CCP chip fuse EU features • • • • • • • • Immediate cut-off of excessive heat No generation of heat UL94V0 epoxy case Suitable for flow and reflow soldering UL248.14, file #131375 One-time fuse device Marking: Black body color with white marking Products with lead-free terminations meet EU RoHS and China RoHS requirements dimensions and construction L Size Code W 2B h t 2E L W Dimensions inches (mm) t h .063±.008 .047±.008 .031±.004 .126±.008 (1.6±0.2) (1.2±0.2) (0.8±0.1) (3.2±0.2) .098±.008 .087±.008 .075±.004 (2.5±0.2) (2.2±0.2) (1.9±0.1) e d .047±.004 .024±.004 (1.2±0.1) (0.6±0.1) .067±.004 .02±.004 (1.7±0.1) (0.5±0.1) Electrode e Molded Resin d Buffer Fuse Element ordering information New Part # CCP 2B 20 Type Size Code Rating 2B: 1206 2E: 1210 Reference rating chart Nil T Fusing Magnification Nil: 2B, 2E: 250% H: 2E: 200% Termination Material T: Sn TE Packaging TE: 7" embossed plastic (2B - 3,000 pieces/reel) (2E - 2,000 pieces/reel) Part Designation Current Rating Fusing Current Fusing Time Internal R. Maximum (mΩ) Maximum Open Circuit Voltage* CCP2B15 0.75A 1.5A 150 CCP2B20 1.00A 2.0A 100 CCP2B25 1.25A 2.5A 75 CCP2B30 1.50A 3.0A 60 CCP2B35 1.75A 3.5A 50 24V CCP2B40 2.00A 4.0A 45 (40V/76V)* CCP2B50 2.50A 5.0A 35 CCP2B63 3.15A 6.3A 23 CCP2B80 4.00A 8.0A 19 1 second max. CCP2B100 5.00A 10.0A 15 @ fusing current CCP2E10H 1.0A 0.50A 200 CCP2E13H 1.3A 0.65A 170 CCP2E15H 1.5A 0.75A 150 CCP2E20H 1.00A 2.0A 100 72V CCP2E25H 2.5A 1.25A 75 CCP2E30H 1.50A 3.0A 60 CCP2E35H 1.75A 3.5A 50 CCP2E38H 1.90A 3.8A 48 * Note: High rated voltage (76V: 0.75A ~ 3.15A; 40V: 4A ~ 5A) also available, please contact KOA. Rated Ambient Temperature Operating Temperature Range +70°C -40°C to +125°C For further information on packaging, please refer to Appendix A. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 1/14/11 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 239 circuit protection applications and ratings CCP chip fuse applications and ratings (continued) Part Designation Current Rating Fusing Current CCP2E40H CCP2E45H CCP2E50H CCP2E63H CCP2E100 CCP2E10 CCP2E13 CCP2E15 CCP2E20 CCP2E25 CCP2E30 CCP2E35 CCP2E38 CCP2E40 CCP2E45 CCP2E50 CCP2E63 2.00A 2.25A 2.50A 3.15A 4.00A 0.4A 0.52A 0.6A 0.8A 1.0A 1.2A 1.4A 1.5A 1.6A 1.8A 2.0A 2.5A 4.0A 4.5A 5.0A 6.3A 10.0A 1.0A 1.3A 1.5A 2.0A 2.5A 3.0A 3.5A 3.8A 4.0A 4.5A 5.0A 6.3A Fusing Time Internal R. Maximum (mΩ) Maximum Open Circuit Voltage Rated Ambient Temperature Operating Temperature Range 1 second max. @ fusing current 45 40 35 23 15 200 170 150 100 75 60 50 48 45 40 35 23 72V +70°C -40°C to +125°C environmental applications Derating Curve Fusing Characteristics CCP2B 100 1520 2530 3540 50 10 63 80 CCP2E, CCP2E H 100 10 131520 2530353840 45 50 10 63 100 60 40 20 0 -40 -20 0 20 40 60 80 100 120 140 160 180 70 125 175 Ambient Temperature (°C) Fusing Time (Sec.) Fusing Time (Sec.) % Rated Power 80 1 .1 .01 .001 0 1 2 3 4 5 6 7 8 9 10 11 12 1 .1 .01 .001 0 1 2 3 Fusing Current (A) 4 5 6 7 8 9 10 11 12 Fusing Current (A) circuit protection Performance Characteristics Parameter Fusing Characteristics Open Circuit Voltage Residual Resistance Bending Test Requirement ∆ R±% Limit Typical Within 1 second — No fusing, flaming, explosion 10kΩ or more No mechanical damages — — — Test Method CCP2B: 200% of rated current shall be carried CCP2E: 250% of rated current shall be carried CCP2E H: 200% of rated current shall be carried Apply DC voltage between the termination after fusing. CCP2B: 24V; CCP2E, CCP2E H: 72V Measure DC resistance after fusing Distance between holding points 90mm, bending width 10mm, 1 time ±10% ±2.5% ±95% coverage min. ±10% — ±3% Load Life Moisture ±10% ±1.5% 40°C ± 2°C, 90 - 95% RH, 1000 hours, rated current, 1.5 hr ON, 0.5 hr OFF cycle Rapid Change of Temperature ±10% ±4.0% -40°C (30 minutes), +125°C (30 minutes), 10 cycles No evidence of damages to protective coating and marking — Resistance to Soldering Heat Solderability Load Life Resistance to Solvent 260°C ±5°C, 10 seconds ± 0.5 seconds, 2 cycles 230°C ±5°C, 3 seconds ± 0.5 seconds 70°C ± 3°C, 1000 hours, rated current, 1.5 hr ON, 0.5 hr OFF cycle Conforming to MIL-STD-202F Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 240 11/23/10 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com