Data Sheet 29313D* 6118 VACUUM FLUORESCENT DISPLAY DRIVER A6118SLW 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 V BB 12 10 NC NC 11 Consisting of eight npn Darlington output stages and the associated common-emitter input stages, these drivers are designed to interface between low-level digital logic and vacuum fluorescent displays. Both devices are capable of driving the digits and/or segments of these displays and are designed to permit all outputs to be activated simultaneously. Pull-down resistors are incorporated into each output and no external components are required for most fluorescent display applications. With any device, the output load is activated when the input is pulled towards the positive supply (active ‘high’). The UDN6118A is furnished in a standard 18-pin plastic DIP; the A6118SLW is in a 20lead wide-body SOIC. Both units operate over the temperature range of -20°C to +85°C. These devices are also available for operation over the temperature range of -40°C to +85°C by changing the part number to UDQ6118A or A6118ELW. FEATURES ■ Digit or Segment Drivers Dwg. PP-064-3 ■ Low Input Current ■ Integral Output Pull-Down Resistors ■ High Output Breakdown Voltage ■ Single or Split Supply Operation ABSOLUTE MAXIMUM RATINGS at TA= +25°C ■ Automotive Capable Supply Voltage, VBB . . . . . . . . . . . . . . . 85 V Input Voltage, VIN . . . . . . . . . . . . . . . . . 20 V Output Current, IOUT . . . . . . . . . . . . -40 mA Allowable Package Power Dissipation, PD . . . . . . . . . . . . . . . . . . . . See Graph Operating Temperature Range, TA . . . . . . . . . . . . . . . . . -20°C to +85°C Storage Temperature Range, TS . . . . . . . . . . . . . . . -55°C to +150°C Caution: The high input impedance of these devices makes them susceptible to static discharge damage associated with handling and testing. Techniques similar to those used for handling MOS devices should be employed. Always order by complete part number, e.g., UDN6118A . 6118 VACUUM FLUORESCENT DISPLAY DRIVER PARTIAL SCHEMATIC UDN6118A ONE DRIVER (ALL TYPES) V 18 1 BB 30K 2 17 3 16 4 15 27K R IN 6 13 7 12 8 11 9 OUTPUT R B 125K GND Dwg. No. A-10,592C V BB 10 Dwg. PP-065 ALLOWABLE PACKAGE POWER DISSIPATION IN WATTS 15K INPUT 14 5 RIN RB 10 kΩ 30 kΩ 2.5 2.0 SUFFIX 'A', R θJA = 60°C/W 1.5 1.0 SUFFIX 'LW', R θJA = 70°C/W 0.5 0 25 50 75 100 125 AMBIENT TEMPERATURE IN °C 150 Dwg. GS-009-1 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000 Copyright © 1977, 2000 Allegro MicroSystems, Inc. 6118 VACUUM FLUORESCENT DISPLAY DRIVER ELECTRICAL CHARACTERISTICS (over operating temperature range) at VBB = 80 V. Characteristic Symbol Test Conditions Min. Limits Typ. Max. Units Output Leakage Current IOUT VIN = 0.4 V — — 15 µA Output OFF Voltage VOUT VIN = 0.4 V — — 1.0 V Output Pull-Down Current IOUT Input Open, VOUT = VBB 450 650 1100 µA Output ON Voltage VOUT VIN = 2.4 V, IOUT = -25 mA 77 78 — V VIN = 2.4 V — 120 225 µA VIN = 5.0 V — 375 650 µA All Inputs Open — 10 100 µA All Inputs = 2.4 V — 6.0 9.0 mA Min. Typ. Limits Max. Units Input ON Current Supply Current IIN IBB RECOMMENDED OPERATING CONDITIONS Characteristic Symbol Test Conditions Supply Voltage VBB 5.0 — 70 V Input ON Voltage VIN 2.4 — 15 V Output ON Current IOUT — — -25 mA NOTE: Positive (negative) current is defined as going into (coming out of) the specified device terminal. www.allegromicro.com 6118 VACUUM FLUORESCENT DISPLAY DRIVER TYPICAL MULTIPLEXED FLUORESCENT DISPLAY VBB SEGMENT SELECT b 1 a 2 17 f 3 16 g 4 15 e 5 14 d 6 13 c 7 12 dp 8 11 9 VBB 10 18 DIGIT SELECT UDN6118 D1 1 D2 2 17 