat
sink at TA=50OC
PM(AV)
6.5
W
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave (Note 3)
IFSM
300
A
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
only
VF
3.5
V
TJ , TSTG
-65 to 150
°C
Typical Thermal Resistance Junction
to Lead
RuJL
15
°C/W
Typical Thermal Resistance Junction
to Ambient
RuJA
75
°C/W
Operating Junction and Storage
Temperature Range
t &YDFMMFOUDMBNQJOH
capability
t -PXJODSFNFOUBMTVSHF
resistance
t 5ZQJDBM*R less than 2μA
above 12V
t )JHI5FNQFSBUVSF
soldering guaranteed:
260°C/40 seconds at
terminals
t 1MBTUJDQBDLBHFIBT
Underwriters Laboratory
Flammability 94V-O
t .BUUF5JO-FBEoGSFF
Plated
Applications
TVS devices are ideal for the protection of I/O Interfaces,
VCC bus and other vulnerable circuits used in Telecom,
Computer, Industrial and Consumer electronic applications.
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only, duty cycle=4 per minute maximum.
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
53
SMDJ Series
SMDJ Series
RoHS
Transient Voltage Suppression Diodes
Surface Mount – 3000W > SMDJ series
Electrical Characteristics
Part
Number
(Uni)
Part
Number
(Bi)
SMDJ5.0A
SMDJ6.0A
SMDJ6.5A
SMDJ7.0A
SMDJ7.5A
SMDJ8.0A
SMDJ8.5A
SMDJ9.0A
SMDJ10A
SMDJ11A
SMDJ12A
SMDJ13A
SMDJ14A
SMDJ15A
SMDJ16A
SMDJ17A
SMDJ18A
SMDJ20A
SMDJ22A
SMDJ24A
SMDJ26A
SMDJ28A
SMDJ30A
SMDJ33A
SMDJ36A
SMDJ40A
SMDJ43A
SMDJ45A
SMDJ48A
SMDJ51A
SMDJ54A
SMDJ58A
SMDJ60A
SMDJ64A
SMDJ70A
SMDJ75A
SMDJ78A
SMDJ85A
SMDJ90A
SMDJ100A
SMDJ110A
SMDJ120A
SMDJ130A
SMDJ150A
SMDJ160A
SMDJ170A
SMDJ5.0CA
SMDJ6.0CA
SMDJ6.5CA
SMDJ7.0CA
SMDJ7.5CA
SMDJ8.0CA
SMDJ8.5CA
SMDJ9.0CA
SMDJ10CA
SMDJ11CA
SMDJ12CA
SMDJ13CA
SMDJ14CA
SMDJ15CA
SMDJ16CA
SMDJ17CA
SMDJ18CA
SMDJ20CA
SMDJ22CA
SMDJ24CA
SMDJ26CA
SMDJ28CA
SMDJ30CA
SMDJ33CA
SMDJ36CA
SMDJ40CA
SMDJ43CA
SMDJ45CA
SMDJ48CA
SMDJ51CA
SMDJ54CA
SMDJ58CA
SMDJ60CA
SMDJ64CA
SMDJ70CA
SMDJ75CA
SMDJ78CA
SMDJ85CA
SMDJ90CA
SMDJ100CA
SMDJ110CA
SMDJ120CA
SMDJ130CA
SMDJ150CA
SMDJ160CA
SMDJ170CA
UNI
BI
Reverse
Stand off
Voltage
VR
(Volts)
RDE
RDG
RDK
PDM
PDP
PDR
PDT
PDV
PDX
PDZ
PEE
PEG
PEK
PEM
PEP
PER
PET
PEV
PEX
PEZ
PFE
PFG
PFK
PFM
PFP
PFR
PFT
PFV
PFX
PFZ
RGE
PGG
PGK
PGM
PGP
PGR
PGT
PGV
PGX
PGZ
PHE
PHG
PHK
PHM
PHP
PHR
DDE
DDG
DDK
DDM
DDP
DDR
DDT
DDV
DDX
DDZ
DEE
DEG
DEK
DEM
DEP
DER
DET
DEV
DEX
DEZ
DFE
DFG
DFK
DFM
DFP
DFR
DFT
DFV
DFX
DFZ
DGE
DGG
DGK
DGM
DGP
DGR
DGT
DGV
DGX
DGZ
DHE
DHG
DHK
DHM
DHP
DHR
5.0
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
20.0
22.0
24.0
26.0
28.0
30.0
33.0
36.0
40.0
43.0
45.0
48.0
51.0
54.0
58.0
60.0
64.0
70.0
75.0
78.0
85.0
90.0
100.0
110.0
120.0
130.0
150.0
160.0
170.0
Marking
Breakdown
Voltage VBR
(Volts) @ IT
MIN
MAX
Test
Current
IT
(mA)
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.00
11.10
12.20
13.30
14.40
15.60
16.70
17.80
18.90
20.00
22.20
24.40
26.70
28.90
31.10
33.30
36.70
40.00
44.40
47.80
50.00
53.30
56.70
60.00
64.40
66.70
71.10
77.80
83.30
86.70
94.40
100.00
111.00
122.00
133.00
144.00
167.00
178.00
189.00
7.00
7.37
7.98
8.60
9.21
9.83
10.40
11.10
12.30
13.50
14.70
15.90
17.20
18.50
19.70
20.90
22.10
24.50
26.90
29.50
31.90
34.40
36.80
40.60
44.20
49.10
52.80
55.30
58.90
62.70
66.30
71.20
73.70
78.60
86.00
92.10
95.80
104.00
111.00
123.00
135.00
147.00
159.00
185.00
197.00
209.00
10
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Maximum Maximum Maximum
Agency
Clamping
Peak
Reverse
Approval
Voltage VC
Pulse
Leakage IR
@ Ipp
Current Ipp
@ VR
(V)
(A)
(μA)
9.2
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103.0
113.0
121.0
126.0
137.0
146.0
162.0
177.0
193.0
209.0
243.0
259.0
275.0
326.1
291.3
267.9
250.0
232.6
220.6
208.3
194.8
176.5
164.8
150.8
139.5
129.3
123.0
115.4
108.7
102.7
92.6
84.5
77.1
71.3
66.1
62.0
56.3
51.6
46.5
43.2
41.3
38.8
36.4
34.4
32.1
31.0
29.1
26.5
24.8
23.8
21.9
20.5
18.5
16.9
15.5
14.4
12.3
11.6
10.9
800
800
500
200
100
50
20
10
5
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
For parts without A , the VBR is ± 10%, and VC is 5% higher than A parts.
For bidirectional type having VR of 10 volts and less, the IR limit is double.
SMDJ Series
54
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Surface Mount – 3000W > SMDJ series
Ratings and Characteristic Curves (T =25°C unless otherwise noted)
A
Figure 1 - Peak Pulse Power Rating Curve
Figure 2 - Pulse Derating Curve
100
Peak Pulse Power (PPP) or
Current (IPP) Derating in
Percentage %
PPPM-Peak Pulse Power (KW)
1000
100
10
1
80
60
40
20
0.31x0.31" (8.0x8.0mm)
Copper Pad Area
0.1
0
0.0000001
0.000001
0.00001
0.0001
0
0.001
Figure 3 - Pulse Waveform
75
100
125
150
175
Figure 4 - Typical Junction Capacitance
100000
150
tr=10μsec
TJ=25°C
Pulse Width(td) is deﬁned
as the point where the peak
current decays to 50% of IPPM
Peak Value
IPPM
100
Bi-directional V= OV
10000
Uni-directional V= OV
Cj (pF)
IPPM- Peak Pulse Current, % IRSM
50
TA - Ambient temperature (ºC)
td-Pulse Width (Sec.)
Half Value
IPPM IPPM
( )
2
50
1000
Uni-directional @ VR
100
10/1000μsec. Waveform
as deﬁned by R.E.A
Bi-directional @ VR
10
0
td
1.0
0
2.0
3.0
1
1.0
4.0
10.0
100.0
1000.0
VBR - Reverse Breakdown Voltage (V)
t-Time (ms)
Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional only
Figure 5 - Steady State Power Derating Curve
6.5
6
5.5
5
4.5
4
3.5
3
2.5
2
1.5
1
0.5
0
350
IFSM - Peak Forward Surge Current
(A)
PM(AV), Steady Sate Power
Dissipation (W)
25
0
25
50
75
100
125
150
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
250
200
150
100
50
0
175
1
TA - Ambient Temperature(ºC)
©2008 Littelfuse, Inc.
300
10
100
Number of Cycles at 60 Hz
55
SMDJ Series
Transient Voltage Suppression Diodes
Surface Mount – 3000W > SMDJ series
Soldering Parameters
Reﬂow Condition
-FBEoGSFFBTTFNCMZ
tp
TP
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
oTFDT
Ramp-up
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
3°C/second max
Reﬂow
Critical Zone
TL to TP
TL
- Temperature (TL) (Liquidus)
217°C
- Time (min to max) (ts)
oTFDPOET
Temperature (T)
Pre Heat
- Temperature Min (Ts(min))
tL
Ts(max)
Ramp-down
Ts(min)
ts
Preheat
25˚C
t 25˚C to Peak
Peak Temperature (TP)
260
Time within 5°C of actual peak
Temperature (tp)
oTFDPOET
Ramp-down Rate
6°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
280°C
+0/-5
Time (t)
°C
Physical Speciﬁcations
Environmental Speciﬁcations
Weight
0.007 ounce, 0.21 grams
Temperature Cycle
JESD22-A104
Case
JEDEC DO214AB. Molded plastic body
over glass passivated junction
Pressure Cooker
JESD 22-A102
Polarity
Color band denotes positive end
(cathode) except Bidirectional.
High Temp. Storage
JESD22-A103
Terminal
Matte Tin-plated leads, Solderable per
JESD22-B102D
HTRB
JESD22-A108
Thermal Shock
JESD22-A106
Dimensions
DO-214AB (SMC J-Bend)
Dimensions
Cathode Band
C
A
B
H
D
F
E
G
J
K
L
I
SMDJ Series
56
Inches
Min
Millimeters
Max
Min
Max
A
0.114
0.126
2.900
3.200
B
0.260
0.280
6.600
7.110
C
0.220
0.245
5.590
6.220
D
0.079
0.103
2.060
2.620
E
0.030
0.060
0.760
1.520
F
-
0.008
-
0.203
G
0.305
0.320
7.750
8.130
H
0.006
0.012
0.152
0.305
I
0.129
-
3.300
-
J
0.094
-
2.400
-
K
-
0.165
L
0.094
-
4.200
2.400
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Surface Mount – 3000W > SMDJ series
Part Numbering System
Part Marking System
SMDJ XXX C A
Cathode Band
XXX
5% VOLTAGE TOLERANCE
BI-DIRECTIONAL
F
VOLTAGE
SERIES
Littelfuse Logo
Product Type
Packaging
Part number
Component
Package
SMDJxxxXX
DO-214AB
Quantity
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
3000
Packaging
Option
5BQF3FFMoNNwUBQF
57
Packaging
Speciﬁcation
EIA STD RS-481
SMDJ Series
Transient Voltage Suppression Diodes
58
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Surface Mount – 5000W > 5.0SMDJ series
5.0SMDJ Series
Description
The 5.0SMDJ series is designed specifically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Features
t 3P)4DPNQMJBOU
t 'PSTVSGBDFNPVOUFE
applications to optimize
board space
t -PXQSPmMFQBDLBHF
t #VJMUJOTUSBJOSFMJFG
t 5ZQJDBMNBYJNVN
temperature coefﬁcient
Δ VBR = 0.1% × VBR@25°C
t (MBTTQBTTJWBUFEDIJQ
junction
t 8QFBLQVMTFQPXFS
capability at 10×1000μs
waveform, repetition rate
(duty cycles):0.01%
t 'BTUSFTQPOTFUJNF
typically less than 1.0ps
from 0V to BV min
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Symbol
Value
Unit
Peak Pulse Power Dissipation at
TA=25OC by 10x1000μs waveform
(Fig.1)(Note 1), (Note 2)
Parameter
PPPM
5000
W
Power Dissipation on inﬁnite heat
sink at TA=50OC
PM(AV)
6.5
W
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave (Note 3)
IFSM
300
A
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
only
VF
5.0
V
TJ , TSTG
-65 to 150
°C
Typical Thermal Resistance Junction
to Lead
RuJL
15
°C/W
Typical Thermal Resistance Junction
to Ambient
RuJA
75
°C/W
Operating Junction and Storage
Temperature Range
t &YDFMMFOUDMBNQJOH
capability
t -PXJODSFNFOUBMTVSHF
resistance
t 5ZQJDBM*R less than 5μA
above 22V
t )JHI5FNQFSBUVSF
soldering guaranteed:
260°C/40 seconds at
terminals
t 1MBTUJDQBDLBHFIBT
Underwriters Laboratory
Flammability 94V-O
t .BUUF5JO-FBEoGSFF
Plated
Applications
TVS devices are ideal for the protection of I/O Interfaces,
VCC bus and other vulnerable circuits used in Telecom,
Computer, Industrial and Consumer electronic applications.
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only,duty cycle=4 per minute maximum.
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
59
5.0SMDJ Series
5.0SMDJ Series
RoHS
Transient Voltage Suppression Diodes
Surface Mount – 5000W > 5.0SMDJ series
Electrical Characteristics
Part
Number
(Uni)
Part
Number
(Bi)
5.0SMDJ12A
5.0SMDJ13A
5.0SMDJ14A
5.0SMDJ15A
5.0SMDJ16A
5.0SMDJ17A
5.0SMDJ18A
5.0SMDJ20A
5.0SMDJ22A
5.0SMDJ24A
5.0SMDJ26A
5.0SMDJ28A
5.0SMDJ30A
5.0SMDJ33A
5.0SMDJ36A
5.0SMDJ40A
5.0SMDJ43A
5.0SMDJ45A
5.0SMDJ48A
5.0SMDJ51A
5.0SMDJ54A
5.0SMDJ58A
5.0SMDJ60A
5.0SMDJ64A
5.0SMDJ70A
5.0SMDJ75A
5.0SMDJ78A
5.0SMDJ85A
5.0SMDJ90A
5.0SMDJ100A
5.0SMDJ110A
5.0SMDJ120A
5.0SMDJ130A
5.0SMDJ150A
5.0SMDJ160A
5.0SMDJ170A
5.0SMDJ12CA
5.0SMDJ13CA
5.0SMDJ14CA
5.0SMDJ15CA
5.0SMDJ16CA
5.0SMDJ17CA
5.0SMDJ18CA
5.0SMDJ20CA
5.0SMDJ22CA
5.0SMDJ24CA
5.0SMDJ26CA
5.0SMDJ28CA
5.0SMDJ30CA
5.0SMDJ33CA
5.0SMDJ36CA
5.0SMDJ40CA
5.0SMDJ43CA
5.0SMDJ45CA
-
UNI
BI
Reverse
Stand off
Voltage
VR
(Volts)
5PEP
5PEQ
5PER
5PES
5PET
5PEU
5PEV
5PEW
5PEX
5PEZ
5PFE
5PFG
5PFK
5PFM
5PFP
5PFR
5PFT
5PFV
5PFX
5PFZ
5RGE
5PGG
5PGK
5PGM
5PGP
5PGR
5PGT
5PGV
5PGX
5PGZ
5PHE
5PHG
5PHK
5PHM
5PHP
5PHR
5BEP
5BEQ
5BER
5BES
5BET
5BEU
5BEV
5BEW
5BEX
5BEZ
5BFE
5BFG
5BFK
5BFM
5BFP
5BFR
5BFT
5BFV
-
12.0
13.0
14.0
15.0
16.0
17.0
18.0
20.0
22.0
24.0
26.0
28.0
30.0
33.0
36.0
40.0
43.0
45.0
48.0
51.0
54.0
58.0
60.0
64.0
70.0
75.0
78.0
85.0
90.0
100.0
110.0
120.0
130.0
150.0
160.0
170.0
Marking
Breakdown
Voltage VBR
(Volts) @ IT
MIN
MAX
Test
Current
IT
(mA)
13.30
14.40
15.60
16.70
17.80
18.90
20.00
22.20
24.40
26.70
28.90
31.10
33.30
36.70
40.00
44.40
47.80
50.00
53.30
56.70
60.00
64.40
66.70
71.10
77.80
83.30
86.70
94.40
100.00
111.00
122.00
133.00
144.00
167.00
178.00
189.00
14.70
15.90
17.20
18.50
19.70
20.90
22.10
24.50
26.90
29.50
31.90
34.40
36.80
40.60
44.20
49.10
52.80
55.30
58.90
62.70
66.30
71.20
73.70
78.60
86.00
92.10
95.80
104.00
111.00
123.00
135.00
147.00
159.00
185.00
197.00
209.00
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Maximum Maximum Maximum
Agency
Clamping
Peak
Reverse
Approval
Voltage VC
Pulse
Leakage IR
@ Ipp
Current Ipp
@ VR
(V)
(A)
(μA)
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103.0
113.0
121.0
126.0
137.0
146.0
162.0
177.0
193.0
209.0
243.0
259.0
275.0
252.00
233.00
216.00
205.00
193.00
181.00
172.00
155.00
141.00
129.00
119.00
110.00
103.00
93.90
86.10
77.60
72.10
68.80
64.70
60.70
57.50
53.50
51.70
48.60
44.30
41.40
39.70
36.50
34.30
30.90
28.30
26.00
24.00
20.60
19.30
18.20
800
500
200
100
50
20
10
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
For Bidirectional type having VR of 20 volts and less,the IR limit is double.
5.0SMDJ Series
60
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Surface Mount – 5000W > 5.0SMDJ series
Ratings and Characteristic Curves (T =25°C unless otherwise noted)
A
Figure 1 - Peak Pulse Power Rating Curve
Figure 2 - Pulse Derating Curve
100
Peak Pulse Power (PPP) or
Current (IPP) Derating in
Percentage %
PPPM-Peak Pulse Power (KW)
1000
100
10
1
80
60
40
20
0.31x0.31" (8.0x8.0mm)
Copper Pad Area
0.1
0
0.000001
0.0000001
0.00001
0.0001
0
0.001
Figure 3 - Pulse Waveform
75
100
125
150
175
100000
tr=10μsec
TJ=25°C
Pulse Width(td) is deﬁned
as the point where the peak
current decays to 50% of IPPM
Peak Value
IPPM
100
Bi-directional V= OV
10000
Uni-directional V= OV
Cj (pF)
IPPM- Peak Pulse Current, % IRSM
50
Figure 4 - Typical Junction Capacitance
150
Half Value
IPPM IPPM
( )
2
50
1000
Uni-directional @ VR
100
10/1000μsec. Waveform
as deﬁned by R.E.A
Bi-directional @ VR
10
0
td
1.0
0
2.0
3.0
1
1.0
4.0
10.0
100.0
1000.0
VBR - Reverse Breakdown Voltage (V)
t-Time (ms)
Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional Only
Figure 5 - Steady State Power Derating Curve
6.5
6
5.5
5
4.5
4
3.5
3
2.5
2
1.5
1
0.5
0
350
IFSM - Peak Forward Surge Current (A)
PM(AV), Steady State Power Dissipation (W)
25
TA-Ambient temperature (ºC)
td-Pulse Width (Sec.)
