Hi-Reliability Optically Coupled Isolator JAN / JANTX / JANTXV 4N47, 4N48, 4N49 [A] Features: TO-78 hermetically sealed package High current transfer ratio 1 kV electrical isolation Base contact provided for conventional transistor biasing JAN, JANTX and JANTXV devices processed to MIL-PRF19500 Patent No. 4124860 Description: Each isolator in this series consists of an infrared emitting diode and a NPN silicon phototransistor, which are mounted in a hermetically sealed TO-78 package. Devices are designed for military and/or harsh environments. The suffix letter “A” denotes the collector is electrically isolated from the case. The JAN / JANTX / JANTXV 4N47, 4N47A, 4N48, 4N48A, 4N49, and 4N49A devices are processed to MIL-PRF19500/548. This series of 4N products are JEDEC registered, DSCC qualified. Please contact your local representative or OPTEK for more information. Applications: High-voltage isolation between input and output Electrical isolation in dirty environments Industrial equipment Medical equipment Office Pin # Function Pin # Function 3 Collector 5 Anode 2 Base 6 Open 1 Emitter 7 Cathode This product is built, tested and shipped from the USA OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue E 01/2014 Page 1 of 4 Hi-Reliability Optically Coupled Isolator JAN / JANTX / JANTXV 4N47, 4N48, 4N49 [A] Absolute Maximum Ratings (TA = 25° C unless otherwise noted) Storage Temperature Range -55° C to +150° C Operating Temperature Range -55° C to +125° C ± 1.00 kVDC(1) Input-to-Output Isolation Voltage 260° C(2) Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron] Input Diode Forward DC Current (65° C or below) 40 mA Reverse Voltage 2V 60 mW(3) Power Dissipation Output Phototransistor: Continuous Collector Current 50 mA Collector-Emitter Voltage 40 V Collector-Base Voltage 45 V Emitter-Base Voltage 7.0 V 300 mW(4) Power Dissipation Notes: 1. Measured with input leads shorted together and output leads shorted together. 2. RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. 3. Derate linearly 1.0 mW/° C above 65° C. 4. Derate linearly 3.0 mW/° C above 25° C. Ordering Information Part Number Isolation Voltage (kV) IF (mA) Typ / Max VCE (Volts) Max Processing MIL-PRF195000 1 1 / 40 40 548 JAN4N47 or JAN4N47A JANTX4N47 or JANTX4N47A JANTXV4N47 or JANTXV4N47A JAN4N48 or JAN4N48A JANTX4N48 or JANTX4N48A JANTXV4N48 or JANTXV4N4A8 JAN4N49 or JAN4N49A JANTX4N49 or JANTX4N49A JANTXV4N49 or JANTXV4N49A This product is built, tested and shipped from the USA OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue E 01/2014 Page 2 of 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Hi-Reliability Optically Coupled Isolator JAN / JANTX / JANTXV 4N47, 4N48, 4N49 [A] Electrical Characteristics (TA = 25°C unless otherwise noted) PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS Input Diode VF Forward Voltage 0.80 1.00 0.70 - 1.50 1.70 1.30 V IF = 10.0 mA IF = 10.0 mA, TA = -55° C(1) IF = 10.0 mA, TA = 100° C(1) IR Reverse Current - - 100 µA VR= 2.0 V V(BR)CEO Collector-Emitter Breakdown Voltage 40 - - V IC = 1.0 mA, IB= 0, IF= 0 V(BR)CBO Collector-Base Breakdown Voltage 45 - - V IC = 100 µA, IB= 0, IF= 0 V(BR)EBO Emitter-Base Breakdown Voltage 7 - - V IE = 100 µA, IC= 0, IF= 0 IC(OFF)1 Collector-Emitter Dark Current - - 100 nA VCE = 20 V, IB= 0, IF= 0 IC(OFF)2 Collector-Emitter Dark Current - - 100 µA VCE = 20 V, IB= 0, IF= 0, TA = 100° C(1) ICB(OFF) Collector-Base Dark Current - - 10 nA VCB = 20 V, IE= 0, IF= 0 JAN / JANTX / JANTXV 4N47 [A] 0.50 0.70 0.50 - - JAN / JANTX / JANTXV 4N48 [A] 1.00 1.40 1.00 - 5 - JAN / JANTX / JANTXV 4N49 [A] 2.00 2.80 2.00 - 10 - 30 - - - - 0.30 0.30 0.30 100 - - V VCE = 5.0 V , IC = 10.0 mA, IF = 0 mA 11 - - Ω VI-O = ± 1000 VDC(3) Output Phototransistor Coupled On-State Collector Current IC(ON) ICB(ON) On-State Collector Base IF = 1.0 mA, VCE = 5.0 V, IB = 0 (1) IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = -55° C (1) IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = 100° C mA IF = 1.0 mA, VCE = 5.0 V, IB = 0 (1) IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = -55° C (1) IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = 100° C IF = 1.0 mA, VCE = 5.0 V, IB = 0 (1) IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = -55° C (1) IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = 100° C µA VCB = 5 V, IE = 0, IF = 10 mA Collector-Emitter Saturation Voltage VCE(SAT) HFE JAN / JANTX / JANTXV 4N47 [A] JAN / JANTX / JANTXV 4N48 [A] JAN / JANTX / JANTXV 4N49 [A] DC Current Gain V IF = 2.0 mA, IC = 0.5 mA, IB = 0 IF = 2.0 mA, IC = 1.0 mA, IB = 0 IF = 2.0 mA, IC = 2.0 mA, IB = 0 RIO Resistance (Input-to-Output) CIO Capacitance (Input-to-Output) - - 5 pF VI-O = 0 V, f = 1.0 MHz(3) Rise and Fall Time - - 20 µs VCC = 10.0 V , IF = 5.0 mA, RL = 100 Ω TR, TF 10 Notes: 1. Guaranteed but not tested. 2. Sample tested, LTPD = 10. 3. Measured with input leads shorted together and output leads shorted together. This product is built, tested and shipped from the USA OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue E 01/2014 Page 3 of 4 Hi-Reliability Optically Coupled Isolator JAN / JANTX / JANTXV 4N47, 4N48, 4N49 [A] Typical Performance Curves Forw ard Voltage vs Forw ard Current vs Tem perature -55° V F - Forward Voltage (V) 1.5 1.4 -35° 1.3 -15° 1.2 +5° 1.1 +25° 1.0 +45° 0.9 +65° 0.8 0 5 10 15 20 +85° 25 IF - Forw ard Current (m A) +105° -55° Collector Current vs Forw ard Current vs Tem perature 700% IC(ON) - Normalized Collector Current (%) -35° Normalized at +25°C 600% -15° 500% +5° 400% +25° 300% +45° 200% +65° 100% +85° 0% 0.0 1.0 2.0 3.0 4.0 +105° 5.0 IF - Forw ard current (mA) +125° Normalized Collector Current Vs Temperature Normalized Collector Current Vs Temperature 140% Normalized Collector Current (%) I F = 1 mA and V CE = 5 100% I F = 1mA 80% 60% 40% 20% 0% -55° -35° -15° +5° +25° +45° +65° +85° +105° +125° Normalized Collector Current (%) 140% Nor mal i z ed at +25°C 120% Nor mal ized at +25°C IF = 2 mA and VCE = 5 V 120% 100% IF = 2mA 80% 60% 40% 20% 0% Temperature (°C) -55° -35° -15° +5° +25° +45° +65° +85° +105° +125° Temperature (°C) This product is built, tested and shipped from the USA OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue E 01/2014 Page 4 of 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com