APM2055NU N-Channel Enhancement Mode MOSFET Features • Pin Description 20V/10A , RDS(ON)=55mΩ (typ.) @ VGS=10V RDS(ON)=75mΩ (typ.) @ VGS=4.5V RDS(ON)=140mΩ (typ.) @ VGS=2.5V • • • G D S Super High Dense Cell Design Top View of TO-252 Reliable and Rugged Lead Free Available (RoHS Compliant) D Applications • G Power Management in Desktop Computer or DC/DC Converters S N-Channel MOSFET Ordering and Marking Information Package Code U : TO-252 Operating Junction Temp. Range C : -55 to 150 °C Handling Code TU : Tube TR : Tape & Reel Lead Free Code L : Lead Free Device Blank : Original Device APM2055N Lead Free Code Handling Code Temp. Range Package Code APM2055N U : APM2055N XXXXX XXXXX - Date Code Note: ANPEC lead-free products contain molding compounds and 100% matte tin plate termination finish; which are fully compliant with RoHS and compatible with both SnPb and lead-free soldiering operations. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J STD-020C for MSL classification at lead-free peak reflow temperature. ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright ANPEC Electronics Corp. Rev. B.3 - Oct., 2005 1 www.anpec.com.tw APM2055NU Absolute Maximum Ratings Symbol Parameter Rating Unit Common Ratings (TA=25°C Unless Otherwise Noted) VDSS Drain-Source Voltage 20 VGSS Gate-Source Voltage ±16 Maximum Junction Temperature 150 °C -55 to 150 °C TC=25°C 3.5 A TC=25°C 30 TC=100°C 15 TC=25°C 10* TC=100°C 6 TC=25°C 50 TC=100°C 20 TJ TSTG IS Storage Temperature Range Diode Continuous Forward Current V Mounted on Large Heat Sink IDP 300µs Pulse Drain Current Tested ID Continuous Drain Current PD Maximum Power Dissipation RθJC 2.5 Thermal Resistance-Junction to Case A A W °C/W 2 Mounted on PCB of 1in Pad Area IDP 300µs Pulse Drain Current Tested ID Continuous Drain Current PD Maximum Power Dissipation RθJA TA=25°C 30 TA=100°C 15 TA=25°C 2 TA=100°C 1 TA=25°C 2.5 TA=100°C 1 Thermal Resistance-Junction to Ambient 50 A A W °C/W Mounted on PCB of Minimum Footprint IDP 300µs Pulse Drain Current Tested ID Continuous Drain Current PD Maximum Power Dissipation RθJA Thermal Resistance-Junction to Ambient TA=25°C 30 TA=100°C 15 TA=25°C 2 TA=100°C 1 TA=25°C 1.6 TA=100°C 0.6 75 A A W °C/W Note: * Current limited by bond wire. Copyright ANPEC Electronics Corp. Rev. B.3 - Oct., 2005 2 www.anpec.com.tw APM2055NU Electrical Characteristics Symbol Parameter (TA = 25°C unless otherwise noted) Test Condition APM2055NU Min. Typ. Max. Unit Static Characteristics BVDSS Drain-Source Breakdown Voltage IDSS Zero Gate Voltage Drain Current VGS(th) IGSS RDS(ON) a VGS=0V, IDS=250µA V VDS=16V, VGS=0V 1 TJ=85°C Gate Threshold Voltage VDS=VGS, IDS=250µA Gate Leakage Current VGS=±16V, VDS=0V Drain-Source On-state Resistance 20 30 0.6 0.9 µA 1.5 V ±100 nA VGS=10V, IDS=12A 55 70 VGS=4.5V, IDS=6A 75 90 VGS=2.5V, IDS=2A 140 160 ISD=2A, VGS=0V 0.7 1.3 VGS=0V,VDS=0V,F=1MHz 2.5 mΩ Diode Characteristics a VSD Diode Forward Voltage V Dynamic Characteristics b RG Gate Resistance Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance td(ON) Turn-on Delay Time Tr Turn-on Rise Time td(OFF) Turn-off Delay Time Tf VGS=0V, VDS=15V, Frequency=1.0MHz