300
250
200
150
100
50
0
0
25
50
75
100
125
150
175
1
TA-Ambient Temperature (ºC)
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
10
100
Number of Cycles at 60 Hz
61
5.0SMDJ Series
Transient Voltage Suppression Diodes
Surface Mount – 5000W > 5.0SMDJ series
Soldering Parameters
Reﬂow Condition
-FBEoGSFFBTTFNCMZ
tp
TP
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
oTFDT
Ramp-up
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
3°C/second max
Reﬂow
Critical Zone
TL to TP
TL
- Temperature (TL) (Liquidus)
217°C
- Time (min to max) (ts)
oTFDPOET
Temperature (T)
Pre Heat
- Temperature Min (Ts(min))
tL
Ts(max)
Ramp-down
Ts(min)
ts
Preheat
25˚C
t 25˚C to Peak
Peak Temperature (TP)
260
Time within 5°C of actual peak
Temperature (tp)
oTFDPOET
Ramp-down Rate
6°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
280°C
+0/-5
Time (t)
°C
Physical Speciﬁcations
Environmental Speciﬁcations
Weight
0.007 ounce, 0.21 grams
Temperature Cycle
JESD22-A104
Case
JEDEC DO214AB. Molded plastic body
over glass passivated junction
Pressure Cooker
JESD 22-A102
Polarity
Color band denotes positive end
(cathode) except Bidirectional.
High Temp. Storage
JESD22-A103
Terminal
Matte Tin-plated leads, Solderable per
JESD22-B102D
HTRB
JESD22-A108
Thermal Shock
JESD22-A106
Dimensions
DO-214AB (SMC J-Bend)
Dimensions
C
B
H
D
F
E
G
J
K
L
I
5.0SMDJ Series
62
Millimeters
Min
Max
Min
Max
A
0.114
0.126
2.900
3.200
B
0.260
0.280
6.600
7.110
C
0.220
0.245
5.590
6.220
D
0.079
0.103
2.060
2.620
E
0.030
0.060
0.760
1.520
Cathode Band
A
Inches
F
-
0.008
-
0.203
G
0.305
0.320
7.750
8.130
H
0.006
0.012
0.152
0.305
I
0.129
-
3.300
-
J
0.094
-
2.400
-
K
-
0.165
-
4.200
L
0.094
-
2.400
-
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Surface Mount – 5000W > 5.0SMDJ series
Part Numbering System
Part Marking System
5.0SMDJ XXX C A
Cathode Band
XXXX
5% VOLTAGE TOLERANCE
BI-DIRECTIONAL
F
VOLTAGE
SERIES
Littelfuse Logo
Marking Code
Packaging
Part number
Component
Package
5.0SMDJxxxXX
DO-214AB
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Quantity
3000
Packaging
Option
5BQF3FFMoNNwUBQF
63
Packaging
Speciﬁcation
EIA STD RS-481
5.0SMDJ Series
Transient Voltage Suppression Diodes
64
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 400W > P4KE series
RoHS
P4KE Series
Description
The P4KE Series is designed speciﬁcally to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
t 3P)4DPNQMJBOU
t 5ZQJDBMNBYJNVN
temperature coefﬁcient
Δ VBR = 0.1% × VBR@25°C
t (MBTTQBTTJWBUFEDIJQ
junction in DO-41
Package
t 8QFBLQVMTF
capability at 10×1000μs
waveform, repetition rate
(duty cycles):0.01%
t 'BTUSFTQPOTFUJNF
typically less than 1.0ps
from 0 Volts to BV min
t &YDFMMFOUDMBNQJOH
capability
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Symbol
Value
Unit
PPPM
400
W
PD
1.5
W
IFSM
40
A
VF
3.5/5.0
V
TJ , TSTG
-55 to 175
°C
Typical Thermal Resistance Junction
to Lead
RuJL
60
°C/W
Typical Thermal Resistance Junction
to Ambient
RuJA
100
°C/W
Peak Pulse Power Dissipation by
10x1000μs test waveform (Fig.1)
(Note 1)
Steady State Power Dissipation on
iniﬁnite heat sink at TL=75ºC (Fig. 5)
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional
only (Note 2)
Maximum Instantaneous Forward
Voltage at 25A for Unidirectional
only (Note 3)
Operating Junction and Storage
Temperature Range
t -PXJODSFNFOUBMTVSHF
resistance
t 5ZQJDBM*R less than 1μA
above 13V
t )JHIUFNQFSBUVSF
soldering guaranteed:
260°C/40 seconds /
0.375”,(9.5mm) lead
length, 5 lbs., (2.3kg)
tension
t 1MBTUJDQBDLBHFIBT
Underwriters Laboratory
Flammability classiﬁcation
94V-O
t .BUUF5JO-FBEoGSFF
plated
Applications
TVS devices are ideal for the protection of I/O interfaces,
VCC bus and other vulnerable circuits used in telecom,
computer, industrial and consumer electronic applications.
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
3. VF<3.5V for devices of VBR <
_ 200V and VF<5.0V for devices of VBR >
_ 201V.
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
65
P4KE Series
P4KE Series
Features
Transient Voltage Suppression Diodes
Axial Leaded – 400W > P4KE series
Electrical Characteristics
Part
Number
(Uni)
Part
Number
(Bi)
Reverse
Stand off
Voltage VR
(Volts)
P4KE6.8A
P4KE7.5A
P4KE8.2A
P4KE9.1A
P4KE10A
P4KE11A
P4KE12A
P4KE13A
P4KE15A
P4KE16A
P4KE18A
P4KE20A
P4KE22A
P4KE24A
P4KE27A
P4KE30A
P4KE33A
P4KE36A
P4KE39A
P4KE43A
P4KE47A
P4KE51A
P4KE56A
P4KE62A
P4KE68A
P4KE75A
P4KE82A
P4KE91A
P4KE100A
P4KE110A
P4KE120A
P4KE130A
P4KE150A
P4KE160A
P4KE170A
P4KE180A
P4KE200A
P4KE220A
P4KE250A
P4KE300A
P4KE350A
P4KE400A
P4KE440A
P4KE480A
P4KE510A
P4KE530A
P4KE540A
P4KE550A
P4KE6.8CA
P4KE7.5CA
P4KE8.2CA
P4KE9.1CA
P4KE10CA
P4KE11CA
P4KE12CA
P4KE13CA
P4KE15CA
P4KE16CA
P4KE18CA
P4KE20CA
P4KE22CA
P4KE24CA
P4KE27CA
P4KE30CA
P4KE33CA
P4KE36CA
P4KE39CA
P4KE43CA
P4KE47CA
P4KE51CA
P4KE56CA
P4KE62CA
P4KE68CA
P4KE75CA
P4KE82CA
P4KE91CA
P4KE100CA
P4KE110CA
P4KE120CA
P4KE130CA
P4KE150CA
P4KE160CA
P4KE170CA
P4KE180CA
P4KE200CA
P4KE220CA
P4KE250CA
P4KE300CA
P4KE350CA
P4KE400CA
P4KE440CA
P4KE480CA
P4KE510CA
P4KE530CA
P4KE540CA
P4KE550CA
5.80
6.40
7.02
7.78
8.55
9.40
10.20
11.10
12.80
13.60
15.30
17.10
18.80
20.50
23.10
25.60
28.20
30.80
33.30
36.80
40.20
43.60
47.80
53.00
58.10
64.10
70.10
77.80
85.50
94.00
102.00
111.00
128.00
136.00
145.00
154.00
171.00
185.00
214.00
256.00
300.00
342.00
376.00
408.00
434.00
477.00
486.00
495.00
Breakdown
Voltage
VBR@ IT (V)
MIN
MAX
Test
Current
IT
(mA)
6.45
7.13
7.79
8.65
9.50
10.50
11.40
12.40
14.30
15.20
17.10
19.00
20.90
22.80
25.70
28.50
31.40
34.20
37.10
40.90
44.70
48.50
53.20
58.90
64.60
71.30
77.90
86.50
95.00
105.00
114.00
124.00
143.00
152.00
162.00
171.00
190.00
209.00
237.00
285.00
332.00
380.00
418.00
456.00
485.00
503.50
513.00
522.50
7.14
7.88
8.61
9.55
10.50
11.60
12.60
13.70
15.80
16.80
18.90
21.00
23.10
25.20
28.40
31.50
34.70
37.80
41.00
45.20
49.40
53.60
58.80
65.10
71.40
78.80
86.10
95.50
105.00
116.00
126.00
137.00
158.00
168.00
179.00
189.00
210.00
231.00
263.00
315.00
368.00
420.00
462.00
504.00
535.00
556.50
567.00
577.50
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Maximum
Clamping
Voltage
VC @ Ipp
(V)
Maximum
Peak
Pulse
Current Ipp
(A)
Maximum
Reverse
Leakage
IR @ VR(μA)
Agency
Approval
10.5
11.3
12.1
13.4
14.5
15.6
16.7
18.2
21.2
22.5
25.5
27.7
30.6
33.2
37.5
41.4
45.7
49.9
53.9
59.3
64.8
70.1
77.0
85.0
92.0
103.0
113.0
125.0
137.0
152.0
165.0
179.0
207.0
219.0
234.0
246.0
274.0
328.0
344.0
414.0
482.0
548.0
602.0
658.0
698.0
725.0
740.0
760.0
39.00
36.30
33.90
30.60
28.30
26.30
24.60
22.50
19.30
18.20
16.10
14.80
13.40
12.30
10.90
9.90
9.00
8.20
7.60
6.90
6.30
5.80
5.30
4.80
4.50
4.00
3.60
3.30
3.00
2.70
2.50
2.30
2.00
1.90
1.80
1.70
1.50
1.30
1.20
1.00
0.85
0.75
0.68
0.61
0.57
0.55
0.54
0.52
1000
500
200
50
10
5
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
For bidirectional type having VR of 10 volts and less, the IR limit is double.
For parts without A , the VBR is ± 10% and VC is 5% higher than with A parts
P4KE Series
66
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 400W > P4KE series
Ratings and Characteristic Curves (T =25°C unless otherwise noted)
A
Figure 1 - Peak Pulse Power Rating
Figure 2 - Pulse Derating Curve
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage, %
PPPM- Peak Pulse Power (KW)
100
10
1
0.1
0.1μs
100
75
50
25
0
1.0μs
10μs
100μs
1.0ms
10ms
0
td - Pulse Width (sec.)
50
75
100
125 150
175 200
TA- Ambient Temperature (˚C)
Figure 3 - Pulse Waveform
Figure 4 - Typical Junction Capacitance Uni-Directional
10000
150
tr=10μsec
TJ=25°C
Pulse Width(td) is deﬁned
as the point where the peak
current decays to 50% of IPPM
Peak Value
IPPM
100
Bi-directional VR=0V
1000
Cj (pF)
IPPM- Peak Pulse Current, % IRSM
25
Half Value
IPPM IPPM
( )
Uni-directional VR=0V
Uni-directional @ V R
100
2
50
Bi-directional @V R
10/1000μsec. Waveform
as deﬁned by R.E.A
10
Tj=25C
f=1.0MHz
Vsig=50mVp-p
0
td
1.0
0
2.0
3.0
1
1.0
4.0
t-Time (ms)
10.0
100.0
1000.0
VBR - Reverse Breakdown Voltage (V)
Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional Only
Figure 5 - Steady Pulse Derating Curve
1.2
1
IFSM - Peak Forward Surge Current
(A)
Steady Sate Power Dissipation (W)
45
0.8
0.6
L = 0.375" (9.5mm)
Lead Lengths
0.4
0.2
40
35
30
25
20
15
10
5
0
0
25
50
75
100
125
150
175
0
200
1
TL-Lead Temperature(ºC)
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
10
100
Number of Cycles at 60 Hz
67
P4KE Series
Transient Voltage Suppression Diodes
Axial Leaded – 400W > P4KE series
Soldering Parameters
Reﬂow Condition
-FBEoGSFFBTTFNCMZ
Pre Heat
Ramp-up
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
oTFDT
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
3°C/second max
Reﬂow
Critical Zone
TL to TP
TL
Temperature (T)
- Temperature Min (Ts(min))
tp
TP
tL
Ts(max)
Ramp-down
Ts(min)
ts
Preheat
25˚C
- Temperature (TL) (Liquidus)
217°C
- Time (min to max) (ts)
oTFDPOET
t 25˚C to Peak
Time (t)
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
oTFDPOET
Flow/Wave Soldering (Solder Dipping)
Ramp-down Rate
6°C/second max
Peak Temperature :
260OC
Time 25°C to peak Temperature (TP)
8 minutes Max.
Dipping Time :
5 seconds
Do not exceed
280°C
Soldering :
1 time
Physical Speciﬁcations
Environmental Speciﬁcations
Weight
0.012oz., 0.3g
Temperature Cycle
JESD22-A104
Case
JEDEC DO-204AL (DO-41) molded
plastic body over passivated junction.
Pressure Cooker
JESD 22-A102
Polarity
Color band denotes the cathode except
Bipolar.
High Temp. Storage
JESD22-A103
Terminal
Matte Tin axial leads, solderable per
JESD22-B102D.
HTRB
JESD22-A108
Thermal Shock
JESD22-A106
Dimensions
Dimensions
D
A
B
A
Millimeters
Min
Max
Min
Max
1.000
-
25.40
-
B
0.160
0.205
4.10
5.20
C
0.028
0.034
0.71
0.86
D
0.080
0.107
2.00
2.70
A
C
Inches
DO-204AL (DO-41)
P4KE Series
68
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 400W > P4KE series
Part Numbering System
Part Marking System
Cathode Band
P4KE xxx XX X
P4KEXXX
OPTION CODE:
BLANK Reel Tape
-B Bulk Packaging
TYPE CODE:
A Uni-Directional (5% Voltage Tolerance)
CA Bi-Directional
F
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
Littelfuse Logo
Product Type
SERIES CODE
Packaging
Component
Package
Quantity
Packaging
Option
P4KExxxXX
DO-204AL
5000
Tape & Reel
P4KExxxXX-B
DO-204AL
500
BOX
Part Number
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Packaging Speciﬁcation
EIA STD RS-296E
Littelfuse Concord Packing Spec. DM-0016
69
P4KE Series
Transient Voltage Suppression Diodes
70
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 500W > SA series
RoHS
SA Series
Description
The SA Series is designed specifically to protect sensitive
electronic equipment from voltage transients induced by
lightning and other transient voltage events.
t 3P)4DPNQMJBOU
t 5ZQJDBMNBYJNVN
temperature coefﬁcient
Δ VBR = 0.1% × VBR@25°C
t (MBTTQBTTJWBUFEDIJQ
junction in DO-15 Package
t 8QFBLQVMTF
capability at 10×1000μs
waveform, repetition rate
(duty cycles):0.01%
t 'BTUSFTQPOTFUJNF
typically less than 1.0ps
from 0 Volts to BV min
t &YDFMMFOUDMBNQJOH
capability
t -PXJODSFNFOUBMTVSHF
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E128662/E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Symbol
Value
Unit
PPPM
500
W
PD
3.0
W
IFSM
70
A
VF
3.5/5.0
V
TJ , TSTG
-55 to 175
°C
Typical Thermal Resistance Junction
to Lead
RuJL
20
°C/W
Typical Thermal Resistance Junction
to Ambient
RuJA
75
°C/W
Peak Pulse Power Dissipation by
10x1000μs test waveform (Fig.1)
(Note 1)
Steady State Power Dissipation on
inﬁnite heat sink at TL=75ºC (Fig. 5)
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional
only (Note 2)
Maximum Instantaneous Forward
Voltage at 35A for Unidirectional
only (Note 3)
Operating Junction and Storage
Temperature Range
resistance
t 5ZQJDBM*R less than 1μA
above 13V
t )JHIUFNQFSBUVSF
soldering guaranteed:
260°C/40 seconds /
0.375”,(9.5mm) lead
length, 5 lbs., (2.3kg)
tension
t 1MBTUJDQBDLBHFIBT
Underwriters Laboratory
Flammability classiﬁcation
94V-O
t .BUUF5JO-FBEoGSFF
plated
Applications
TVS devices are ideal for the protection of I/O interfaces,
VCC bus and other vulnerable circuits used in telecom,
computer, industrial and consumer electronic applications.
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
3. VF<3.5V for devices of VBR <
_ 200V and VF<5.0V for devices of VBR >
_ 201V.
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
71
SA Series
SA Series
Features
Transient Voltage Suppression Diodes
Axial Leaded – 500W > SA series
Electrical Characteristics
Part
Number
(Uni)
Part
Number
(Bi)
Reverse
Stand off
Voltage
VR (V)
SA5.0A
SA6.0A
SA6.5A
SA7.0A
SA7.5A
SA8.0A
SA8.5A
SA9.0A
SA10A
SA11A
SA12A
SA13A
SA14A
SA15A
SA16A
SA17A
SA18A
SA20A
SA22A
SA24A
SA26A
SA28A
SA30A
SA33A
SA36A
SA40A
SA43A
SA45A
SA48A
SA51A
SA54A
SA58A
SA60A
SA64A
SA70A
SA75A
SA78A
SA85A
SA90A
SA100A
SA110A
SA120A
SA130A
SA150A
SA160A
SA170A
SA180A
SA5.0CA
SA6.0CA
SA6.5CA
SA7.0CA
SA7.5CA
SA8.0CA
SA8.5CA
SA9.0CA
SA10CA
SA11CA
SA12CA
SA13CA
SA14CA
SA15CA
SA16CA
SA17CA
SA18CA
SA20CA
SA22CA
SA24CA
SA26CA
SA28CA
SA30CA
SA33CA
SA36CA
SA40CA
SA43CA
SA45CA
SA48CA
SA51CA
SA54CA
SA58CA
SA60CA
SA64CA
SA70CA
SA75CA
SA78CA
SA85CA
SA90CA
SA100CA
SA110CA
SA120CA
SA130CA
SA150CA
SA160CA
SA170CA
SA180CA
5.0
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
20.0
22.0
24.0
26.0
28.0
30.0
33.0
36.0
40.0
43.0
45.0
48.0
51.0
54.0
58.0
60.0
64.0
70.0
75.0
78.0
85.0
90.0
100.0
110.0
120.0
130.0
150.0
160.0
170.0
180.0
MIN
MAX
Test
Current
IT
(mA)
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.00
11.10
12.20
13.30
14.40
15.60
16.70
17.80
18.90
20.00
22.20
24.40
26.70
28.90
31.10
33.30
36.70
40.00
44.40
47.80
50.00
53.30
56.70
60.00
64.40
66.70
71.10
77.80
83.30
86.70
94.40
100.00
111.00
122.00
133.00
144.00
167.00
178.00
189.00
200.00
7.00
7.37
7.98
8.60
9.21
9.83
10.40
11.10
12.30
13.50
14.70
15.90
17.20
18.50
19.70
20.90
22.10
24.50
26.90
29.50
31.90
34.40
36.80
40.60
44.20
49.10
52.80
55.30
58.90
62.70
66.30
71.20
73.70
78.60
86.00
92.10
95.80
104.00
111.00
123.00
135.00
147.00
159.00
185.00
197.00
209.00
233.00
10
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Breakdown Voltage
VBR (Volts) @ IT
Maximum
Clamping
Voltage
VC@ IPP
(V)
Maximum
Peak Pulse
Current Ipp
(A)
Maximum
Reverse
Leakage IR
@ VR
(μA)
9.2
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103.0
113.0
121.0
126.0
137.0
146.0
162.0
177.0
193.0
209.0
243.0
259.0
275.0
289.0
55.4
49.5
45.5
42.5
39.5
37.5
35.4
33.1
30.0
28.0
25.6
23.7
22.0
20.9
19.6
18.5
17.5
15.7
14.4
13.1
12.1
11.2
10.5
9.6
8.8
7.9
7.3
7.0
6.6
6.2
5.9
5.4
5.3
5.0
4.5
4.2
4.0
3.7
3.5
3.1
2.9
2.6
2.4
2.1
2.0
1.9
1.7
600
600
400
150
50
25
10
5
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Agency
Approval
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
For bidirectional type having VR of 10 volts and less, the IR limit is double.
