Type OptiMOS 3 Power-Transistor IPD060N03L G IPF060N03L G IPS060N03L G IPU060N03L G ™ Product Summary Features • Fast switching MOSFET for SMPS • Optimized technology for DC/DC converters V DS 30 V R DS(on),max 6 mΩ ID 50 A 1) • Qualified according to JEDEC for target applications • N-channel, logic level • Excellent gate charge x R DS(on) product (FOM) • Very low on-resistance R DS(on) • Avalanche rated • Pb-free plating IPD060N03L G Type • Avalanche rated IPF060N03L G IPS060N03L G IPU060N03L G • Pb-free plating; RoHS compliant Package PG-TO252-3 PG-TO252-3-23 PG-TO251-3-11 PG-TO251-3 Marking 060N03L 060N03L 060N03L 060N03L Maximum ratings, at T j=25 °C, unless otherwise specified Parameter Symbol Conditions Continuous drain current ID Value V GS=10 V, T C=25 °C 50 V GS=10 V, T C=100 °C 50 V GS=4.5 V, T C=25 °C 50 V GS=4.5 V, T C=100 °C 43 Unit A Pulsed drain current2) I D,pulse T C=25 °C 350 Avalanche current, single pulse 3) I AS T C=25 °C 50 Avalanche energy, single pulse E AS I D=20 A, R GS=25 Ω 60 mJ Reverse diode dv /dt dv /dt I D=50 A, V DS=24 V, di /dt =200 A/µs, T j,max=175 °C 6 kV/µs Gate source voltage V GS 1) Rev. 2.0 ±20 V J-STD20 and JESD22 page 1 2010-02-23 IPD060N03L G IPF060N03L G IPS060N03L G IPU060N03L G Maximum ratings, at T j=25 °C, unless otherwise specified Parameter Symbol Conditions Power dissipation P tot Operating and storage temperature T j, T stg Value T C=25 °C IEC climatic category; DIN IEC 68-1 Parameter Unit 56 W -55 ... 175 °C 55/175/56 Values Symbol Conditions Unit min. typ. max. - - 2.7 minimal footprint - - 75 6 cm² cooling area 4) - - 50 30 - - Thermal characteristics Thermal resistance, junction - case R thJC SMD version, device on PCB R thJA K/W Electrical characteristics, at T j=25 °C, unless otherwise specified Static characteristics Drain-source breakdown voltage V (BR)DSS V GS=0 V, I D=1 mA Gate threshold voltage V GS(th) V DS=V GS, I D=250 µA 1 - 2.2 Zero gate voltage drain current I DSS V DS=30 V, V GS=0 V, T j=25 °C - 0.1 1 V DS=30 V, V GS=0 V, T j=125 °C - 10 100 I GSS V GS=20 V, V DS=0 V - 10 100 nA R DS(on) V GS=4.5 V, I D=30 A - 7.2 9 mΩ V GS=10 V, I D=30 A - 5 6 - 1.4 - Ω 34 67 - S Gate-source leakage current Drain-source on-state resistance 5) Gate resistance RG Transconductance g fs 2) See figure 3 for more detailed information 3) See figure 13 for more detailed information |V DS|>2|I D|R DS(on)max, I D=30 A V µA 4) Device on 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm2 (one layer, 70 µm thick) copper area for drain connection. PCB is vertical in still air. 5) Rev. 2.0 Measured from drain tab to source pin page 2 2010-02-23 Parameter IPD060N03L G IPF060N03L G IPS060N03L G IPU060N03L G Values Symbol Conditions Unit min. typ. max. - 1700 2300 - 640 850 Dynamic characteristics Input capacitance C iss V GS=0 V, V DS=15 V, f =1 MHz Output capacitance C oss Reverse transfer capacitance Crss - 35 52 Turn-on delay time t d(on) - 5 - Rise time tr - 3 - Turn-off delay time t d(off) - 20 - Fall time tf - 3 - Gate to source charge Q gs - 5.6 - Gate charge at threshold Q g(th) - 2.8 - Gate to drain charge Q gd - 2.5 - Switching charge Q sw - 5.3 - Gate charge total Qg - 10.8 14.4 Gate plateau voltage V plateau - 3.2 - Gate charge total Qg V DD=15 V, I D=30 A, V GS=0 to 10 V - 22 30 Gate charge total, sync. FET Q g(sync) V DS=0.1 V, V GS=0 to 4.5 V - 9.4 - Output charge Q oss V DD=15 V, V GS=0 V - 17 - - - 50 - - 350 V DD=15 V, V GS=10 V, I D=30 A, R G=1.6 Ω pF ns Gate Charge Characteristics 6) V DD=15 V, I D=30 A, V GS=0 to 4.5 V nC V nC