VDD=10V, RL=10Ω, IDS=1A, VGEN=4.5V, RG=6Ω Turn-off Fall Time Ω 380 pF 120 75 5 8 13 23 16 24 3 5 5.4 7 ns Gate Charge Characteristics b Qg Total Gate Charge Qgs Gate-Source Charge Qgd Gate-Drain Charge Notes: VDS=10V, VGS=4.5V, IDS=12A 1.4 nC 1.7 a : Pulse test ; pulse width≤300µs, duty cycle≤2%. b : Guaranteed by design, not subject to production testing. Copyright ANPEC Electronics Corp. Rev. B.3 - Oct., 2005 3 www.anpec.com.tw APM2055NU Typical Characteristics Drain Current 60 12 50 10 ID - Drain Current (A) Ptot - Power (W) Power Dissipation 40 30 20 8 6 4 2 10 o 0 o TC=25 C 0 0 20 40 60 80 100 120 140 160 180 20 40 60 80 100 120 140 160 180 Tj - Junction Temperature (°C) Safe Operation Area Thermal Transient Impedance Normalized Transient Thermal Resistance 1ms Rd s(o n) Lim it ID - Drain Current (A) 0 Tj - Junction Temperature (°C) 100 10 TC=25 C,VG=10V 10ms 100ms 1s DC 1 o TC=25 C 0.1 0.1 1 10 Rev. B.3 - Oct., 2005 1 Duty = 0.5 0.2 0.1 0.05 0.1 0.02 0.01 Single Pulse 2 0.01 1E-4 1E-3 60 Mounted on 1in pad o RθJA :50 C/W 0.01 0.1 1 10 100 Square Wave Pulse Duration (sec) VDS - Drain - Source Voltage (V) Copyright ANPEC Electronics Corp. 2 4 www.anpec.com.tw APM2055NU Typical Characteristics (Cont.) Drain-Source On Resistance Output Characteristics 30 200 VGS=5,6,7,8,9,10V VGS=2.5V 180 4V RDS(ON) - On - Resistance (mΩ) ID - Drain Current (A) 25 20 15 3V 10 5 0 0.0 2V 0.5 1.0 1.5 2.0 160 140 VGS=4.5V 120 100 80 VGS=10V 60 40 20 2.5 0 3.0 0 5 10 15 20 25 VDS - Drain - Source Voltage (V) ID - Drain Current (A) Transfer Characteristics Gate Threshold Voltage 30 1.8 30 IDS =250µA Normalized Threshold Vlotage 1.6 ID - Drain Current (A) 25 20 15 o Tj=125 C 10 o Tj=-55 C 5 0 0.0 o Tj=25 C 0.5 1.0 1.2 1.0 0.8 0.6 0.4 0.2 1.5 2.0 2.5 0.0 -50 -25 3.0 Copyright ANPEC Electronics Corp. 0 25 50 75 100 125 150 Tj - Junction Temperature (°C) VGS - Gate - Source Voltage (V) Rev. B.3 - Oct., 2005 1.4 5 www.anpec.com.tw APM2055NU Typical Characteristics (Cont.) Drain-Source On Resistance Source-Drain Diode Forward 30 2.2 IDS = 12A 1.8 1.6 o IS - Source Current (A) Normalized On Resistance 2.0 VGS = 10V 1.4 1.2 1.0 0.8 0.6 Tj=150 C 10 o Tj=25 C 0.4 0.2 o RON@Tj=25 C: 55mΩ 0.0 -50 -25 0 25 50 1 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 75 100 125 150 Tj - Junction Temperature (°C) VSD - Source - Drain Voltage (V) Capacitance Gate Charge 10 700 VDS=15V Frequency=1MHz 9 ID = 12A VGS - Gate-source Voltage (V) C - Capacitance (pF) 600 500 Ciss 400 300 200 Coss 100 Crss 8 7 6 5 4 3 2 1 0 0 4 8 12 16 0 20 Rev. B.3 - Oct., 2005 2 4 6 8 10 12 QG - Gate Charge (nC) VDS - Drain - Source Voltage (V) Copyright ANPEC Electronics Corp. 0 6 www.anpec.com.tw APM2055NU Package Information TO-252 (Reference JEDEC Registration TO-252) E A b2 C1 L2 D H L1 L b C e1 D1 A1 E1 Dim Millimeters Inches Min. Max. Min. Max. A 2.18 2.39 0.086 0.094 A1 0.89 1.27 0.035 0.050 b 0.508 0.89 0.020 0.035 b2 5.207 5.461 0.205 0.215 C 0.46 0.58 0.018 0.023 C1 0.46 0.58 0.018 0.023 D 5.334 6.22 0.210 0.245 6.73 0.250 D1 E 5.2 REF 6.35 E1 0.205 REF 5.3 REF 0.265 0.209 REF e1 3.96 5.18 0.156 0.204 H 9.398 10.41 0.370 0.410 L 0.51 L1 0.64 