For parts without A, the VBR is ± 10%.
SA Series
72
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 500W > SA series
Ratings and Characteristic Curves (T =25°C unless otherwise noted)
A
Figure 1 - Peak Pulse Power Rating Curve
100
30
Non-repetitive Pulse
Waveform Shown in Fig. 3
TA=25ûC
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage, %
PPPM- Peak Pulse Power (KW)
Figure 2 - Pulse Derating Curve
10
Exponential
P
1
P
P
Td
Td
Half SINE
Square
Td
0.1
01.μs
1.0μs
10μs
100μs
1.0ms
75
50
25
0
10ms
0
td- Pulse Width (sec.)
75
100 125 150
175 200
Figure 4 - Typical Junction Capacitance
10000
150
tr=10μsec
TJ=25°C
Pulse Width(td) is deﬁned
as the point where the peak
current decays to 50% of IPPM
Peak Value
IPPM
100
Bi-directional V=0V
Uni-directional V=0V
1000
Uni-directional @ VR
Cj (pF)
IPPM- Peak Pulse Current, % IRSM
50
TA- Ambient Temperature (ºC)
Figure 3 - Pulse Waveform
Half Value
IPPM IPPM
( )
2
100
Bi-directional @ VR
50
10/1000μsec. Waveform
as deﬁned by R.E.A
10
Tj=25C
f=1.0MHz
Vsig=50mVp-p
td
0
1.0
0
2.0
3.0
1
1.0
4.0
t-Time (ms)
100.0
1000.0
Figure 6 - Maximum Non-Repetitive Forward Surge
Current Uni-Directional Only
3.5
80
IFSM - Peak Forward Surge Current
(A)
3
2.5
2
1.5
1
10.0
VBR - Reverse Breakdown Voltage (V)
Figure 5 - Steady State Power Derating Curve
Steady State Power Dissipation (W)
25
L = 0.375” (9.5mm)
Lead Lengths
0.5
70
60
50
40
30
20
10
0
0
25
50
75
100
125
150
175
0
200
1
TL - Lead Temperature(ºC)
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
73
10
Number of Cycles at 60 Hz
100
SA Series
Transient Voltage Suppression Diodes
Axial Leaded – 500W > SA series
Soldering Parameters
Reﬂow Condition
-FBEoGSFFBTTFNCMZ
Pre Heat
Ramp-up
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
oTFDT
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
3°C/second max
Reﬂow
Critical Zone
TL to TP
TL
Temperature (T)
- Temperature Min (Ts(min))
tp
TP
tL
Ts(max)
Ramp-down
Ts(min)
ts
Preheat
25˚C
- Temperature (TL) (Liquidus)
217°C
- Time (min to max) (ts)
oTFDPOET
t 25˚C to Peak
Time (t)
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
oTFDPOET
Flow/Wave Soldering (Solder Dipping)
Ramp-down Rate
6°C/second max
Peak Temperature :
265OC
Time 25°C to peak Temperature (TP)
8 minutes Max.
Dipping Time :
10 seconds
Do not exceed
280°C
Soldering :
1 time
Physical Speciﬁcations
Environmental Speciﬁcations
Weight
0.015oz., 0.4g
Temperature Cycle
JESD22-A104
Case
JEDEC DO-204AC (DO-15) molded
plastic body over passivated junction.
Pressure Cooker
JESD 22-A102
Polarity
Color band denotes the cathode except
Bipolar.
High Temp. Storage
JESD22-A103
Terminal
Matte Tin axial leads, solderable per
JESD22-B102D.
HTRB
JESD22-A108
Thermal Shock
JESD22-A106
Dimensions
Dimensions
D
C
A
B
A
Inches
Millimeters
Min
Max
Min
Max
A
1.000
-
25.40
-
B
0.230
0.300
5.80
7.60
C
0.028
0.034
0.71
0.86
D
0.104
0.140
2.60
3.60
DO-204AC (DO-15)
SA Series
74
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 500W > SA series
Part Numbering System
Part Marking System
SAxxx XX X
Cathode Band
SAXXX
OPTION CODE:
BLANK Reel Tape
-B Bulk Packaging
TYPE CODE:
A Uni-Directional (5% Voltage Tolerance)
CA Bi-Directional
F
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
Littelfuse Logo
Product Type
SERIES CODE
Packaging
Component
Package
Quantity
Packaging
Option
SAxxxXX
DO-204AC
4000
Tape & Reel
SAxxxXX-B
DO-204AC
1000
Bulk
Part Number
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Packaging Speciﬁcation
EIA STD RS-296E
Littelfuse Concord Packing Spec. DM-0016
75
SA Series
Transient Voltage Suppression Diodes
76
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 500W > SAC series
RoHS
SAC Series
Description
The SAC Series is designed specifically to protect sensitive
electronic equipment from voltage transients induced by
lightning and other transient voltage events.
t 3P)4DPNQMJBOU
t (MBTTQBTTJWBUFEDIJQ
junction in DO-15
Package
t 8QFBLQVMTFQPXFS
capability at 10×1000μs
waveform, repetition rate
(duty cycles):0.01%
t 'BTUSFTQPOTFUJNF
typically less than 1.0ps
from 0 Volts to BV min
t &YDFMMFOUDMBNQJOH
capability
t -PXJODSFNFOUBMTVSHF
resistance
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Peak Pulse Power Dissipation by
10x1000μs test waveform (Fig.1)
(Note 1)
Steady State Power Dissipation on
inﬁnite heat sink at TL=75ºC (Fig. 5)
Operating Junction and Storage
Temperature Range
Symbol
Value
Unit
PPPM
500
W
PD
3.0
W
TJ , TSTG
-55 to 175
°C
t )JHIUFNQFSBUVSF
soldering guaranteed:
260°C/40 seconds /
0.375”,(9.5mm) lead
length, 5 lbs., (2.3kg)
tension
t 1MBTUJDQBDLBHFIBT
Underwriters Laboratory
Flammability classiﬁcation
94V-O
t .BUUF5JO-FBEoGSFF
plated
t *EFBMGPSEBUBMJOF
applications
Applications
TVS devices are ideal for the protection of I/O interfaces,
VCC bus and other vulnerable circuits used in telecom,
computer, industrial and consumer electronic applications.
Note:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
Electrical Characteristics
Part
Number
Reverse
Stand off
Voltage VR
(V)
SAC5.0
SAC6.0
SAC7.0
SAC8.0
SAC8.5
SAC10
SAC12
SAC15
SAC18
SAC22
SAC26
SAC30
SAC36
SAC45
SAC50
5.0
6.0
7.0
8.0
8.5
10.0
12.0
15.0
18.0
22.0
26.0
30.0
36.0
45.0
50.0
Breakdown Maximum Maximum Maximum Maximum
Peak
Junction
Voltage VBR Reverse Clamping
Pulse
Voltage at
Leakage
Current Capacitance
(V)
Ipp=5.0A
IR @ VR
@ 0 Volts
(Fig.3)
IPP (A)
MIN
(pF)
(μA)
VC (V)
7.60
7.90
8.33
8.89
9.44
11.10
13.30
16.70
20.00
24.40
28.90
33.30
40.00
50.00
55.50
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
300
300
300
100
50
5
1
1
1
1
1
1
1
1
1
10.0
11.2
12.6
13.4
14.0
16.3
19.0
23.6
28.8
35.4
42.3
48.6
60.0
77.0
88.0
44.0
41.0
38.0
36.0
34.0
29.0
25.0
20.0
15.0
14.0
11.1
10.0
8.6
6.8
5.8
77
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
Working
Inverse
Blocking
Voltage
VWIB (V)
Inverse
Blocking
Leakage
Current at
IIB @ VWIB
(mA)
Peak
Inverse
Blocking
Voltage
VPIB (V)
75
75
75
75
75
75
75
75
75
75
75
75
75
150
150
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
100
100
100
100
100
100
100
100
100
100
100
100
100
200
200
Agency
Approval
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
SAC Series
SAC Series
Features
Transient Voltage Suppression Diodes
Axial Leaded – 500W > SAC series
Ratings and Characteristic Curves (T =25°C unless otherwise noted)
A
Figure 1 - Peak Pulse Power Rating Curve
Figure 2 - Pulse Derating Curve
100
Percentage of Rated Power (%)
PPPM-Peak Pulse Power (kW)
1000
100
10
1
0.1
0.000001
Average Power
75
Peak Power
(Single Pulse)
50
25
0
0.00001
0.0001
0.001
0
td-Pulse Width (Sec.)
Figure 3 - Pulse Waveform
25
50
75
100
125
150
TL Lead Temperature (ºC)
175
Figure 4 - AC Line Protection Application
IPPM- Peak Pulse Current, % IRSM
150
tr=10μsec
TJ=25°C
Pulse Width(td) is deﬁned
as the point where the peak
current decays to 50% of IPPM
Peak Value
IPPM
100
Half Value
IPPM IPPM
( )
2
50
10/1000μsec. Waveform
as deﬁned by R.E.A
Low Capacitance
Application Note: Device must be used with two
units in parallel, opposite in polarity as shown in
circuit for AC signal line protection.
td
0
1.0
0
2.0
3.0
4.0
t-Time (ms)
Figure 5 - Steady State Power Derating Curve
Steady State Power dissipation (W)
3.5
3
2.5
2
1.5
1
0.5
0
0
25
50
75
100
125
150
175
200
TL-Lead Temperature (ºC)
SAC Series
78
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 500W > SAC series
Soldering Parameters
Reﬂow Condition
-FBEoGSFFBTTFNCMZ
tp
TP
Pre Heat
150°C
Ramp-up
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
oTFDT
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
3°C/second max
Reﬂow
Critical Zone
TL to TP
TL
- Temperature (TL) (Liquidus)
217°C
- Time (min to max) (ts)
oTFDPOET
Temperature (T)
- Temperature Min (Ts(min))
tL
Ts(max)
Ramp-down
Ts(min)
ts
Preheat
25˚C
t 25˚C to Peak
Time (t)
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
oTFDPOET
Flow/Wave Soldering (Solder Dipping)
Ramp-down Rate
6°C/second max
Peak Temperature :
265OC
Time 25°C to peak Temperature (TP)
8 minutes Max.
Dipping Time :
10 seconds
Do not exceed
280°C
Soldering :
1 time
Physical Speciﬁcations
Environmental Speciﬁcations
Weight
0.015oz., 0.4g
Temperature Cycle
JESD22-A104
Case
JEDEC DO-204AC (DO-15) molded
plastic body over passivated junction.
Pressure Cooker
JESD 22-A102
Polarity
Color band denotes the cathode except
Bipolar.
High Temp. Storage
JESD22-A103
Terminal
Matte Tin axial leads, solderable per
JESD22-B102D.
HTRB
JESD22-A108
Thermal Shock
JESD22-A106
Dimensions
D
Dimensions
C
A
B
A
Inches
Millimeters
Min
Max
Min
Max
A
1.000
-
25.40
-
B
0.230
0.300
5.80
7.60
C
0.028
0.034
0.71
0.86
D
0.104
0.140
2.60
3.60
DO-204AC (DO-15)
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
79
SAC Series
Transient Voltage Suppression Diodes
Axial Leaded – 500W > SAC series
Part Numbering System
Part Marking System
SAC xxx X
Cathode Band
SACXX
OPTION CODE:
BLANK Reel Tape
-B Bulk Packaging
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
SERIES CODE
F
Littelfuse Logo
Product Type
Packaging
Component
Package
Quantity
Packaging
Option
SACxxxXX
DO-204AC
4000
Tape & Reel
SACxxxXX-B
DO-204AC
1000
BULK
Part Number
Packaging Speciﬁcation
EIA STD RS-296E
Littelfuse Concord Packing Spec. DM-0016
Schematic
SAC Series
80
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 600W > P6KE series
RoHS
P6KE Series
Description
The P6KE Series is designed speciﬁcally to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
t 3P)4DPNQMJBOU
t 5ZQJDBMNBYJNVN
temperature coefﬁcient
Δ VBR = 0.1% × VBR@25°C
t (MBTTQBTTJWBUFEDIJQ
junction in DO-15 Package
t 8QFBLQVMTF
capability at 10×1000μs
waveform, repetition rate
(duty cycles):0.01%
t 'BTUSFTQPOTFUJNF
typically less than 1.0ps
from 0 Volts to BV min
t &YDFMMFOUDMBNQJOH
capability
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E128662/E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Symbol
Value
Unit
PPPM
600
W
PD
5.0
W
IFSM
100
A
VF
3.5/5.0
V
TJ , TSTG
-55 to 175
°C
Typical Thermal Resistance Junction
to Lead
RuJL
20
°C/W
Typical Thermal Resistance Junction
to Ambient
RuJA
75
°C/W
Peak Pulse Power Dissipation by
10x1000μs test waveform (Fig.1)
(Note 1)
Steady State Power Dissipation on
iniﬁnite heat sink at TL=75ºC (Fig. 5)
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional
only (Note 2)
Maximum Instantaneous Forward
Voltage at 50A for Unidirectional
only (Note 3)
Operating Junction and Storage
Temperature Range
t -PXJODSFNFOUBMTVSHF
resistance
t 5ZQJDBM*R less than 1μA
above 13V
t )JHIUFNQFSBUVSF
soldering guaranteed:
260°C/40 seconds /
0.375”,(9.5mm) lead
length, 5 lbs., (2.3kg)
tension
t 1MBTUJDQBDLBHFIBT
Underwriters Laboratory
Flammability classiﬁcation
94V-O
t .BUUF5JO-FBEoGSFF
plated
Applications
TVS devices are ideal for the protection of I/O interfaces,
VCC bus and other vulnerable circuits used in telecom,
computer, industrial and consumer electronic applications.
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
3. VF<3.5V for devices of VBR <
_ 200V and VF< 5.0V for devices of VBR >
_ 201V.
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
81
P6KE Series
P6KE Series
Features
Transient Voltage Suppression Diodes
Axial Leaded – 600W > P6KE series
Electrical Characteristics
Part
Number
(Uni)
Part
Number
(Bi)
Reverse
Stand off
Voltage VR
(Volts)
P6KE6.8A
P6KE7.5A
P6KE8.2A
P6KE9.1A
P6KE10A
P6KE11A
P6KE12A
P6KE13A
P6KE15A
P6KE16A
P6KE18A
P6KE20A
P6KE22A
P6KE24A
P6KE27A
P6KE30A
P6KE33A
P6KE36A
P6KE39A
P6KE43A
P6KE47A
P6KE51A
P6KE56A
P6KE62A
P6KE68A
P6KE75A
P6KE82A
P6KE91A
P6KE100A
P6KE110A
P6KE120A
P6KE130A
P6KE150A
P6KE160A
P6KE170A
P6KE180A
P6KE200A
P6KE220A
P6KE250A
P6KE300A
P6KE350A
P6KE400A
P6KE440A
P6KE480A
P6KE510A
P6KE530A
P6KE540A
P6KE550A
P6KE600A
P6KE6.8CA
P6KE7.5CA
P6KE8.2CA
P6KE9.1CA
P6KE10CA
P6KE11CA
P6KE12CA
P6KE13CA
P6KE15CA
P6KE16CA
P6KE18CA
P6KE20CA
P6KE22CA
P6KE24CA
P6KE27CA
P6KE30CA
P6KE33CA
P6KE36CA
P6KE39CA
P6KE43CA
P6KE47CA
P6KE51CA
P6KE56CA
P6KE62CA
P6KE68CA
P6KE75CA
P6KE82CA
P6KE91CA
P6KE100CA
P6KE110CA
P6KE120CA
P6KE130CA
P6KE150CA
P6KE160CA
P6KE170CA
P6KE180CA
P6KE200CA
P6KE220CA
P6KE250CA
P6KE300CA
P6KE350CA
P6KE400CA
P6KE440CA
P6KE480CA
P6KE510CA
P6KE530CA
P6KE540CA
P6KE550CA
P6KE600CA
5.80
6.40
7.02
7.78
8.55
9.40
10.20
11.10
12.80
13.60
15.30
17.10
18.80
20.50
23.10
25.60
28.20
30.80
33.30
36.80
40.20
43.60
47.80
53.00
58.10
64.10
70.10
77.80
85.50
94.00
102.00
111.00
128.00
136.00
145.00
154.00
171.00
185.00
214.00
256.00
300.00
342.00
376.00
408.00
434.00
477.00
486.00
495.00
512.00
Breakdown
Voltage VBR
(Volts) @ IT
MIN
MAX
Test
Current
IT
(mA)
6.45
7.13
7.79
8.65
9.50
10.50
11.40
12.40
14.30
15.20
17.10
19.00
20.90
22.80
25.70
28.50
31.40
34.20
37.10
40.90
44.70
48.50
53.20
58.90
64.60
71.30
77.90
86.50
95.00
105.00
114.00
124.00
143.00
152.00
162.00
171.00
190.00
209.00
237.00
285.00
332.00
380.00
418.00
456.00
485.00
503.50
513.00
522.50
570.00
7.14
7.88
8.61
9.55
10.50
11.60
12.60
13.70
15.80
16.80
18.90
21.00
23.10
25.20
28.40
31.50
34.70
37.80
41.00
45.20
49.40
53.60
58.80
65.10
71.40
78.80
86.10
95.50
105.00
116.00
126.00
137.00
158.00
168.00
179.00
189.00
210.00
231.00
263.00
315.00
368.00
420.00
462.00
504.00
535.00
556.50
567.00
577.50
630.00
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Maximum
Clamping
Voltage
VC @ Ipp
(V)
Maximum
Peak
Pulse
Current Ipp
(A)
Maximum
Reverse
Leakage
IR@ VR
(μA)
10.5
11.3
12.1
13.4
14.5
15.6
16.7
18.2
21.2
22.5
25.2
27.7
30.6
33.2
37.5
41.4
45.7
49.9
53.9
59.3
64.8
70.1
77.0
85.0
92.0
103.0
113.0
125.0
137.0
152.0
165.0
179.0
207.0
219.0
234.0
246.0
274.0
328.0
344.0
414.0
482.0
548.0
602.0
658.0
698.0
725.0
740.0
760.0
828.0
58.1
54.0
50.4
45.5
42.1
39.1
36.5
33.5
28.8
27.1
24.2
22.0
19.9
18.4
16.3
14.7
13.3
12.2
11.3
10.3
9.4
8.7
7.9
7.2
6.6
5.9
5.4
4.9
4.5
4.0
3.7
3.4
2.9
2.8
2.6
2.5
2.2
1.9
1.8
1.5
1.3
1.1
1.0
0.9
0.9
0.8
0.8
0.8
0.75
1000
500
200
50
10
5
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Agency
Approval
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
For bidirectional type having VR of 10 volts and less, the IR limit is double.
For parts without A , the VBR is ± 10% and VC is 5% higher than with A parts
P6KE Series
82
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 600W > P6KE series
Ratings and Characteristic Curves (T =25°C unless otherwise noted)
A
Figure 1 - Peak Pulse Power Rating
Figure 2 - Pulse Derating Curve
Non-repetitive Pulse
Waveform shown in Fig 3.
TA=25ûC
10
1
0.1
0.1μs
1.0μs
10μs
100μs
1.0ms
100
Peak Pulse Power (PPP) or Current (IPPM)
Derating in Percentage, %
PPPM- Peak Pulse Power (kW)
100
75
50
25
0
0
10ms
td- Pulse Width (sec.)