Reverse Diode Diode continuous forward current IS Diode pulse current I S,pulse Diode forward voltage V SD V GS=0 V, I F=30 A, T j=25 °C - 0.88 1.1 V Reverse recovery charge Q rr V R=15 V, I F=I S, di F/dt =400 A/µs - - 10 nC 6) Rev. 2.0 T C=25 °C A See figure 16 for gate charge parameter definition page 3 2010-02-23 IPD060N03L G IPF060N03L G IPS060N03L G IPU060N03L G 2 Drain current P tot=f(T C) I D=f(T C); V GS≥10 V 60 60 50 50 40 40 I D [A] P tot [W] 1 Power dissipation 30 30 20 20 10 10 0 0 0 50 100 150 200 0 50 100 T C [°C] 150 3 Safe operating area 4 Max. transient thermal impedance I D=f(V DS); T C=25 °C; D =0 Z thJC=f(t p) parameter: t p parameter: D =t p/T 103 10 limited by on-state resistance 1 µs 10 µs 102 0.5 1 101 0.2 Z thJC [K/W] 100 µs DC I D [A] 200 T C [°C] 1 ms 0.1 0.05 0.02 0.1 10 ms 0.01 100 single pulse 10-1 10-1 100 101 102 0 0 0 0 0 0 1 10-6 10-5 10-4 10-3 10-2 10-1 100 t p [s] V DS [V] Rev. 2.0 0.01 page 4 2010-02-23 IPD060N03L G IPF060N03L G IPS060N03L G IPU060N03L G 5 Typ. output characteristics 6 Typ. drain-source on resistance I D=f(V DS); T j=25 °C R DS(on)=f(I D); T j=25 °C parameter: V GS parameter: V GS 120 20 5V 4.5 V 10 V 100 3V 16 4V 3.5 V 3.2 V R DS(on) [mΩ] I D [A] 80 60 3.5 V 12 4V 8 4.5 V 40 10 V 3.2 V 11.5 V 4 20 5V 3V 2.8 V 0 0 0 1 2 3 0 20 40 V DS [V] 60 80 100 80 100 I D [A] 7 Typ. transfer characteristics 8 Typ. forward transconductance I D=f(V GS); |V DS|>2|I D|R DS(on)max g fs=f(I D); T j=25 °C parameter: T j 100 80 80 60 60 I D [A] g fs [S] 100 40 40 20 20 175 °C 25 °C 0 0 0 1 2 3 4 5 Rev. 2.0 0 20 40 60 I D [A] V GS [V] page 5 2010-02-23 IPD060N03L G IPF060N03L G IPS060N03L G IPU060N03L G 9 Drain-source on-state resistance 10 Typ. gate threshold voltage R DS(on)=f(T j); I D=30 A; V GS=10 V V GS(th)=f(T j); V GS=V DS; I D=250 µA 12 2.5 10 2 V GS(th) [V] R DS(on) [mΩ] 8 98 % 6 typ 1.5 1 4 0.5 2 0 0 -60 -20 20 60 100 140 180 -60 -20 20 60 100 140 180 T j [°C] T j [°C] 11 Typ. capacitances 12 Forward characteristics of reverse diode C =f(V DS); V GS=0 V; f =1 MHz I F=f(V SD) parameter: T j 104 10000 103 1000 1000 Ciss 100 Coss 175 °C, 98% I F [A] C [pF] 25 °C 102 175 °C 25 °C, 98% 10 100 Crss 101 1 10 0 5 10 15 20 25 30 Rev. 2.0 0.0 0.5 1.0 1.5 2.0 V SD [V] V DS [V] page 6 2010-02-23 IPD060N03L G IPF060N03L G IPS060N03L G IPU060N03L G 13 Avalanche characteristics 14 Typ. gate charge I AS=f(t AV); R GS=25 Ω V GS=f(Q gate); I D=30 A pulsed parameter: T j(start) parameter: V DD 12 100 15 V 6V 24 V 10 100 °C 25 °C 8 V GS [V] I AV [A] 150 °C 10 6 4 2 1 0 10-1 100 101 102 103 0 5 t AV [µs] 10 15 20 25 30 Q gate [nC] 15 Drain-source breakdown voltage 16 Gate charge waveforms V BR(DSS)=f(T j); I D=1 mA 34 V GS Qg 32 V BR(DSS) [V] 30 28 26 V g s(th) 24 Q g(th) 22 Q sw Q gs 20 -60 -20 20 60 100 140 Q g ate Q gd 180 T j [°C] Rev. 2.0 page 7 2010-02-23 Package Outline Rev. 2.0 IPD060N03L G IPF060N03L G IPS060N03L G IPU060N03L G PG-TO252-3 page 8 2010-02-23 Package Outline IPD060N03L G IPF060N03L G IPS060N03L G IPU060N03L G PG-TO252-3-23 PG-TO251-3-11: Outline PG-TO251-3-21: Outline Rev. 2.0 page 9 2010-02-23 Package Outline Rev. 2.0 IPD060N03L G IPF060N03L G IPS060N03L G IPU060N03L G PG-TO251-3-11 page 10 2010-02-23 Package Outline IPD060N03L G IPF060N03L G IPS060N03L G IPU060N03L G PG-TO251-3 PG-TO251-3-11: Outline PG-TO251-3-21: Outline Rev. 2.0 page 11 2010-02-23 IPD060N03L G IPF060N03L G IPS060N03L G IPU060N03L G Published by Infineon Technologies AG 81726 Munich, Germany © 2008 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Rev. 2.0 page 12 2010-02-23