D3 3 16 D4 D5 D6 4 15 5 14 6 13 D7 7 12 D8 8 11 9 VBB 10 18 VBIAS VFIL Dwg. No. A-10,261B 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000 6118 VACUUM FLUORESCENT DISPLAY DRIVER UDN6118A Dimensions in Inches (controlling dimensions) 18 0.014 0.008 10 0.430 MAX 0.280 0.240 0.300 BSC 1 0.070 0.045 0.100 0.920 0.880 9 0.005 BSC MIN 0.210 MAX 0.015 0.150 0.115 MIN 0.022 0.014 Dwg. MA-001-18A in Dimensions in Millimeters (for reference only) 0.355 0.204 10 18 10.92 MAX 7.11 6.10 7.62 BSC 1 1.77 1.15 2.54 23.37 22.35 9 0.13 BSC MIN 5.33 MAX 0.39 3.81 2.93 MIN 0.558 0.356 NOTES: 1. 2. 3. 4. Exact body and lead configuration at vendor’s option within limits shown. Lead spacing tolerance is non-cumulative. Lead thickness is measured at seating plane or below. Supplied in standard sticks/tubes of 21 devices. www.allegromicro.com Dwg. MA-001-18A mm 6118 VACUUM FLUORESCENT DISPLAY DRIVER A6118SLW Dimensions in Inches (for reference only) 20 11 0.0125 0.0091 0.419 0.394 0.2992 0.2914 0.050 0.016 0.020 0.013 1 2 0.050 3 0.5118 0.4961 0° TO 8° BSC 0.0926 0.1043 Dwg. MA-008-20 in 0.0040 MIN. Dimensions in Millimeters (controlling dimensions) 20 11 0.32 0.23 10.65 10.00 7.60 7.40 1.27 0.40 0.51 0.33 1 2 1.27 3 13.00 12.60 BSC 0° TO 8° 2.65 2.35 0.10 MIN. Dwg. MA-008-20 mm NOTES:1. Exact body and lead configuration at vendor’s option within limits shown. 2. Lead spacing tolerance is non-cumulative. 3. Supplied in standard sticks/tubes of 37 devices or add “TR” to part number for tape and reel. 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000 6118 VACUUM FLUORESCENT DISPLAY DRIVER The products described here are manufactured under one or more U.S. patents or U.S. patents pending. Allegro MicroSystems, Inc. reserves the right to make, from time to time, such departures from the detail specifications as may be required to permit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the user is cautioned to verify that the information being relied upon is current. Allegro products are not authorized for use as critical components in life-support devices or systems without express written approval. The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, Inc. assumes no responsibility for its use; nor for any infringement of patents or other rights of third parties which may result from its use. www.allegromicro.com 6118 VACUUM FLUORESCENT DISPLAY DRIVER HIGH-VOLTAGE (≥60 V) PERIPHERAL POWER AND DISPLAY DRIVERS IN ORDER OF 1) OUTPUT VOLTAGE, 2) OUTPUT CURRENT, 3) NUMBER OF DRIVERS Output Ratings* Serial Input Latched Drivers Features Diode Saturated Internal Clamp Outputs Protection V mA # Part Number † 60 -25 -25 -25 -25 -25 300 600 600 700 700 4000 8 10 12 20 32 4 4 4 4 4 4 – X X X X – – – – – – X X X X X – – – – – – – Active Pull-Down Active Pull-Down Active Pull-Down Active Pull-Down X – X X X X – – – – – X X X X X – – – – – – X X X X X – 5815 5810-F and 6809/10 5811 and 6811 5812-F and 6812 5818-F and 6818 2557 2547 2549 2559 2543 2944 80 -350 350 350 -350 1500 4000 8 8 8 8 4 4 – X X X – – – X X X – – X – X X – X – – – – – – – – – – – – 2983 and 2984 5822 5842 5890 2065 and 2069 2879 85 -25 8 – – – – – 6118 95 300 300 350 350 7 8 7 8 – – – – – – – – X X X X – – – – – – – – 2023 2823 2024 2824 135 250 7 – – X – – 7003 * Current is maximum test condition; voltage is absolute maximum allowable. Negative current is defined as coming out of (sourcing) the output. † Complete part number includes additional characters to indicate operating temperature range and package style. 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000