100 125 150
175 200
10000
tr=10μsec
TJ=25°C
Pulse Width(td) is deﬁned
as the point where the peak
current decays to 50% of IPPM
Peak Value
IPPM
100
Bi-directional V=0V
Uni-directional @VR
Half Value
IPPM IPPM
( )
2
50
100
10/1000μsec. Waveform
as deﬁned by R.E.A
Bi-directional @VR
10
Tj=25C
f=1.0MHz
Vsig=50mVp-p
td
1.0
0
Uni-directional V=0V
1000
Cj (pF)
IPPM- Peak Pulse Current, % IRSM
75
Figure 4 - Typical Junction Capacitance Uni-Directional
150
2.0
3.0
1
1.0
4.0
10.0
100.0
1000.0
VBR - Reverse Breakdown Voltage (V)
t-Time (ms)
Figure 6 - Maximum Non-Repetitive Forward Surge
Current
Figure 5 - Steady State Power Derating Curve
6
120
IFSM - Peak Forward Surge Current
(A)
Steady State Power Dissipation (W)
50
TA- Ambient Temperature (oC)
Figure 3 - Pulse Waveform
0
25
5
4
3
2
L = 0.375” (9.5mm)
Lead Lengths
1
0
0
25
50
75
100
125
150
175
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
80
60
40
20
0
200
1
TL-Lead Temperature(ºC)
©2008 Littelfuse, Inc.
100
10
100
Number of Cycles at 60 Hz
83
P6KE Series
Transient Voltage Suppression Diodes
Axial Leaded – 600W > P6KE series
Soldering Parameters
Reﬂow Condition
-FBEoGSFFBTTFNCMZ
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
Ramp-up
200°C
- Time (min to max) (ts)
oTFDT
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
3°C/second max
Reﬂow
Critical Zone
TL to TP
TL
Temperature (T)
Pre Heat
tp
TP
tL
Ts(max)
Ramp-down
Ts(min)
ts
Preheat
25˚C
- Temperature (TL) (Liquidus)
217°C
- Time (min to max) (ts)
oTFDPOET
t 25˚C to Peak
Time (t)
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
oTFDPOET
Flow/Wave Soldering (Solder Dipping)
Ramp-down Rate
6°C/second max
Peak Temperature :
265OC
Time 25°C to peak Temperature (TP)
8 minutes Max.
Dipping Time :
10 seconds
Do not exceed
280°C
Soldering :
1 time
Physical Speciﬁcations
Environmental Speciﬁcations
Weight
0.015oz., 0.4g
Temperature Cycle
JESD22-A104
Case
JEDEC DO-204AC (DO-15) molded
plastic body over passivated junction.
Pressure Cooker
JESD 22-A102
Polarity
Color band denotes the cathode except
Bipolar.
High Temp. Storage
JESD22-A103
Terminal
Matte Tin axial leads, solderable per
JESD22-B102D.
HTRB
JESD22-A108
Thermal Shock
JESD22-A106
Dimensions
Dimensions
D
C
A
B
A
Inches
Millimeters
Min
Max
Min
Max
A
1.000
-
25.40
-
B
0.230
0.300
5.80
7.60
C
0.028
0.034
0.71
0.86
D
0.104
0.140
2.60
3.60
DO-204AC (DO-15)
P6KE Series
84
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 600W > P6KE series
Part Numbering System
Part Marking System
P6KE xxx XX X
Cathode Band
P6KEXXX
OPTION CODE:
BLANK Reel Tape
-B Bulk Packaging
TYPE CODE:
A Uni-Directional (5% Voltage Tolerance)
CA Bi-Directional
F
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
Littelfuse Logo
Product Type
SERIES CODE
Packaging
Component
Package
Quantity
Packaging
Option
P6KExxxXX
DO-204AC
4000
Tape & Reel
P6KExxxXX-B
DO-204AC
1000
BULK
Part Number
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Packaging Speciﬁcation
EIA STD RS-296E
Littelfuse Concord Packing Spec. DM-0016
85
P6KE Series
Transient Voltage Suppression Diodes
86
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 1500W > 1.5KE series
RoHS
1.5KE Series
Description
The 1.5KE Series is designed speciﬁcally to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
t 3P)4DPNQMJBOU
t 5ZQJDBMNBYJNVN
temperature coefﬁcient
Δ VBR = 0.1% × VBR@25°C
t (MBTTQBTTJWBUFEDIJQ
junction in DO-201
Package
t 8QFBLQVMTF
capability at 10×1000μs
waveform, repetition rate
(duty cycles):0.01%
t 'BTUSFTQPOTFUJNF
typically less than 1.0ps
from 0 Volts to BV min
t &YDFMMFOUDMBNQJOH
capability
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E128662/E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Symbol
Value
Unit
PPPM
1500
W
PD
6.5
W
IFSM
200
A
VF
3.5/5.0
V
TJ , TSTG
-55 to 175
°C
Typical Thermal Resistance Junction
to Lead
RuJL
15
°C/W
Typical Thermal Resistance Junction
to Ambient
RuJA
75
°C/W
Peak Pulse Power Dissipation by
10x1000μs test waveform (Fig.1)
(Note 1)
Steady State Power Dissipation on
iniﬁnite heat sink at TL=75ºC (Fig. 5)
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional
only (Note 2)
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
only (Note 3)
Operating Junction and Storage
Temperature Range
t -PXJODSFNFOUBMTVSHF
resistance
t 5ZQJDBM*R less than 1μA
above 13V
t )JHIUFNQFSBUVSF
soldering guaranteed:
260°C/40 seconds /
0.375”,(9.5mm) lead
length, 5 lbs., (2.3kg)
tension
t 1MBTUJDQBDLBHFIBT
Underwriters Laboratory
Flammability classiﬁcation
94V-O
t .BUUF5JO-FBEoGSFF
plated
Applications
TVS devices are ideal for the protection of I/O interfaces,
VCC bus and other vulnerable circuits used in telecom,
computer, industrial and consumer electronic applications.
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
3. VF<3.5V for devices of VBR <
_ 200V and VF<5.0V for devices of VBR >
_ 201V.
©2008 Littelfuse, Inc.
Speciﬁcations
Speciﬁcations are
are subject
subject to
to change
change without
without notice.
notice.
Please refer to www.littelfuse.com/series/1.5KE.html
http://www.littelfuse.com for current information.
for the most current information
87
1.5KE Series
1.5KE Series
Features
Transient Voltage Suppression Diodes
Axial Leaded – 1500W > 1.5KE series
Electrical Characteristics
Part
Number
(Uni)
Part
Number
(Bi)
Reverse
Stand off
Voltage VR
(Volts)
1.5KE6.8A
1.5KE7.5A
1.5KE8.2A
1.5KE9.1A
1.5KE10A
1.5KE11A
1.5KE12A
1.5KE13A
1.5KE15A
1.5KE16A
1.5KE18A
1.5KE20A
1.5KE22A
1.5KE24A
1.5KE27A
1.5KE30A
1.5KE33A
1.5KE36A
1.5KE39A
1.5KE43A
1.5KE47A
1.5KE51A
1.5KE56A
1.5KE62A
1.5KE68A
1.5KE75A
1.5KE82A
1.5KE91A
1.5KE100A
1.5KE110A
1.5KE120A
1.5KE130A
1.5KE150A
1.5KE160A
1.5KE170A
1.5KE180A
1.5KE200A
1.5KE220A
1.5KE250A
1.5KE300A
1.5KE350A
1.5KE400A
1.5KE440A
1.5KE480A
1.5KE510A
1.5KE530A
1.5KE540A
1.5KE550A
1.5KE6.8CA
1.5KE7.5CA
1.5KE8.2CA
1.5KE9.1CA
1.5KE10CA
1.5KE11CA
1.5KE12CA
1.5KE13CA
1.5KE15CA
1.5KE16CA
1.5KE18CA
1.5KE20CA
1.5KE22CA
1.5KE24CA
1.5KE27CA
1.5KE30CA
1.5KE33CA
1.5KE36CA
1.5KE39CA
1.5KE43CA
1.5KE47CA
1.5KE51CA
1.5KE56CA
1.5KE62CA
1.5KE68CA
1.5KE75CA
1.5KE82CA
1.5KE91CA
1.5KE100CA
1.5KE110CA
1.5KE120CA
1.5KE130CA
1.5KE150CA
1.5KE160CA
1.5KE170CA
1.5KE180CA
1.5KE200CA
1.5KE220CA
1.5KE250CA
1.5KE300CA
1.5KE350CA
1.5KE400CA
1.5KE440CA
1.5KE480CA
1.5KE510CA
1.5KE530CA
1.5KE540CA
1.5KE550CA
5.80
6.40
7.02
7.78
8.55
9.40
10.20
11.10
12.80
13.60
15.30
17.10
18.80
20.50
23.10
25.60
28.20
30.80
33.30
36.80
40.20
43.60
47.80
53.00
58.10
64.10
70.10
77.80
85.50
94.00
102.00
111.00
128.00
136.00
145.00
154.00
171.00
185.00
214.00
256.00
300.00
342.00
376.00
408.00
434.00
477.00
459.00
495.00
Breakdown Voltage
VBR (Volts) @ IT
MIN
MAX
6.45
7.13
7.79
8.65
9.50
10.50
11.40
12.40
14.30
15.20
17.10
19.00
20.90
22.80
25.70
28.50
31.40
34.20
37.10
40.90
44.70
48.50
53.20
58.90
64.60
71.30
77.90
86.50
95.00
105.00
114.00
124.00
143.00
152.00
162.00
171.00
190.00
209.00
237.00
285.00
332.00
380.00
418.00
456.00
485.00
503.50
513.00
522.50
7.14
7.88
8.61
9.50
10.50
11.60
12.60
13.70
15.80
16.80
18.90
21.00
23.10
25.20
28.40
31.50
34.70
37.80
41.00
45.20
49.40
53.60
58.80
65.10
71.40
78.80
86.10
95.50
105.00
116.00
126.00
137.00
158.00
168.00
179.00
189.00
210.00
231.00
263.00
315.00
368.00
420.00
462.00
504.00
535.00
556.50
567.00
577.50
Test
Current
IT (mA)
Maximum
Clamping
Voltage
VC @ Ipp
(Volts)
Maximum
Peak Pulse
Current Ipp
(A)
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10.5
11.3
12.1
13.4
14.5
15.6
16.7
18.2
21.2
22.5
25.2
27.7
30.6
33.2
37.5
41.4
45.7
49.9
53.9
59.3
64.8
70.1
77.0
85.0
92.0
103.0
113.0
125.0
137.0
152.0
165.0
179.0
207.0
219.0
234.0
246.0
274.0
328.0
344.0
414.0
482.0
548.0
602.0
658.0
698.0
725.0
740.0
760.0
144.8
134.5
125.6
113.4
104.8
97.4
91.0
83.5
71.7
67.6
60.3
54.9
49.7
45.8
40.5
36.7
33.3
30.5
28.2
25.6
23.5
21.7
19.7
17.9
16.5
14.8
13.5
12.2
11.1
10.0
9.2
8.5
7.3
6.9
6.5
6.2
5.5
4.6
4.4
3.7
3.2
2.8
2.5
2.3
2.1
2.1
2.0
2.0
Maximum
Agency
Reverse
Approval
Leakage IR @
VR (μA)
1000
500
200
50
10
5
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
For bidirectional type having VR of 10 volts and less, the IR limit is double.
For parts without A, the VBR is +10% and VC is 5% higher than with A parts.
1.5KE Series
88
©2008 Littelfuse, Inc.
Speciﬁcations are
are subject
subject to
to change
change without
without notice.
Speciﬁcations
notice.
refer to www.littelfuse.com
/series/1.5KE.html
Please referPlease
to http://www.littelfuse.com
for current
information.
for the most current information
Transient Voltage Suppression Diodes
Axial Leaded – 1500W > 1.5KE series
Ratings and Characteristic Curves (T =25°C unless otherwise noted)
A
Figure 1 - Peak Pulse Power Rating Curve
Figure 2 - Pulse Derating Curve
100
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage %
PPPM-Peak Pulse Power (kW)
1000
100
10
1
75
50
25
0
0.1
0.000001
0.00001
0.0001
0
0.001
td-Pulse Width (Sec.)
100
125 150
175
200
100000
tr=10μsec
TJ=25°C
Pulse Width(td) is deﬁned
as the point where the peak
current decays to 50% of IPPM
Peak Value
IPPM
100
Bi-directional V=0V
10000
Uni-directional V=0V
Cj (pF)
IPPM- Peak Pulse Current, % IRSM
75
Figure 4 - Typical Junction Capacitance
150
Half Value
IPPM IPPM
( )
1000
Uni-directional @ VR
100
2
Bi-directional @ VR
50
10/1000μsec. Waveform
as deﬁned by R.E.A
10
td
1.0
0
2.0
3.0
Tj=25C
f=1.0MHz
Vsig=50mVp-p
1
1.0
4.0
100.0
1000.0
Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional Only
Figure 5 - Steady State Power Derating Curve
6.5
6
5.5
5
4.5
4
3.5
3
2.5
2
1.5
1
0.5
0
10.0
VBR - Reverse Breakdown Voltage (V)
t-Time (ms)
200
IFSM - Peak Forward Surge Current (A)
Steady State Power Dissipation (W)
50
TA-Ambient Temperature (ºC)
Figure 3 - Pulse Waveform
0
25
L = 0.375” (9.5mm)
Lead Lengths
0
25
50
75
100
125
150
175
©2008 Littelfuse, Inc.
160
140
120
100
80
60
40
20
0
200
1
TL - Lead Temperature(ºC)
Speciﬁcations
Speciﬁcations are
are subject
subject to
to change
change without
without notice.
notice.
Please refer to www.littelfuse.com/series/1.5KE.html
http://www.littelfuse.com for current information.
for the most current information
180
89
10
Number of Cycles at 60 Hz
100
1.5KE Series
Transient Voltage Suppression Diodes
Axial Leaded – 1500W > 1.5KE series
Soldering Parameters
Reﬂow Condition
-FBEoGSFFBTTFNCMZ
tp
TP
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
oTFDT
Ramp-up
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
3°C/second max
Reﬂow
Critical Zone
TL to TP
TL
- Temperature (TL) (Liquidus)
217°C
- Time (min to max) (ts)
oTFDPOET
Temperature (T)
Pre Heat
- Temperature Min (Ts(min))
tL
Ts(max)
Ramp-down
Ts(min)
ts
Preheat
25˚C
t 25˚C to Peak
Time (t)
Peak Temperature (TP)
260
Time within 5°C of actual peak
Temperature (tp)
oTFDPOET
Flow/Wave Soldering (Solder Dipping)
Ramp-down Rate
6°C/second max
Peak Temperature :
265OC
Time 25°C to peak Temperature (TP)
8 minutes Max.
Dipping Time :
10 seconds
Do not exceed
280°C
Soldering :
1 time
+0/-5
°C
Physical Speciﬁcations
Environmental Speciﬁcations
Weight
0.045oz., 1.2g
Temperature Cycle
JESD22-A104
Case
JEDEC DO-201 molded plastic body over
passivated junction.
Pressure Cooker
JESD 22-A102
Polarity
Color band denotes the cathode except
Bipolar.
High Temp. Storage
JESD22-A103
Terminal
Matte Tin axial leads, solderable per
JESD22-B102D.
HTRB
JESD22-A108
Thermal Shock
JESD22-A106
Dimensions
Dimensions
D
C
A
B
A
Inches
Millimeters
Min
Max
Min
Max
A
1.000
-
25.40
-
B
0.285
0.375
7.20
9.50
C
0.038
0.042
0.96
1.07
D
0.190
0.210
4.80
5.30
DO-201
1.5KE Series
90
©2008 Littelfuse, Inc.
Speciﬁcations are
are subject
subject to
to change
change without
without notice.
Speciﬁcations
notice.
refer to www.littelfuse.com
/series/1.5KE.html
Please referPlease
to http://www.littelfuse.com
for current
information.
for the most current information
Transient Voltage Suppression Diodes
Axial Leaded – 1500W > 1.5KE series
Part Numbering System
Part Marking System
1.5KE xxx XX X
Cathode Band
1.5KEXXX
OPTION CODE:
BLANK Reel Tape
-B Bulk Packaging
TYPE CODE:
A Uni-Directional (5% Voltage Tolerance)
CA Bi-Directional
F
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
Littelfuse Logo
Product Type
SERIES CODE
Packaging
Component
Package
Quantity
Packaging
Option
1.5KExxxXX
DO-201
1200
Tape & Reel
1.5KExxxXX-B
DO-201
500
BULK
Part Number
©2008 Littelfuse, Inc.
Speciﬁcations
Speciﬁcations are
are subject
subject to
to change
change without
without notice.
notice.
Please refer to www.littelfuse.com/series/1.5KE.html
http://www.littelfuse.com for current information.
for the most current information
Packaging Speciﬁcation
EIA STD RS-296E
Littelfuse Concord Packing Spec. DM-0016
91
1.5KE Series
Transient Voltage Suppression Diodes
92
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 1500W > LCE series
RoHS
LCE Series
Description
The LCE Series is designed specifically to protect sensitive
electronic equipment from voltage transients induced by
lightning and other transient voltage events.
t 3P)4DPNQMJBOU
t (MBTTQBTTJWBUFEDIJQ
junction in DO-201
Package
t 8QFBLQVMTFQPXFS
capability at 10×1000μs
waveform, repetition rate
(duty cycles):0.01%
t 'BTUSFTQPOTFUJNF
typically less than 1.0ps
from 0 Volts to BV min
t &YDFMMFOUDMBNQJOH
capability
t -PXJODSFNFOUBMTVSHF
resistance
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E128662/E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Peak Pulse Power Dissipation by
10x1000μs test waveform (Fig.1)
(Note 1)
Steady State Power Dissipation on
inﬁnite heat sink at TL=75ºC (Fig. 5)
Operating Junction and Storage
Temperature Range
t )JHIUFNQFSBUVSF
soldering guaranteed:
260°C/40 seconds /
0.375”,(9.5mm) lead
length, 5 lbs., (2.3kg)
tension
t 1MBTUJDQBDLBHFIBT
Underwriters Laboratory
Flammability classiﬁcation
94V-O
t .BUUF5JO-FBEoGSFF
plated
t *EFBMGPSEBUBMJOF
applications
Symbol
Value
Unit
PPPM
1500
W
Applications
PD
6.5
W
TVS devices are ideal for the protection of I/O interfaces,
VCC bus and other vulnerable circuits used in telecom,
computer, industrial and consumer electronic applications.
