ORing IGPS-1042GP-24V Industrial 6-port unmanaged gigabit poe ethernet switch Datasheet

Industrial Ethernet Switch DIN-Rail Unmanaged Gigabit PoE Ethernet Switch
v2.0 / Apr, 2017
IGPS-1042GP-24V
IGPS-1042GP-24V
Industrial 6-port unmanaged Gigabit PoE Ethernet switch with
4x10/100/1000Base-T(X) P.S.E. and 2x100/1000Base-X, SFP socket,
24VDC power input
Industrial Ethernet Switch
1
Features
▪ IGPS-1042GP-24V provide 4x10/100/1000Base-T(X) PoE (P.S.E.) ports
▪ Supports P.S.E. based on IEEE 802.3at standard up to 30 Watts per port and total
power budget is 120Watts.
▪ Advanced PoE power boost technology to support dual 24VDC power inputs
▪ Supports Jumbo frame up to 10KBytes
▪ SFP port supports 100Base-FX and 1000Base-X speed
▪ Supports auto-negotiation and auto-MDI/MDI-X
▪ Supports store and forward transmission
▪ Supports flow control
▪ Rigid IP-30 housing design
▪ DIN-Rail and wall mounting enabled
Introduction
IGPS-1042GP-24V is an unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1042GP-24V supports Power over Ethernet, a system to transmit
electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1042GP-24V has 4x10/100/1000Base-T(X)
P.S.E. (Power Sourcing Equipment) ports and 2x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIPSwitch below. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 75oC
can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
Practical Operation
IGPS-1042GP-24V can be used in connecting several PoE P.D. Ethernet devices like IP-Camera or other Ethernet devices. In addition, there are two different
power inputs at terminal block to avoid interruption caused by power down. When the primary DC power input fails, the backup power input will take over
immediately to guarantee a non-stop operation.
Control Center
Control Center
Optic Fiber
IGPS-1042GP-24V
PoE Link
Connections of Ethernet devices
1-376
w w w.oring - net wo rk in g.co m
Industrial Ethernet Switch DIN-Rail Unmanaged Gigabit PoE Ethernet Switch
v2.0 / Apr, 2017
10/100Base-T(X) P.S.E. RJ-45 Port
1000Base-T P.S.E. RJ-45 Port
RJ-45 Pin Definition
RJ-45 Pin Definition
Description
Pin No.
Description
#1
TD+ with PoE Power input +
#1
BI_DA+ with PoE Power input +
#2
TD- with PoE Power input +
#2
BI_DA- with PoE Power input +
#3
RD+ with PoE Power input -
#3
BI_DB+ with PoE Power input -
#6
RD- with PoE Power input -
#4
BI_DC+
BI_DC-
#6
BI_DB- with PoE Power input -
#7
BI_DD+
#8
BI_DD-
Industrial
Device Server
#5
Industrial
Media Converter
Pin No.
Industrial
Ethernet Switch
PoE Pin Definition
Dimensions
Industrial Wireless
Access Point
Industrial Cellular
VPN Router
Industrial
M2M Gateway
Accessories
Network
Management Software
(Unit=mm)
D esign ed for R u gged E xcellence
1-377
Industrial Ethernet Switch DIN-Rail Unmanaged Gigabit PoE Ethernet Switch
v2.0 / Apr, 2017
Specifications
ORing Switch Model
IGPS-1042GP-24V
Physical Ports
Industrial Ethernet Switch
1
10/100/1000Base-T(X) Ports in RJ45 with P.S.E. Auto
MDI/MDIX
4
100/1000Base-X SFP port
2
Technology
Ethernet Standards
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table
1K MAC addresses
Processing
Store-and-Forward
Jumbo Frame
Up to 10K Bytes
LED Indicators
Power indicator
Green : Power LED x 2
Fault indicator
Amber : Indicate PWR1 or PWR2 failure
10/100/1000Base-T(X) RJ45 port indicator and PoE
indicator (P1 ~ P4)
Green for port Link/Act.
Green for power injected.
100/1000Base-X SFP port indicator
Green for port Link/Act.
SFP Speed DIP-Switch
DIP-Switch 1/2
DIP-Switch 1 (ON) and DIP-Switch 2 (ON) : SFP speed setting to 100Mbps
DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) : SFP speed setting to 1000Mbps
DIP-Switch
DIP-Switch 1
Power-1 failed warning : (ON) enable, (OFF) disable
DIP-Switch 2
Power-2 failed warning : (ON) enable, (OFF) disable
Fault contact
Relay
Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input power
Dual DC inputs. 12~57VDC on 6-pin terminal block.
PoE Power Budget
60Watts at 12VDC / 120Watts(24~57VDC)
Power consumption (Typ.)
7 Watts (power device not included)
Overload current protection
Present
Reverse polarity protection
Present
Physical Characteristics
Enclosure
IP-30
Dimensions (W x D x H)
41 (W) x 94.9 (D) x 144.3(H) mm (1.61 x 3.74 x 5.68 inches)
Weight (g)
650 g
Environmental
Storage temperature
-40 to 85oC (-40 to 185oF)
Operating temperature
-40 to 75oC (-40 to 167oF)
Operating humidity
5% to 95% Non-condensing
Regulatory Approvals
1-378
EMC
EN 55032, EN 55024(CE EMC), FCC Part 15 B, EN 550121-1, EN 50121-3-2(EN50155), EN 61000-3-2,
EN 61000-3-3
EMI
CISPR 32, EN 55032, FCC Part 15 B class A ,C-Tick
w w w.oring - net wo rk in g.co m
Industrial Ethernet Switch DIN-Rail Unmanaged Gigabit PoE Ethernet Switch
v2.0 / Apr, 2017
Shock
IEC 60068-2-27
Free Fall
IEC 60068-2-31
Vibration
IEC 60068-2-6
Safety
EN 60950-1
MTBF
833512 hours
Warranty
5 years
Industrial
Media Converter
IEC 61000-4-2 (ESD), IEC 61000-4-3 (RS), IEC 61000-4-4 (EFT), IEC 61000-4-5 (Surge), IEC 61000-4-6 (CS), IEC 61000-48 (PFMF), IEC 61000-4-11(DIP)
Industrial
Ethernet Switch
EMS
Ordering Information
I G P S -1 A A B CC -2 4 V
Option
- 4: 4 ports
Model Name
IGPS-1042GP-24V
- 2: 2 port
Additional Port Type
- GP: 100/1000Base-X SFP
Description
Industrial 6-port unmanaged Gigabit PoE Ethernet switch with 4x10/100/1000Base-T(X) P.S.E and 2x100/1000Base-X,
SFP socket, 24VDC power inputs
Optional Accessories (Can be purchased separately)
‧SFP100 series : 100Mbps SFP optical transceiver
‧DR/SDR/DRP 48V Series DIN-Rail power supply
‧SFP 1G series : 1Gbps SFP optical transceiver
Industrial Cellular
VPN Router
Packing List
‧IGPS-1042GP-24V
‧DIN-Rail Kit
‧Wall-mount Kit
‧Quick Installation Guide
Additional Port Number
Industrial Wireless
Access Point
Available
Model
10/100/1000Base-T(X) P.S.E. Port Number
Industrial
Device Server
Code Definition
Industrial
M2M Gateway
Accessories
Network
Management Software
D esign ed for R u gged E xcellence
1-379
Similar pages