1.02 0.025 0.040 L2 0.89 2.032 0.035 0.080 Copyright ANPEC Electronics Corp. Rev. B.3 - Oct., 2005 0.020 7 www.anpec.com.tw APM2055NU Physical Specifications Terminal Material Lead Solderability Solder-Plated Copper (Solder Material : 90/10 or 63/37 SnPb), 100%Sn Meets EIA Specification RSI86-91, ANSI/J-STD-002 Category 3. Reflow Condition (IR/Convection or VPR Reflow) tp TP Critical Zone T L to T P Temperature Ramp-up TL tL Tsmax Tsmin Ramp-down ts Preheat 25 t 25 °C to Peak Time Classification Reflow Profiles Profile Feature Average ramp-up rate (TL to TP) Preheat - Temperature Min (Tsmin) - Temperature Max (Tsmax) - Time (min to max) (ts) Time maintained above: - Temperature (T L) - Time (tL) Peak/Classificatioon Temperature (Tp) Time within 5°C of actual Peak Temperature (tp) Ramp-down Rate Sn-Pb Eutectic Assembly Pb-Free Assembly 3°C/second max. 3°C/second max. 100°C 150°C 60-120 seconds 150°C 200°C 60-180 seconds 183°C 60-150 seconds 217°C 60-150 seconds See table 1 See table 2 10-30 seconds 20-40 seconds 6°C/second max. 6°C/second max. 6 minutes max. 8 minutes max. Time 25°C to Peak Temperature Notes: All temperatures refer to topside of the package .Measured on the body surface. Copyright ANPEC Electronics Corp. Rev. B.3 - Oct., 2005 8 www.anpec.com.tw APM2055NU Classification Reflow Profiles(Cont.) Table 1. SnPb Entectic Process – Package Peak Reflow Temperature s Package Thickness Volume mm 3 Volume mm 3 <350 ≥350 <2.5 mm 240 +0/-5°C 225 +0/-5°C ≥2.5 mm 225 +0/-5°C 225 +0/-5°C Table 2. Pb-free Process – Package Classification Reflow Temperatures Package Thickness Volume mm 3 Volume mm 3 Volume mm 3 <350 350-2000 >2000 <1.6 mm 260 +0°C* 260 +0°C* 260 +0°C* 1.6 mm – 2.5 mm 260 +0°C* 250 +0°C* 245 +0°C* ≥2.5 mm 250 +0°C* 245 +0°C* 245 +0°C* *Tolerance: The device manufacturer/supplier shall assure process compatibility up to and including the stated classification temperature (this means Peak reflow temperature +0°C. For example 260°C+0°C) at the rated MSL level. Reliability Test Program Test item SOLDERABILITY HOLT PCT TST Method MIL-STD-883D-2003 MIL-STD 883D-1005.7 JESD-22-B, A102 MIL-STD 883D-1011.9 Description 245°C,5 SEC 1000 Hrs Bias @ 125°C 168 Hrs, 100% RH, 121°C -65°C ~ 150°C, 200 Cycles Carrier Tape & Reel Dimensions t E P Po D P1 Bo F W Ao Copyright ANPEC Electronics Corp. Rev. B.3 - Oct., 2005 D1 9 Ko www.anpec.com.tw APM2055NU Carrier Tape & Reel Dimensions (Cont.) T2 J C A B T1 Application TO-252 A B C J 330 ±3 100 ± 2 13 ± 0. 5 2 ± 0.5 F D D1 Po 7.5 ± 0.1 1.5 +0.1 T1 T2 16.4 + 0.3 2.5± 0.5 -0.2 1.5± 0.25 4.0 ± 0.1 W 16+ 0.3 - 0.1 P E 8 ± 0.1 1.75± 0.1 P1 Ao Bo Ko t 2.0 ± 0.1 6.8 ± 0.1 10.4± 0.1 2.5± 0.1 0.3±0.05 (mm) Cover Tape Dimensions Application TO- 252 Carrier Width 16 Cover Tape Width 13.3 Devices Per Reel 2500 Customer Service Anpec Electronics Corp. Head Office : No.6, Dusing 1st Road, SBIP, Hsin-Chu, Taiwan, R.O.C. Tel : 886-3-5642000 Fax : 886-3-5642050 Taipei Branch : 7F, No. 137, Lane 235, Pac Chiao Rd., Hsin Tien City, Taipei Hsien, Taiwan, R. O. C. Tel : 886-2-89191368 Fax : 886-2-89191369 Copyright ANPEC Electronics Corp. Rev. B.3 - Oct., 2005 10 www.anpec.com.tw