TJ , TSTG
-55 to 175
°C
Note:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
93
LCE Series
LCE Series
Features
Transient Voltage Suppression Diodes
Axial Leaded – 1500W > LCE series
Electrical Characteristics
Inverse
Maximum Maximum Maximum Maximum Working
Peak
Reverse Breakdown
Agency
Test
Peak
Blocking
Clamping
Reverse
Junction
Inverse Approval
Inverse
Pulse
Leakage
Stand off Voltage VBR Current Leakage
Part
Voltage
Blocking
Capacitance
Blocking
Current
Current at
(V)
Number Voltage
IT
at Ipp
Voltage
Voltage
(Fig.3)
IIB @ VWIB
IR @ VR
@ 0 Volts
(mA)
VR (V)
IPPM (A)
VC (V)
VPIB (V)
VWIB (V)
MIN MAX
(pF)
(mA)
(μA)
LCE6.5A
LCE7.0A
LCE7.5A
LCE8.0A
LCE8.5A
LCE9.0A
LCE10A
LCE11A
LCE12A
LCE13A
LCE14A
LCE15A
LCE16A
LCE17A
LCE18A
LCE20A
LCE22A
LCE24A
LCE26A
LCE28A
LCE30A
LCE33A
LCE36A
LCE40A
LCE43A
LCE45A
LCE48A
LCE51A
LCE54A
LCE58A
LCE60A
LCE64A
LCE70A
LCE75A
LCE85A
LCE90A
6.5
7.0
7.5
8.0
8.5
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
20.0
22.0
24.0
26.0
28.0
30.0
33.0
36.0
40.0
43.0
45.0
48.0
51.0
54.0
58.0
60.0
64.0
70.0
75.0
85.0
90.0
7.22
7.78
8.33
8.89
9.44
10.00
11.10
12.20
13.30
14.40
15.60
16.70
17.80
18.90
20.00
22.20
24.40
26.70
28.90
31.10
33.30
36.70
40.00
44.40
47.80
50.00
53.30
56.70
60.00
64.40
66.70
71.10
77.80
83.30
94.40
100.00
7.98
8.60
9.21
9.83
10.40
11.10
12.30
13.50
14.70
15.90
17.20
18.50
19.70
20.90
22.10
24.50
26.90
29.50
31.90
34.40
36.80
40.60
44.20
49.10
52.80
55.30
58.90
62.70
66.30
71.20
73.70
78.60
86.00
92.10
104.00
111.00
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1000
500
250
100
50
10
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.5
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103.0
113.0
121.0
129.0
146.0
100.0
100.0
100.0
100.0
100.0
97.0
88.0
82.0
75.0
70.0
65.0
61.0
57.0
54.0
51.0
46.0
42.0
39.0
36.0
33.0
31.0
28.1
25.8
23.3
21.6
20.6
19.4
18.2
17.2
16.0
15.5
14.6
13.3
12.4
11.6
10.3
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
100
100
100
100
125
125
125
125
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
125
125
125
125
150
150
150
150
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Note: For parts without A, the VBR is ± 10%.
LCE Series
94
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 1500W > LCE series
Ratings and Characteristic Curves (T =25°C unless otherwise noted)
A
Figure 1 - Peak Pulse Power Rating
Figure 2 - Power Derating Curve
100
Percentage of Rated Power (%)
PPPM - Peak Pulse Power (kW)
1000
100
10
1
Average Power
75
50
Peak Power
(Single Pulse)
25
0
0.1
0.000001
0.00001
0.0001
0
0.001
td-Pluse Width (Sec.)
25
50
75
100
125
150
175
TL-Lead Temperature (ºC)
Figure 3 - Pulse Waveform
Figure 4 - AC Line Protection Application
IPPM- Peak Pulse Current, % IRSM
150
tr=10μsec
TJ=25°C
Pulse Width(td) is deﬁned
as the point where the peak
current decays to 50% of IPPM
Peak Value
IPPM
100
+
Half Value
IPPM IPPM
( )
2
50
0
+
10/1000μsec. Waveform
as deﬁned by R.E.A
Low Capacitance
TVC
td
1.0
0
2.0
3.0
Application Note: Device must be used
with two units in parrellel, opposite in polarity
as shown on circuit for AC signal lin
protection.
4.0
t-Time (ms)
Steady State Power Dissipation (W)
Figure 5 - Steady State Power Derating Curve
6.5
6
5.5
5
4.5
4
3.5
3
2.5
2
1.5
1
0.5
0
0
25
50
75
100 125
150 175
200
TL-Lead Temperature (ºC)
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
95
LCE Series
Transient Voltage Suppression Diodes
Axial Leaded – 1500W > LCE series
Soldering Parameters
Reﬂow Condition
-FBEoGSFFBTTFNCMZ
tp
TP
- Temperature Min (Ts(min))
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
oTFDT
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
Reﬂow
Ramp-up
Critical Zone
TL to TP
TL
Temperature (T)
Pre Heat
150°C
tL
Ts(max)
Ramp-down
Ts(min)
ts
Preheat
3°C/second max
25˚C
- Temperature (TL) (Liquidus)
217°C
- Time (min to max) (ts)
oTFDPOET
t 25˚C to Peak
Time (t)
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
oTFDPOET
Flow/Wave Soldering (Solder Dipping)
Ramp-down Rate
6°C/second max
Peak Temperature :
265OC
Time 25°C to peak Temperature (TP)
8 minutes Max.
Dipping Time :
10 seconds
Do not exceed
280°C
Soldering :
1 time
Physical Speciﬁcations
Environmental Speciﬁcations
Weight
0.045oz., 1.2g
Temperature Cycle
JESD22-A104
Case
JEDEC DO-201 molded plastic body over
passivated junction.
Pressure Cooker
JESD 22-A102
Polarity
Color band denotes the cathode except
Bipolar.
High Temp. Storage
JESD22-A103
Terminal
Matte Tin axial leads, solderable per
JESD22-B102D.
HTRB
JESD22-A108
Thermal Shock
JESD22-A106
Dimensions
D
Dimensions
C
A
B
A
Inches
Min
Millimeters
Max
Min
Max
A
1.000
-
25.40
-
B
0.285
0.375
7.20
9.50
C
0.038
0.042
0.96
1.07
D
0.190
0.210
4.80
5.30
DO-201
LCE Series
96
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 1500W > LCE series
Part Numbering System
Part Marking System
LCE xxx A X
Cathode Band
XXX
OPTION CODE:
BLANK Reel Tape
-B Bulk Packaging
TYPE CODE:
A Uni-Directional (5% Voltage Tolerance)
F
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
SERIES CODE
Littelfuse Logo
Product Type
Packaging
Component
Package
Quantity
Packaging
Option
LCExxxXX
DO-201
1200
Tape & Reel
LCExxxXX-B
DO-201
500
BULK
Part Number
Packaging Speciﬁcation
EIA STD RS-296E
Littelfuse Concord Packing Spec. DM-0016
Schematic
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
97
LCE Series
Transient Voltage Suppression Diodes
98
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 3000W > 3KP series
RoHS
3KP Series
Description
The 3KP Series is designed speciﬁcally to protect sensitive
electronic equipment from voltage transients induced by
lightning and other transient voltage events.
t 3P)4DPNQMJBOU
t 5ZQJDBMNBYJNVN
temperature coefﬁcient
Δ VBR = 0.1% × VBR@25°C
t (MBTTQBTTJWBUFEDIJQ
junction in P600 package
t 8QFBLQVMTF
capability at 10×1000μs
waveform, repetition rate
(duty cycles):0.01%
t 'BTUSFTQPOTFUJNF
typically less than 1.0ps
from 0 Volts to BV min
t &YDFMMFOUDMBNQJOH
capability
t -PXJODSFNFOUBMTVSHF
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
resistance
t 5ZQJDBM*R less than 2μA
above 12V
t )JHIUFNQFSBUVSF
soldering guaranteed:
260°C/40 seconds /
0.375”, (9.5mm) lead
length, 5 lbs., (2.3kg)
tension
t 1MBTUJDQBDLBHFIBT
Underwriters Laboratory
Flammability classiﬁcation
94V-O
t .BUUF5JO-FBEoGSFF
plated
Symbol
Value
Unit
PPPM
3000
W
Applications
PD
7.0
W
TVS devices are ideal for the protection of I/O interfaces,
VCC bus and other vulnerable circuits used in telecom,
computer, industrial and consumer electronic applications.
IFSM
300
A
VF
3.5/5.0
V
TJ , TSTG
-55 to 175
°C
Typical Thermal Resistance Junction
to Lead
RuJL
8.0
°C/W
Typical Thermal Resistance Junction
to Ambient
RuJA
40
°C/W
Peak Pulse Power Dissipation by
10x1000μs test waveform (Fig.1)
(Note 1)
Steady State Power Dissipation on
iniﬁnite heat sink at TL=75ºC (Fig. 5)
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional
only (Note 2)
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
only (Note 3)
Operating Junction and Storage
Temperature Range
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
3. VF<3.5V for devices of VBR <
_ 200V and VF<5.0V for devices of VBR >
_ 201V.
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
99
3KP Series
3KP Series
Features
Transient Voltage Suppression Diodes
Axial Leaded – 3000W > 3KP series
Electrical Characteristics
MAX
Test
Current
IT
(mA)
Maximum
Clamping
Voltage
VC @ IPP
(V)
Maximum
Peak
Pulse
Current IPP
(A)
Maximum
Reverse
Leakage
IR@ VR
(μ A)
7.00
7.37
7.98
8.60
9.21
9.83
10.40
11.10
12.30
13.50
14.70
15.90
17.20
18.50
19.70
20.90
22.10
24.50
26.90
29.50
31.90
34.40
36.80
40.60
44.20
49.10
52.80
55.30
58.90
62.70
66.30
71.20
73.70
78.60
86.00
92.10
95.80
104.00
111.00
123.00
135.00
147.00
159.00
185.00
197.00
209.00
221.00
233.00
246.00
258.00
50
50
50
50
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
9.2
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103.0
113.0
121.0
126.0
137.0
146.0
162.0
177.0
193.0
209.0
243.0
259.0
275.0
289.0
310.0
329.2
349.5
326.1
291.3
267.9
250.0
232.6
220.6
208.3
194.8
176.5
164.8
150.8
139.5
129.3
123.0
115.4
108.7
102.7
92.6
84.5
77.1
71.3
66.1
62.0
56.3
51.6
46.5
43.2
41.3
38.8
36.4
34.4
32.1
31.0
29.1
26.5
24.8
23.8
21.9
20.5
18.5
16.9
15.5
14.4
12.3
11.6
10.9
10.4
9.7
9.1
8.6
5000
5000
2000
1000
250
150
50
20
15
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
270.00
5
371.1
8.1
2
X
Breakdown
Voltage VBR
(Volts) @ IT
Part
Number
(Uni)
Part
Number
(Bi)
Reverse
Stand off
Voltage VR
(Volts)
MIN
3KP5.0A
3KP6.0A
3KP6.5A
3KP7.0A
3KP7.5A
3KP8.0A
3KP8.5A
3KP9.0A
3KP10A
3KP11A
3KP12A
3KP13A
3KP14A
3KP15A
3KP16A
3KP17A
3KP18A
3KP20A
3KP22A
3KP24A
3KP26A
3KP28A
3KP30A
3KP33A
3KP36A
3KP40A
3KP43A
3KP45A
3KP48A
3KP51A
3KP54A
3KP58A
3KP60A
3KP64A
3KP70A
3KP75A
3KP78A
3KP85A
3KP90A
3KP100A
3KP110A
3KP120A
3KP130A
3KP150A
3KP160A
3KP170A
3KP180A
3KP190A
3KP200A
3KP210A
3KP220A
3KP5.0CA
3KP6.0CA
3KP6.5CA
3KP7.0CA
3KP7.5CA
3KP8.0CA
3KP8.5CA
3KP9.0CA
3KP10CA
3KP11CA
3KP12CA
3KP13CA
3KP14CA
3KP15CA
3KP16CA
3KP17CA
3KP18CA
3KP20CA
3KP22CA
3KP24CA
3KP26CA
3KP28CA
3KP30CA
3KP33CA
3KP36CA
3KP40CA
3KP43CA
3KP45CA
3KP48CA
3KP51CA
3KP54CA
3KP58CA
3KP60CA
3KP64CA
3KP70CA
3KP75CA
3KP78CA
3KP85CA
3KP90CA
3KP100CA
3KP110CA
3KP120CA
3KP130CA
3KP150CA
3KP160CA
3KP170CA
3KP180CA
3KP190CA
3KP200CA
3KP210CA
5.0
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
20.0
22.0
24.0
26.0
28.0
30.0
33.0
36.0
40.0
43.0
45.0
48.0
51.0
54.0
58.0
60.0
64.0
70.0
75.0
78.0
85.0
90.0
100.0
110.0
120.0
130.0
150.0
160.0
170.0
180.0
190.0
200.0
210.0
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.00
11.10
12.20
13.30
14.40
15.60
16.70
17.80
18.90
20.00
22.20
24.40
26.70
28.90
31.10
33.30
36.70
40.00
44.40
47.80
50.00
53.30
56.70
60.00
64.40
66.70
71.10
77.80
83.30
86.70
94.40
100.00
111.00
122.00
133.00
144.00
167.00
178.00
189.00
200.00
211.00
222.00
233.00
3KP220CA
220.0
244.00
Agency
Approval
For parts without A , the VBR is ± 10% and VC is 5% higher than with A parts
For bidirectional type having VR of 10 volts and less, the IR limit is double.
3KP Series
100
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 3000W > 3KP series
Ratings and Characteristic Curves (T =25°C unless otherwise noted)
A
Figure 1 - Peak Pulse Power Rating Curve
Figure 2 - Pulse Derating Curve
100
Peak Pulse Power (PPP) or Current
(IPP) Derating in Percentage %
PPPM-Peak Pulse Power (KW)
1000
100
10
1
0.1
0.000001
0.00001
0.0001
80
60
40
20
0
0
0.001
25
75
100
125
150
175
200
TA-Ambient temperature (ºC)
td-Pulse Width (Sec.)
Figure 3 - Pulse Waveform
Figure 4 - Typical Junction Capacitance
1000000
150
tr=10μsec
TJ=25°C
Pulse Width(td) is deﬁned
as the point where the peak
current decays to 50% of IPPM
Peak Value
IPPM
100
Bi-directional V= OV
10000
Uni-directional V= OV
Cj (Pf)
IPPM- Peak Pulse Current, % IRSM
50
Half Value
IPPM IPPM
( )
Uni-directional @ VR
2
50
0
100
10/1000μsec. Waveform
as deﬁned by R.E.A
Bi-directional @ VR
td
1
1.0
0
2.0
3.0
1.0
4.0
t-Time (ms)
10.0
100.0
1000.0
VBR - Reverse Breakdown Voltage (V)
Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current
Figure 5 - Steady State Power Derating Curve
350
7
IFSM Peak Forward Surge Current (A)
Steady State Power Dissipation (W)
8
6
5
4
L = 0.375” (9.5mm)
Lead Lengths
3
2
1
0
0
25
50
75 100 125 150 175
TL-Lead Temperature (ºC)
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
300
250
200
150
100
50
0
200
1
101
10
Number of Cycles at 60 Hz
100
3KP Series
Transient Voltage Suppression Diodes
Axial Leaded – 3000W > 3KP series
Soldering Parameters
Reﬂow Condition
-FBEoGSFFBTTFNCMZ
tp
TP
- Temperature Min (Ts(min))
- Temperature Max (Ts(max))
Ramp-up
200°C
- Time (min to max) (ts)
oTFDT
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
3°C/second max
Reﬂow
Critical Zone
TL to TP
TL
Temperature (T)
Pre Heat
150°C
tL
Ts(max)
Ramp-down
Ts(min)
ts
Preheat
25˚C
- Temperature (TL) (Liquidus)
217°C
- Time (min to max) (ts)
oTFDPOET
t 25˚C to Peak
Time (t)
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
oTFDPOET
Flow/Wave Soldering (Solder Dipping)
Ramp-down Rate
6°C/second max
Peak Temperature :
265OC
Time 25°C to peak Temperature (TP)
8 minutes Max.
Dipping Time :
10 seconds
280°C
Soldering :
1 time
Do not exceed
Physical Speciﬁcations
Environmental Speciﬁcations
Weight
0.07oz., 2.1g
Temperature Cycle
JESD22-A104
Case
P600 molded plastic body over
passivated junction.
Pressure Cooker
JESD 22-A102
Polarity
Color band denotes the cathode except
Bipolar.
High Temp. Storage
JESD22-A103
Terminal
Matte Tin axial leads, solderable per
JESD22-B102D.
HTRB
JESD22-A108
Thermal Shock
JESD22-A106
Dimensions
D
Dimensions
C
A
B
A
Inches
Millimeters
Min
Max
Min
Max
A
1.000
-
25.40
-
B
0.340
0.360
8.60
9.10
C
0.048
0.052
1.22
1.32
D
0.340
0.360
8.60
9.10
P600
3KP Series
102
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 3000W > 3KP series
Part Numbering System
Part Marking System
3KPxxx XX X
Cathode Band
3KPXXX
OPTION CODE:
BLANK Reel Tape
-B Bulk Packaging
TYPE CODE:
A Uni-Directional (5% Voltage Tolerance)
CA Bi-Directional
F
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
Littelfuse Logo
Product Type
SERIES CODE
Packaging
Component
Package
Quantity
Packaging
Option
3KPxxxXX
P600
800
Tape & Reel
3KPxxxXX-B
P600
500
BULK
Part Number
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Packaging Speciﬁcation
EIA STD RS-296E
Littelfuse Concord Packing Spec. DM-0016
103
3KP Series
Transient Voltage Suppression Diodes
104
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 5000W > 5KP series
RoHS
5KP Series
Description
The 5KP Series is designed speciﬁcally to protect sensitive
electronic equipment from voltage transients induced by
lightning and other transient voltage events.
t 3P)4DPNQMJBOU
t 5ZQJDBMNBYJNVN
temperature coefﬁcient
Δ VBR = 0.1% × VBR@25°C
t (MBTTQBTTJWBUFEDIJQ
junction in P600 package
t 8QFBLQVMTF
capability at 10×1000μs
waveform, repetition rate
(duty cycles):0.01%
t 'BTUSFTQPOTFUJNF
typically less than 1.0ps
from 0 Volts to BV min
t &YDFMMFOUDMBNQJOH
capability
t -PXJODSFNFOUBMTVSHF
resistance
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E128662/E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Symbol
Value
Unit
PPPM
5000
W
PD
8.0
W
IFSM
400
A
VF
3.5/5.0
V
TJ , TSTG
-55 to 175
°C
Typical Thermal Resistance Junction
to Lead
RuJL
8.0
°C/W
Typical Thermal Resistance Junction
to Ambient
RuJA
40
°C/W
Peak Pulse Power Dissipation by
10x1000μs test waveform (Fig.1)
(Note 1)
Steady State Power Dissipation on
iniﬁnite heat sink at TL=75ºC (Fig. 5)
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional
only (Note 2)
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
only (Note 3)
Operating Junction and Storage
Temperature Range
t 5ZQJDBM*R less than 2μA
above 12V
t )JHIUFNQFSBUVSF
soldering guaranteed:
260°C/40 seconds /
0.375”, (9.5mm) lead
length, 5 lbs., (2.3kg)
tension
t 1MBTUJDQBDLBHFIBT
Underwriters Laboratory
Flammability classiﬁcation
94V-O
t .BUUF5JO-FBEoGSFF
plated
Applications
TVS devices are ideal for the protection of I/O interfaces,
VCC bus and other vulnerable circuits used in telecom,
computer, industrial and consumer electronic applications.
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
3. VF<3.5V for devices of VBR <
_ 200V and VF<5.0V for devices of VBR >
_ 201V.
