MTRONPTI M3R13TAJ 9x14 mm, 3.3 volt, hcmos/ttl, clock oscillator Datasheet

M3R Series
9x14
mm, 3.3 Volt, HCMOS/TTL, Clock Oscillator
M3R Series
9x14 mm, 3.3 Volt, HCMOS/TTL, Clock Oscillator
Pin Connections
Pin Connections
NOTE: A capacitor of value 0.01
µF or greater between Vdd and
Ground is recommended.
NOTE: A capacitor of value
0.01 mF or greater between Vdd
and Ground is recommended.
1. See load circuit diagram #2 on page 116.
2. Rise/Fall times are measured between 10% Vdd and 90% Vdd with HCMOS load.
3. TTL output drive capability is 2 TTL (10 LS - TTL).
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see
www.mtronpti.com
our changes
complete
and detailed
datasheets.
Contact
us for
yournotice.
application
specific
requirements:
MtronPTI
MtronPTI
reserves the right tofor
make
to offering
the product(s)
and service(s)
described
herein
without
No liability
is assumed
as a result
of their1-800-762-8800.
use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.
94
Revision: 8-21-07
MtronPTI Lead Free Solder Profile
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.
Similar pages