GLENAIR FO1006-1-1-101610A Fiber optic patch cord Datasheet

Test Probes
and Adapters
FO1006
Glenair Fiber Optic Patch Cord
FO 1006-1-1-XXXX-09 A
Temperature Rating
A = -40°C to +85°C
B = -55°C to +125°C
C = Customer Specified
(See Note 3)
Product Series
Basic Number
Connector/Terminus Type
End A
End B
0 = ST Connector, M83522/16 Style
1 = ST Connector
2 = FC Connector
3 = SC Connector
4 = Glenair Socket Terminus M29504/5 Style (181-001)
5 = Glenair Pin Terminus M29504/4 Style (181-002)
6 = SMA Connector (906)
7 = LC Connector
8 = SMA Connector (905)
9 = Customer Specified
10 = GHD Terminus, PC (181-047)
11 = Glenair Pin Terminus, Front Release (181-012)
12 = Glenair Socket Terminus, Front Release (181-011)
13 = Left Blank for Future Use
14 = Glenair Pin Terminus, M29504/14 Style (181-039)
15 = Glenair Socket Terminus, M29504/15 Style (181-040)
Fiber Size
05 = 5.8/125 Singlemode
07 = 7.5/125 Singlemode
09 = 9.3/125 Singlemode
50 = 50/125 Multimode
62 = 62.5/125 Multimode
10 = 100/140 Multimode
20 = 200/230 Multimode
1K = 1000uM Multimode
CS = Customer Specified Singlemode
CM = Customer Specified Multimode
Length (Inches)
See P/N Development
4.0" (101.6) Max
4.0" (101.6) Max
End A
End B
See Note 2
See Note 2
APPLICATION NOTES
1. Optical performance: insertion loss to be less than 1.5 dB
when measured at 850 nm wavelength for Multimode
and 1310 nm wavelength for Singlemode.
2. Assy is marked with the Glenair PN in two places.
3 “A” Temperature rating use TRA-BOND F113 Epoxy.
“B” Temperature rating use EPO-TEK 353ND Epoxy.
“C” Temperature rating as per customer specification.
4. Metric dimensions (mm) are indicated in parentheses.
5. For angle polish, add “A” to end of Connector/Terminus
Type Number (otherwise omit). Type numbers, 4, 5, 11,
12 14, and 15 do not allow angle polish.
6. For military qualified product, add “M” to end of
Connector/Terminus Type number (otherwise omit).
Type number 4, 5, 14, and 15 only.
© 2006 Glenair, Inc.
CAGE Code 06324
STANDARD
TOLERANCE
LENGTH
TOLERANCE
5 in to 2 ft.
+1 in -0
2 to 10 ft.
+3 in -0
10 to 50 ft.
+6 in -0
50 to 100 ft.
+1 ft -0
100 ft. and up
+2 ft -0
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
L-26
www.glenair.com
Similar pages