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
105
5KP Series
5KP Series
Features
Transient Voltage Suppression Diodes
Axial Leaded – 5000W > 5KP series
Electrical Characteristics
Part
Number
(Uni)
Part
Number
(Bi)
Reverse
Stand off
Voltage VR
(Volts)
5KP5.0A
5KP6.0A
5KP6.5A
5KP7.0A
5KP7.5A
5KP8.0A
5KP8.5A
5KP9.0A
5KP10A
5KP11A
5KP12A
5KP13A
5KP14A
5KP15A
5KP16A
5KP17A
5KP18A
5KP20A
5KP22A
5KP24A
5KP26A
5KP28A
5KP30A
5KP33A
5KP36A
5KP40A
5KP43A
5KP45A
5KP48A
5KP51A
5KP54A
5KP58A
5KP60A
5KP64A
5KP70A
5KP75A
5KP78A
5KP85A
5KP90A
5KP100A
5KP110A
5KP120A
5KP130A
5KP150A
5KP160A
5KP170A
5KP180A
5KP190A
5KP200A
5KP210A
5KP220A
5KP250A
5KP5.0CA
5KP6.0CA
5KP6.5CA
5KP7.0CA
5KP7.5CA
5KP8.0CA
5KP8.5CA
5KP9.0CA
5KP10CA
5KP11CA
5KP12CA
5KP13CA
5KP14CA
5KP15CA
5KP16CA
5KP17CA
5KP18CA
5KP20CA
5KP22CA
5KP24CA
5KP26CA
5KP28CA
5KP30CA
5KP33CA
5KP36CA
5KP40CA
5KP43CA
5KP45CA
5KP48CA
5KP51CA
5KP54CA
5KP58CA
5KP60CA
5KP64CA
5KP70CA
5KP75CA
5KP78CA
5KP85CA
5KP90CA
5KP100CA
5KP110CA
5KP120CA
5KP130CA
5KP150CA
5KP160CA
5KP170CA
5KP180CA
5KP190CA
5KP200CA
5KP210CA
5KP220CA
5KP250CA
5.0
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
20.0
22.0
24.0
26.0
28.0
30.0
33.0
36.0
40.0
43.0
45.0
48.0
51.0
54.0
58.0
60.0
64.0
70.0
75.0
78.0
85.0
90.0
100.0
110.0
120.0
130.0
150.0
160.0
170.0
180.0
190.0
200.0
210.0
220.0
250.0
Breakdown
Voltage VBR
(Volts) @ IT
MIN
MAX
Test
Current
IT
(mA)
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.00
11.10
12.20
13.30
14.40
15.60
16.70
17.80
18.90
20.00
22.20
24.00
26.70
28.90
31.10
33.30
36.70
40.00
44.40
47.80
50.00
53.30
56.70
60.00
64.40
66.70
71.10
77.80
83.30
86.70
94.40
100.00
110.00
122.00
133.00
144.00
167.00
178.00
189.00
200.00
211.00
222.00
233.00
244.00
277.00
7.00
7.37
7.98
8.60
9.21
9.83
10.40
11.10
12.30
13.50
14.70
15.90
17.20
18.50
19.70
20.90
22.10
24.50
26.90
29.50
31.90
34.40
36.80
40.60
44.20
49.10
52.80
55.30
58.90
62.70
66.30
71.20
73.70
78.60
86.00
92.10
95.80
104.00
111.00
123.00
135.00
147.00
159.00
185.00
197.00
209.00
221.00
233.00
246.00
258.00
270.00
306.00
50
50
50
50
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
Maximum
Clamping
Voltage
VC @ IPP
(V)
Maximum
Peak
Pulse
Current IPP
(A)
Maximum
Reverse
Leakage
IR @ VR
(μ A)
9.2
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103.0
113.0
121.0
126.0
137.0
146.0
162.0
177.0
193.0
209.0
243.0
259.0
275.0
292.0
310.0
329.2
349.5
371.1
425.0
554.3
495.1
455.4
425.0
395.3
375.0
354.2
331.2
300.0
280.2
256.3
237.2
219.8
209.0
196.2
184.8
174.7
157.4
143.7
131.1
121.1
112.3
105.4
95.7
87.8
79.1
73.5
70.2
65.9
61.9
58.6
54.5
52.7
49.5
45.1
42.1
40.5
37.2
34.9
31.5
28.8
26.4
24.4
21.0
19.7
18.5
17.5
16.5
15.5
14.6
13.7
12.0
5000
5000
2000
1000
250
150
50
20
15
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Agency
Approval
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
For bidirectional type having VR of 10 volts and less, the IR limit is double.
For parts without A , the VBR is ± 10% and VC is 5% higher than with A parts
5KP Series
106
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 5000W > 5KP series
Ratings and Characteristic Curves (T =25°C unless otherwise noted)
A
Figure 1 - Peak Pulse Power Rating Curve
Figure 2 - Pulse Derating Curve
100
100
Non-repetitive pulse
Peak Pulse Power (kW)
PPPM - Peak Pulse Power (kW)
waveform shown in
Fig.3 TA=25ºC
10
1
0.1
0.1μs
75
50
25
0
1.0μs
10μs
100μs
1.0ms
0
10ms
td - Pulse Width (sec.)
100
125 150 175 200
100000
Bi-directional V=0V
tr=10μsec
TJ=25°C
Pulse Width(td) is deﬁned
as the point where the peak
current decays to 50% of IPPM
Peak Value
IPPM
100
10000
Half Value
IPPM IPPM
( )
10/1000μsec. Waveform
as deﬁned by R.E.A
10
td
1.0
2.0
1000
Bi-directional @ VR
100
2
50
0
Uni-directional V=0V
Uni-directional @ VR
Cj (pF)
IPPM- Peak Pulse Current, % IRSM
75
Figure 4 - Typical Junction Capacitance
150
3.0
Tj=25C
f=1.0MHz
Vsig=50mVp-p
1
1.0
4.0
10.0
100.0
1000.0
VBR - Reverse Breakdown Voltage (V)
t-Time (ms)
Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current
Figure 5 - Steady State Power Derating Curve
9
450
8
IFSM, Peak Forward Surge Current (A)
Steady State Power Dissipation (W)
50
TA - Ambient Temperature (ºC)
Figure 3 - Pulse Waveform
0
25
7
6
5
4
3
L = 0.375” (9.5mm)
Lead Lengths
2
1
0
0
25
50
75
100
125
150
175
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
350
300
250
200
150
100
50
0
200
1
TL - Lead Temperature(ºC)
©2008 Littelfuse, Inc.
400
10
100
Number of Cycles at 60 Hz
107
5KP Series
Transient Voltage Suppression Diodes
Axial Leaded – 5000W > 5KP series
Soldering Parameters
Reﬂow Condition
-FBEoGSFFBTTFNCMZ
Pre Heat
Ramp-up
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
oTFDT
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
3°C/second max
Reﬂow
Critical Zone
TL to TP
TL
Temperature (T)
- Temperature Min (Ts(min))
tp
TP
tL
Ts(max)
Ramp-down
Ts(min)
ts
Preheat
25˚C
- Temperature (TL) (Liquidus)
217°C
- Time (min to max) (ts)
oTFDPOET
t 25˚C to Peak
Time (t)
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
oTFDPOET
Flow/Wave Soldering (Solder Dipping)
Ramp-down Rate
6°C/second max
Peak Temperature :
265OC
Time 25°C to peak Temperature (TP)
8 minutes Max.
Dipping Time :
10 seconds
Do not exceed
280°C
Soldering :
1 time
Physical Speciﬁcations
Environmental Speciﬁcations
Weight
0.07oz., 2.1g
Temperature Cycle
JESD22-A104
Case
P600 molded plastic body over
passivated junction.
Pressure Cooker
JESD 22-A102
Polarity
Color band denotes the cathode except
Bipolar.
High Temp. Storage
JESD22-A103
Terminal
Matte Tin axial leads, solderable per
JESD22-B102D.
HTRB
JESD22-A108
Thermal Shock
JESD22-A106
Dimensions
D
Dimensions
C
A
B
A
Inches
Millimeters
Min
Max
Min
Max
A
1.000
-
25.40
-
B
0.340
0.360
8.60
9.10
C
0.048
0.052
1.22
1.32
D
0.340
0.360
8.60
9.10
P600
5KP Series
108
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 5000W > 5KP series
Part Numbering System
Part Marking System
5KPxxx XX X
Cathode Band
5KPXXX
OPTION CODE:
BLANK Reel Tape
-B Bulk Packaging
TYPE CODE:
A Uni-Directional (5% Voltage Tolerance)
CA Bi-Directional
F
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
Littelfuse Logo
Product Type
SERIES CODE
Packaging
Component
Package
Quantity
Packaging
Option
5KPxxxXX
P600
800
Tape & Reel
5KPxxxXX-B
P600
500
BULK
Part Number
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Packaging Speciﬁcation
EIA STD RS-296E
Littelfuse Concord Packing Spec. DM-0016
109
5KP Series
Transient Voltage Suppression Diodes
110
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 15000W > 15KPA series
RoHS
15KPA Series
Description
The 15KPA Series is designed speciﬁcally to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Features
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E128662/E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
t -PXJODSFNFOUBMTVSHF
resistance
t 5ZQJDBM*R less than 2μA
above 36V
t )JHIUFNQFSBUVSF
soldering guaranteed:
260°C/40 seconds /
0.375”, (9.5mm) lead
length, 5 lbs., (2.3kg)
tension
t 1MBTUJDQBDLBHFIBT
Underwriters Laboratory
Flammability classiﬁcation
94V-O
t .BUUF5JO-FBEoGSFF
plated
Symbol
Value
Unit
PPPM
15000
W
Applications
Steady State Power Dissipation on
iniﬁnite heat sink at TL=75ºC (Fig. 5)
PD
8.0
W
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional
only (Note 2)
TVS devices are ideal for the protection of I/O interfaces,
VCC bus and other vulnerable circuits used in telecom,
computer, industrial and consumer electronic applications.
IFSM
400
A
TJ , TSTG
-55 to 175
°C
Typical Thermal Resistance Junction
to Lead
RuJL
8.0
°C/W
Typical Thermal Resistance Junction
to Ambient
RuJA
40
°C/W
Peak Pulse Power Dissipation by
10x1000μs test waveform (Fig.1)
(Note 1)
Operating Junction and Storage
Temperature Range
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
111
15KPA Series
15KPA Series
t 3P)4DPNQMJBOU
t 5ZQJDBMNBYJNVN
temperature coefﬁcient
Δ VBR = 0.1% × VBR@25°C
t (MBTTQBTTJWBUFEDIJQ
junction in P600 package
t 8QFBLQVMTF
capability at 10×1000μs
waveform, repetition rate
(duty cycles):0.01%
t 'BTUSFTQPOTFUJNF
typically less than 1.0ps
from 0 Volts to BV min
t &YDFMMFOUDMBNQJOH
capability
Transient Voltage Suppression Diodes
Axial Leaded – 15000W > 15KPA series
Electrical Characteristics
MIN
Test
Current
IT
(mA)
Maximum
Peak
Pulse
Current Ipp
(A)
Maximum
Reverse
Leakage
IR @ VR
(μ A)
Maximum
Clamping
Voltage
VC @ IPP
(V)
18.99
20.11
22.34
24.57
26.81
29.04
31.28
33.51
36.90
40.20
44.70
48.00
50.30
53.60
57.00
60.30
64.80
67.00
71.50
78.20
83.80
87.10
94.90
100.50
111.70
122.90
134.00
145.20
167.60
178.70
189.90
201.10
223.40
245.70
268.10
290.40
312.80
50
50
20
10
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
515.4
488.7
440.2
407.0
371.0
343.2
317.9
297.8
276.1
252.5
229.5
216.3
207.4
194.3
182.1
172.2
161.0
155.0
144.9
132.9
123.8
119.7
109.7
103.7
93.6
84.5
78.5
72.5
62.4
58.4
55.4
52.3
47.3
35.2
39.3
36.2
33.2
5000
5000
1500
500
150
50
25
15
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
29.3
30.9
34.3
37.1
40.7
44.0
47.5
50.7
54.7
59.8
65.8
69.8
72.8
77.7
82.9
87.7
93.8
97.4
104.2
113.6
122.0
126.1
137.6
145.6
161.3
178.6
192.3
208.3
241.9
258.6
272.7
288.5
319.1
428.6
384.6
416.7
454.5
Part
Number
(Uni)
Part
Number
(Bi)
Reverse
Stand off
Voltage VR
(Volts)
Breakdown
Voltage VBR
(Volts) @ IT
15KPA17A
15KPA18A
15KPA20A
15KPA22A
15KPA24A
15KPA26A
15KPA28A
15KPA30A
15KPA33A
15KPA36A
15KPA40A
15KPA43A
15KPA45A
15KPA48A
15KPA51A
15KPA54A
15KPA58A
15KPA60A
15KPA64A
15KPA70A
15KPA75A
15KPA78A
15KPA85A
15KPA90A
15KPA100A
15KPA110A
15KPA120A
15KPA130A
15KPA150A
15KPA160A
15KPA170A
15KPA180A
15KPA200A
15KPA220A
15KPA240A
15KPA260A
15KPA280A
15KPA17CA
15KPA18CA
15KPA20CA
15KPA22CA
15KPA24CA
15KPA26CA
15KPA28CA
15KPA30CA
15KPA33CA
15KPA36CA
15KPA40CA
15KPA43CA
15KPA45CA
15KPA48CA
15KPA51CA
15KPA54CA
15KPA58CA
15KPA60CA
15KPA64CA
15KPA70CA
15KPA75CA
15KPA78CA
15KPA85CA
15KPA90CA
15KPA100CA
15KPA110CA
15KPA120CA
15KPA130CA
15KPA150CA
15KPA160CA
15KPA170CA
15KPA180CA
15KPA200CA
15KPA220CA
15KPA240CA
15KPA260CA
15KPA280CA
17
18
20
22
24
26
28
30
33
36
40
43
45
48
51
54
58
60
64
70
75
78
85
90
100
110
120
130
150
160
170
180
200
220
240
260
280
Agency
Approval
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
For bidirectional type having VR of 30 volts and less, the IR limit is double.
For parts without A, the VBR is +10% and Vc is 5% higher than with A parts
15KPA Series
112
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 15000W > 15KPA series
Ratings and Characteristic Curves (T =25°C unless otherwise noted)
A
Figure 1 - Peak Pulse Power Rating Curve
Figure 2 - Pulse Derating Curve
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage %
PPPM-Peak Pulse Power (kW)
1000
100
10
1
0.000001
0.00001
0.0001
100
80
60
40
20
0
0.001
0
25
td-Pulse Width (sec.)
50
75
100
125
150
175
200
TA-Ambient temperature (ºC)
Figure 3 - Test Pulse Waveform
Figure 4 - Typical Junction Capacitance
tr=10μsec
TJ=25°C
Pulse Width(td) is deﬁned
as the point where the peak
current decays to 50% of IPPM
Peak Value
IPPM
100
Bi-directional V=0V
10000
Uni-directional V=0V
Cj (pf)
IPPM- Peak Pulse Current, % IRSM
150
Half Value
IPPM IPPM
( )
100
2
50
Bi-directional @ VR
Uni-directional @ VR
10/1000μsec. Waveform
as deﬁned by R.E.A
Tj=25C
f=1.0MHz
Vsig=50mVp-p
0
td
1
1.0
0
2.0
3.0
0.0
4.0
50.0 100.0 150.0 200.0 250.0 300.0 350.0
VBR - Reverse Breakdown Voltage (V)
t-Time (ms)
Figure 6 - Maximum Non-Repetitive Forward Surge
Current
Figure 5 - Steady State Power Derating Curve
450
8
IFSM, Peak Forward Surge Current (A)
Steady State Power Dissipation (W)
9
7
6
5
4
3
L = 0.375” (9.5mm)
Lead Lengths
2
1
0
0
25
50
75
100
125
150
175
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
350
300
250
200
150
100
50
0
200
1
TL- Lead Temperature(ºC)
©2008 Littelfuse, Inc.
400
113
10
Number of Cycles at 60 Hz
100
15KPA Series
Transient Voltage Suppression Diodes
Axial Leaded – 15000W > 15KPA series
Soldering Parameters
Reﬂow Condition
-FBEoGSFFBTTFNCMZ
Pre Heat
Ramp-up
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
oTFDT
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
3°C/second max
Reﬂow
Critical Zone
TL to TP
TL
Temperature (T)
- Temperature Min (Ts(min))
tp
TP
tL
Ts(max)
Ramp-down
Ts(min)
ts
Preheat
25˚C
- Temperature (TL) (Liquidus)
217°C
- Time (min to max) (ts)
oTFDPOET
t 25˚C to Peak
Time (t)
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
oTFDPOET
Flow/Wave Soldering (Solder Dipping)
Ramp-down Rate
6°C/second max
Peak Temperature :
265OC
Time 25°C to peak Temperature (TP)
8 minutes Max.
Dipping Time :
10 seconds
Do not exceed
280°C
Soldering :
1 time
Physical Speciﬁcations
Environmental Speciﬁcations
Weight
0.07oz., 2.5g
Temperature Cycle
JESD22-A104
Case
P600 molded plastic body over
passivated junction.
Pressure Cooker
JESD 22-A102
Polarity
Color band denotes the cathode except
Bipolar.
High Temp. Storage
JESD22-A103
Terminal
Matte Tin axial leads, solderable per
JESD22-B102D.
HTRB
JESD22-A108
Thermal Shock
JESD22-A106
Dimensions
D
Dimensions
C
A
B
A
Inches
Millimeters
Min
Max
Min
Max
A
1.000
-
25.40
-
B
0.340
0.360
8.60
9.10
C
0.048
0.052
1.22
1.32
D
0.340
0.360
8.60
9.10
P600
15KPA Series
114
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 15000W > 15KPA series
Part Numbering System
Part Marking System
15KPA xxx XX X
Cathode Band
15KPAXXX
OPTION CODE:
BLANK Reel Tape
-B Bulk Packaging
TYPE CODE:
A Uni-Directional (5% Voltage Tolerance)
CA Bi-Directional
F
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
Littelfuse Logo
Product Type
SERIES CODE
Packaging
Component
Package
Quantity
Packaging
Option
15KPAxxxXX
P600
800
Tape & Reel
15KPAxxxXX-B
P600
500
BULK
Part Number
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Packaging Speciﬁcation
EIA STD RS-296E
Littelfuse Concord Packing Spec. DM-0016
115
15KPA Series
Transient Voltage Suppression Diodes
116
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 20000W > 20KPA series
RoHS
20KPA Series
Description
The 20KPA Series is designed speciﬁcally to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Features
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
t -PXJODSFNFOUBMTVSHF
resistance
t 5ZQJDBM*R less than 2μA
above 49V
t )JHIUFNQFSBUVSF
soldering guaranteed:
260°C/40 seconds /
0.375”,(9.5mm) lead
length, 5 lbs., (2.3kg)
tension
t 1MBTUJDQBDLBHFIBT
Underwriters Laboratory
Flammability classiﬁcation
94V-O
t .BUUF5JO-FBEoGSFF
plated
Symbol
Value
Unit
PPPM
20000
W
Applications
Steady State Power Dissipation on
iniﬁnite heat sink at TL=75ºC (Fig. 5)
PD
8.0
W
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional
only (Note 2)
TVS devices are ideal for the protection of I/O interfaces,
VCC bus and other vulnerable circuits used in telecom,
computer, industrial and consumer electronic applications.
IFSM
400
A
TJ , TSTG
-55 to 175
°C
Typical Thermal Resistance Junction
to Lead
RuJL
8.0
°C/W
Typical Thermal Resistance Junction
to Ambient
RuJA
40
°C/W
Peak Pulse Power Dissipation by
10x1000μs test waveform (Fig.1)
(Note 1)
Operating Junction and Storage
Temperature Range
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
117
20KPA Series
20KPA Series
t 3P)4DPNQMJBOU
t 5ZQJDBMNBYJNVN
temperature coefﬁcient
Δ V. = 0.1% × VBR@25°C
t (MBTTQBTTJWBUFEDIJQ
junction in P600 package
t 8QFBLQVMTF
capability at 10×1000μs
waveform, repetition rate
(duty cycles):0.01%
t 'BTUSFTQPOTFUJNF
typically less than 1.0ps
from 0 Volts to BV min
t &YDFMMFOUDMBNQJOH
capability
Transient Voltage Suppression Diodes
Axial Leaded – 20000W > 20KPA series
Electrical Characteristics
MIN
Test
Current
IT
(mA)
Maximum
Peak
Pulse
Current Ipp
(A)
Maximum
Reverse
Leakage
IR @ VR
(μ A)
Maximum
Clamping
Voltage
VC @ IPP
(V)
22.34
26.81
29.04
31.28
33.51
35.74
38.00
40.20
44.70
49.10
53.60
58.10
62.60
67.00
71.50
76.00
80.40
89.40
98.30
107.20
116.20
125.10
134.00
147.40
160.80
178.70
192.10
201.10
214.50
227.90
241.30
259.10
268.10
286.00
312.80
335.10
50
50
50
50
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
548.9
490.3
451.9
420.8
392.2
372.0
351.3
328.5
297.9
277.9
254.4
235.4
218.1
207.0
194.2
183.6
174.1
155.4
142.3
130.3
120.2
111.0
104.1
94.8
87.1
78.3
72.9
69.4
65.4
61.4
58.0
54.0
52.2
49.0
44.8
41.8
5000
5000
2000
1000
250
150
50
20
15
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
36.8
41.2
44.7
48.0
51.5
54.3
57.5
61.5
67.8
72.7
79.4
85.8
92.6
97.6
104.0
110.0
116.0
130.0
142.0
155.0
168.0
182.0
194.0
213.0
232.0
258.0
277.0
291.0
309.0
329.0
348.0
374.0
387.0
412.0
451.0
483.0
Part
Number
(Uni)
Part
Number
(Bi)
Reverse
Stand off
Voltage VR
(Volts)
Breakdown
Voltage VBR
(Volts) @ IT
20KPA20A
20KPA24A
20KPA26A
20KPA28A
20KPA30A
20KPA32A
20KPA34A
20KPA36A
20KPA40A
20KPA44A
20KPA48A
20KPA52A
20KPA56A
20KPA60A
20KPA64A
20KPA68A
20KPA72A
20KPA80A
20KPA88A
20KPA96A
20KPA104A
20KPA112A
20KPA120A
20KPA132A
20KPA144A
20KPA160A
20KPA172A
20KPA180A
20KPA192A
20KPA204A
20KPA216A
20KPA232A
20KPA240A
20KPA256A
20KPA280A
20KPA300A
20KPA20CA
20KPA24CA
20KPA26CA
20KPA28CA
20KPA30CA
20KPA32CA
20KPA34CA
20KPA36CA
20KPA40CA
20KPA44CA
20KPA48CA
20KPA52CA
20KPA56CA
20KPA60CA
20KPA64CA
20KPA68CA
20KPA72CA
20KPA80CA
20KPA88CA
20KPA96CA
20KPA104CA
20KPA112CA
20KPA120CA
20KPA132CA
20KPA144CA
20KPA160CA
20KPA172CA
20KPA180CA
20KPA192CA
20KPA204CA
20KPA216CA
20KPA232CA
20KPA240CA
20KPA256CA
20KPA280CA
20KPA300CA
20
24
26
28
30
32
34
36
40
44
48
52
56
60
64
68
72
80
88
96
104
112
120
132
144
160
172
180
192
204
216
232
240
256
280
300
Agency
Approval
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
For bidirectional type having VRWM of 40 volts and less, the IR limit is double.
For parts without A , the VBR is ± 10% and VC is 5% higher than with A parts.
20KPA Series
118
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 20000W > 20KPA series
Ratings and Characteristic Curves (T =25°C unless otherwise notedFigure 1 - Peak Pulse Power Rating Curve
A
Figure 1 - Peak Pulse Power Rating Curve
Figure 2 - Pulse Derating Curve
100
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage %
PPPM- Peak Pulse Power (KW)
1000
100
10
1
0.1
0.000001
60
40
20
0
0.001
0.0001
0.00001
80
0
25
50
75
100
125
150
175
200
TA-Ambient temperature (ºC)
td- Pulse Width (Sec.)
Figure 3 - Pulse Waveform
Figure 4 - Typical Junction Capacitance
tr=10μsec
TJ=25°C
Pulse Width(td) is deﬁned
as the point where the peak
current decays to 50% of IPPM
Peak Value
IPPM
100
Bi-directional V= OV
Cj, Junction Capacitance (pf)
IPPM- Peak Pulse Current, % IRSM
150
Half Value
IPPM IPPM
( )
2
50
10/1000μsec. Waveform
as deﬁned by R.E.A
td
0
Uni-directional V= OV
Uni-directional @ VR
Bi-directional @ VR
100
Tj=25C
f=1.0MHz
Vsig=50mVp-p
1
1.0
0
10000
2.0
3.0
0
4.0
t-Time (ms)
100
150
200
250
300
350
Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current
Figure 5 - Steady State Power Derating Curve
9
450
8
IFSM, Peak Forward Surge Current (A)
Steady State Power Dissipation (W)
50
VBR - Reverse Breakdwon Voltage (V)
7
6
5
4
3
L = 0.375” (9.5mm)
Lead Lengths
2
1
0
0
25
50
75
300
250
200
150
100
50
1
TL- Lead Temperature (ºC)
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
350
0
100 125 150 175 200
©2008 Littelfuse, Inc.
400
10
100
Number of Cycles at 60 Hz
119
20KPA Series
Transient Voltage Suppression Diodes
Axial Leaded – 20000W > 20KPA series
Soldering Parameters
Reﬂow Condition
-FBEoGSFFBTTFNCMZ
Pre Heat
Ramp-up
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
oTFDT
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
3°C/second max
Reﬂow
Critical Zone
TL to TP
TL
Temperature (T)
- Temperature Min (Ts(min))
tp
TP
tL
Ts(max)
Ramp-down
Ts(min)
ts
Preheat
25˚C
- Temperature (TL) (Liquidus)
217°C
- Time (min to max) (ts)
oTFDPOET
t 25˚C to Peak
Time (t)
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
oTFDPOET
Flow/Wave Soldering (Solder Dipping)
Ramp-down Rate
6°C/second max
Peak Temperature :
265OC
Time 25°C to peak Temperature (TP)
8 minutes Max.
Dipping Time :
10 seconds
280°C
Soldering :
1 time
Do not exceed
Physical Speciﬁcations
Environmental Speciﬁcations
Weight
0.07oz., 2.5g
Temperature Cycle
JESD22-A104
Case
P600 molded plastic body over
passivated junction.
Pressure Cooker
JESD 22-A102
Polarity
Color band denotes the cathode except
Bipolar.
High Temp. Storage
JESD22-A103
Terminal
Matte Tin axial leads, solderable per
JESD22-B102D.
HTRB
JESD22-A108
Thermal Shock
JESD22-A106
Dimensions
D
Dimensions
C
A
A
B
Inches
Millimeters
Min
Max
Min
Max
A
1.000
-
25.40
-
B
0.340
0.360
8.60
9.10
C
0.048
0.052
1.22
1.32
D
0.340
0.360
8.60
9.10
P600
20KPA Series
120
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 20000W > 20KPA series
Part Numbering System
Part Marking System
20KPA xxx XX X
Cathode Band
20KPAXXX
OPTION CODE:
BLANK Reel Tape
-B Bulk Packaging
TYPE CODE:
A Uni-Directional (5% Voltage Tolerance)
CA Bi-Directional
F
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
Littelfuse Logo
Product Type
SERIES CODE
Packaging
Component
Package
Quantity
Packaging
Option
20KPAxxxXX
P600
800
Tape & Reel
20KPAxxxXX-B
P600
500
BULK
Part Number
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Packaging Speciﬁcation
EIA STD RS-296E
Littelfuse Concord Packing Spec. DM-0016
121
20KPA Series
Transient Voltage Suppression Diodes
122
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 30000W > 30KPA series
RoHS
30KPA Series
Description
The 30KPA Series is designed speciﬁcally to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Features
t 3P)4DPNQMJBOU
t 5ZQJDBMNBYJNVN
temperature coefﬁcient
Δ VBR = 0.1% × VBR@25°C
t (MBTTQBTTJWBUFEDIJQ
junction in P600 package
t 8QFBLQVMTF
capability at 10×1000μs
waveform, repetition rate
(duty cycles):0.01%
t 'BTUSFTQPOTFUJNF
typically less than 1.0ps
from 0 Volts to BV min
t &YDFMMFOUDMBNQJOH
capability
Agency Approvals
AGENCY FILE NUMBER
E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Symbol
Value
Unit
PPPM
30000
W
Steady State Power Dissipation on
iniﬁnite heat sink at TL=75ºC (Fig. 5)
PD
8.0
W
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional
only (Note 2)
IFSM
400
A
TJ , TSTG
-55 to 175
°C
Typical Thermal Resistance Junction
to Lead
RuJL
8.0
°C/W
Typical Thermal Resistance Junction
to Ambient
RuJA
40
°C/W
Peak Pulse Power Dissipation by
10x1000μs test waveform (Fig.1)
(Note 1)
Operating Junction and Storage
Temperature Range
Applications
TVS devices are ideal for the protection of I/O interfaces,
VCC bus and other vulnerable circuits used in telecom,
computer, industrial and consumer electronic applications.
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
123
30KPA Series
30KPA Series
AGENCY
t -PXJODSFNFOUBMTVSHF
resistance
t 5ZQJDBM*R less than 2μA
above 73V
t )JHIUFNQFSBUVSF
soldering guaranteed:
260°C/40 seconds /
0.375”,(9.5mm) lead
length, 5 lbs., (2.3kg)
tension
t 1MBTUJDQBDLBHFIBT
Underwriters Laboratory
Flammability classiﬁcation
94V-O
t .BUUF5JO-FBEoGSFF
plated
Transient Voltage Suppression Diodes
Axial Leaded – 30000W > 30KPA series
Electrical Characteristics
MIN
Test
Current
IT
(mA)
Maximum
Peak
Pulse Current
Ipp (A)
Maximum
Reverse
Leakage
IR @VR
(μ A)
Maximum
Clamping
Voltage
VC @ IPP
(V)
31.28
33.51
36.90
40.20
43.60
46.90
48.00
50.30
53.60
57.00
60.30
64.80
67.00
71.50
73.70
78.20
79.30
80.40
83.80
87.10
93.80
100.50
107.20
113.90
120.60
134.00
147.40
160.80
167.60
174.30
178.70
187.70
189.90
201.10
221.20
50
50
50
50
20
10
10
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
606.0
548.9
517.9
490.3
450.9
420.8
415.1
391.5
371.3
350.7
331.5
327.9
297.1
291.3
283.2
278.0
271.7
265.8
253.8
234.9
217.7
207.0
194.2
183.0
172.9
155.9
142.3
135.8
129.8
123.7
120.0
111.2
110.2
104.3
94.7
5000
5000
5000
5000
2000
1000
1000
250
150
50
20
20
15
10
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
50.0
55.2
58.5
61.8
67.2
72.0
73.0
77.4
81.6
86.4
91.4
92.4
102.0
104.0
107.0
109.0
111.5
114.0
119.4
129.0
139.2
146.4
156.0
165.6
175.2
194.4
213.0
223.2
233.4
245.0
252.6
272.4
275.0
290.4
319.8
241.30
268.10
288.20
290.40
301.60
312.80
321.70
5
5
5
5
5
5
5
86.9
78.3
72.8
72.8
69.5
65.3
64.5
2
2
2
2
2
2
2
348.6
387.0
416.4
416.0
436.2
464.0
469.9
Part
Number
(Uni)
Part
Number
(Bi)
Reverse
Stand off
Voltage VR
(Volts)
Breakdown
Voltage VBR
(Volts) @ IT
30KPA28A
30KPA30A
30KPA33A
30KPA36A
30KPA39A
30KPA42A
30KPA43A
30KPA45A
30KPA48A
30KPA51A
30KPA54A
30KPA58A
30KPA60A
30KPA64A
30KPA66A
30KPA70A
30KPA71A
30KPA72A
30KPA75A
30KPA78A
30KPA84A
30KPA90A
30KPA96A
30KPA102A
30KPA108A
30KPA120A
30KPA132A
30KPA144A
30KPA150A
30KPA156A
30KPA160A
30KPA168A
30KPA170A
30KPA180A
30KPA198A
30KPA216A
30KPA240A
30KPA258A
30KPA260A
30KPA270A
30KPA280A
30KPA288A
30KPA28CA
30KPA30CA
30KPA33CA
30KPA36CA
30KPA39CA
30KPA42CA
30KPA43CA
30KPA45CA
30KPA48CA
30KPA51CA
30KPA54CA
30KPA58CA
30KPA60CA
30KPA64CA
30KPA66CA
30KPA70CA
30KPA71CA
30KPA72CA
30KPA75CA
30KPA78CA
30KPA84CA
30KPA90CA
30KPA96CA
30KPA102CA
30KPA108CA
30KPA120CA
30KPA132CA
30KPA144CA
30KPA150CA
30KPA156CA
30KPA160CA
30KPA168CA
30KPA170CA
30KPA180CA
30KPA198CA
28
30
33
36
39
42
43
45
48
51
54
58
60
64
66
70
71
72
75
78
84
90
96
102
108
120
132
144
150
156
160
168
170
180
198
30KPA216CA
30KPA240CA
30KPA258CA
30KPA260CA
30KPA270CA
30KPA280CA
30KPA288CA
216
240
258
260
270
280
288
Agency
Approval
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
For bidirectional type having VRWM of 60 volts and less, the IR limit is double.
For parts without A , the VBR is ± 10%.
30KPA Series
124
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 30000W > 30KPA series
Ratings and Characteristic Curves (T =25°C unless otherwise noted)
A
Figure 1 - Peak Pulse Power Rating Curve
Figure 2 - Pulse Derating Curve
100
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage %
Pppm-Peak Pulse Power (KW)
1000
100
10
1
0.1
0.000001
0.00001
0.0001
0.001
80
60
40
20
0
0
25
50
75
100
125
150
175
200
TA-Ambient temperature (ºC)
td-Pulse Width (Sec.)
Figure 3 - Pulse Waveform
Figure 4 - Typical Junction Capacitance
tr=10μsec
TJ=25°C
Pulse Width(td) is deﬁned
as the point where the peak
current decays to 50% of IPPM
Peak Value
IPPM
100
Bi-directional V= OV
Cj, Junction Capacitance (pf)
IPPM- Peak Pulse Current, % IRSM
150
Half Value
IPPM IPPM
( )
2
50
10/1000μsec. Waveform
as deﬁned by R.E.A
td
0
Uni-directional V= OV
Uni-directional @ VR
100
Bi-directional @ VR
Tj=25C
f=1.0MHz
Vsig=50mVp-p
1
1.0
0
10000
2.0
3.0
0
4.0
t-Time (ms)
50
100
150
200
250
VBR - Reverse Breakdown Voltage (V)
300
Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current
Figure 5 - Steady State Power Derating Curve
450
8
IFSM, Peak Forward Surge Current (A)
Steady State Power Dissipation (W)
9
7
6
5
4
3
L = 0.375” (9.5mm)
Lead Lengths
2
1
0
0
25
50
75
300
250
200
150
100
50
1
TL- Lead Temperature (ºC)
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
350
0
100 125 150 175 200
©2008 Littelfuse, Inc.
400
10
100
Number of Cycles at 60 Hz
125
30KPA Series
Transient Voltage Suppression Diodes
Axial Leaded – 30000W > 30KPA series
Soldering Parameters
Reﬂow Condition
-FBEoGSFFBTTFNCMZ
Pre Heat
Ramp-up
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
oTFDT
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
3°C/second max
Reﬂow
Critical Zone
TL to TP
TL
Temperature (T)
- Temperature Min (Ts(min))
tp
TP
tL
Ts(max)
Ramp-down
Ts(min)
ts
Preheat
25˚C
- Temperature (TL) (Liquidus)
217°C
- Time (min to max) (ts)
oTFDPOET
t 25˚C to Peak
Time (t)
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
oTFDPOET
Flow/Wave Soldering (Solder Dipping)
Ramp-down Rate
6°C/second max
Peak Temperature :
265OC
Time 25°C to peak Temperature (TP)
8 minutes Max.
Dipping Time :
10 seconds
Do not exceed
280°C
Soldering :
1 time
Physical Speciﬁcations
Environmental Speciﬁcations
Weight
0.07oz., 2.5g
Temperature Cycle
JESD22-A104
Case
P600 molded plastic body over
passivated junction.
Pressure Cooker
JESD 22-A102
Polarity
Color band denotes the cathode except
Bipolar.
High Temp. Storage
JESD22-A103
Terminal
Matte Tin axial leads, solderable per
JESD22-B102D.
HTRB
JESD22-A108
Thermal Shock
JESD22-A106
Dimensions
D
Dimensions
C
A
A
B
Inches
Millimeters
Min
Max
Min
Max
A
1.000
-
25.40
-
B
0.340
0.360
8.60
9.10
C
0.048
0.052
1.22
1.32
D
0.340
0.360
8.60
9.10
P600
30KPA Series
126
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 30000W > 30KPA series
Part Numbering System
Part Marking System
30KPA xxx XX X
Cathode Band
30KPAXXX
OPTION CODE:
BLANK Reel Tape
-B Bulk Packaging
TYPE CODE:
A Uni-Directional (5% Voltage Tolerance)
CA Bi-Directional
F
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
Littelfuse Logo
Product Type
SERIES CODE
Packaging
Component
Package
Quantity
Packaging
Option
30KPAxxxXX
P600
800
Tape & Reel
30KPAxxxXX-B
P600
500
BULK
Part Number
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Packaging Speciﬁcation
EIA STD RS-296E
Littelfuse Concord Packing Spec. DM-0016
127
30KPA Series
Transient Voltage Suppression Diodes
128
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 6kA > AK6 series
RoHS
AK6 Series
Description
The new AK6 series of high current transient suppressors
have been specially designed for use in A.C. line
protection and any demanding applications (AC or DC).
They offer superior clamping characteristics over standard
S.A.D. technologies by virtue of the Littelfuse Foldbak™
technology, which provides a clamping voltage lower
than the avalanche voltage (but above the rated working
voltage). Therefore, any voltage rise due to increased
current conduction is contained to a minimum, providing
the best possible protection level. They can also be
connected in series and/or parallel to create very high
capacity protection solutions.
Agency Approvals
AGENCY
Features
AGENCY FILE NUMBER
t 3P)4DPNQMJBOU
t 'PMECBL™ technology for
superior clamping factor
t (MBTT1BTTJWBUFE+VODUJPO
for reliabilty
t #JEJSFDUJPOBM
t 6MUSBDPNQBDU
times less volume than
E128662
Maximum Ratings and Thermal Characteristics
Parameter
Symbol
Value
Unit
Operating Junction and
Storage Temperature Range
TJ , TSTG
(-)55 to 150
°C
IPP
6
kA
Current Rating1
AK6 Series
(TA=25OC unless otherwise noted)
traditional discrete
solutions
t 7FSZ-PX$MBNQJOH
Voltage
t 4IBSQ#SFBLEPXO7PMUBHF
t -PX4MPQF3FTJTUBODF
Note:
1. Rated IPP measured with 8 x 20μS pulse.
Electrical Characteristics
Part
Numbers
Standoff
Voltage
(VSO) Volts
Max.
Reserve
Leakage
(IR) @VSO
μA
Reverse Breakdown
Voltage (VBR) @ IT
Test
Current
IT
Min Volts Max Volts
(mA)
VCL Volts
IPP Amps
(%/OC)
(nF)
10
10
10
10
10
10
10
110
140
260
290
340
520
625
6,000
6,000
6,000
6,000
6,000
6,000
6,000
0.1
0.1
0.1
0.1
0.1
0.1
0.1
8
6.5
2.8
2.5
2.0
1.4
1.0
AK6 - 058C
58
20
64
AK6 - 076C
76
20
85
AK6 - 170C
170
20
180
AK6 - 190C
190
20
200
AK6
240C
240
20
250
Note: Using 8 x 20μS wave shape as deﬁned in IEC 61000-4-5.
AK6 - 380C
380
20
401
AK6 - 430C
430
20
440
©2008 Littelfuse, Inc.
All
speciﬁcations
subject
to change
without
notice.
Speciﬁcations
areare
subject
to change
without
notice.
Please refer to http://www.littelfuse.com/series/ak6.html
for current information.
http://www.littelfuse.com for current information.
70
95
220
245
285
443
490
129
Max. Clamping Voltage Max. Temp
Max.
Agency
VCL @ Ipp Peak Pulse Coefﬁcient Capacitance Approval
Current (IPP) (Note 1)
OF VBR
0 Bias 10kHz
X
X
X
X
X
X
X
AK6 Series
Transient Voltage Suppression Diodes
Axial Leaded – 6kA > AK6 series
Soldering Parameters
Reﬂow Condition
-FBEoGSFFBTTFNCMZ
Pre Heat
Ramp-up
150°C
TL
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
oTFDT
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
3°C/second max
Reﬂow
Temperature (T)
- Temperature Min (Ts(min))
tp
TP
Critical Zone
TL to TP
tL
Ts(max)
Ramp-down
Ts(min)
ts
Preheat
25˚C
- Temperature (TL) (Liquidus)
217°C
- Time (min to max) (ts)
oTFDPOET
t 25˚C to Peak
Time (t)
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
oTFDPOET
Ramp-down Rate
6°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
280°C
Flow/Wave Soldering (Solder Dipping)
Peak Temperature :
265OC
Dipping Time :
10 seconds
Soldering :
1 time
Physical Speciﬁcations
Weight
Contact manufacturer
Case
Epoxy encapsulated
Terminal
Silver plated leads, solderable per
MIL-STD-202 Method 208
Ratings and Characteristic Curves (T =25°C unless otherwise noted)
A
Peak Power Derating
Percent of Rated Value
120
100
80
60
40
20
0
0
25
50
75
100
125
150
AMBIENT TEMPERATURE (°C)
AK6 Series
130
©2008 Littelfuse, Inc.
All Speciﬁcations
speciﬁcations are
are subject
subject to
to change
change without
without notice.
notice.
Please refer to http://www.littelfuse.com/series/ak6.html
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 6kA > AK6 series
Dimensions
Dimensions
A
F
G
L2
D
B
E
C
Inches
Millimeters
A
0.950
24.15
B
0.095
2.4
C - 058C/076C
0.236
6.00
C
0.145
3.68
D
0.570 max.
14.48 max.
E
0.050
1.270
F
0.500 max.
12.70 max.
G - 058C/076C
0.200
5.08
G - 170C/190C
0.320
8.13
G - 240C
0.370
9.4
G - 380C/430C
0.543
13.8
L1
0.310
7.87
L1 - 380C/430C
0.150
3.81
L2= A - (G+L1) tolerance +/- 0.04 inch (1.0 mm)
L1
Part Marking System
Part Numbering System
Date Code
Littelfuse Logo
AK6 XXXX
AK6-xxxx
XX
Series Type
LF
Stand Off Voltage
(Please Refer to Electrical
Characteristics Chart)
Product Type
Note: UL mark does not appear on -058C & -076C.
©2008 Littelfuse, Inc.
All
speciﬁcations
subject
to change
without
notice.
Speciﬁcations
areare
subject
to change
without
notice.
Please refer to http://www.littelfuse.com/series/ak6.html
for current information.
http://www.littelfuse.com for current information.
131
AK6 Series
Transient Voltage Suppression Diodes
132
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 10kA > AK10 series
RoHS
AK10 Series
Description
The new AK10 series of high current transient suppressors
have been specially designed for use in A.C. line
protection and any demanding applications (AC or DC).
They offer superior clamping characteristics over standard
S.A.D. technologies by virtue of the Littelfuse Foldbak™
technology, which provides a clamping voltage lower
than the avalanche voltage (but above the rated working
voltage). Therefore, any voltage rise due to increased
current conduction is contained to a minimum, providing
the best possible protection level. They can also be
connected in series and/or parallel to create very high
capacity protection solutions.
Agency Approvals
AGENCY
Features
AGENCY FILE NUMBER
t 3P)4DPNQMJBOU
t 'PMECBL™ technology for
superior clamping factor
t (MBTT1BTTJWBUFE+VODUJPO
t #JEJSFDUJPOBM
t 6MUSB$PNQBDU
times less volume than
traditional discrete
solutions
E128662
Maximum Ratings and Thermal Characteristics
Parameter
Symbol
Value
Unit
Operating Junction and
Storage Temperature Range
TJ , TSTG
(-)55 to 150
°C
IPP
10
kA
Current Rating1
AK10 Series
(TA=25OC unless otherwise noted)
t 7FSZ-PX$MBNQJOH
Voltage
t 4IBSQ#SFBLEPXO7PMUBHF
t -PX4MPQF3FTJTUBODF
Note:
1. Rated IPP measured with 8 x 20μs pulse.
Electrical Characteristics
Part
Numbers
AK10 - 058C
AK10 - 076C
AK10 - 170C
AK10 - 190C
AK10 - 240C
AK10 - 380C
AK10 - 430C
Test
Max. Clamping Voltage Max. Temp
Max.
Max.
Standoff
Agency
Reverse Breakdown
Current VCL @ Peak Pulse Current Coefﬁcient Capacitance Approval
Reserve
Voltage
Voltage (VBR) @ IT
IT
(IPP) (Note 1)
of VBR
0 Bias 10kHz
Leakage
(VSO)
Volts
(IR) @VSO μA
Min Volts Max Volts
(mA)
VCL Volts
IPP Amps
(%/OC)
(nF)
58
76
170
190
240
380
430
20
20
20
20
20
20
20
64
85
180
200
250
401
440
70
95
220
245
285
443
490
10
10
10
10
10
10
10
110
140
260
290
340
520
625
10,000
10,000
10,000
10,000
10,000
10,000
10,000
0.1
0.1
0.1
0.1
0.1
0.1
0.1
6.5
6.5
2.8
2.5
2.2
2.0
1.4
X
X
X
X
X
X
X
Note: Using 8 x 20μS wave shaped deﬁned in IEC 61000-4-5.
©2008 Littelfuse, Inc.
All
speciﬁcations
subject
to change
without
notice.
Speciﬁcations
areare
subject
to change
without
notice.
Please refer to http://www.littelfuse.com/series/ak10.html
for current information.
http://www.littelfuse.com for current information.
133
AK10 Series
Transient Voltage Suppression Diodes
Axial Leaded – 10kA > AK10 series
Soldering Parameters
Reﬂow Condition
-FBEoGSFFBTTFNCMZ
Pre Heat
Ramp-up
150°C
TL
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
oTFDT
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
3°C/second max
Reﬂow
Temperature (T)
- Temperature Min (Ts(min))
tp
TP
Ts(max)
Ramp-down
Ts(min)
ts
Preheat
25˚C
- Temperature (TL) (Liquidus)
217°C
- Time (min to max) (ts)
oTFDPOET
t 25˚C to Peak
Time (t)
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
oTFDPOET
Flow/Wave Soldering (Solder Dipping)
Ramp-down Rate
6°C/second max
Peak Temperature :
265OC
Time 25°C to peak Temperature (TP)
8 minutes Max.
Dipping Time :
10 seconds
280°C
Soldering :
1 time
Do not exceed
Critical Zone
TL to TP
tL
Physical Speciﬁcations
Weight
Contact manufacturer
Case
Epoxy encapsulated
Terminal
Silver plated leads, solderable per
MIL-STD-202 Method 208
Ratings and Characteristic Curves (T =25°C unless otherwise noted)
A
Peak Power Derating
Percent of Rated Value
120
100
80
60
40
20
0
0
25
50
75
100
125
150
AMBIENT TEMPERATURE (°C)
AK10 Series
134
©2008 Littelfuse, Inc.
All Speciﬁcations
speciﬁcations are
are subject
subject to
to change
change without
without notice.
notice.
Please refer to http://www.littelfuse.com/series/ak10.html
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 10kA > AK10 series
Dimensions
Dimensions
A
G
L2
F
D
E
C
Millimeters
A
0.950
24.15
B
0.095
2.4
C - 058C/076C
0.236
6.00
C
0.145
3.68
D
0.570 max.
14.48 max.
E
0.050
1.270
F
0.500 max.
12.70 max.
G - 058C/076C
0.200
5.08
G - 170C/190C
0.362
9.2
G - 240C
0.420
10.67
G - 380C/430C
0.650
16.50
L1
0.310
7.87
L1 - 380C/430C
0.177
4.5
L2= A - (G+L1) tolerance +/- 0.04 inch (1.0 mm)
L1
B
Inches
Part Marking System
Part Numbering System
Date Code
AK10 XXXX
Littelfuse Logo
AK10-xxxx
XX
Series Type
LF
Stand Off Voltage
(Please Refer to Electrical
Characteristics Chart)
Product Type
Note: UL mark does not appear on -058C and -076C.
©2008 Littelfuse, Inc.
All
speciﬁcations
subject
to change
without
notice.
Speciﬁcations
areare
subject
to change
without
notice.
Please refer to http://www.littelfuse.com/series/ak10.html
for current information.
http://www.littelfuse.com for current information.
135
AK10 Series
Transient Voltage Suppression Diodes
134
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 2200W > SLD series
RoHS
SLD Series
Description
The SLD Series is packaged in a highly reliable industry
standard P600 axial leaded package and is designed to
provide percision overvoltage protection for sensitive
electronics.
Features
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Symbol
t -PXJODSFNFOUBMTVSHF
resistance
t )JHIUFNQFSBUVSF
soldering guaranteed:
260°C/40 seconds /
0.375”,(9.5mm) lead
length, 5 lbs., (2.3kg)
tension
t 1MBTUJDQBDLBHFIBT
Underwriters Laboratory
Flammability classiﬁcation
94V-O
t .BUUF5JO-FBEoGSFF
plated
Value
Unit
2200
W
50000
W
Applications
PM(AV)
8.0
W
Designed to protect sensitive electronics from:
VF
3.5
V
- Inductive Load Switching
- Alternator Load Dump
TJ , TSTG
-65 to 175
°C
Typical Thermal Resistance Junction
to Lead
RuJL
8.0
°C/W
Typical Thermal Resistance Junction
to Ambient
RuJA
40
°C/W
Peak Pulse Power Dissipation
1. 100μs x 150ms test waveform
2. 8 x 20μs test waveform
Steady State Power Dissipation on
iniﬁnite heat sink at TL=75ºC (Fig. 5)
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
only
Operating Junction and Storage
Temperature Range
PPPM
SLD Series
t 3P)4DPNQMJBOU
t 5ZQJDBMNBYJNVN
temperature coefﬁcient
Δ VBR = 0.1% × VBR@25°C
t (MBTTQBTTJWBUFEDIJQ
junction in P600 package
t 8QFBLQVMTF
capability at 100μs
× 150ms waveform,
repetition rate
(duty cycles): 0.01%
t 'BTUSFTQPOTFUJNF
typically less than 1.0ps
from 0 Volts to BV min
t &YDFMMFOUDMBNQJOH
capability
Electrical Characteristics (T =25°C unless otherwise noted)
A
Part
Number
(Uni)
Part
Number
(Bi)
SLD10U-017
SLD16U-017
SLD24U-017
SLD10-018
SLD16-018
SLD24-018
Breakdown
Test
Reverse
Voltage VBR @ IT Current Stand off
(V)
IT
Voltage
VR (Volts)
(mA)
MIN
MAX
11.8
18.0
25.0
13
22.0
30.0
5.0
1.0
1.0
Maximum
Reverse
Leakage @ VR
IR (μA)
Maximum
Peak Pulse
Current
Ipp (A)
10
10
10
115
76
61
10
16
24
Maximum
Agency
Clamping Approval
Voltage @ IPP
VC (V)
19.0
28.6
36.0
x
x
x
Notes:
1. VBR measured after IT applied for 300μs, IT= square wave pulse or equivalent.
2. Surge current waveform per 100μS x 150mS exponential wave and derated per Fig. 3.
3. All terms and symbols are consistent with ANSI/IEEE C62.35.
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
135
SLD Series
Transient Voltage Suppression Diodes
Axial Leaded – 2200W > SLD series
Ratings and Characteristic Curves (T =25°C unless otherwise noted)
A
Figure 1 - Peak Pulse Power Rating Curve
Figure 2 - Pulse Derating Curve
100
Peak Pulse Power (PPP) or Current (IPP)
Derating In Percentage%
PPPM-Peak Pulse Power (kW)
100
10
1
80
60
40
20
0
0.00001 0.0001
0.001
0.01
0.1
0
1
Figure 3 - Pulse Waveform
50
75
100
125
150
175
200
Figure 4 - Typical Junction Capacitance
100000
150
'
$ &% "$$#
100
Bi-directional V=0V
'
Uni-directional V=0V
10000
Tj=25ºC
Pulse Width (td) is
defined as the point
where the peak current
decays to 50% of IPPM
Cj (pF)
IPPM- Peak Pulse Current, % IRSM
25
TA-Ambient temperature (ºC)
td-Pulse Width (sec.)
Uni-directional @ VR
1000
100
! % "$$# "$$#
Bi-directional @ VR
( )
50
10
td
1
0
0
Tj=25C
f=1.0MHz
Vsig=50mVp-p
150
300
450
1
600
10
100
1000
VBR - Reverse Breakdown Voltage (V)
t - Time (ms)
Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current
Figure 5 - Steady State Power Derating Curve
450
8
IFSM, Peak Forward Surge Current (A)
Steady State Power Dissipation (W)
9
7
6
5
4
3
L = 0.375” (9.5mm)
Lead Lengths
2
1
0
0
25
50
75
100
125
150
175
350
300
250
200
150
100
50
0
200
1
TL - Lead Temperature(ºC)
SLD Series
400
136
10
Number of Cycles at 60 Hz
100
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 2200W > SLD series
Soldering Parameters
Reﬂow Condition
-FBEoGSFFBTTFNCMZ
tp
TP
- Temperature Min (Ts(min))
Ramp-up
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
oTFDT
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
3°C/second max
Reﬂow
Critical Zone
TL to TP
TL
Temperature (T)
Pre Heat
150°C
tL
Ts(max)
Ramp-down
Ts(min)
ts
Preheat
25˚C
- Temperature (TL) (Liquidus)
217°C
- Time (min to max) (ts)
oTFDPOET
t 25˚C to Peak
Time (t)
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
oTFDPOET
Flow/Wave Soldering (Solder Dipping)
Ramp-down Rate
6°C/second max
Peak Temperature :
265OC
Time 25°C to peak Temperature (TP)
8 minutes Max.
Dipping Time :
10 seconds
Do not exceed
280°C
Soldering :
1 time
Physical Speciﬁcations
Environmental Speciﬁcations
Weight
0.07oz., 2.1g
Temperature Cycle
JESD22-A104
Case
P600 molded plastic body over
passivated junction.
Pressure Cooker
JESD 22-A102
Polarity
Color band denotes the cathode except
Bipolar.
High Temp. Storage
JESD22-A103
Terminal
Matte Tin axial leads, solderable per
JESD22-B102D.
HTRB
JESD22-A108
Thermal Shock
JESD22-A106
Dimensions
D
Dimensions
C
A
B
A
Inches
Millimeters
Min
Max
Min
Max
A
1.000
-
25.40
-
B
0.340
0.360
8.60
9.10
C
0.048
0.052
1.22
1.32
D
0.340
0.360
8.60
9.10
P600
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
137
SLD Series
Transient Voltage Suppression Diodes
Axial Leaded – 2200W > SLD series
Part Numbering System
Part Marking System
SLD XX U-017 X
Cathode Band
SLDXXX
OPTION CODE:
BLANK Reel Tape
-B Bulk Packaging
TYPE CODE:
U-017 Uni-Directional
-018 Bi-Directional
F
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
Littelfuse Logo
Product Type
SERIES CODE
Packaging
Component
Package
Quantity
Packaging
Option
SLDxxXXX
P600
800
Tape & Reel
SLDxxXX-B
P600
500
BOX
Part Number
SLD Series
Packaging Speciﬁcation
EIA STD RS-296E
Littelfuse Concord Packing Spec. DM-0016
138
©2008 Littelfuse, Inc.
Speciﬁcations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
To assist you with your electronics design and selection processes,
Littelfuse also offers:
Comprehensive Online Product Specs on Littelfuse.com—Featuring easy-to-use
navigation, search and selection tools, as well as additional product details.
You can rely on Littelfuse.com for instant answers and continuously
up-to-date information..
Printed Product Catalogs—For ofﬂine and off-the-shelf convenience, our printed
product catalogs include data sheets, selection tables and tutorials covering all
of our core technologies. Contact your Littelfuse product representative or visit
www.littelfuse.com/catalogs to check availability.
Circuit Protection Design Guides—Our application design center website,
www.littelfuse.com/designcenter, offers a wealth of circuit protection guidance
to help you select and apply the best circuit protection solution for your
application.
As the world's #1 brand in circuit protection, Littelfuse offers a complete
portfolio of circuit protection products. To request catalogs for the Littelfuse
portfolio of circuit protection technologies, please contact your authorized
Littelfuse product representative or visit our website at
www.littelfuse.com/catalogs
Littelfuse offers several technologies to protect sensitive electronic circuits from excess
current resulting from overloads, short circuits, power cross or ground faults. Our overcurrent
protection product line includes:
Fuses Littelfuse offers the world’s broadest range of fuse types and ratings, including
cartridge, leaded, surface mount and thin ﬁlm designs
PTC Protectors Positive Temperature Coefﬁcient thermistor technology provides
resettable current-limiting protection
Littelfuse offers multiple technologies for overvoltage suppression and switching to protect sensitive electronic
circuits from excessive voltage resulting from electrostatic discharge (ESD), load switching or lightning strikes.
Our overvoltage protection product line includes:
Varistors Littelfuse offers surface mount Multi-Layer Varistors (MLVs) and industrial
Metal Oxide Varistors (MOVs) to protect against transients
GDTs Gas Discharge Tubes (GDTs) to dissipate voltage through
a contained plasma gas
Thyristors Littelfuse's solid state switches control the ﬂow of current in
a wide range of appliances, tools and equipment
SIDACtor® Devices Overvoltage protection speciﬁcally designed for telecom
and datacom requirements
TVS Diodes Silicon transient voltage suppression (TVS) devices
SPAs Silicon Protection Arrays designed for analog and digital signal line protection
PulseGuard® ESD Suppressors Small, fast-acting Electrostatic
Discharge (ESD) suppressors
©2008 Littelfuse, Inc. Printed in USA
Speciﬁcations descriptions and illustrative material in this literature are as accurate as known at the time of publication,
but are subject to changes without notice. Visit www.littelfuse.com for the most up-to-date technical information.
FORM NO. EC111
Revision Code: EC2111v1E0804

Open as PDF

Similar pages